The document discusses developing a first prototype for a table that has a bamboo upper body, lower bamboo body, and wooden branches. It provides details on the manufacturing processes, materials, costs, and time spent on each process. Problems encountered with the first prototype included the bamboo not being straight and friction at the pivot point, and solutions for the second prototype are proposed to address these issues.

1. Group Innovation
12/01/12

2. Project modify
Change Legs to Base
Before After

3. Table Information
No Part Detail Mat. Process Req. Cost/ Cost
name Part total
1 Upper The gap for Bamboo Cut,Scrub,drill,wax 1 24.75
body branches
2 Lower The pivot point Bamboo Cut,scrub,wax 1 2.5
body of upper body
52.75
3 Branches Hanging shirts Wood Cut,scrub,wax 4 4.192
4 Base Fix to the lower Wood Cut,scrub,wax 1 8.73
body

6. Develop your first prototype
- Record the number of hours spent in each
manufacturing process.
1. Cut
- Upper Body 5 minutes
- Lower Body 4 minutes
- Branches 4 minutes
2. Drill
- Upper Body 4 minutes
3. Scrub 10 minutes
4. Wax 30 minutes

7. Develop your first prototype
- Provide difficulties and problems
encountered during the prototype
development.
= -The body of bamboo is not straight.
-The pivot point have friction.
- Provide the solutions for your second
prototype.
= -Fine the body of bamboo that straight.
-Coating by Jarabi.

8. Thank you