This document provides an overview of a company's business model and organization. It discusses the company's operations in energy generation including combined-cycle co-generation power plants. It also outlines the company's corporate social responsibility initiatives and performance management systems. Finally, it provides details on the company's leadership structure and the background of its CEO.
This document provides an overview of a company's business model and organization. It discusses the company's operations in energy generation including combined-cycle co-generation power plants. It also outlines the company's corporate social responsibility initiatives and performance management systems. Finally, it provides details on the company's leadership structure and the background of its CEO.
The weekly report summarizes the progress of a student group working on an engineering project. The group designed a product using an LM3914 integrated circuit to drive 10 LEDs in a linear display. In the coming week, the group will build the circuit. The circuit allows external selection of bar or dot display modes and can drive LEDs, LCDs, or vacuum fluorescents. It has a programmable output current and internal voltage reference.
1) An engineering student group is working on a project to indicate temperature levels using LED lights, which require converting alternating current to direct current.
2) They chose to use an LNK306 integrated circuit to convert 220V AC to a 12V DC output for driving the LEDs.
3) The LNK306 provides a more constant current than a voltage regulator but cannot vary the output current level. The group plans to purchase equipment to build the circuit next week.
This weekly report summarizes the progress of a student group working on designing a water heater. The group determined they would add a function to save energy by researching water pressure. There are two pressure switches that could be used - a pressure switch that activates at a set pressure value and a flow switch that activates based on water flow rate. The group analyzed that a flow switch may be better suited for their water heater design since it can still function at low pressure from a faucet. Next week, the group will research a "memory function" to track daily water usage.
The document describes a new shower head product called the Beat Shower that contains several advanced features including an LCD screen, digital air bubble jets, pause functionality, a filter that removes 90% of impurities, and an ELB checker. It can be controlled via an LCD screen and contains 32 to 48 different digital air bubble jet patterns for a luxury showering experience.
This document discusses the concept of self-dependency and relief when facing unfamiliar situations. It suggests that when facing unfamiliar situations, one may feel a need for assistance or relief from the situation. Developing self-dependency can help one feel less need for assistance or relief from others.
This weekly report summarizes the progress of an engineering student group working on an industrial design project. The student searched technologies related to data connection, memory and transfer as directed by the industrial design students. Specifically, this week the student researched data transfer and how services like Dropbox and iCloud allow users to upload files to remote servers and share them with others. The report describes the work processes of these services and analyzes their strong points like easy sharing without physical storage devices, and weak points like monthly data limits and storage capacity restrictions. Next week, the student will search for technological machines related to data transfer as well as continue other topics.
This document discusses a transfer of funds from account 26 to account 2555 in the amount of 4 units. It outlines 4 steps for the transfer, including identifying the accounts and amount, authorizing the transfer, processing the transfer, and providing confirmation of the completed transfer.
The report summarizes the weekly progress of an engineering team working on a multi-disciplinary project. The industrial design students' eating concept was criticized by teachers for being too self-focused. As a result, the engineering students were tasked with developing a multi-touch viimote whiteboard for presenting concepts. The whiteboard would use infrared and Bluetooth to transfer data between a computer and the writing screen. Next week, the engineering team will present the multi-touch whiteboard to the industrial design students for feedback.
This document appears to contain numbers and codes that provide information about physical attributes across different interior spaces. The numbers likely reference measurements or identifiers for 5 different areas/items.
This document appears to contain numbers and codes that provide information about physical attributes across different interior spaces. The numbers likely reference measurements or counts of objects that occur in 3-4 unspecified areas, with additional codes possibly differentiating between these spaces or elements within them.
The weekly report summarizes the progress of a student group working on an engineering project. The group designed a product using an LM3914 integrated circuit to drive 10 LEDs in a linear display. In the coming week, the group will build the circuit. The circuit allows external selection of bar or dot display modes and can drive LEDs, LCDs, or vacuum fluorescents. It has a programmable output current and internal voltage reference.
1) An engineering student group is working on a project to indicate temperature levels using LED lights, which require converting alternating current to direct current.
2) They chose to use an LNK306 integrated circuit to convert 220V AC to a 12V DC output for driving the LEDs.
3) The LNK306 provides a more constant current than a voltage regulator but cannot vary the output current level. The group plans to purchase equipment to build the circuit next week.
This weekly report summarizes the progress of a student group working on designing a water heater. The group determined they would add a function to save energy by researching water pressure. There are two pressure switches that could be used - a pressure switch that activates at a set pressure value and a flow switch that activates based on water flow rate. The group analyzed that a flow switch may be better suited for their water heater design since it can still function at low pressure from a faucet. Next week, the group will research a "memory function" to track daily water usage.
The document describes a new shower head product called the Beat Shower that contains several advanced features including an LCD screen, digital air bubble jets, pause functionality, a filter that removes 90% of impurities, and an ELB checker. It can be controlled via an LCD screen and contains 32 to 48 different digital air bubble jet patterns for a luxury showering experience.
This document discusses the concept of self-dependency and relief when facing unfamiliar situations. It suggests that when facing unfamiliar situations, one may feel a need for assistance or relief from the situation. Developing self-dependency can help one feel less need for assistance or relief from others.
This weekly report summarizes the progress of an engineering student group working on an industrial design project. The student searched technologies related to data connection, memory and transfer as directed by the industrial design students. Specifically, this week the student researched data transfer and how services like Dropbox and iCloud allow users to upload files to remote servers and share them with others. The report describes the work processes of these services and analyzes their strong points like easy sharing without physical storage devices, and weak points like monthly data limits and storage capacity restrictions. Next week, the student will search for technological machines related to data transfer as well as continue other topics.
This document discusses a transfer of funds from account 26 to account 2555 in the amount of 4 units. It outlines 4 steps for the transfer, including identifying the accounts and amount, authorizing the transfer, processing the transfer, and providing confirmation of the completed transfer.
The report summarizes the weekly progress of an engineering team working on a multi-disciplinary project. The industrial design students' eating concept was criticized by teachers for being too self-focused. As a result, the engineering students were tasked with developing a multi-touch viimote whiteboard for presenting concepts. The whiteboard would use infrared and Bluetooth to transfer data between a computer and the writing screen. Next week, the engineering team will present the multi-touch whiteboard to the industrial design students for feedback.
This document appears to contain numbers and codes that provide information about physical attributes across different interior spaces. The numbers likely reference measurements or identifiers for 5 different areas/items.
This document appears to contain numbers and codes that provide information about physical attributes across different interior spaces. The numbers likely reference measurements or counts of objects that occur in 3-4 unspecified areas, with additional codes possibly differentiating between these spaces or elements within them.
This document appears to contain numbers and codes that may reference physical locations or items. Specifically, it includes numbers that could be inventory, part, or identification codes along with possible room or area designations. The document lacks context needed to provide a more detailed summary.
On January 5th, the author was assigned to check 30 motors, some of which were damaged. Each motor had two bearings - a front "OS" bearing and a rear "DS" bearing. To identify the bearings, the author checked labels stuck to the motors or had friends help remove the casing to directly observe the vanes on the rear bearing.
This document appears to be a technical manual or guide that discusses three main topics: math, circuit design, and an unnamed third topic. It likely provides information and instructions related to engineering or electronics. However, the document contains only numbers and symbols, so its full meaning and purpose cannot be determined from the limited information provided.
The document contains diagrams and descriptions of electrical and PLC laboratory experiments. It shows schematics of motor control circuits, PLC systems with analog and digital inputs and outputs, and terminal diagrams. Descriptions include wiring diagrams, component markings, and explanations of normally open and normally closed contact configurations.
This document contains MATLAB code that defines a function y(t) based on the value of the variable n over intervals from -2 to 0, 0 to 1, and 1 to 2. It sets y(t) to either 0 or 2n depending on which interval n is in, plots the resulting function, and increments t at each step of the for loop that iterates through values of n from -2 to 2 in increments of 0.01.
1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 4 , 2012
Name-Surname Pannipa Kongketyai
Student ID. 53211822
Group Name IS Company
Engineering Team Tossaphon(13), Thanunya(15),
Members Mutchima(24), Surachai (45)
Product Design
P.zatang, P.tip, P.erng, P.fon, P.ped, P.best, P.mild
Team Members
Weekly Progress
จากที่ได้ไปดูโปรเจคมาและสนใจ คือ การสร้างระบบควบคุม
อุณหภูมิแบบอัตโนมัติ เพื่อศึกษาและสังเกตดูพฤติกรรมของเซลล์ต่างๆใน
ร่างกายมนุษย์ และสามารถใช้งานร่วมกับเครื่อง INVERTED Microscope
โครงงานนี้ใช้อุปกรณ์ที่เรียกว่า แผ่นเทอร์โมอิเล็กทริก ในการสร้าง
ความร้อนและความเย็น ซึ่งควบคุมการทำางานด้วยไมโครคอนโทลเลอร์โดย
ใช้ PI-Controller
ส่วนของฮาร์ดแวร์ประกอบด้วย ส่วนของวงจรขับแรงดันและจะรับค่า
พัลส์วิดมอดูเลชั่น (PWM) ที่ส่งมาจากไมโครคอนโทลเลอร์เพื่อควบคุมแรง
ดันที่จ่ายให้แผ่นเทอร์โมอิเล็กทริก และมีส่วนที่วัดค่าอุณหภูมิบนฮาร์ดแวร์ที่
ออกแบบแล้วส่งค่ากลับมาที่ส่วนควบคุมและแสดงผลอุณหภูมิจริงที่วัดได้
ในส่ วนการออกแบบฮาร์ ด แวร์ จะประกอบไปด้ ว ย การออกแบบ
โครงสร้ า งของระบบควบคุ ม อุ ณ หภู มิ โ ดยจะคำา นึ ง ถึ ง วั ส ดุ ที่ ส ามารถแผ่
กระจายความร้อนได้ดีและขนาดของฮาร์ดแวร์ที่เหมาะสม ส่วนการออกแบบ
วงจรระบบควบคุมนั้นจะคำา นึงถึงกำา ลังงานที่จ่ายให้แผ่นเทอร์โมอิเล็กทริก
และการเลื อ กแผ่ น เทอร์ โ มอิ เ ล็ ก ทริ ก จะถู ก ระบุ คุ ณ สมบั ติ จ ากขนาดของ
ฮาร์ดแวร์
Figure 2.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
2. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 4 , 2012
Figure 1.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 4 , 2012
Name-Surname Pannipa Kongketyai
Student ID. 53211822
Group Name IS Company
Engineering Team Tossaphon(13), Thanunya(15),
Members Mutchima(24), Surachai (45)
Product Design
P.zatang, P.tip, P.erng, P.fon, P.ped, P.best, P.mild
Team Members
Weekly Progress
จากที่ได้ไปดูโปรเจคมาและสนใจ คือ การสร้างระบบควบคุม
อุณหภูมิแบบอัตโนมัติ เพื่อศึกษาและสังเกตดูพฤติกรรมของเซลล์ต่างๆใน
ร่างกายมนุษย์ และสามารถใช้งานร่วมกับเครื่อง INVERTED Microscope
โครงงานนี้ใช้อุปกรณ์ที่เรียกว่า แผ่นเทอร์โมอิเล็กทริก ในการสร้าง
ความร้อนและความเย็น ซึ่งควบคุมการทำางานด้วยไมโครคอนโทลเลอร์โดย
ใช้ PI-Controller
ส่วนของฮาร์ดแวร์ประกอบด้วย ส่วนของวงจรขับแรงดันและจะรับค่า
พัลส์วิดมอดูเลชั่น (PWM) ที่ส่งมาจากไมโครคอนโทลเลอร์เพื่อควบคุมแรง
ดันที่จ่ายให้แผ่นเทอร์โมอิเล็กทริก และมีส่วนที่วัดค่าอุณหภูมิบนฮาร์ดแวร์ที่
ออกแบบแล้วส่งค่ากลับมาที่ส่วนควบคุมและแสดงผลอุณหภูมิจริงที่วัดได้
ในส่ วนการออกแบบฮาร์ ด แวร์ จะประกอบไปด้ ว ย การออกแบบ
โครงสร้ า งของระบบควบคุ ม อุ ณ หภู มิ โ ดยจะคำา นึ ง ถึ ง วั ส ดุ ที่ ส ามารถแผ่
กระจายความร้อนได้ดีและขนาดของฮาร์ดแวร์ที่เหมาะสม ส่วนการออกแบบ
วงจรระบบควบคุมนั้นจะคำา นึงถึงกำา ลังงานที่จ่ายให้แผ่นเทอร์โมอิเล็กทริก
และการเลื อ กแผ่ น เทอร์ โ มอิ เ ล็ ก ทริ ก จะถู ก ระบุ คุ ณ สมบั ติ จ ากขนาดของ
ฮาร์ดแวร์
Figure 2.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreportformreal-120404111708-phpapp01/85/Weekly-report-form-real-1-320.jpg)
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 4 , 2012
Figure 1.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)