AI+A11Y 11MAY2024 HYDERBAD GAAD 2024 - HelloA11Y (11 May 2024)
Vetec presentation 2018
1.
2. Vetec is a Danish company in the
development and manufacturing of
high quality load cells for hoists and
cranes.
In 2017 Vetec was acquired by VeNo
Invest.
4. To provide weighing and safety solutions that
meet our customers’ need to increase safety
and efficiency.
Through user-friendly and flexible products
Vetec wish to become the customers’ preferred
choice in the market for weighing and safety
solutions for hoists and cranes.
5. Vetec’s products are developed by in-house weighing technicians in
close cooperation with leading crane companies.
Vetec’s in-house technical department provide sales, technical support,
repair and calibration services.
6. Vetec A/S cooperates with dealers throughout the world and
continuously expands the dealer network.
Our dealers fulfill requirements of competence, product knowledge,
excellent service and support and represent a great part of our
success.
8. • Designed and manufactured in DK for high quality assurance.
• Highly accurate and reliable, ±0,2% FS accuracy.
• Very clear red digit LED display. Visible at long distances and in bright daylight.
• Robust high strength steel construction for use in hostile environments.
• Flexible suspension, designed to minimize torsional effects.
• Supplied with full certificate of calibration.
9. • Designed and manufactured in DK for high quality assurance.
• The compact size provides a minimal lifting height reduction. L150 mm.
• Quick and precise installation with sipmle tools.
• Can easily be adjusted to fit different wire types and capacities.
• Hysteresis max 4% FS.
• Available with 1 or 2 cut off points.
10. • Designed and manufactured in DK for high quality assurance.
• Electronic clamp-on tensiometer, universal fit.
• Highly accurate and reliable, ±1% FS accuracy.
• Minimal lifting height reduction, Down to L100 mm.
• Quick and easy to install on the dead end of the wire rope.
11. • Highly accurate and reliable, ±1% FS accuracy.
• Line pull 0-12T.
• Heavy duty ball bearing construction.
• Hardened stainless load pin.
12. • Designed according to customer’s specifications as direct replacement for
load bearing pins in lifting equipment.
• Provides the highest accuracy within weighing, ±0,1% FS accuracy.
• Range 0,1T to 1000T.
• Robust stainless steel construction.
• IP68.
13. • Amplifier (OL3000).
• Remote control (Tiger system).
• Panelmeter and large display
(built-in amplifier).
14. Vetec’s products are in general manufactured
in relation to EN 13980 safety standards and
can be certified to ATEX.
Vetec solutions are supplied with cerfications,
datasheets and user guides.
16. Vetec A/S provides load cells for various environments, including
explosive and corrosive environments.
17. Vetec A/S developed and manufactured a complete weighing- and overload system for a ship with two 125 tons
A-Frame.
The first part of the system consisted of two load pins, which was installed in the cranes. The two load pins were
connected to two small displays in the technical room and two large displays on the deck.
The purpose was that the crew easily, safely and efficiently could make sure that all the lifts occurred in the most
optimal way, so that the projects could be executed with maximum efficiency and minimal risks.
18. When a crane company had to lift a large object with a 20t overhead travelling cranes containing two cats, the
company used a strain gauge based load cell system from Vetec.
The system was able to measure and show the weight on the two cats on two displays. A third display showed the
total weight on the two cats.
Furthermore, a remote control with display controlled the crane, while simultaneously showing the weight on the cats.
The advantages of the system were that the staff could get a quick overview of the lift, and the system could prevent
the crane from being overloaded.