Kramer VM-3VN
•
0 likes•27 views
The VM-3VN is a composite video distribution amplifier that takes one video input and distributes it to three identical outputs. It provides buffering and isolation to distribute the signal while maintaining high bandwidth up to 430MHz. It has controls for adjusting the level and equalization of the output signals and fits into 1U of rack space when used with the optional rack adapter.
Report
Share
Report
Share
Download to read offline
Recommended
Kramer VM-3SN
The VM-3SN is a distribution amplifier that takes one s-Video input signal and distributes it to three identical outputs. It has a bandwidth of 135MHz and level controls for the Y and C signals. The unit is compact and can be rack mounted with an optional adapter. It requires a 12V DC power supply.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer 123-VXL
The 123Vxl is a line amplifier designed to compensate for signal losses and noise over long cable runs. It has a high bandwidth of 425MHz and uses differential circuitry to reduce noise. It includes controls for level, equalization, and signal termination. The device can be rack mounted with an optional adapter and operates on 12V DC power.
Kramer 105V
The 105V is a distribution amplifier that takes one composite video input signal and distributes it to five identical outputs while maintaining signal quality. It provides bandwidth up to 400MHz, level control, and distributes the signal across RCA connectors. The unit is compact and can be rack mounted with an optional adapter.
Kramer VS-33-VXL
The VS-33Vxl is a 3-input, 1-output video switcher that switches composite video signals during the vertical interval for glitch-free switching. It has a bandwidth of 46MHz and features genlock capability and contact closure remote switching. The compact design allows up to 3 units to mount side-by-side in a 1U rack space using an optional rack adapter.
Kramer 105-VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering and isolation. It has a bandwidth of 400MHz, uses BNC connectors, and includes a level control as well as rack mounting options. The device is compact at 12cm x 7.5cm x 2.5cm and has technical specifications including a maximum output of 2Vpp, differential gain of 0.1%, and S/N ratio of 80dB.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-42
The VM-42 is a compact composite video distribution amplifier and switcher that can distribute one composite video input signal to eight identical outputs. It can be configured as a 1:8 distribution amplifier, a 4x1 vertical interval switcher, or in other configurations such as two 1:4 distribution amplifiers or a 1:6 amplifier plus a 1:2 amplifier. It has a bandwidth of 200MHz and provides high quality distribution with low differential gain, phase, and crosstalk.
Recommended
Kramer VM-3SN
The VM-3SN is a distribution amplifier that takes one s-Video input signal and distributes it to three identical outputs. It has a bandwidth of 135MHz and level controls for the Y and C signals. The unit is compact and can be rack mounted with an optional adapter. It requires a 12V DC power supply.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer 123-VXL
The 123Vxl is a line amplifier designed to compensate for signal losses and noise over long cable runs. It has a high bandwidth of 425MHz and uses differential circuitry to reduce noise. It includes controls for level, equalization, and signal termination. The device can be rack mounted with an optional adapter and operates on 12V DC power.
Kramer 105V
The 105V is a distribution amplifier that takes one composite video input signal and distributes it to five identical outputs while maintaining signal quality. It provides bandwidth up to 400MHz, level control, and distributes the signal across RCA connectors. The unit is compact and can be rack mounted with an optional adapter.
Kramer VS-33-VXL
The VS-33Vxl is a 3-input, 1-output video switcher that switches composite video signals during the vertical interval for glitch-free switching. It has a bandwidth of 46MHz and features genlock capability and contact closure remote switching. The compact design allows up to 3 units to mount side-by-side in a 1U rack space using an optional rack adapter.
Kramer 105-VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering and isolation. It has a bandwidth of 400MHz, uses BNC connectors, and includes a level control as well as rack mounting options. The device is compact at 12cm x 7.5cm x 2.5cm and has technical specifications including a maximum output of 2Vpp, differential gain of 0.1%, and S/N ratio of 80dB.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-42
The VM-42 is a compact composite video distribution amplifier and switcher that can distribute one composite video input signal to eight identical outputs. It can be configured as a 1:8 distribution amplifier, a 4x1 vertical interval switcher, or in other configurations such as two 1:4 distribution amplifiers or a 1:6 amplifier plus a 1:2 amplifier. It has a bandwidth of 200MHz and provides high quality distribution with low differential gain, phase, and crosstalk.
Kramer VM-3SN
The VM-3SN is a distribution amplifier that takes one s-Video input signal and distributes it to three identical outputs. It has a bandwidth of 135MHz and level controls for the Y and C signals. The compact unit can be rack mounted with an optional adapter and is powered by a 12V DC power supply.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer PT-102VN
The PT-102VN is a composite video distribution amplifier that takes one video input and provides two identical outputs. It buffers and isolates the input signal to distribute it to the two outputs. It has controls for adjusting the gain and equalization, and can be rack mounted. The amplifier operates up to 430MHz bandwidth and has specifications for low differential gain, phase, and noise.
Kramer PT-102 VN
The PT-102VN is a composite video distribution amplifier that takes one video input and provides two identical outputs. It buffers and isolates the input signal to distribute it to the two outputs. It has controls for adjusting the gain and equalization, and can be rack mounted. The amplifier operates up to 430MHz bandwidth and has specifications for low differential gain, phase, and noise.
Kramer 123Vxl
The 123Vxl is a line amplifier designed to compensate for signal losses and noise over long cable runs. It has a high bandwidth of 425MHz and uses differential circuitry to reduce noise. It includes controls for level, equalization, and signal termination. The device can be rack mounted with an optional adapter and operates on 12V DC power.
Kramer VP-200xln
The VP-200xln is a line and distribution amplifier for computer graphics video signals up to 400MHz bandwidth. It provides level and equalization controls to compensate for signal loss over long cable runs. It has one HD-15 input and two HD-15 outputs, with controls for individually setting the AC/DC coupling of the red, green, and blue signals. It is compact and can be rack mounted using an optional adapter.
Kramer VP-200-XLN
The VP-200xln is a line and distribution amplifier for computer graphics video signals up to 400MHz. It provides level and equalization controls to compensate for signal loss over long cable runs. It has one HD-15 input and two HD-15 outputs, with controls for individually setting the AC/DC coupling of the red, green, and blue signals. The unit is compact and can be rack mounted using an optional adapter.
Kramer PT-103V
The PT-103V is a composite video distribution amplifier that takes one video input signal, buffers and isolates it, and distributes it to three identical outputs. It has a high bandwidth of 407MHz, level and equalization controls, and a compact size that allows four units to be rack mounted side-by-side in 1U of rack space using an optional adapter.
Kramer PT-103V
The PT-103V is a composite video distribution amplifier that takes one video input signal, buffers and isolates it, and distributes it to three identical outputs. It has a high bandwidth of 407MHz, level and equalization controls, and a compact size that allows four units to be rack mounted side-by-side in 1U of rack space using an optional adapter.
Kramer PT-102SN
The PT-102SN is a compact video distribution amplifier that takes one s-Video input signal and distributes it to two identical s-Video outputs. It provides bandwidth up to 150MHz and has independent luma and chroma gain controls. Measuring only 2.45" x 2.04" x 0.96", four units can fit side-by-side in a standard 1U rack space with an optional rack adapter.
Kramer PT-102 SN
The PT-102SN is a compact video distribution amplifier that takes one s-Video input signal and distributes it to two identical s-Video outputs. It provides bandwidth up to 150MHz and has independent luma and chroma gain controls. Measuring only 2.45" x 2.04" x 0.96", four units can fit side-by-side in a single rack unit space with an optional rack adapter.
Kramer 104-LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found in long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 104LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found in long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 104LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found on long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer VS-202YC
The VS-202YC is a 2x1:2 s-Video switcher and distribution amplifier that switches one of two s-Video inputs to two identical outputs. It has high bandwidth of 520MHz, compact size, front panel and RS-232 control, and can be rack mounted with optional adapter. The unit distributes and switches s-Video signals with low distortion and crosstalk.
Kramer VS-201YC
The VS-201YC is a high quality 2x1 s-video switcher that switches between two s-video input signals and sends the selected signal to a single output. It has high bandwidth of 520MHz, switching via front panel buttons or RS-232 control, and can be rack mounted with an optional adapter.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Decimator MD-HX hardware-manual_fv1.3
This document provides an overview and operating manual for the MD-HX HDMI/SDI Cross Converter. The MD-HX can simultaneously convert between HDMI and SDI while supporting 3G, HD, and SD formats. It also includes scaling and frame rate conversion capabilities. The operating manual describes the unit's four operation modes and provides details on its menu system for controlling inputs, outputs, scaling settings, and other parameters using the front panel LCD and buttons.
Panasonic AV-HS410 Multiformat Vision Mixer HD/SD
The AV-HS410 is a live production switcher that provides:
1) High-end performance and functions in a compact body, including 9 video inputs, 6 outputs, chroma keying, transitions, and memory functions.
2) An intuitive user interface designed for live operation, with a built-in LCD monitor, memory preview, and multi-viewer display.
3) Expandability through optional input/output boards and a software development kit to add customized functions.
More Related Content
Similar to Kramer VM-3VN
Kramer VM-3SN
The VM-3SN is a distribution amplifier that takes one s-Video input signal and distributes it to three identical outputs. It has a bandwidth of 135MHz and level controls for the Y and C signals. The compact unit can be rack mounted with an optional adapter and is powered by a 12V DC power supply.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer PT-102VN
The PT-102VN is a composite video distribution amplifier that takes one video input and provides two identical outputs. It buffers and isolates the input signal to distribute it to the two outputs. It has controls for adjusting the gain and equalization, and can be rack mounted. The amplifier operates up to 430MHz bandwidth and has specifications for low differential gain, phase, and noise.
Kramer PT-102 VN
The PT-102VN is a composite video distribution amplifier that takes one video input and provides two identical outputs. It buffers and isolates the input signal to distribute it to the two outputs. It has controls for adjusting the gain and equalization, and can be rack mounted. The amplifier operates up to 430MHz bandwidth and has specifications for low differential gain, phase, and noise.
Kramer 123Vxl
The 123Vxl is a line amplifier designed to compensate for signal losses and noise over long cable runs. It has a high bandwidth of 425MHz and uses differential circuitry to reduce noise. It includes controls for level, equalization, and signal termination. The device can be rack mounted with an optional adapter and operates on 12V DC power.
Kramer VP-200xln
The VP-200xln is a line and distribution amplifier for computer graphics video signals up to 400MHz bandwidth. It provides level and equalization controls to compensate for signal loss over long cable runs. It has one HD-15 input and two HD-15 outputs, with controls for individually setting the AC/DC coupling of the red, green, and blue signals. It is compact and can be rack mounted using an optional adapter.
Kramer VP-200-XLN
The VP-200xln is a line and distribution amplifier for computer graphics video signals up to 400MHz. It provides level and equalization controls to compensate for signal loss over long cable runs. It has one HD-15 input and two HD-15 outputs, with controls for individually setting the AC/DC coupling of the red, green, and blue signals. The unit is compact and can be rack mounted using an optional adapter.
Kramer PT-103V
The PT-103V is a composite video distribution amplifier that takes one video input signal, buffers and isolates it, and distributes it to three identical outputs. It has a high bandwidth of 407MHz, level and equalization controls, and a compact size that allows four units to be rack mounted side-by-side in 1U of rack space using an optional adapter.
Kramer PT-103V
The PT-103V is a composite video distribution amplifier that takes one video input signal, buffers and isolates it, and distributes it to three identical outputs. It has a high bandwidth of 407MHz, level and equalization controls, and a compact size that allows four units to be rack mounted side-by-side in 1U of rack space using an optional adapter.
Kramer PT-102SN
The PT-102SN is a compact video distribution amplifier that takes one s-Video input signal and distributes it to two identical s-Video outputs. It provides bandwidth up to 150MHz and has independent luma and chroma gain controls. Measuring only 2.45" x 2.04" x 0.96", four units can fit side-by-side in a standard 1U rack space with an optional rack adapter.
Kramer PT-102 SN
The PT-102SN is a compact video distribution amplifier that takes one s-Video input signal and distributes it to two identical s-Video outputs. It provides bandwidth up to 150MHz and has independent luma and chroma gain controls. Measuring only 2.45" x 2.04" x 0.96", four units can fit side-by-side in a single rack unit space with an optional rack adapter.
Kramer 104-LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found in long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 104LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found in long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 104LN
The 104LN is a high-performance differential line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found on long cable runs. It has a high bandwidth of 423MHz, differential circuitry, level and EQ controls, and can be rack mounted in a 1U space with an optional adapter. The 104LN amplifies a single differential composite video input to four 1Vpp outputs with a bandwidth of 423MHz and differential gain of 0.22%.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer VS-202YC
The VS-202YC is a 2x1:2 s-Video switcher and distribution amplifier that switches one of two s-Video inputs to two identical outputs. It has high bandwidth of 520MHz, compact size, front panel and RS-232 control, and can be rack mounted with optional adapter. The unit distributes and switches s-Video signals with low distortion and crosstalk.
Kramer VS-201YC
The VS-201YC is a high quality 2x1 s-video switcher that switches between two s-video input signals and sends the selected signal to a single output. It has high bandwidth of 520MHz, switching via front panel buttons or RS-232 control, and can be rack mounted with an optional adapter.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Similar to Kramer VM-3VN (20)
More from AV ProfShop
Decimator MD-HX hardware-manual_fv1.3
This document provides an overview and operating manual for the MD-HX HDMI/SDI Cross Converter. The MD-HX can simultaneously convert between HDMI and SDI while supporting 3G, HD, and SD formats. It also includes scaling and frame rate conversion capabilities. The operating manual describes the unit's four operation modes and provides details on its menu system for controlling inputs, outputs, scaling settings, and other parameters using the front panel LCD and buttons.
Panasonic AV-HS410 Multiformat Vision Mixer HD/SD
The AV-HS410 is a live production switcher that provides:
1) High-end performance and functions in a compact body, including 9 video inputs, 6 outputs, chroma keying, transitions, and memory functions.
2) An intuitive user interface designed for live operation, with a built-in LCD monitor, memory preview, and multi-viewer display.
3) Expandability through optional input/output boards and a software development kit to add customized functions.
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
The document provides specifications for Panasonic's AW-HE40 series of integrated full HD cameras. It has a 30x optical zoom lens and supports Power over Ethernet Plus (PoE+) for installation flexibility. The cameras feature a 1/2.3-type MOS sensor, 30x optical zoom lens, 40x total zoom with super resolution, and support various outputs including HDMI, SDI, and IP. They can be controlled remotely over IP from devices like PCs and smartphones.
Sony MCX-500 Live Production Switcher
The MCX-500 is an affordable multi-camera live production switcher that allows a single operator to mix up to 8 video sources plus titles for live events. It provides professional 3G-SDI, HDMI, and composite video inputs along with integrated recording to SD cards. The switcher offers features like chroma keying, transitions, picture-in-picture, and live streaming for engaging live productions and events. Controls are designed for intuitive single-operator use but can also be controlled remotely via tablet or PC.
JVC GY-HM200 GY-HM170 Brochure AVProfShop
The document describes two compact 4K camcorders, the GY-HM200 and GY-HM170. Both cameras feature a 12x optical zoom lens, 4K video recording at up to 150Mbps to SD cards, HD recording up to 50Mbps in 4:2:2 color sampling, and dual SD card slots. The GY-HM200 additionally offers live streaming of HD video over WiFi or 4G LTE while continuing to record locally.
JVC GY-HM620 Brochure AVProfShop
The document provides information on the JVC GY-HM620 HD/SD memory card camcorder. It summarizes the key features as having a 23x Fujinon lens, 3 full HD 1/3-inch CMOS sensors, and a FALCONBRID image processing engine for superior image quality. It records in multiple formats including MOV, MP4, and AVCHD and has dual SD card slots for simultaneous or relay recording. The camcorder offers various professional features such as XLR audio inputs, timecode sync, and HDMI and SDI outputs.
JVC GY-HM660 Brochure AVProfShop
The document summarizes the features of the JVC GY-HM660 HD/SD memory card camcorder. It can live stream in full HD up to 12Mbps via Wi-Fi, 4G LTE, or Ethernet. It has a 23x optical zoom lens, dual SD card slots, and records to multiple formats including H.264 up to 50Mbps. The camcorder also has advanced connectivity including SDI and HDMI outputs, USB ports, and XLR audio inputs for professional video applications such as electronic news gathering.
Datavideo MS-2800 Brochure
This document provides an overview of the MS-2800 mobile video studio system and its components. It includes diagrams showing how the various components such as cameras, switchers, audio mixers, and monitors connect together via SDI and audio cables. Key components highlighted include the MS-2800A/B 12-channel mobile video switchers, DAC-60 SDI to VGA converters, AM-100 audio mixer, and NVS-20 video streaming server.
Datavideo HS-2800 Brochure
The document is a 2012-2013 product guide that describes the HS-2800, a 12-channel portable video studio. The HS-2800 features dual PIP and dual DSK inputs, 8 HD-SDI inputs and outputs, HDMI connectivity, and can be used with accessories like a 42" LCD monitor, digital video recorder, audio mixer, and WiFi bridging unit.
Datavideo DVK-200 Brochure
The Datavideo DVK-200 is a standalone chromakey solution that allows users to create virtual studio effects without complicated software. It supports connections from video, computer, and DVI sources and can key against blue, green, white, or black backgrounds. The DVK-200 has advanced key adjustments, input/output options, and can be controlled via RS-232. It is suitable for education, small studios, wedding videography, and other applications.
Datavideo ITC-100 Brochure
The Datavideo ITC-100 Intercom system provides clear communication between production crew members through an 8-channel intercom setup. It features a standard 1U rack design for easy integration into existing systems. Each channel supports talkback functions as well as dual color tally lights to indicate speaker status. Communication can occur between individuals or broadcast to all channels simultaneously from the director. The system helps coordinate camera operators, lighting, and more from a control room during live productions.
Datavideo RMC-180 Brochure
The RMC-180 is a PTZ camera control unit that can control up to 4 PTC-100 pan, tilt, and zoom cameras. It provides functions like iris, focus, preset positions, and tally indicators for each camera. The RMC-180 integrates easily with Datavideo SE-2000R and HS-2000 HD switchers and allows control over camera balance, noise reduction, and other settings from the switcher. It connects to PTZ cameras via RS-422 and can be controlled over IP through a network video server.
Datavideo SE-600 Brochure
The document provides an overview of an audio/video system setup including various components such as a Datavideo SE-600 8-channel digital video switcher, TLM-170H 17.3" HD/SD LCD monitors, a DN-600 SD digital video recorder, ITC-100 intercom system, DAC-60 SDI to VGA converter, and NVS-20 H.264 video streaming server. The diagram outlines the connections between the components including video, audio, network, and control connections to integrate the system.
Datavideo SE-500 Brochure
The document outlines an audio visual system setup including a 4-channel digital video switcher connected to 7-inch LCD monitors, an SD digital video recorder, and an H.264 video streaming server. The system allows for video and audio switching, recording, streaming, and intercom communication, and includes connections for cameras, projectors, and other peripheral devices. Tally lights indicate the active video and audio sources.
Atomos Range Brochure
1. Atomos produces field monitor-recorders that allow video professionals to record directly from camera sensors to formats like Apple ProRes and Avid DNxHR on affordable HDD/SSD media. Their devices also function as professional monitors, playback devices, and basic editing tools.
2. The document highlights several Atomos product lines - the high-end Shogun Inferno, the mid-range Flame series including the Shogun Flame and Ninja Flame, and the entry-level Blade series. All are designed for professional recording, monitoring, and basic editing functions.
3. A case study describes how the Cloakroom Media production company used a Shogun Flame and N
Sony PXW-Z450
The PXW-Z450 is a new 4K shoulder camcorder from Sony that records using the XAVC format. It has a newly developed 2/3-type Exmor RTM CMOS sensor that provides high quality 4K and HD images. The camcorder is compatible with a wide range of existing HD lenses through its B4 lens mount and also supports 4K lenses. It offers features such as low power consumption, wireless capabilities and flexible recording formats that make it suitable for live news gathering and television production in both 4K and HD.
Datavideo SE-2200 6 input HD broadcast quality switcher
The document provides instructions and specifications for the SE-2200 production switcher. It includes a packing list, descriptions of the front and rear panels, explanations of connection types and ports, and instructions for operating keyboard controls and menu options. Dimensions and technical specifications are also provided.
More from AV ProfShop (20)
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
Datavideo SE-2200 6 input HD broadcast quality switcher
Datavideo SE-2200 6 input HD broadcast quality switcher
Recently uploaded
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Recently uploaded (20)
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Kramer VM-3VN
- 1. VM-3VN 1:3 Composite Video Distribution Amplifier The VM-3VN is a distribution amplifier for composite video signals. The unit takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs.
- 2. VM-3VN FEATURES TECHNICAL SPECIFICATIONS High Bandwidth - 430MHz (-3dB). INPUT: 1 composite video on a BNC Selectable Input Signal Termination. connector. Level (Gain) & EQ (Peaking) Controls. OUTPUTS: 3 composite video on BNC Compact Kramer TOOLS™ - 3 units can be connectors. rack mounted side-by-side in a 1U rack space MAX. OUTPUT 1.8Vpp. with the optional RK-3T rack adapter LEVEL: BANDWIDTH (- 430MHz. 3dB): DIFF GAIN: 0.12%. DIFF PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 74.3dB. CONTROL: Level: -1.6 to +6dB; Equalization: 0 to +6dB. COUPLING: AC. POWER SOURCE: 12V DC, 27mA. DIMENSIONS: 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-3T 19" rack adapter.