A loom is a device used to produce weave fabrics . It's the central point of the whole process of fabric production. ... MODERN LOOM Modern loom means Shuttle less loom. Its development during the 20th century. Several types of modern loom have Come for industrial use.
Process Flow Chart of Garments Manufacturing | Sequence of Garments Production Process/ Process Flow Chart of Garments Manufacturing | Sequence of Garments Production Process/ Knit Garments factory
Garments Manufacturing Flow chart
How to make garments ?
RMG Flow Chart
A loom is a device used to produce weave fabrics . It's the central point of the whole process of fabric production. ... MODERN LOOM Modern loom means Shuttle less loom. Its development during the 20th century. Several types of modern loom have Come for industrial use.
Process Flow Chart of Garments Manufacturing | Sequence of Garments Production Process/ Process Flow Chart of Garments Manufacturing | Sequence of Garments Production Process/ Knit Garments factory
Garments Manufacturing Flow chart
How to make garments ?
RMG Flow Chart
Presentation made by Anshu Chauhan, Asstt Manager, Colorant India,at All India Seminar on Lean Management Techniques & the application for textile MSME
What is The Four Point System ?
Description About The Four Point System.
Measurement Process of The Four Point System.
Example of The Four Point System
4 Point Fabric Inspection System in Textile IndustryMd. Sirajul Islam
The most popular system for fabric inspection is 4 point system. Its very easy process. ASTM defines- It is a Standard Test Method for Visual Inspecting and Grading Fabrics.
ASTM testing and other material testing services available at MicomMichel Comtois
Corrosion testing is often done by using ASTM B117. Corrosion is the gradual destruction of materials, (usually metals), by chemical reaction with its environment. Corrosion degrades the useful properties of materials and structures, including strength, appearance and permeability to liquids and gases.
Presentation made by Anshu Chauhan, Asstt Manager, Colorant India,at All India Seminar on Lean Management Techniques & the application for textile MSME
What is The Four Point System ?
Description About The Four Point System.
Measurement Process of The Four Point System.
Example of The Four Point System
4 Point Fabric Inspection System in Textile IndustryMd. Sirajul Islam
The most popular system for fabric inspection is 4 point system. Its very easy process. ASTM defines- It is a Standard Test Method for Visual Inspecting and Grading Fabrics.
ASTM testing and other material testing services available at MicomMichel Comtois
Corrosion testing is often done by using ASTM B117. Corrosion is the gradual destruction of materials, (usually metals), by chemical reaction with its environment. Corrosion degrades the useful properties of materials and structures, including strength, appearance and permeability to liquids and gases.
Cascade TEK - Salt Fog / UV / IP TestingCascade TEK
Cascade TEK's Salt Fog chambers are controlled corrosive environments designed to test the corrosion resistance of products. Salt Fog Testing is typically performed on coated or painted samples for marine, automotive, and military equipment. Salt Fog Testing is also an excellent way to test the permeability of coatings and seals.
www.cascadetek.com
DuraForm FR 100 Plastic - SLS Systems - Material properties (EN)Quoc Tuan Duong, ing.
In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today’s human environmental safety for many other consumer applications. For electrical appliances, aerospace and aircraft cabin, compartment & cargo applications, etc.
Similar to UV testing infographic - Micom Laboratories (10)
Different appendices to numerous material tests offered at Micom LaboratoriesMichel Comtois
Learn more about different appendices about Color Measurement, Classification of blistering test results according to ASTM D714, Classification of corrosion test results according to ASTM D610, Classification of creepage test results according to ASTM D1654 and Classification of adhesion test results according to ASTM D3359. Learn more.
Comment choisir les essais de meubles de bureau ?Michel Comtois
Si vous souhaitez vendre votre mobilier de bureau au Canada ou aux États-Unis, vos produits doivent se conformer à des normes précises. L’arbre décisionnel qui suit vous aidera à déterminer les essais les plus applicables.
Comment choisir les bons essais d’emballage ?Michel Comtois
De nombreux essais sont disponibles pour tester la performance et la durabilité de vos emballages. L’arbre décisionnel qui suit vous aidera à mieux comprendre com- ment choisir le bon essai d’emballage pour vos produits.
What is the difference between the “true” color of an item and its “perceived” color (by the human eye)? Learn more about the true color vs perceived color.
Ce document présente une la nouvelle norme de chaises BIFMA pour usagers de masse plus importante. Apprenez davantage. Contactez nous pour plus de renseignements.
2005 mechanical testing to ANSI/BIFMA x5.4 & quote lounge and public seating ...Michel Comtois
This document shows the 2005 mechanical testing to ANSI/BIFMA x5.4 & quote lounge and public seating tests compared to the 2012 official version. Learn more:
Cette présentations offre un aperçu des services offerts chez les Laboratoires Micom. Micom offre les essais sur les matériaux, les essais sur emballage, les essais UV, et plusieurs autres. Contactez nous pour plus d'information.
This packaging testing presentation was given at Norampac. Learn more about package testing services offered at Micom Laboratories. Contact us for more information.
ISTA 3A Présentation sur les essais sur emballageMichel Comtois
Cette présentation des Laboratoires Micom offre plus d'information sur les essais sur emballage. La présentation a été donnée à Bombardier Recreational Products & Vehicles.
ASTM B117 is an accelerated corrosion testMichel Comtois
ASTM B117 is used to produce relative corrosion resistance information for specimens of metals and coated metals exposed in a standardized corrosive environment.
According to ASTM International, ASTM B117, in and of itself, is not a test specification. Rather, it outlines the standard practice for operating salt spray (fog) apparatus. B117 is a document establishing the parameters and requirements for operating a salt spray test chamber. It specifies how to create and maintain the salt fog test environment so that results can be achieved consistently from lab to lab and chamber to chamber.
ISTA 3A Packaging Test for .COM retailers offered at Micom LaboratoriesMichel Comtois
ISTA 3A tests packaged products for parcel delivery system shipment weighing 150 lbs or less. This test is used to simulate courier companies shipping environments. ISTA 3A is often required by .COM retailers.
Micom offers ISTA 3A testing as part of its Package testing services. Alternatively, the ASTM D4169 can also be considered.
ISTA 1A - Packaging test offered at Micom LaboratoriesMichel Comtois
ISTA 1A tests packaged products weighting 150 LB (68 KG) or less. It can be considered as one of the most basic test sequence of all of the ISTA test procedures. It can alsos to be considered as a screening test. If you need to qualify your package for selling to the .com retailers, ISTA 3A should be used instead. Micom offers ISTA 1A testing as part of its Package testing services.
UV Testing Decision Tree ASTM G154 vs. ASTM G155Michel Comtois
When it comes to UV exposure testing, many tests, standards and methods exist, and Micom is happy to offer numerous different UV tests that, alone and combined, help our customers better understand their products. This decision tree will help you understand when to choose ASTM G154 or ASTM G155 as a UV Test.
ASTM B117 Testing quality control by Micom LaboratoriesMichel Comtois
ASTM B117 Testing, also known as a Standard Practice for Operating Salt Spray (Fog) Apparatus, is used to analyze relative corrosion for specimens of metals and coated metals exposed to various simulated climatic conditions in a controlled environment. This testing practice was initially published in 1939 and rapidly gained worldwide acceptance across all major industry segments.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
1. www.micomlab.com
UV TESTING
MECHANICAL
PROPERTIES
AESTHETICS
PRIMARY
CONCERN
EXPOSURE
CONDITIONS
USE
ASTM G154
Select
Fluorescent type
USE
ASTM G155
Outdoors:
Use Boro-Boro
combination filters
Indoors:
Use Sodalime-Boro
filter combination
• UVA-340 (outdoor)
• UVA-351 (indoor)
OPERATIONAL PARAMETERS
• Irradiance
• Over all time exposure
• Cabinet temperature
• Relative humidity
• Light/condensation
POST-TEST MEASUREMENTS
EXAMPLES:
• Tensile Strength
• % Elongation at break
• Bend test
• Abrasion
• Color (Delta E)
• Gloss
POST-TEST MEASUREMENTS
EXAMPLES:
• Color (Delta E)
• Gloss
• Haze
• DOI
• RIQ
• Rspec
• Pencil Hardness
OPERATIONAL PARAMETERS
• Irradiance
• Over all time exposure
• Air temperature
• Black panel temperature
• Relative humidity
• Light - dark cycle
How to choose between ASTM G154 and ASTM G155 UV Tests?
The following infographic and decision tree will help
you understand when to choose ASTM G154 and when
to choose ASTM G155 UV tests.