The document summarizes the manufacturing process, material selection, and cost analysis for a bamboo furniture product. The primary process is sawing, secondary is drilling and pushing, and tertiary is lacquering. Bamboo and eucalyptus wood were selected for their compatibility with cutting, drilling, and ability to withstand typical loads of 0.02-1.6 kg. The manufacturing costs were calculated based on material, time, and process costs for each component - top body, low body, legs, and branches - totaling 79.016 baht per part.

2. Manufacturing process sequence

3. Manufacturing process sequence
- What is your primary process? Why did you choose this process?
> Primary process is sawing because it match with bamboo.
- What is your secondary process? Why did you choose this process?
> Secondary process is drilling and pushing drilling we use electric
driller to drill and pushing we push corner and sharp out.
- What is your tertiary process? Why did you choose this process?
> Last lackeying because we want it to be beautiful.

4. Product function
- With your selected material, how is your material compatible with
product geometry and manufacturing processes?
> We choose bamboo, eucalyptus wood because we have to cut it and
drill it.
- What is the normal applied load to the material? Can your material take
such load?
> Load is about 0.02 – 1.6 kg and braches can carry 20 N of things.
- What is the normal ambient conditions to your material?
> It can use in every where.
- With your selected manufacturing process, how is your process
compatible with the product geometry?
> Process that we use can compatible with the product geometry by
using driller drill and sawing by saw.

5. Manufacturing cost

6. Manufacturing cost
Equation c=cM+cT+cP
cM=cw*wp(1-a)
cP=ct*t
Top Body
cM=20.6 Bath/part , cP=4.15 Bath/part
c=cM+cP=24.75 Bath/part
Low Body
cM=10.3 Bath/part , cP=2.5 Bath/part

7. Manufacturing cost
Leg
cM=0.042 Bath/part , cP=4.15 Bath/part
c=cM+cP=4.192 Bath/part
Branches
cM=0.665 Bath/part , cP=4.15 Bath/part
c=4.815 Bath/part

8. Manufacturing cost
Product
C=ctop+clow+cleg+cbranch
c=(24.75*1)+(12.8*1)+(4.192*3)+(4.815
*6)
c=79.016 Bath/part

9. Thank you for your attention