Which of these worms are segmentedA.annelidsB.planariansC.rou.pdf
•
0 likes•13 views
Which of these worms are segmented? A.annelids B.planarians C.roundworms D.flukes E.All worms are segmented Solution Choice A iscorrect. Reason: Phylum annelida represents worms with segmented body. They also have radial symmetry and small segments can be found on their body. These segments are true segments in nature which means that external segment corresponds to internal segmentation. Further, the ventral parts of these segments also contain pseudopodia in some annelids. Thus, annelids represent true segmented bodies such as in earthworm..
Report
Share
Report
Share
Download to read offline
Recommended
Describe the three ways in which protists can move. Provide an examp.pdf
Describe the three ways in which protists can move. Provide an example of a protist that uses
each type of motion.
Solution
The three ways in which protists can move are by using
1. Cilia :-Cilia are tiny hair like projections that extend from their surfaces or from within the
cell. Cilia enable protist to move in rhythmical fashion as they swim through the water. Cilia also
helps protist to capture food.
Example - Paramecium
2. Flagella - These are long, whiplike structures. Protist can have one or more flagellar
structures.Flagella help protists move staedily through currents and waves
Example- Giardia
3. Pseudopodia- Thsi is another type of locomotion.Protist moves by extending its body forward
and then pulling rest of the body forward as well. The finger-like structure which the protist
project forward is called pseudopod. Pseudopod is also used to trap food.
Example - Amoeba.
A woman with type O blood gave birth to a baby, also with type O bloo.pdf
A woman with type O blood gave birth to a baby, also with type O blood. The woman states a
man with type AB blood was the father of the baby. The antigen determining gene for blood type
has three alleles I^A, I^B, i. a. How many phenotypes are possible? b. How many genes play a
factor in this phenotype? c. How is this example different from a typical Mendelian cross? What
extension is displayed? d. Is there any merit to her statement? Why?
Solution
The mother has O blood group, thus i, i would be the genotype of the mother as blood type O is
recessive. There are three genes that play a role in this cross.
A parent of blood type AB has the codominant IA and IB alleles.
When the parents would mate , there would be IA , IB crossing with i. As a result , out of the
four offsprings , two will contain IAi and two would contain IBi genotype, I.e. Half of the
children would have type A and half would have type B blood group.
For a woman with O blood group, the father should also have O blood group. Thus there is no
merit to her statement..
A 15 (ww) solution of BaCl2 in water has a density of 1.12 gmL..pdf
A 15% (w/w) solution of BaCl2 in water has a density of 1.12 g/mL.
What is the concentration of the same solution expressed as molarity? How many moles of
chloride ions are in 25.0 mL of the BaCl2 solution?
Solution
Molarity = (% w/w x d x 10 / MW)
Molarity = (15 x 1.12 x 10 / 208.23)
Molarity = 0.807 M
moles = Molarity x V in L
moles = 0.807 x 25/1000
moles = 0.0202.
Use the Internet to research one of the four modes of transportation.pdf
Use the Internet to research one of the four modes of transportation, and describe its impact on
the transportation industry. In addition, explain how the mode of transportation was selected, and
compare it to the other three modes not selected
Solution
There are different modes of transportation like air, water and land transportation. some others
like pipelines, cable and space transportation etc. Generally transportation is used to move
people, animals, and other materials from one place to other. every mode of transportation has its
different impact on the transportation industry.
HERE I AM GOING TO DISCUSS THE IMPACT OF AIR TRANSPORTATION ON
TRANSPORTATION INDUSTRY:
Air transportation is one of safest and most efficient means of transportation, it covers whole
nation and internation distances. Just because of this mode, global trade is possible and one can
live in other countries.
* it provides worldwide transportation network, which helps in global business and tourism.
* air transport adds 40% of export of goods in total value of export. 40% is very huge amount.
and it automatically adds to GDP of country.
* Travel system allows intercontinental travel to large volumes of the passengers & cargo in
short periods of time.
* The air transportation mode is vital for the growth of the business and industry in the
community, providing air access to companies that are must to meet the demands and supply,
competition & expanding marketing areas.
* those Communities which do not have airports or some sufficient air services, have limitations
placed on the capacity for the economic growth.
NOW I AM GOING TO DISCUSS SOME POINTS REGARDING WHY AIR
TRANSPORTATION IS PREFFERED OVER OTHER TRANSPORTATION:
* It is the fastest and unbroken mode of transportation as compared to other modes.
* No doubt it is one of the most expensive mode but its rapidity characteristics has overcome
this limitation.
* as compared to other modes, it is more comfortable, efficient and quick service.
* one of the most point is that, this mode does not require any investment in construction of any
tracks and paths as it is very much required in other modes.
* their is no physical barrires while execution of service..
What are the proteins involved in this functions In lecture we dis.pdf
What are the proteins involved in this functions?? In lecture we discussed the process by which
cells migrate, which includes protrusion, attachment, translocation, and detachment. Please do
the following in the space below: 1) draw you own version of Fig 14 - 27 (label the lamellipodia,
filipodia, points of adhesion, direction of movement), 2) label each of the 3 steps represented and
describe (in your own words) what happens at each step, and 3) list the proteins involved in each
step and describe (in your own words) what those protein are doing.
Solution
The protein involved in each of the above step and its functions are-:
1.Protrusion step
i) Arp 2/3 - It is a heptamer protein that attaches itself to the side of a pre existing actin filament
and then nucleates de novo actin polymerisation at a fixed angle.
ii) Actin - Multiple functional protein involved in protein - protein interaction.
iii) Cofilin - It is an actin - filament serving protein helps in actin polymerisation.
2. Attachment step
i) Integrin - Adhesion to the substratum occur mainly via Integrin.
ii) Paxillin and FAK - The two important signalling proteins involved in adhesion.
iii) Talin, vinculin and alpha actinin- These are the group of adhesion proteins link actin to
substratum through integrin.
4. Translocation step
i) Myosin II and dynein - These proteins controls translocation step.
4. Detachment step
i) Actomyosin - This protein is the combination of actin and myosin involved in contraction that
exert force against adhesion results in detachment..
what are the best way to query optimization in MYSQL.SolutionT.pdf
what are the best way to query optimization in MYSQL.
Solution
The best way to query optimization in MYSQL is as below.
1.INDEXES:It behaves as a pointers to row of a table. MYSQL permits us to index data
tables.computing the index to a table is nothing but calling the CREAYTE INDEX command
,defining the feilds to index.nearly 16 indexes is possible for a table. Additionally the MYSQL
assiststhe multi column indexes and full text search indexes.
Additionally to query optimization in MYSQL.
1.Optimizing the query perfomance:during the examination of query perfomance,it is in service
to review the EXPLAIN keyword. it is kept before a select query ,tells how MYSQL aims to
execute the query and rows required to process .
2.Modifying the internal variables: MYSQL is much open and reasonably simple additonally
fine-tune its default settings to get high perfomance and stability..
Using Social Media to Tell the Story of TOMS TOMS offers more than a.pdf
Using Social Media to Tell the Story of TOMS TOMS offers more than a comfortable and trendy
pair of shoes. It is about status and a story to tell. Mycoskie realised the power of the TOMS
story since the early days of the company and has focused on it ever since. Mycoskie wrote in his
book, acknowledging Kendall Haven, who authored Super Simple Storytelling: \"Human minds
rely on stories and story architecture as the primary road map for understanding, making sense
of, remembering, and planning our lives - as well as the countless experiences and narratives we
encounter along the way.\" He added that smart, future-oriented companies use this ancient
impulse in new ways, by telling stories that people can watch on YouTube and share on
Facebook. He quickly realised the strength of social and digital media to convey his story by
saying: \"People are no longer all listening to or watching the same few radio or TV stations each
week - they\'re following their own carefully curated Twitter feeds, commenting on and creating
blogs, channel surfing among more than 500 TV stations, watching Hulu on laptops, clicking on
YouTube, reading Kindles and Nooks, and surfing on iPads.\" In 2009, Mycoskie partnered with
AT&T by filming a commercial, which ran throughout 2009 and was an enormous success. The
commercial profiled TOMS as a for-profit company that donates one pair of shoes to a child in
need for every pair purchased, and founder Blake who uses his AT&T BlackBerry to conduct
business from around the world. Lots of people tweeted about the commercial creating
awareness about TOMS and AT&T, and support for the TOMS business model. 1- Discuss in
your opinion, does business responsible for its society wellbeing or just making profit? Why? 2-
How TOMS shoes utilizes the CSR in its marketing activities?
Solution
The traditional goal of firm is profit maximisation. The US supreme court in Dodge vs Ford
motors Co has come to the view that profit maximisation for owners should be preferred. But
this view is not given that much importance today. Today corporates are being viewed as
responsible to society. Infact research has revealed that 55% customers were ready to purchase
products of company at higher prices provided it engaged in CSR. So these goals are not
mutually lay exclusive. Dodd had rightly said business organisation is an economic institution
which has social service as well as profit maximisation function
2 Tom\'s shoes utilises CSR in its marketing activities. It is saying that it will donate one pair of
shoes to the deserving for every pair of shoes it sells. In this way it is appealing to the social
conscious individuals and showing them that it is contributing to the cause of society and is not
just interested in profit making.
The _____ were Roman merchantsSolutionCorrect AnswerPlebeia.pdf
The _____ were Roman merchants
Solution
Correct Answer:
Plebeians
Explanation:
People were divided into the two social classes. The Plebeians were the one social class that
were merchants or involved in other production activities. Another social class was Patricians
who were the ruling class in Rome..
Recommended
Describe the three ways in which protists can move. Provide an examp.pdf
Describe the three ways in which protists can move. Provide an example of a protist that uses
each type of motion.
Solution
The three ways in which protists can move are by using
1. Cilia :-Cilia are tiny hair like projections that extend from their surfaces or from within the
cell. Cilia enable protist to move in rhythmical fashion as they swim through the water. Cilia also
helps protist to capture food.
Example - Paramecium
2. Flagella - These are long, whiplike structures. Protist can have one or more flagellar
structures.Flagella help protists move staedily through currents and waves
Example- Giardia
3. Pseudopodia- Thsi is another type of locomotion.Protist moves by extending its body forward
and then pulling rest of the body forward as well. The finger-like structure which the protist
project forward is called pseudopod. Pseudopod is also used to trap food.
Example - Amoeba.
A woman with type O blood gave birth to a baby, also with type O bloo.pdf
A woman with type O blood gave birth to a baby, also with type O blood. The woman states a
man with type AB blood was the father of the baby. The antigen determining gene for blood type
has three alleles I^A, I^B, i. a. How many phenotypes are possible? b. How many genes play a
factor in this phenotype? c. How is this example different from a typical Mendelian cross? What
extension is displayed? d. Is there any merit to her statement? Why?
Solution
The mother has O blood group, thus i, i would be the genotype of the mother as blood type O is
recessive. There are three genes that play a role in this cross.
A parent of blood type AB has the codominant IA and IB alleles.
When the parents would mate , there would be IA , IB crossing with i. As a result , out of the
four offsprings , two will contain IAi and two would contain IBi genotype, I.e. Half of the
children would have type A and half would have type B blood group.
For a woman with O blood group, the father should also have O blood group. Thus there is no
merit to her statement..
A 15 (ww) solution of BaCl2 in water has a density of 1.12 gmL..pdf
A 15% (w/w) solution of BaCl2 in water has a density of 1.12 g/mL.
What is the concentration of the same solution expressed as molarity? How many moles of
chloride ions are in 25.0 mL of the BaCl2 solution?
Solution
Molarity = (% w/w x d x 10 / MW)
Molarity = (15 x 1.12 x 10 / 208.23)
Molarity = 0.807 M
moles = Molarity x V in L
moles = 0.807 x 25/1000
moles = 0.0202.
Use the Internet to research one of the four modes of transportation.pdf
Use the Internet to research one of the four modes of transportation, and describe its impact on
the transportation industry. In addition, explain how the mode of transportation was selected, and
compare it to the other three modes not selected
Solution
There are different modes of transportation like air, water and land transportation. some others
like pipelines, cable and space transportation etc. Generally transportation is used to move
people, animals, and other materials from one place to other. every mode of transportation has its
different impact on the transportation industry.
HERE I AM GOING TO DISCUSS THE IMPACT OF AIR TRANSPORTATION ON
TRANSPORTATION INDUSTRY:
Air transportation is one of safest and most efficient means of transportation, it covers whole
nation and internation distances. Just because of this mode, global trade is possible and one can
live in other countries.
* it provides worldwide transportation network, which helps in global business and tourism.
* air transport adds 40% of export of goods in total value of export. 40% is very huge amount.
and it automatically adds to GDP of country.
* Travel system allows intercontinental travel to large volumes of the passengers & cargo in
short periods of time.
* The air transportation mode is vital for the growth of the business and industry in the
community, providing air access to companies that are must to meet the demands and supply,
competition & expanding marketing areas.
* those Communities which do not have airports or some sufficient air services, have limitations
placed on the capacity for the economic growth.
NOW I AM GOING TO DISCUSS SOME POINTS REGARDING WHY AIR
TRANSPORTATION IS PREFFERED OVER OTHER TRANSPORTATION:
* It is the fastest and unbroken mode of transportation as compared to other modes.
* No doubt it is one of the most expensive mode but its rapidity characteristics has overcome
this limitation.
* as compared to other modes, it is more comfortable, efficient and quick service.
* one of the most point is that, this mode does not require any investment in construction of any
tracks and paths as it is very much required in other modes.
* their is no physical barrires while execution of service..
What are the proteins involved in this functions In lecture we dis.pdf
What are the proteins involved in this functions?? In lecture we discussed the process by which
cells migrate, which includes protrusion, attachment, translocation, and detachment. Please do
the following in the space below: 1) draw you own version of Fig 14 - 27 (label the lamellipodia,
filipodia, points of adhesion, direction of movement), 2) label each of the 3 steps represented and
describe (in your own words) what happens at each step, and 3) list the proteins involved in each
step and describe (in your own words) what those protein are doing.
Solution
The protein involved in each of the above step and its functions are-:
1.Protrusion step
i) Arp 2/3 - It is a heptamer protein that attaches itself to the side of a pre existing actin filament
and then nucleates de novo actin polymerisation at a fixed angle.
ii) Actin - Multiple functional protein involved in protein - protein interaction.
iii) Cofilin - It is an actin - filament serving protein helps in actin polymerisation.
2. Attachment step
i) Integrin - Adhesion to the substratum occur mainly via Integrin.
ii) Paxillin and FAK - The two important signalling proteins involved in adhesion.
iii) Talin, vinculin and alpha actinin- These are the group of adhesion proteins link actin to
substratum through integrin.
4. Translocation step
i) Myosin II and dynein - These proteins controls translocation step.
4. Detachment step
i) Actomyosin - This protein is the combination of actin and myosin involved in contraction that
exert force against adhesion results in detachment..
what are the best way to query optimization in MYSQL.SolutionT.pdf
what are the best way to query optimization in MYSQL.
Solution
The best way to query optimization in MYSQL is as below.
1.INDEXES:It behaves as a pointers to row of a table. MYSQL permits us to index data
tables.computing the index to a table is nothing but calling the CREAYTE INDEX command
,defining the feilds to index.nearly 16 indexes is possible for a table. Additionally the MYSQL
assiststhe multi column indexes and full text search indexes.
Additionally to query optimization in MYSQL.
1.Optimizing the query perfomance:during the examination of query perfomance,it is in service
to review the EXPLAIN keyword. it is kept before a select query ,tells how MYSQL aims to
execute the query and rows required to process .
2.Modifying the internal variables: MYSQL is much open and reasonably simple additonally
fine-tune its default settings to get high perfomance and stability..
Using Social Media to Tell the Story of TOMS TOMS offers more than a.pdf
Using Social Media to Tell the Story of TOMS TOMS offers more than a comfortable and trendy
pair of shoes. It is about status and a story to tell. Mycoskie realised the power of the TOMS
story since the early days of the company and has focused on it ever since. Mycoskie wrote in his
book, acknowledging Kendall Haven, who authored Super Simple Storytelling: \"Human minds
rely on stories and story architecture as the primary road map for understanding, making sense
of, remembering, and planning our lives - as well as the countless experiences and narratives we
encounter along the way.\" He added that smart, future-oriented companies use this ancient
impulse in new ways, by telling stories that people can watch on YouTube and share on
Facebook. He quickly realised the strength of social and digital media to convey his story by
saying: \"People are no longer all listening to or watching the same few radio or TV stations each
week - they\'re following their own carefully curated Twitter feeds, commenting on and creating
blogs, channel surfing among more than 500 TV stations, watching Hulu on laptops, clicking on
YouTube, reading Kindles and Nooks, and surfing on iPads.\" In 2009, Mycoskie partnered with
AT&T by filming a commercial, which ran throughout 2009 and was an enormous success. The
commercial profiled TOMS as a for-profit company that donates one pair of shoes to a child in
need for every pair purchased, and founder Blake who uses his AT&T BlackBerry to conduct
business from around the world. Lots of people tweeted about the commercial creating
awareness about TOMS and AT&T, and support for the TOMS business model. 1- Discuss in
your opinion, does business responsible for its society wellbeing or just making profit? Why? 2-
How TOMS shoes utilizes the CSR in its marketing activities?
Solution
The traditional goal of firm is profit maximisation. The US supreme court in Dodge vs Ford
motors Co has come to the view that profit maximisation for owners should be preferred. But
this view is not given that much importance today. Today corporates are being viewed as
responsible to society. Infact research has revealed that 55% customers were ready to purchase
products of company at higher prices provided it engaged in CSR. So these goals are not
mutually lay exclusive. Dodd had rightly said business organisation is an economic institution
which has social service as well as profit maximisation function
2 Tom\'s shoes utilises CSR in its marketing activities. It is saying that it will donate one pair of
shoes to the deserving for every pair of shoes it sells. In this way it is appealing to the social
conscious individuals and showing them that it is contributing to the cause of society and is not
just interested in profit making.
The _____ were Roman merchantsSolutionCorrect AnswerPlebeia.pdf
The _____ were Roman merchants
Solution
Correct Answer:
Plebeians
Explanation:
People were divided into the two social classes. The Plebeians were the one social class that
were merchants or involved in other production activities. Another social class was Patricians
who were the ruling class in Rome..
The functions f_1, f_2, ..., f_m defined on the interval I are said t.pdf
The functions f_1, f_2, ..., f_m defined on the interval I are said to be linearly dependent on I if
at least one of them can be expressed as a linear combination of the others on I. Equivalently,
they are linearly dependent on I if there exist constants c_1, c_2, ..., c_m, not all zero, such that
c_1 f_1 (x) + c_2 f_2 (x) + middot middot middot + c_m f_m (x) = 0 for all x I. Otherwise, they
are said to be linearly independent on I. Show that the functions f_1 (x) = e^x f_2 (x) = e^-2x
f_3 (x) = 3e^x - 2e^-2x are linearly dependent on (-infinity, infinity).
Solution
Given that
f1(x) = ex , f2(x) = e-2x and f3(x) = 3ex - 2e-2x
Then there exists non-zero constants C1 = - 3 , C2 = 2 and C3 = 1 such that C1f1(x) + C2 f2(x) +
C1f3(x) = 0.
Hence The functions f1( x) = ex , f2(x) = e-2x and f3(x) = 3ex - 2e-2x are linearly dependent for
all x *( - , ).
Silica gel is slightly acidic. Will this cause an acidic compound to.pdf
Silica gel is slightly acidic. Will this cause an acidic compound to run faster or slower in a given
mobile phase vs a similar basic compound? Why?
Solution
SiO2 is an acidic compound.when SiO2 in water gives acid H2SiO3.
In acidic or basic condition, mainly depends upon polarity. Polar compounds easily hydrogen
bonding with silica gel and make highly mobile phase polar.
Polar.compounds bind with silica gel easily whereas nonpolar compounds easily will come in the
column chromatography..
Rank the four substances from least to most polar, Ethanol, pentanol.pdf
Rank the four substances from least to most polar, Ethanol, pentanol, kerosene, and water?
Solution
H2O is most polar .
Alcohols are polar .But in alcohols carbon atoms are increases polar nature is decreases.
Kerosene is non polar .It is least polar .
Kerosene>pentanol> ethanol > water >>>>answer.
Compare and contrast the main approaches for developing a WBS. Which.pdf
Compare and contrast the main approaches for developing a WBS. Which approach do you feel
is most user-friendly? Explain your answer.
Solution
The main approaches for WBS development are as follows:
1. Deliverable based approach:
The project team works as per the functional components of the products. Here the process are
compiled and accomplished as per the elements that constitutes the complete project.
2. Task Based:
The tasks to create the project deliverable are first identified and are prioritized. This is also
known as verb based method.
3. Time based:
The projects are divided as per the completing and delivery time so that the projects that are to be
delivered first can be worked upon by the team.
4. Cost based.
The project is defined in terms of cost.
The following methods are used for developing a WBS:
1. Top-Down Approach:
The steps involved in the top-down process are as follows:
This approach is appropriate when the project members are greenhorn to WBS development and
the project\'s nature is complex and ambiguous.
2. Bottom-Up Approach:
The steps involved in the bottom-up process are as follows:
This method is applicable when the nature of the project, project scope, and life cycle is clear.
Bottom-up method is more user friendly as the appropriate templates and organizational
standards are available..
PROBLEM 4 Run runTerribleLoop for one hour. You can stop the prog.pdf
* PROBLEM 4: Run runTerribleLoop for one hour. You can stop the program using the red
\"stop\" square in eclipse. Fill in the OUTPUT line below with the
numbers you saw LAST --- edit the line, replacing the two ... with what you saw:
*
* OUTPUT: terribleFibonacci(...)=... // TODO
*
* Comment: the code uses \"long\" variables, which are like \"int\", but
* bigger. It\'s because fibonacci numbers get really big really fast.
*/
public static void runTerribleLoop () {
for (int N = 0; N < 100; N++)
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", N, terribleFibonacci (N));
}
public static void runTerribleSomeValues () {
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 13, terribleFibonacci (13));
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 7, terribleFibonacci (7));
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 21, terribleFibonacci (21));
}
public static long terribleFibonacci (int n) {
if (n <= 1) return n;
return terribleFibonacci (n - 1) + terribleFibonacci (n - 2);
}
Solution
I think you are looking for Fibonacci program, as you have mentioned it as
TODO in the question.
Please find the Fibonacci program as below.
public static long terribleFibonacci(long n){
// declare 2 numbers to hold the results.
// n1 and n2 hold initial values i.e. 0 and 1.
long n1=0;
long n2=1;
long n3;
for(int i=2;i.
please help! READ th.pdf
***please help! READ the grading criteria***
HW5: Weekly Timesheet CSS 161 Fundamentals of Computing By: Hansel Ong Summary In
HW3, you created a program that allows the user to enter time worked on a week-by-week basis
Such a system calculated any hours worked over 40 hours a week as overtime. However, this
means that an employee could work 12 or 20 hours once a week, 4 hours the rest of the week,
and not be paid overtime at all. Let\'s fix this problem in this homework. For simplification, let\'s
limit the number of weeks the user can enter to two weeks maximum. Note also that any hours
worked in a day beyond 8 hours should be regarded as overtime hours. Estimated Work Needed
This assignment took me about 30-45 minutes to write (not including challenges, but including
testing, commenting, and cleanup) in less than 200 lines of code In other words, you should
expect to spend between 135 to 450 minutes working on this assignment. If you\'ve spent more
than 7.5 hours working on this assignment, then you are likely struggling with loops and/or
arrays and should re-read the lecture slides and attempt the exercises within seek help from your
fellow classmates, myself, your lab instructor, QSC tutor as well as online resources. Skills
Expected All the skills from previous Assignment(s) Arrays File I/O Assignment Description
Write a program that does the following Provide the following \"main menu\" to the user (Create
a method for each of the choices): o (1 point) Enter/Edit Timesheet o (1 point) Display
Timesheet o (1 point) Print Paystub (End Program) o (1 point) Keep presenting this menu to the
user until user asks to print a paystub For \"Enter/Edit Timesheet\" o (1 point) Ask the user
which week the user would like to edit (1 or 2) (1 point) Return to \"main menu\" if user chooses
anything other than 1 or 2 o (2 points) Display each day of the week (M, Tu, W and the number
of hours worked for each day (display 0 by default until user has entered a value) (2 point) Allow
the user to edit hours for specific days of the week (1 point) Return to \"main menu\" if user
enters an invalid day of the week or invalid hours of the day
Solution
// Paystub.java
import java.util.Scanner;
public class Paystub
{
static int insuranceDeduction = 25;
static int regularHours1 = 0;
static int overtimeHours1 = 0;
static int regularHours2 = 0;
static int overtimeHours2 = 0;
static int[] week1 = new int[7];
static int[] week2 = new int[7];
public static int mainMenu()
{
System.out.println(\"\ \ --------------Main Menu----------------\");
System.out.print(\"1. Enter/Edit Timesheet\ 2. Display Timesheet\ 3. Print Paystub (End
program)\ Please choose from the above options: \");
Scanner keyboard = new Scanner (System.in);
int choice = keyboard.nextInt();
return choice;
}
public static void inputHours()
{
Scanner keyboard = new Scanner (System.in);
System.out.print(\"Which week Would you like to enter/edit(1 or 2): \");
int week = keyboard.nextInt();
if(week == 1)
{
for.
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of.pdf
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of output that included
“Happiness.” In class we also saw that former Senator Robert F. Kennedy criticized GDP for its
inability to take into account the quality of life of a nation’s citizens. In 2013, President Obama
has appointed you to look into developing a new measure of the nation’s overall economic well-
being called the Gross Domestic Happiness Indicator (GDHI). What would you include in this
new measure and how will you incorporate existing measures of GDP into the GDHI?
Solution
Ans
I will include Gdp per capita, measures of social support, life expectancy at birth, corruption and
nepotism, freedom to choose,pollution, public goods, environmental goods in thus measure. Gdp
per capita is the existing measure that I will utilize..
Identify and explain, in order of occurrence, the four primary phase.pdf
Identify and explain, in order of occurrence, the four primary phases to an IT
auditPhaseExplanation1.2.3.4.
Solution
1.planning : in planning phase auditor must gain sufficient knowledge on companyes business
and financial reporting system
2. Tests of control : these are audit procedure designed to evaluate operating effectiveness of
control system
3. Substantive tests: these are examination of financial statements with underlying supporting
documents and ensuring accuracy and correctness of posting
4. Audit reporting : it is an opinion of auditor on financial statements that is weather they are all
prepared in all material respects and discloses any defects
he may issue either qualified ( adverse) / unqualified ( good) based on the information obtained
in audit
thank you.
IA 31 The reweycir deseers.ostains 4phaws G1,2, s, and M panes .pdf
IA 31 The reweycir deseers.ostains 4phaws: G1,2, s, and M panes: An aticb plae DNA is
dupwcase f: ah---X c) In which gkesacus the final divinion: 26 Mitosis Meiosis many DNA
duplicatson esamber of daughter cells ordpEoids Aery cells are genetically identical or dissimilar
C
Solution
Ans 1 a consecutive order of cell cycle phases is G1 , S , G2 and M
B. DNA duplicates in S phase (synthesis phase)
C. The final division of cells occurs in M phase
D. The four phases of mitosis are prophase, metaphase, anaphase and telophase.
I am getting an errormsg 911, Level 16, State 1, Line 12 Database.pdf
I am getting an error:
msg 911, Level 16, State 1, Line 12 Database \'MyWebDB\' does not exist. Make sure that the
name is entered correctly.
This is my homework I am needing to implement this into a create table MyWebDB and I have
the error, what have I done incorrectly?
--Write a script that implements the following design in a database named MyWebDB: --In the
Downloads table, the UserID and ProductID columns are the foreign keys. --Include a statement
to drop the database if it already exists. --Include statements to create and select the database. --
Include any indexes that you think are necessary.
DROP DATABASE MyWebDB;
CREATE Database MyWebDB;
USE MyWebDB
Create table users (
UserID int,
EmaiAddress varchar(255),
FirstName varchar(255),
LastName varchar(255),
Constraint pk_UserIDPRIMARYKEY (UserID)
);
Create table Products (
ProductsID int,
ProductName varchar(255),
Constraint pk_ProductsIDPRIMARYKEY (ProductsID)
);
Create table Downloads (
DownloadID int,
DownloadDate Date,
FileName varchar(255),
ProductsID int,
UserID int,
Constraint fk_ProDownloadFOREIGNKEY (ProductsID)
References Products (ProductsID),
Constraint fk_UsersDownloadFOREIGNKEY (UserID)
References Users (UserID)
);
Solution
I ran the same queries on my machine it is working fine..
Script which will implement the above design :
MyWebDB::
USE [master]
GO
/****** Object: Database [MyWebDB] Script Date: 22-11-2016 15:41:32 ******/
CREATE DATABASE [MyWebDB]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N\'MyWebDB\', FILENAME = N\'c:\\Program Files\\Microsoft SQL
Server\\MSSQL11.SQL2012\\MSSQL\\DATA\\MyWebDB.mdf\' , SIZE = 4160KB , MAXSIZE
= UNLIMITED, FILEGROWTH = 1024KB )
LOG ON
( NAME = N\'MyWebDB_log\', FILENAME = N\'c:\\Program Files\\Microsoft SQL
Server\\MSSQL11.SQL2012\\MSSQL\\DATA\\MyWebDB_log.ldf\' , SIZE = 1040KB ,
MAXSIZE = 2048GB , FILEGROWTH = 10%)
GO
ALTER DATABASE [MyWebDB] SET COMPATIBILITY_LEVEL = 110
GO
IF (1 = FULLTEXTSERVICEPROPERTY(\'IsFullTextInstalled\'))
begin
EXEC [MyWebDB].[dbo].[sp_fulltext_database] @action = \'enable\'
end
GO
ALTER DATABASE [MyWebDB] SET ANSI_NULL_DEFAULT OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_NULLS OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_PADDING OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_WARNINGS OFF
GO
ALTER DATABASE [MyWebDB] SET ARITHABORT OFF
GO
ALTER DATABASE [MyWebDB] SET AUTO_CLOSE ON
GO
ALTER DATABASE [MyWebDB] SET AUTO_CREATE_STATISTICS ON
GO
ALTER DATABASE [MyWebDB] SET AUTO_SHRINK OFF
GO
ALTER DATABASE [MyWebDB] SET AUTO_UPDATE_STATISTICS ON
GO
ALTER DATABASE [MyWebDB] SET CURSOR_CLOSE_ON_COMMIT OFF
GO
ALTER DATABASE [MyWebDB] SET CURSOR_DEFAULT GLOBAL
GO
ALTER DATABASE [MyWebDB] SET CONCAT_NULL_YIELDS_NULL OFF
GO
ALTER DATABASE [MyWebDB] SET NUMERIC_ROUNDABORT OFF
GO
ALTER DATABASE [MyWebDB] SET QUOTED_IDENTIFIER OFF
GO
ALTER DATABASE [MyWebDB] SET RECURSIVE_TRIGGERS OFF
GO
ALTER DATABASE [MyWebDB] SET ENABLE_BROKER
GO
ALTER DATABASE [MyWebDB] SET AUTO_UPDATE_STATISTICS_ASYNC OFF
GO
ALTER DATABASE [MyWebDB] SET DATE_CORREL.
How do you do the last page. How do you make the picture with the t.pdf
How do you do the last page?. How do you make the picture with the trail. I\'ve coded
everything but that need help with how to change the numbers in the matrix to produce the
correct trail. Coded in C please. How
Do u code the function ask of on the last page? CS 100 Project Six-Fall 2016 Project Ovenicy:
The world is not flat, despite what the Flat Earth Society hupsLAww:a.theflatearthsociety.org)
says. There are lots of hills and valleys out there. Given this, mankind has spent considerable
time and effort measuring the exactelevation above sea level for each on the earth You can view
these elevation maps as a two- dimensional grid. A sample elevation shown below: 100 110 120
105 115 100 105 115 110 100 105 115 95 120 120 98 95 110 125 130 135 100 110 120 130 135
145 Obviously, elevations get higher in the mountains, and approach zero as you near the ocean.
This program reads a set of elevation data and: 1. Generates a simple image from this clevation
data, a black-and-white image where higher clevations have a darker shade than lower
elevations. 2. Identifies a path across this grid. The path can be North-to-South, South-to-North,
East-to-West, or West- to East. To find this path, you vant to minimize your clevation gain
(climb). In other words, you don\'t want to walk uphill any more than necessary. Instead, you
want to go as much as possible, a steep downhill path is viewed as optimal. You will generate a
second image file with the recommended trail. To generate a black-and-white (grayscale) picture
of this elevation data, we will use a graphics format that uses ASCII (text files. Most graphics
programs use binary files (gif,jpeg, etc) which promote smaller fle sizes. Since this is just CS
100, well stick with ASCII (text) files, even though they take more space. The ASCII format we
use is called pgm, and is shown P2 at the right. The first line is always P2. After that, you width
inpix have three values (width, height, grayscale levels that pixels value (always 2SS for this
project) maximum grayscale can be on a single line or separate lines. Finally, you pixel-11-
intensity pixel-1-2-intensity pixel-1-3-intensity have the actual pixel values for each pixel in the
image. pixel-2-1-intensity pixel2-2-intensity pixel-2-3-intensity A pixel with a value of 0 is black
(absence of light and a pixel with a value of 255 is white (all light pielN-1 intensity pixelN-2-
intensity pixel-N-3intensity This project involves taking a set of elevations and making a
grayscale image from these elevations, and then drawing a second image that includes a trail
across the grid. You are crcating two PEm images. Both of these images will use 255 as the
maximum grayscale value (values range from 0-255) The first image is simply a map of the
clevations. So that we can mark a visible trail on this map part two), we will map all the
clevations in our input file to a value in the range of 55255. By doing this, placing a trail of color
0 (black) is easily visible o.
How do auditors gain an understanding of the internal controls in an.pdf
How do auditors gain an understanding of the internal controls in an IT environment?
Solution
The control environment is the foundation on which an effective system of internal control is
built and operated in an organization that strives to
(1) achieve its strategic objectives,
(2) provide reliable financial reporting to internal and external stakeholders,
(3) operate its business efficiently and effectively,
(4) comply with all applicable laws and regulations, and
(5) safeguard its assets.
Most of the well-publicized failures (including not only Enron and WorldCom, but also the
governance failures that led to the 2008 financial crisis) were, at least in part, the result of weak
control environments.
The control environment includes the following elements:
• Integrity and ethical values.
• Management philosophy and operating style.
• Organizational structure.
• Assignment of authority and responsibility.
• Human resource policies and practices.
• Competence of personnel.
Central to any approach to auditing the control environment is the assessment of risks from
failure of each one of the six individual control environment elements as defined in the glossary
of the Standards. Upon determining the risks relating to each one of the six control environment
elements, the chief audit executive (CAE) may consider including in his or her annual audit plan
one or more failures can miss the fundamental aspects of the organization’s foundation..
Hello. Im currently working on the last section to my assignment a.pdf
Hello. I\'m currently working on the last section to my assignment and I\'m running into issues.
I\'ll post a screenshot of the directions provided to us, my 5 classes, and a screenshot of my
console output. Can you help me fix my code? I don\'t know where it\'s going wrong and I can\'t
figure it out. Please leave comments on what I did wrong so I can learn from it. Thank you so
much!
Here is the instructions from the pdf for reference on what I\'m trying to accomplish.
package campus;
public class Person {
private String id;
private String lastName;
private String firstName;
public Person(String id, String last, String first)
{
this.id = id;
this.lastName = last;
this.firstName = first;
}
public String getLastName() {
return lastName;
}
public void setLastName(String lastName) {
this.lastName = lastName;
}
public String getFirstName() {
return firstName;
}
public void setFirstName(String firstName) {
this.firstName = firstName;
}
public String getId() {
return id;
}
public String toString()
{
return id + \": \" + firstName + \" \" + lastName;
}
}
------
---Student.java---
package campus;
public class Student extends Person {
private String major;
private int level;
private Person obj;
public Student(String id, String last, String first, String focus, int level) {
super(id, last, first);// calling parent constructor
this.major = focus;
this.level = level;
obj = new Person(id, last, first);
}
public String getMajor() {
return major;
}
public void setMajor(String major) {
this.major = major;
}
public int getLevel() {
return level;
}
public void setLevel(int level) {
this.level = level;
}
@Override
public String toString() { // override toString() method
return \"id: \" + obj.getId() + \", Name: \" + obj.getFirstName() + \" \" + obj.getLastName()
+ \", major is \"
+ this.major + \" and their level is \" + this.level;
}
}
------
---Faculty.java---
package campus;
public class Faculty extends Person {
private String dept;
private String rank;
private Person obj;
public Faculty(String id, String last, String first, String focus, int level) {
super(id, last, first);// calling parent constructor
}
public String getDept() {
return dept;
}
public void setDept(String dept) {
this.dept = dept;
}
public String getRank() {
return rank;
}
public void setRank(int level) {
this.rank = rank;
}
@Override
public String toString() { // override toString() method
return \"id: \" + obj.getId() + \", Name: \" + obj.getFirstName() + \" \" + obj.getLastName()
+ \", deptartment is \"
+ this.dept + \" and their rank is \" + this.rank;
}
}
------
---Section.java---
package campus;
public class Section {
private String id;
private Faculty instructor;
private Student[] enrolled;
private int numofEnroll;
private int capacity;
private String location;
private String time;
private String semester;
public Section(String id, Faculty instructor, int capacity, String location, String time, String
semester) {
}
public Section(String id, int capacity) {
this.id = id;
this.capacity .
CPIIs the CPI a true measure of inflationSolutionYes, the C.pdf
CPI
Is the CPI a true measure of inflation?
Solution
Yes, the CPI adds the price changes of the basket of commodities. It calculate the changes in the
cost of bundles from one year to the next year. It includes commodities such as food, beverages,
transportation, medicare, education , communication and etc... It is the most useful statistics for
finding the changes in the inflation.
The CPI is calculated by the foloowing way.
CPI= Cost of market basket in the current year/ Cost of market basket in the base year*100..
Exercise 10-1 Identifying financial versus managerial accounting ite.pdf
Exercise 10-1 Identifying financial versus managerial accounting items LO 10-1 Required
Indicate whether each of the following items is representative of managerial or of financial
accounting: Information is factual and is characterized by objectivity, reliability, consistency,
and accuracy. Information is reported continuously and has a current or future orientation.
Information is provided to outsiders, including investors, creditors, government agencies,
analysts, and reporters. Information is regulated by the SEC, FASB, and other sources of GAAP.
Information is based on estimates that are bounded by relevance and timeliness. Information is
historically based and usually reported annually. Information is local and pertains to subunits of
the organization. Information includes economic and nonfinancial data as well as financial data.
Information is global and pertains to the company as a whole. Information is provided to
insiders, including executives, managers, and employees.
Solution
Financial accounting :- Financial Accounting aims at presenting financial health of an entity.
Managerial Accounting :- Managerial Accounting is used by managers for conducting day-to-
day operations of business.
1.Information is factual and is characterized by objectivity, reliability, consistency,and accutacy-
--financial accounting.
2.Information is reported continuously and has a current or future orientation----- Managerial
Accounting
3. Information is provided to outsiders, including investors, creditors, government agencies,
analysts, and reporters. ----Financial Accounting
4.Information is regulated by the SEC, FASB, and other sources of GAAP --- Financial
Accounting
5.Information is based on estimates that are bounded by relevance and timeliness---Managerial
Accounting
6.Information is historically based and usually reported annually. --- Financial Accounting
7. Information is local and pertains to subunits of the organization. - - - Managerial Accounting
8.Information includes economic and nonfinancial data as well as financial data.--- Managerial
Accounting
9. Information is global and pertains to the company as a whole. - - - Financial Accounting
10.Information is provided to insiders, including executives, managers, and employees. - - -
Managerial Accounting.
Both E_1 and E_2 are from problem 1. State at least one reason why b.pdf
Both E_1 and E_2 are from problem 1. State at least one reason why both E_1 and E_2 are
invertible matrices. Find both E^-1_1 and E^-1_2 and show that E^-1E_1 = I, E^-1_2 E_2=I,
where I is the 3 times 3 identity matrix.
Solution
a)since i dont have matrix, follow simple steps
calculate determiniant of matrices E1 and E2. if its zero then it is not invertible. if its non zero, it
can be inverted.
b) find out E1 and E2 inverse using cofactors.. then multiply them with E1 and E2 respectivly.
you will find out product is identity matrix..
37. In the equilibrium represented above, the species that act as aci.pdf
37. In the equilibrium represented above, the species that act as acids include which of the
following? (A) only H30 (B) HSO4 and H30 (C) HSOs and SO42 (D) H30 and SO2
Solution
HSO4- + H2O<---> H3O+ + SO42-
HSO4- gives H+ ion and forms SO42-
SO, HSO4- acts as an acid and SO42- is its conjugate base
H2O takes H+ and forms H3O+
so, H2O acts as a base and H3O+ is its conjugate acid.
So, acids are-
HSO4- and H3O+.
Add Two ArraysWrite a MIPS assembly language program that adds tw.pdf
Add Two Arrays:
Write a MIPS assembly language program that adds two arrays with ten elements (element-by-
element addition) andsave them in an array. Print the sum. Please someone who can actually do
it and not copy and paste it from another site.
Solution
Ans.
DATA SEGMENT
NUM1 2,3,1,7.6,9,0,5,4,2
NUM2 0,9,6,3,8,1,8,9,6,1
RESULT
ENDS
START:
MOV AX,DATA
MOV DS,AX
LEA SI,NUM1
LEA DI,NUM2
LEA BX,RESULT
MOV CX,10
LOOP1:
MOV AL,[SI]
ADD AL,[DI]
MOV [BX],AL
INC BX
INC SI
INC DI
LOOP LOOP1.
A class of 50 music students includes 13 who play the piano, 14 who p.pdf
A class of 50 music students includes 13 who play the piano, 14 who play the guitar, and 8 who
play both the piano and the guitar. How many students in the class play neither instrument? ___
Solution
n(A U B) = n(A) + n(B) - n(A B)
so students who play ateast one instrument is:
n(A U B)=13+14-8
n(A U B)=19
so students who donot play any instrument is:50-19=31.
A poor country wants to increase exports to developed countries. Outl.pdf
A poor country wants to increase exports to developed countries. Outline 3 what they must do in
order to succeed at this
Solution
Basically trade balance is consits of Export- Import. if any poor country wants to increase its
export then it must go for devaluation of her domestic currency. Since, devaluation of any
currency reduces the import on the one hand and it also increses the exports of devalued currency
nation on the other hand..
Operation Blue Star - Saka Neela Tara
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
More Related Content
More from irshadkumar3
The functions f_1, f_2, ..., f_m defined on the interval I are said t.pdf
The functions f_1, f_2, ..., f_m defined on the interval I are said to be linearly dependent on I if
at least one of them can be expressed as a linear combination of the others on I. Equivalently,
they are linearly dependent on I if there exist constants c_1, c_2, ..., c_m, not all zero, such that
c_1 f_1 (x) + c_2 f_2 (x) + middot middot middot + c_m f_m (x) = 0 for all x I. Otherwise, they
are said to be linearly independent on I. Show that the functions f_1 (x) = e^x f_2 (x) = e^-2x
f_3 (x) = 3e^x - 2e^-2x are linearly dependent on (-infinity, infinity).
Solution
Given that
f1(x) = ex , f2(x) = e-2x and f3(x) = 3ex - 2e-2x
Then there exists non-zero constants C1 = - 3 , C2 = 2 and C3 = 1 such that C1f1(x) + C2 f2(x) +
C1f3(x) = 0.
Hence The functions f1( x) = ex , f2(x) = e-2x and f3(x) = 3ex - 2e-2x are linearly dependent for
all x *( - , ).
Silica gel is slightly acidic. Will this cause an acidic compound to.pdf
Silica gel is slightly acidic. Will this cause an acidic compound to run faster or slower in a given
mobile phase vs a similar basic compound? Why?
Solution
SiO2 is an acidic compound.when SiO2 in water gives acid H2SiO3.
In acidic or basic condition, mainly depends upon polarity. Polar compounds easily hydrogen
bonding with silica gel and make highly mobile phase polar.
Polar.compounds bind with silica gel easily whereas nonpolar compounds easily will come in the
column chromatography..
Rank the four substances from least to most polar, Ethanol, pentanol.pdf
Rank the four substances from least to most polar, Ethanol, pentanol, kerosene, and water?
Solution
H2O is most polar .
Alcohols are polar .But in alcohols carbon atoms are increases polar nature is decreases.
Kerosene is non polar .It is least polar .
Kerosene>pentanol> ethanol > water >>>>answer.
Compare and contrast the main approaches for developing a WBS. Which.pdf
Compare and contrast the main approaches for developing a WBS. Which approach do you feel
is most user-friendly? Explain your answer.
Solution
The main approaches for WBS development are as follows:
1. Deliverable based approach:
The project team works as per the functional components of the products. Here the process are
compiled and accomplished as per the elements that constitutes the complete project.
2. Task Based:
The tasks to create the project deliverable are first identified and are prioritized. This is also
known as verb based method.
3. Time based:
The projects are divided as per the completing and delivery time so that the projects that are to be
delivered first can be worked upon by the team.
4. Cost based.
The project is defined in terms of cost.
The following methods are used for developing a WBS:
1. Top-Down Approach:
The steps involved in the top-down process are as follows:
This approach is appropriate when the project members are greenhorn to WBS development and
the project\'s nature is complex and ambiguous.
2. Bottom-Up Approach:
The steps involved in the bottom-up process are as follows:
This method is applicable when the nature of the project, project scope, and life cycle is clear.
Bottom-up method is more user friendly as the appropriate templates and organizational
standards are available..
PROBLEM 4 Run runTerribleLoop for one hour. You can stop the prog.pdf
* PROBLEM 4: Run runTerribleLoop for one hour. You can stop the program using the red
\"stop\" square in eclipse. Fill in the OUTPUT line below with the
numbers you saw LAST --- edit the line, replacing the two ... with what you saw:
*
* OUTPUT: terribleFibonacci(...)=... // TODO
*
* Comment: the code uses \"long\" variables, which are like \"int\", but
* bigger. It\'s because fibonacci numbers get really big really fast.
*/
public static void runTerribleLoop () {
for (int N = 0; N < 100; N++)
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", N, terribleFibonacci (N));
}
public static void runTerribleSomeValues () {
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 13, terribleFibonacci (13));
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 7, terribleFibonacci (7));
StdOut.format (\"terribleFibonacci(%2d)=%d\ \", 21, terribleFibonacci (21));
}
public static long terribleFibonacci (int n) {
if (n <= 1) return n;
return terribleFibonacci (n - 1) + terribleFibonacci (n - 2);
}
Solution
I think you are looking for Fibonacci program, as you have mentioned it as
TODO in the question.
Please find the Fibonacci program as below.
public static long terribleFibonacci(long n){
// declare 2 numbers to hold the results.
// n1 and n2 hold initial values i.e. 0 and 1.
long n1=0;
long n2=1;
long n3;
for(int i=2;i.
please help! READ th.pdf
***please help! READ the grading criteria***
HW5: Weekly Timesheet CSS 161 Fundamentals of Computing By: Hansel Ong Summary In
HW3, you created a program that allows the user to enter time worked on a week-by-week basis
Such a system calculated any hours worked over 40 hours a week as overtime. However, this
means that an employee could work 12 or 20 hours once a week, 4 hours the rest of the week,
and not be paid overtime at all. Let\'s fix this problem in this homework. For simplification, let\'s
limit the number of weeks the user can enter to two weeks maximum. Note also that any hours
worked in a day beyond 8 hours should be regarded as overtime hours. Estimated Work Needed
This assignment took me about 30-45 minutes to write (not including challenges, but including
testing, commenting, and cleanup) in less than 200 lines of code In other words, you should
expect to spend between 135 to 450 minutes working on this assignment. If you\'ve spent more
than 7.5 hours working on this assignment, then you are likely struggling with loops and/or
arrays and should re-read the lecture slides and attempt the exercises within seek help from your
fellow classmates, myself, your lab instructor, QSC tutor as well as online resources. Skills
Expected All the skills from previous Assignment(s) Arrays File I/O Assignment Description
Write a program that does the following Provide the following \"main menu\" to the user (Create
a method for each of the choices): o (1 point) Enter/Edit Timesheet o (1 point) Display
Timesheet o (1 point) Print Paystub (End Program) o (1 point) Keep presenting this menu to the
user until user asks to print a paystub For \"Enter/Edit Timesheet\" o (1 point) Ask the user
which week the user would like to edit (1 or 2) (1 point) Return to \"main menu\" if user chooses
anything other than 1 or 2 o (2 points) Display each day of the week (M, Tu, W and the number
of hours worked for each day (display 0 by default until user has entered a value) (2 point) Allow
the user to edit hours for specific days of the week (1 point) Return to \"main menu\" if user
enters an invalid day of the week or invalid hours of the day
Solution
// Paystub.java
import java.util.Scanner;
public class Paystub
{
static int insuranceDeduction = 25;
static int regularHours1 = 0;
static int overtimeHours1 = 0;
static int regularHours2 = 0;
static int overtimeHours2 = 0;
static int[] week1 = new int[7];
static int[] week2 = new int[7];
public static int mainMenu()
{
System.out.println(\"\ \ --------------Main Menu----------------\");
System.out.print(\"1. Enter/Edit Timesheet\ 2. Display Timesheet\ 3. Print Paystub (End
program)\ Please choose from the above options: \");
Scanner keyboard = new Scanner (System.in);
int choice = keyboard.nextInt();
return choice;
}
public static void inputHours()
{
Scanner keyboard = new Scanner (System.in);
System.out.print(\"Which week Would you like to enter/edit(1 or 2): \");
int week = keyboard.nextInt();
if(week == 1)
{
for.
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of.pdf
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of output that included
“Happiness.” In class we also saw that former Senator Robert F. Kennedy criticized GDP for its
inability to take into account the quality of life of a nation’s citizens. In 2013, President Obama
has appointed you to look into developing a new measure of the nation’s overall economic well-
being called the Gross Domestic Happiness Indicator (GDHI). What would you include in this
new measure and how will you incorporate existing measures of GDP into the GDHI?
Solution
Ans
I will include Gdp per capita, measures of social support, life expectancy at birth, corruption and
nepotism, freedom to choose,pollution, public goods, environmental goods in thus measure. Gdp
per capita is the existing measure that I will utilize..
Identify and explain, in order of occurrence, the four primary phase.pdf
Identify and explain, in order of occurrence, the four primary phases to an IT
auditPhaseExplanation1.2.3.4.
Solution
1.planning : in planning phase auditor must gain sufficient knowledge on companyes business
and financial reporting system
2. Tests of control : these are audit procedure designed to evaluate operating effectiveness of
control system
3. Substantive tests: these are examination of financial statements with underlying supporting
documents and ensuring accuracy and correctness of posting
4. Audit reporting : it is an opinion of auditor on financial statements that is weather they are all
prepared in all material respects and discloses any defects
he may issue either qualified ( adverse) / unqualified ( good) based on the information obtained
in audit
thank you.
IA 31 The reweycir deseers.ostains 4phaws G1,2, s, and M panes .pdf
IA 31 The reweycir deseers.ostains 4phaws: G1,2, s, and M panes: An aticb plae DNA is
dupwcase f: ah---X c) In which gkesacus the final divinion: 26 Mitosis Meiosis many DNA
duplicatson esamber of daughter cells ordpEoids Aery cells are genetically identical or dissimilar
C
Solution
Ans 1 a consecutive order of cell cycle phases is G1 , S , G2 and M
B. DNA duplicates in S phase (synthesis phase)
C. The final division of cells occurs in M phase
D. The four phases of mitosis are prophase, metaphase, anaphase and telophase.
I am getting an errormsg 911, Level 16, State 1, Line 12 Database.pdf
I am getting an error:
msg 911, Level 16, State 1, Line 12 Database \'MyWebDB\' does not exist. Make sure that the
name is entered correctly.
This is my homework I am needing to implement this into a create table MyWebDB and I have
the error, what have I done incorrectly?
--Write a script that implements the following design in a database named MyWebDB: --In the
Downloads table, the UserID and ProductID columns are the foreign keys. --Include a statement
to drop the database if it already exists. --Include statements to create and select the database. --
Include any indexes that you think are necessary.
DROP DATABASE MyWebDB;
CREATE Database MyWebDB;
USE MyWebDB
Create table users (
UserID int,
EmaiAddress varchar(255),
FirstName varchar(255),
LastName varchar(255),
Constraint pk_UserIDPRIMARYKEY (UserID)
);
Create table Products (
ProductsID int,
ProductName varchar(255),
Constraint pk_ProductsIDPRIMARYKEY (ProductsID)
);
Create table Downloads (
DownloadID int,
DownloadDate Date,
FileName varchar(255),
ProductsID int,
UserID int,
Constraint fk_ProDownloadFOREIGNKEY (ProductsID)
References Products (ProductsID),
Constraint fk_UsersDownloadFOREIGNKEY (UserID)
References Users (UserID)
);
Solution
I ran the same queries on my machine it is working fine..
Script which will implement the above design :
MyWebDB::
USE [master]
GO
/****** Object: Database [MyWebDB] Script Date: 22-11-2016 15:41:32 ******/
CREATE DATABASE [MyWebDB]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N\'MyWebDB\', FILENAME = N\'c:\\Program Files\\Microsoft SQL
Server\\MSSQL11.SQL2012\\MSSQL\\DATA\\MyWebDB.mdf\' , SIZE = 4160KB , MAXSIZE
= UNLIMITED, FILEGROWTH = 1024KB )
LOG ON
( NAME = N\'MyWebDB_log\', FILENAME = N\'c:\\Program Files\\Microsoft SQL
Server\\MSSQL11.SQL2012\\MSSQL\\DATA\\MyWebDB_log.ldf\' , SIZE = 1040KB ,
MAXSIZE = 2048GB , FILEGROWTH = 10%)
GO
ALTER DATABASE [MyWebDB] SET COMPATIBILITY_LEVEL = 110
GO
IF (1 = FULLTEXTSERVICEPROPERTY(\'IsFullTextInstalled\'))
begin
EXEC [MyWebDB].[dbo].[sp_fulltext_database] @action = \'enable\'
end
GO
ALTER DATABASE [MyWebDB] SET ANSI_NULL_DEFAULT OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_NULLS OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_PADDING OFF
GO
ALTER DATABASE [MyWebDB] SET ANSI_WARNINGS OFF
GO
ALTER DATABASE [MyWebDB] SET ARITHABORT OFF
GO
ALTER DATABASE [MyWebDB] SET AUTO_CLOSE ON
GO
ALTER DATABASE [MyWebDB] SET AUTO_CREATE_STATISTICS ON
GO
ALTER DATABASE [MyWebDB] SET AUTO_SHRINK OFF
GO
ALTER DATABASE [MyWebDB] SET AUTO_UPDATE_STATISTICS ON
GO
ALTER DATABASE [MyWebDB] SET CURSOR_CLOSE_ON_COMMIT OFF
GO
ALTER DATABASE [MyWebDB] SET CURSOR_DEFAULT GLOBAL
GO
ALTER DATABASE [MyWebDB] SET CONCAT_NULL_YIELDS_NULL OFF
GO
ALTER DATABASE [MyWebDB] SET NUMERIC_ROUNDABORT OFF
GO
ALTER DATABASE [MyWebDB] SET QUOTED_IDENTIFIER OFF
GO
ALTER DATABASE [MyWebDB] SET RECURSIVE_TRIGGERS OFF
GO
ALTER DATABASE [MyWebDB] SET ENABLE_BROKER
GO
ALTER DATABASE [MyWebDB] SET AUTO_UPDATE_STATISTICS_ASYNC OFF
GO
ALTER DATABASE [MyWebDB] SET DATE_CORREL.
How do you do the last page. How do you make the picture with the t.pdf
How do you do the last page?. How do you make the picture with the trail. I\'ve coded
everything but that need help with how to change the numbers in the matrix to produce the
correct trail. Coded in C please. How
Do u code the function ask of on the last page? CS 100 Project Six-Fall 2016 Project Ovenicy:
The world is not flat, despite what the Flat Earth Society hupsLAww:a.theflatearthsociety.org)
says. There are lots of hills and valleys out there. Given this, mankind has spent considerable
time and effort measuring the exactelevation above sea level for each on the earth You can view
these elevation maps as a two- dimensional grid. A sample elevation shown below: 100 110 120
105 115 100 105 115 110 100 105 115 95 120 120 98 95 110 125 130 135 100 110 120 130 135
145 Obviously, elevations get higher in the mountains, and approach zero as you near the ocean.
This program reads a set of elevation data and: 1. Generates a simple image from this clevation
data, a black-and-white image where higher clevations have a darker shade than lower
elevations. 2. Identifies a path across this grid. The path can be North-to-South, South-to-North,
East-to-West, or West- to East. To find this path, you vant to minimize your clevation gain
(climb). In other words, you don\'t want to walk uphill any more than necessary. Instead, you
want to go as much as possible, a steep downhill path is viewed as optimal. You will generate a
second image file with the recommended trail. To generate a black-and-white (grayscale) picture
of this elevation data, we will use a graphics format that uses ASCII (text files. Most graphics
programs use binary files (gif,jpeg, etc) which promote smaller fle sizes. Since this is just CS
100, well stick with ASCII (text) files, even though they take more space. The ASCII format we
use is called pgm, and is shown P2 at the right. The first line is always P2. After that, you width
inpix have three values (width, height, grayscale levels that pixels value (always 2SS for this
project) maximum grayscale can be on a single line or separate lines. Finally, you pixel-11-
intensity pixel-1-2-intensity pixel-1-3-intensity have the actual pixel values for each pixel in the
image. pixel-2-1-intensity pixel2-2-intensity pixel-2-3-intensity A pixel with a value of 0 is black
(absence of light and a pixel with a value of 255 is white (all light pielN-1 intensity pixelN-2-
intensity pixel-N-3intensity This project involves taking a set of elevations and making a
grayscale image from these elevations, and then drawing a second image that includes a trail
across the grid. You are crcating two PEm images. Both of these images will use 255 as the
maximum grayscale value (values range from 0-255) The first image is simply a map of the
clevations. So that we can mark a visible trail on this map part two), we will map all the
clevations in our input file to a value in the range of 55255. By doing this, placing a trail of color
0 (black) is easily visible o.
How do auditors gain an understanding of the internal controls in an.pdf
How do auditors gain an understanding of the internal controls in an IT environment?
Solution
The control environment is the foundation on which an effective system of internal control is
built and operated in an organization that strives to
(1) achieve its strategic objectives,
(2) provide reliable financial reporting to internal and external stakeholders,
(3) operate its business efficiently and effectively,
(4) comply with all applicable laws and regulations, and
(5) safeguard its assets.
Most of the well-publicized failures (including not only Enron and WorldCom, but also the
governance failures that led to the 2008 financial crisis) were, at least in part, the result of weak
control environments.
The control environment includes the following elements:
• Integrity and ethical values.
• Management philosophy and operating style.
• Organizational structure.
• Assignment of authority and responsibility.
• Human resource policies and practices.
• Competence of personnel.
Central to any approach to auditing the control environment is the assessment of risks from
failure of each one of the six individual control environment elements as defined in the glossary
of the Standards. Upon determining the risks relating to each one of the six control environment
elements, the chief audit executive (CAE) may consider including in his or her annual audit plan
one or more failures can miss the fundamental aspects of the organization’s foundation..
Hello. Im currently working on the last section to my assignment a.pdf
Hello. I\'m currently working on the last section to my assignment and I\'m running into issues.
I\'ll post a screenshot of the directions provided to us, my 5 classes, and a screenshot of my
console output. Can you help me fix my code? I don\'t know where it\'s going wrong and I can\'t
figure it out. Please leave comments on what I did wrong so I can learn from it. Thank you so
much!
Here is the instructions from the pdf for reference on what I\'m trying to accomplish.
package campus;
public class Person {
private String id;
private String lastName;
private String firstName;
public Person(String id, String last, String first)
{
this.id = id;
this.lastName = last;
this.firstName = first;
}
public String getLastName() {
return lastName;
}
public void setLastName(String lastName) {
this.lastName = lastName;
}
public String getFirstName() {
return firstName;
}
public void setFirstName(String firstName) {
this.firstName = firstName;
}
public String getId() {
return id;
}
public String toString()
{
return id + \": \" + firstName + \" \" + lastName;
}
}
------
---Student.java---
package campus;
public class Student extends Person {
private String major;
private int level;
private Person obj;
public Student(String id, String last, String first, String focus, int level) {
super(id, last, first);// calling parent constructor
this.major = focus;
this.level = level;
obj = new Person(id, last, first);
}
public String getMajor() {
return major;
}
public void setMajor(String major) {
this.major = major;
}
public int getLevel() {
return level;
}
public void setLevel(int level) {
this.level = level;
}
@Override
public String toString() { // override toString() method
return \"id: \" + obj.getId() + \", Name: \" + obj.getFirstName() + \" \" + obj.getLastName()
+ \", major is \"
+ this.major + \" and their level is \" + this.level;
}
}
------
---Faculty.java---
package campus;
public class Faculty extends Person {
private String dept;
private String rank;
private Person obj;
public Faculty(String id, String last, String first, String focus, int level) {
super(id, last, first);// calling parent constructor
}
public String getDept() {
return dept;
}
public void setDept(String dept) {
this.dept = dept;
}
public String getRank() {
return rank;
}
public void setRank(int level) {
this.rank = rank;
}
@Override
public String toString() { // override toString() method
return \"id: \" + obj.getId() + \", Name: \" + obj.getFirstName() + \" \" + obj.getLastName()
+ \", deptartment is \"
+ this.dept + \" and their rank is \" + this.rank;
}
}
------
---Section.java---
package campus;
public class Section {
private String id;
private Faculty instructor;
private Student[] enrolled;
private int numofEnroll;
private int capacity;
private String location;
private String time;
private String semester;
public Section(String id, Faculty instructor, int capacity, String location, String time, String
semester) {
}
public Section(String id, int capacity) {
this.id = id;
this.capacity .
CPIIs the CPI a true measure of inflationSolutionYes, the C.pdf
CPI
Is the CPI a true measure of inflation?
Solution
Yes, the CPI adds the price changes of the basket of commodities. It calculate the changes in the
cost of bundles from one year to the next year. It includes commodities such as food, beverages,
transportation, medicare, education , communication and etc... It is the most useful statistics for
finding the changes in the inflation.
The CPI is calculated by the foloowing way.
CPI= Cost of market basket in the current year/ Cost of market basket in the base year*100..
Exercise 10-1 Identifying financial versus managerial accounting ite.pdf
Exercise 10-1 Identifying financial versus managerial accounting items LO 10-1 Required
Indicate whether each of the following items is representative of managerial or of financial
accounting: Information is factual and is characterized by objectivity, reliability, consistency,
and accuracy. Information is reported continuously and has a current or future orientation.
Information is provided to outsiders, including investors, creditors, government agencies,
analysts, and reporters. Information is regulated by the SEC, FASB, and other sources of GAAP.
Information is based on estimates that are bounded by relevance and timeliness. Information is
historically based and usually reported annually. Information is local and pertains to subunits of
the organization. Information includes economic and nonfinancial data as well as financial data.
Information is global and pertains to the company as a whole. Information is provided to
insiders, including executives, managers, and employees.
Solution
Financial accounting :- Financial Accounting aims at presenting financial health of an entity.
Managerial Accounting :- Managerial Accounting is used by managers for conducting day-to-
day operations of business.
1.Information is factual and is characterized by objectivity, reliability, consistency,and accutacy-
--financial accounting.
2.Information is reported continuously and has a current or future orientation----- Managerial
Accounting
3. Information is provided to outsiders, including investors, creditors, government agencies,
analysts, and reporters. ----Financial Accounting
4.Information is regulated by the SEC, FASB, and other sources of GAAP --- Financial
Accounting
5.Information is based on estimates that are bounded by relevance and timeliness---Managerial
Accounting
6.Information is historically based and usually reported annually. --- Financial Accounting
7. Information is local and pertains to subunits of the organization. - - - Managerial Accounting
8.Information includes economic and nonfinancial data as well as financial data.--- Managerial
Accounting
9. Information is global and pertains to the company as a whole. - - - Financial Accounting
10.Information is provided to insiders, including executives, managers, and employees. - - -
Managerial Accounting.
Both E_1 and E_2 are from problem 1. State at least one reason why b.pdf
Both E_1 and E_2 are from problem 1. State at least one reason why both E_1 and E_2 are
invertible matrices. Find both E^-1_1 and E^-1_2 and show that E^-1E_1 = I, E^-1_2 E_2=I,
where I is the 3 times 3 identity matrix.
Solution
a)since i dont have matrix, follow simple steps
calculate determiniant of matrices E1 and E2. if its zero then it is not invertible. if its non zero, it
can be inverted.
b) find out E1 and E2 inverse using cofactors.. then multiply them with E1 and E2 respectivly.
you will find out product is identity matrix..
37. In the equilibrium represented above, the species that act as aci.pdf
37. In the equilibrium represented above, the species that act as acids include which of the
following? (A) only H30 (B) HSO4 and H30 (C) HSOs and SO42 (D) H30 and SO2
Solution
HSO4- + H2O<---> H3O+ + SO42-
HSO4- gives H+ ion and forms SO42-
SO, HSO4- acts as an acid and SO42- is its conjugate base
H2O takes H+ and forms H3O+
so, H2O acts as a base and H3O+ is its conjugate acid.
So, acids are-
HSO4- and H3O+.
Add Two ArraysWrite a MIPS assembly language program that adds tw.pdf
Add Two Arrays:
Write a MIPS assembly language program that adds two arrays with ten elements (element-by-
element addition) andsave them in an array. Print the sum. Please someone who can actually do
it and not copy and paste it from another site.
Solution
Ans.
DATA SEGMENT
NUM1 2,3,1,7.6,9,0,5,4,2
NUM2 0,9,6,3,8,1,8,9,6,1
RESULT
ENDS
START:
MOV AX,DATA
MOV DS,AX
LEA SI,NUM1
LEA DI,NUM2
LEA BX,RESULT
MOV CX,10
LOOP1:
MOV AL,[SI]
ADD AL,[DI]
MOV [BX],AL
INC BX
INC SI
INC DI
LOOP LOOP1.
A class of 50 music students includes 13 who play the piano, 14 who p.pdf
A class of 50 music students includes 13 who play the piano, 14 who play the guitar, and 8 who
play both the piano and the guitar. How many students in the class play neither instrument? ___
Solution
n(A U B) = n(A) + n(B) - n(A B)
so students who play ateast one instrument is:
n(A U B)=13+14-8
n(A U B)=19
so students who donot play any instrument is:50-19=31.
A poor country wants to increase exports to developed countries. Outl.pdf
A poor country wants to increase exports to developed countries. Outline 3 what they must do in
order to succeed at this
Solution
Basically trade balance is consits of Export- Import. if any poor country wants to increase its
export then it must go for devaluation of her domestic currency. Since, devaluation of any
currency reduces the import on the one hand and it also increses the exports of devalued currency
nation on the other hand..
More from irshadkumar3 (20)
The functions f_1, f_2, ..., f_m defined on the interval I are said t.pdf
The functions f_1, f_2, ..., f_m defined on the interval I are said t.pdf
Silica gel is slightly acidic. Will this cause an acidic compound to.pdf
Silica gel is slightly acidic. Will this cause an acidic compound to.pdf
Rank the four substances from least to most polar, Ethanol, pentanol.pdf
Rank the four substances from least to most polar, Ethanol, pentanol.pdf
Compare and contrast the main approaches for developing a WBS. Which.pdf
Compare and contrast the main approaches for developing a WBS. Which.pdf
PROBLEM 4 Run runTerribleLoop for one hour. You can stop the prog.pdf
PROBLEM 4 Run runTerribleLoop for one hour. You can stop the prog.pdf
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of.pdf
In 1972 the small kingdom of Bhutan, in Asia, developed a measure of.pdf
Identify and explain, in order of occurrence, the four primary phase.pdf
Identify and explain, in order of occurrence, the four primary phase.pdf
IA 31 The reweycir deseers.ostains 4phaws G1,2, s, and M panes .pdf
IA 31 The reweycir deseers.ostains 4phaws G1,2, s, and M panes .pdf
I am getting an errormsg 911, Level 16, State 1, Line 12 Database.pdf
I am getting an errormsg 911, Level 16, State 1, Line 12 Database.pdf
How do you do the last page. How do you make the picture with the t.pdf
How do you do the last page. How do you make the picture with the t.pdf
How do auditors gain an understanding of the internal controls in an.pdf
How do auditors gain an understanding of the internal controls in an.pdf
Hello. Im currently working on the last section to my assignment a.pdf
Hello. Im currently working on the last section to my assignment a.pdf
CPIIs the CPI a true measure of inflationSolutionYes, the C.pdf
CPIIs the CPI a true measure of inflationSolutionYes, the C.pdf
Exercise 10-1 Identifying financial versus managerial accounting ite.pdf
Exercise 10-1 Identifying financial versus managerial accounting ite.pdf
Both E_1 and E_2 are from problem 1. State at least one reason why b.pdf
Both E_1 and E_2 are from problem 1. State at least one reason why b.pdf
37. In the equilibrium represented above, the species that act as aci.pdf
37. In the equilibrium represented above, the species that act as aci.pdf
Add Two ArraysWrite a MIPS assembly language program that adds tw.pdf
Add Two ArraysWrite a MIPS assembly language program that adds tw.pdf
A class of 50 music students includes 13 who play the piano, 14 who p.pdf
A class of 50 music students includes 13 who play the piano, 14 who p.pdf
A poor country wants to increase exports to developed countries. Outl.pdf
A poor country wants to increase exports to developed countries. Outl.pdf
Recently uploaded
Operation Blue Star - Saka Neela Tara
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
How libraries can support authors with open access requirements for UKRI fund...
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
How to Break the cycle of negative Thoughts
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
Cambridge International AS A Level Biology Coursebook - EBook (MaryFosbery J...
for studentd in cabridge board
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...Nguyen Thanh Tu Collection
https://app.box.com/s/4hfk1xwgxnova7f4dm37birdzflj806wThe geography of Taylor Swift - some ideas
Geographical themes connected with Taylor Swift's ERAS tour - coming to the UK in June 2024
Polish students' mobility in the Czech Republic
Polish students mobility to the Czech Republic within eTwinning project "Medieval adventures with Marco Polo"
The Challenger.pdf DNHS Official Publication
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
How to Split Bills in the Odoo 17 POS Module
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
How to Create Map Views in the Odoo 17 ERP
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is prepared for master's students (MIFB & MIBS) UUM. May it be useful to all.Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Recently uploaded (20)
How libraries can support authors with open access requirements for UKRI fund...
How libraries can support authors with open access requirements for UKRI fund...
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Cambridge International AS A Level Biology Coursebook - EBook (MaryFosbery J...
Cambridge International AS A Level Biology Coursebook - EBook (MaryFosbery J...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptx
Which of these worms are segmentedA.annelidsB.planariansC.rou.pdf
- 1. Which of these worms are segmented? A.annelids B.planarians C.roundworms D.flukes E.All worms are segmented Solution Choice A iscorrect. Reason: Phylum annelida represents worms with segmented body. They also have radial symmetry and small segments can be found on their body. These segments are true segments in nature which means that external segment corresponds to internal segmentation. Further, the ventral parts of these segments also contain pseudopodia in some annelids. Thus, annelids represent true segmented bodies such as in earthworm.