Nowadays, most of the cars are coming equipped with an automatic transmission, however, there are still cars out there who have a manual transmission. The basic functioning of the manual and automatic transmission is a bit different. There are lots of component in manual transmission. If you are an owner of a manual transmission car, then it is imperative that you must learn about these various components. Go through the slide to know the different types of manual transmission components in a car.

1. What are the Different
Types of Manual
Transmission
Components in Car

2. The manual
transmission of the car
can force the drivers to
make more effort for
shifting the gear stick
manually.

3. The manual
transmission cars have a
stick shifter which is
mounted in the central
console area vertically
to move it easily.

4. The clutch disc is placed
in between the internal
combustion engine and
transmission with a
clutch pedal at the left
of the brake pedal.

5. It has a manual
gearbox of 5 gears of
different sizes. So, you
need to switch the
gears properly while
driving.

6. The following points
define the different
types of components
used in manual
transmission cars.

7. Clutch disc &
pedal
Clutch Disc
& Pedal

8. The clutch disc assists in
transferring the torque
from the engine to the
manual transmission
and controlled by the
driver.

9. Thus, the clutch pedal
is a separate gear which
is controlled by the
hydraulics and allow the
clutch to disengage the
clutch pedal.

10. Clutch disc &
pedal
Gears

11. The transmission
system has gears of
different sizes means
the big gears have lots
of teeth and small gears
have fewer teeth.

12. The big gears have extra
torque to slow down
the speed of the car
and small gears allow
the car to travel faster.

13. Synchronizers
Synchronizers

14. The synchronizers are
generally used for
stimulating the
engagement between
the collar and gear for
increasing its speed.

15. Sometimes, you will
notice the speed could
end up being different.
So, you need a
synchronizer for
preventing it.

16. Synchronizers
Stick Shift

17. The stick shift in the
manual transmission
system of the car is
generally controlled by
the driver with their
hand.

18. It is generally defined as
a vertical stick that can
protrude out the center
console and connected
to the gearbox for
switching the gears.

19. Clutch disc &
pedal
Flywheel &
collar

20. The flywheel is the
circular component of
the transmission system
that sends the torque
from the engine to the
clutch disc.

21. When you will select
the gears, the collar
locks the selected gears
and allow the torque to
precede the output
shaft.

22. Conclusion

23. When you will drive the
manual transmission
car, you need to learn
the best way to engage
and disengage the
clutch.

24. Thus, the manual
transmission cars give
you better gas mileage
and proper care can last
them a long way.

25. https://escondidogermanauto.com/