A box like seating arrangement which accommodates up to 4 people. This is part of Instructables by Biji-biji Initiative Series, staying true to our Open Source commitments.

1. Wire mesh Seating Assembly - A box like seating
arrangement which; can accommodate four persons. It is
made from steel frames, wire mesh and coated with paint.
Wire Mesh Furniture
Instructables by Biji-biji Initiative

2. Materials Tools
• Steel frames ( 1” cross section)
• Angle bars
• Wire mesh
• Marker / Chalk
• Tape Measure
• Safety gear
• Welding machine
• Table Saw or Drop Saw
• Angle Grinder or Metal cutter
Materials and Tools Checklist:
Wire Mesh Furniture
Instructables by Biji-biji Initiative

3. 6’
4’
6’
2’
2’
• Use a marker to mark the dimensions shown below on the steel
bars.
• This will form the framework.
Wire Mesh Furniture
4’
STEP 1 Instructables by Biji-biji Initiative

4. • Cut them using the drop saw.
• Refer to the diagram and weld the frames together.
• Cut 6 bars each 15” in length and weld them to the base frame
at all the corners.
Wire Mesh Furniture
STEP 2 Instructables by Biji-biji Initiative

5. • Complete the framework as shown.
• Once the framework is done, place the
wire mesh aligning it with one corner.
• Use a marker to trace the frame size onto the wire mesh.
• Remove and cut the wire mesh to the correct size using a metal cutter.
Wire Mesh Furniture
Metal Cutter
STEP 3 Instructables by Biji-biji Initiative

6. • Repeat this for the side faces also.
• Weld the wire mesh to the frame.
• Use a tape measure to check the dimensions end to end
including the wire mesh.
Wire Mesh Furniture
STEP 4 Instructables by Biji-biji Initiative

7. • Mark these dimensions on the angle
bars and cut them accordingly.
• Now weld the angle bars onto the edges
of the frame, covering the sharp wire mesh.
• Repeat the procedure for all edges
except the base.
• Paint the assembly ;
allow it to dry and its ready to go!
Wire Mesh Furniture
STEP 5 Instructables by Biji-biji Initiative