Unmanned Aerial Systems
•
0 likes•33 views
QinetiQ leads the growth and delivery of unmanned aviation services. QinetiQ Europe’s largest commercial operator of unmanned aircraft, executing services in difficult environments. Visit for more info @ http://www.qinetiq.com/services-products/air/Pages/unmanned-air-services.aspx
Report
Share
Report
Share
Download to read offline
Recommended
Dr Jancovich
FANS (Future Air Navigation System) uses satellite technology and data links to allow for more efficient air traffic management. It allows for reduced separation between planes, more direct routing, and two-way digital communication between air traffic control and pilots. FANS includes installations like ADS-B for surveillance, GPS, and CPDLC for text-based clearance and guidance communication to replace some voice radio. Its implementation aims to reduce fuel costs and increase airspace capacity over traditional radar-based systems.
Aircraft System Integration
Solution includes design of systems architectures and mechanical and electrical installations, instrumentation of the integrated systems, and certification for ground and flight tests. visit for more info @ http://www.qinetiq.com/services-products/air/Pages/aircraft-system-integration-and-upgrades.aspx
Aviation Research
QinetiQ help aircraft fly more safely and for longer by assuring the safe, efficient and cost-effective delivery of airborne capability. For more information @ http://www.qinetiq.com/services-products/air/Pages/through-life-aircraft-support.aspx
Aerospace Test And Evaluation
QinetiQ’s long-arm centrifuge facility enables astronauts and fast-jet pilots to train for launch and landing, monitoring their health and performance during G-exposure and G-acceleration. For more info @ http://www.qinetiq.com/services-products/air/Pages/air-test-facilities.aspx
Kalmar DRF
The document summarizes a sales brochure for the Kalmar DRF400-450 reachstacker. It describes the reachstacker as the most innovative ever built, highlighting its extensive testing including over a year of testing prototypes with customers. It details many improvements over previous models such as increased reliability, service intervals, and environmental performance. The document emphasizes the reachstacker's benefits for customers such as improved efficiency and reduced operating costs.
CASING_SOLUTIONS_OGBAINBIRI_FIELD_
AOSO Orwell successfully ran 9-5/8" and 10-3/4" casing strings to a total depth of 4,900 meters in an inclined well using a Tesco Casing Drive System. The casing was run at an average speed of 13 joints per hour, saving time and money for the client. Real-time torque monitoring helped ensure successful casing installation without issues. Using the CDS provided operational benefits like continued circulation while tripping in casing.
LineCard
Graham C. Cooper is a representative for Schenck Process LLC, located in Milford, OH. The document lists various weighing, feeding, screening, dust collection, process injection, and conveying products and systems provided by Schenck Process for minerals and metals industries. These include belt scales, bin and hopper scales, linear vibrating screens up to 4.5m x 11.5m, dust collection systems handling up to 250,000cfm, rotary feeders for carbon injection with 0.5% accuracy, and pneumatic conveying systems for abrasive materials. All solutions are backed by in-house engineering and project management support.
Engine Kaveri
Kaveri engine has 7 components, these components are Low Pressure and High Pressure Compressors, Annular Combustor, High Pressure and Low Pressure Turbines, Afterburner System, Engine Gearbox, Electro-Hydro Mechanical Control Systems, Kaveri Digital Engine Control Unit.
Recommended
Dr Jancovich
FANS (Future Air Navigation System) uses satellite technology and data links to allow for more efficient air traffic management. It allows for reduced separation between planes, more direct routing, and two-way digital communication between air traffic control and pilots. FANS includes installations like ADS-B for surveillance, GPS, and CPDLC for text-based clearance and guidance communication to replace some voice radio. Its implementation aims to reduce fuel costs and increase airspace capacity over traditional radar-based systems.
Aircraft System Integration
Solution includes design of systems architectures and mechanical and electrical installations, instrumentation of the integrated systems, and certification for ground and flight tests. visit for more info @ http://www.qinetiq.com/services-products/air/Pages/aircraft-system-integration-and-upgrades.aspx
Aviation Research
QinetiQ help aircraft fly more safely and for longer by assuring the safe, efficient and cost-effective delivery of airborne capability. For more information @ http://www.qinetiq.com/services-products/air/Pages/through-life-aircraft-support.aspx
Aerospace Test And Evaluation
QinetiQ’s long-arm centrifuge facility enables astronauts and fast-jet pilots to train for launch and landing, monitoring their health and performance during G-exposure and G-acceleration. For more info @ http://www.qinetiq.com/services-products/air/Pages/air-test-facilities.aspx
Kalmar DRF
The document summarizes a sales brochure for the Kalmar DRF400-450 reachstacker. It describes the reachstacker as the most innovative ever built, highlighting its extensive testing including over a year of testing prototypes with customers. It details many improvements over previous models such as increased reliability, service intervals, and environmental performance. The document emphasizes the reachstacker's benefits for customers such as improved efficiency and reduced operating costs.
CASING_SOLUTIONS_OGBAINBIRI_FIELD_
AOSO Orwell successfully ran 9-5/8" and 10-3/4" casing strings to a total depth of 4,900 meters in an inclined well using a Tesco Casing Drive System. The casing was run at an average speed of 13 joints per hour, saving time and money for the client. Real-time torque monitoring helped ensure successful casing installation without issues. Using the CDS provided operational benefits like continued circulation while tripping in casing.
LineCard
Graham C. Cooper is a representative for Schenck Process LLC, located in Milford, OH. The document lists various weighing, feeding, screening, dust collection, process injection, and conveying products and systems provided by Schenck Process for minerals and metals industries. These include belt scales, bin and hopper scales, linear vibrating screens up to 4.5m x 11.5m, dust collection systems handling up to 250,000cfm, rotary feeders for carbon injection with 0.5% accuracy, and pneumatic conveying systems for abrasive materials. All solutions are backed by in-house engineering and project management support.
Engine Kaveri
Kaveri engine has 7 components, these components are Low Pressure and High Pressure Compressors, Annular Combustor, High Pressure and Low Pressure Turbines, Afterburner System, Engine Gearbox, Electro-Hydro Mechanical Control Systems, Kaveri Digital Engine Control Unit.
Kaveri engine- Kaveri Engine DRDO
Kaveri engine is an afterburning turbofan project developed by the GTRE, lab under DRDO, India. GTRE is now running two separate successor engine programmes, the K9+ and the K10. Click here to know more about kaveri Engine : http://www.drdo.gov.in/drdo/English/index.jsp?pg=Kaveri.jsp
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...Machine Tool Systems Inc.
Please find attached a case study about the production of probes for measuring speed and temperature in turbo engines. These probes have been invented by the Startup Vetoflow. The formation of the company was supported by the 3D Printing Cluster. A network which was founded by EOS, Strascheg Center for Entrepreneurship and UnternehmerTUM. CPD Presentation: Car Park Ventilation
An explanation of the basic legislative requirements and how these are achieved using impulse ventilation
Application of impulse ventilation, both for carbon monoxide and for smoke clearance or smoke control
The advantages of impulse ventilation over traditional ducted extract systems
Use of CFD
Control systems used: carbon monoxide and heat detection systems
How impulse ventilation can be used to control smoke movement, allowing smoke control to be used, as part of a fire strategy, to compensate for the relaxation of other legislative requirements, e.g. travel distances
A case history of a particular project where travel distances were relaxed using impulse ventilation designed for smoke control
An explanation of how this project was validated using CFD and live fire tests
Powder & Bulk Solids Magazine
This document contains summaries of various products and technologies for powder and bulk solids handling. It discusses mercury intrusion porosimeters that can accurately measure pore size distributions and densities. It also mentions a patented bulk bag material conditioner that can return solidified materials to a free-flowing state and a silo weight monitoring and control system that can predict when refills are needed to avoid shutdowns. The document provides brief summaries of these various powder and bulk solids handling products and technologies.
OC Brochure
Weatherford provides completion technologies for offshore wells. They have over 180 engineers with 3600 years of design experience. Their technologies are designed for complex deepwater wells and tested beyond standards to enhance efficiency and production while reducing costs and risks. Their portfolio includes sand screens, packers, safety valves, and monitoring systems that have saved customers millions and eliminated interventions in offshore wells around the world.
BWE conform process (Continuous Rotary Extrusion)
BWE Ltd, formerly Babcock Wire Equipment Ltd, has operated from its Ashford headquarters in the Southeast of England since 1969, when the company first produced cold welding machines. Conform™ machines have been manufactured since 1976 when they were initially used for extruding round wire. Continuous development aimed at extending the capabilities of the Conform process led to an
increasing number of applications including magnet wire, electrical conductors, refrigeration tube and ultimately, in 1984, the introduction of the Conklad™ process for aluminium clad steel wire and CATV and fibre optic cables.
Circular Runway
This document proposes and analyzes the concept of a circular runway for airport operations. Some key points:
- A circular runway could allow aircraft to take off and land in any wind direction and optimize air and ground trajectories. However, it would have a very high construction cost and safety issues in gusty winds.
- For a circular runway to work, it would need a minimum inner radius of 1500 meters for sufficient operations. The total runway length would be around 10,000 meters.
- International standards for runway design, such as width, bank angle, elevation, and sight distance, would need to be considered. Calculations show the circular runway concept could meet these standards.
- A circular runway may
C4959 Case Study - Vac Pump Enclosure
This case study describes the design and construction of an acoustic enclosure for two vacuum pumps and motor sets located outdoors at a manufacturing facility. The 6m x 2.4m x 3m enclosure was manufactured as a single piece for craned installation. It was designed to withstand weather exposure for 15 years, include double access doors and ventilation system, and match the facility's color scheme. The enclosure aims to provide noise control for the pumps and a safe working environment while allowing normal equipment operation.
IRJET- Design, Manufacturing and Testing of Open-Circuit Subsonic Wind Tunnel...
This document provides a comprehensive review of the design, manufacturing, and testing of open-circuit subsonic wind tunnels. It discusses key components like the test section, contraction cone, diffuser, and drive system. For the settling chamber and honeycomb structure, the document recommends a length 5-10 times the diameter to reduce lateral turbulence, and notes hexagonal cells have the lowest pressure drop. It states the contraction ratio should be between 7-12 for optimum performance to eliminate axial flow fluctuations. The document also categorizes wind tunnels as open-circuit or closed-circuit, and describes classifications based on airflow speed like subsonic, transonic, supersonic, and hypersonic.
EPR™, the 1600+ MWe Reactor - 2009 Issue
The document discusses the advantages of the EPR nuclear reactor design from AREVA, highlighting its safety, economic competitiveness, and environmental friendliness. The EPR design builds on decades of nuclear experience and incorporates multiple layers of redundancy and safety systems to prevent core meltdowns. It offers high power output, efficiency, and availability to reduce generation costs compared to gas plants. The EPR also provides operating flexibility and can meet different fuel and power needs while minimizing environmental impact over its lifetime.
All Energy Exhibition & Conference, Glasgow, May 2017
Compressed Air Systems - Are you Blowing Your Profits. Use the Leakshooter LKS1000v3 to save your energy and money.
2015-Sales-Brochure-
Pentair's CapaciSense system provides high temperature clearance and vibration monitoring for industrial turbines. It uses capacitive sensors that can withstand temperatures up to 1400°C/2550°F, allowing the entire engine to be monitored continuously. The system combines blade tip clearance and vibration monitoring from a single sensor. It provides real-time data to optimize efficiency, monitor for potential failures, and prevent blade damage during warm restarts. CapaciSense systems have been in use since the 1980s and are employed worldwide in power generation and aerospace turbines.
Rolomatic
The Roll-O-Matic is a heavy-duty automatic renewable media air filter that requires little maintenance. It uses a spool system to advance high quality filter media evenly so that unfiltered air does not bypass the media. The basic components include an upper dispensing unit that houses the clean media roll, a lower rewind unit for the used media, guide rods and rollers to keep the media flat, and a motor and controls to advance the media automatically.
Testing/Manufacture/ASHRE 52.2 Filter Test Rig
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers these systems for testing filters used in applications like cleanrooms.
Testing/Manufacture/Hepa Filter Drop Tester
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers these systems for testing filters used in applications like cleanrooms.
Testing/Manufacture/Pre & Fine Filter Packaging Test Equipments
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Automotive Hepa Filter Test Rig
FEC provides high quality equipment for testing air filters. Their equipment can test filters according to international standards like EN 779 and ASHRAE 52.2. They offer a variety of filter testing systems that can test parameters like flow rate, differential pressure, dust holding capacity, efficiency, and restriction pressure. Their systems are suitable for testing pocket, cassette, and flat sheet filters of various materials up to 610x610mm in size. FEC also provides specialized equipment for testing HEPA filters, including aerosol generators, particle counters, and leak testers.
Testing/Manufacture/Pre & Fine Filter Testing Equipments
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Testing/Manufacture/Clean Rom Filter Test Rig
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Testing/Manufacture/Hepa Filter 2
FEC provides high quality equipment for testing air filters. Their equipment can test filters according to international standards like EN 779 and ASHRAE 52.2. They offer a variety of filter testing systems that can test parameters like flow rate, differential pressure, dust holding capacity, efficiency, and restriction pressure. Their systems are suitable for testing pocket, cassette, and flat sheet filters of various materials up to 610x610mm in size. FEC also provides specialized equipment for testing HEPA filters, including aerosol generators, particle counters, and leak testers.
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
More Related Content
Similar to Unmanned Aerial Systems
Kaveri engine- Kaveri Engine DRDO
Kaveri engine is an afterburning turbofan project developed by the GTRE, lab under DRDO, India. GTRE is now running two separate successor engine programmes, the K9+ and the K10. Click here to know more about kaveri Engine : http://www.drdo.gov.in/drdo/English/index.jsp?pg=Kaveri.jsp
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...Machine Tool Systems Inc.
Please find attached a case study about the production of probes for measuring speed and temperature in turbo engines. These probes have been invented by the Startup Vetoflow. The formation of the company was supported by the 3D Printing Cluster. A network which was founded by EOS, Strascheg Center for Entrepreneurship and UnternehmerTUM. CPD Presentation: Car Park Ventilation
An explanation of the basic legislative requirements and how these are achieved using impulse ventilation
Application of impulse ventilation, both for carbon monoxide and for smoke clearance or smoke control
The advantages of impulse ventilation over traditional ducted extract systems
Use of CFD
Control systems used: carbon monoxide and heat detection systems
How impulse ventilation can be used to control smoke movement, allowing smoke control to be used, as part of a fire strategy, to compensate for the relaxation of other legislative requirements, e.g. travel distances
A case history of a particular project where travel distances were relaxed using impulse ventilation designed for smoke control
An explanation of how this project was validated using CFD and live fire tests
Powder & Bulk Solids Magazine
This document contains summaries of various products and technologies for powder and bulk solids handling. It discusses mercury intrusion porosimeters that can accurately measure pore size distributions and densities. It also mentions a patented bulk bag material conditioner that can return solidified materials to a free-flowing state and a silo weight monitoring and control system that can predict when refills are needed to avoid shutdowns. The document provides brief summaries of these various powder and bulk solids handling products and technologies.
OC Brochure
Weatherford provides completion technologies for offshore wells. They have over 180 engineers with 3600 years of design experience. Their technologies are designed for complex deepwater wells and tested beyond standards to enhance efficiency and production while reducing costs and risks. Their portfolio includes sand screens, packers, safety valves, and monitoring systems that have saved customers millions and eliminated interventions in offshore wells around the world.
BWE conform process (Continuous Rotary Extrusion)
BWE Ltd, formerly Babcock Wire Equipment Ltd, has operated from its Ashford headquarters in the Southeast of England since 1969, when the company first produced cold welding machines. Conform™ machines have been manufactured since 1976 when they were initially used for extruding round wire. Continuous development aimed at extending the capabilities of the Conform process led to an
increasing number of applications including magnet wire, electrical conductors, refrigeration tube and ultimately, in 1984, the introduction of the Conklad™ process for aluminium clad steel wire and CATV and fibre optic cables.
Circular Runway
This document proposes and analyzes the concept of a circular runway for airport operations. Some key points:
- A circular runway could allow aircraft to take off and land in any wind direction and optimize air and ground trajectories. However, it would have a very high construction cost and safety issues in gusty winds.
- For a circular runway to work, it would need a minimum inner radius of 1500 meters for sufficient operations. The total runway length would be around 10,000 meters.
- International standards for runway design, such as width, bank angle, elevation, and sight distance, would need to be considered. Calculations show the circular runway concept could meet these standards.
- A circular runway may
C4959 Case Study - Vac Pump Enclosure
This case study describes the design and construction of an acoustic enclosure for two vacuum pumps and motor sets located outdoors at a manufacturing facility. The 6m x 2.4m x 3m enclosure was manufactured as a single piece for craned installation. It was designed to withstand weather exposure for 15 years, include double access doors and ventilation system, and match the facility's color scheme. The enclosure aims to provide noise control for the pumps and a safe working environment while allowing normal equipment operation.
IRJET- Design, Manufacturing and Testing of Open-Circuit Subsonic Wind Tunnel...
This document provides a comprehensive review of the design, manufacturing, and testing of open-circuit subsonic wind tunnels. It discusses key components like the test section, contraction cone, diffuser, and drive system. For the settling chamber and honeycomb structure, the document recommends a length 5-10 times the diameter to reduce lateral turbulence, and notes hexagonal cells have the lowest pressure drop. It states the contraction ratio should be between 7-12 for optimum performance to eliminate axial flow fluctuations. The document also categorizes wind tunnels as open-circuit or closed-circuit, and describes classifications based on airflow speed like subsonic, transonic, supersonic, and hypersonic.
EPR™, the 1600+ MWe Reactor - 2009 Issue
The document discusses the advantages of the EPR nuclear reactor design from AREVA, highlighting its safety, economic competitiveness, and environmental friendliness. The EPR design builds on decades of nuclear experience and incorporates multiple layers of redundancy and safety systems to prevent core meltdowns. It offers high power output, efficiency, and availability to reduce generation costs compared to gas plants. The EPR also provides operating flexibility and can meet different fuel and power needs while minimizing environmental impact over its lifetime.
All Energy Exhibition & Conference, Glasgow, May 2017
Compressed Air Systems - Are you Blowing Your Profits. Use the Leakshooter LKS1000v3 to save your energy and money.
2015-Sales-Brochure-
Pentair's CapaciSense system provides high temperature clearance and vibration monitoring for industrial turbines. It uses capacitive sensors that can withstand temperatures up to 1400°C/2550°F, allowing the entire engine to be monitored continuously. The system combines blade tip clearance and vibration monitoring from a single sensor. It provides real-time data to optimize efficiency, monitor for potential failures, and prevent blade damage during warm restarts. CapaciSense systems have been in use since the 1980s and are employed worldwide in power generation and aerospace turbines.
Rolomatic
The Roll-O-Matic is a heavy-duty automatic renewable media air filter that requires little maintenance. It uses a spool system to advance high quality filter media evenly so that unfiltered air does not bypass the media. The basic components include an upper dispensing unit that houses the clean media roll, a lower rewind unit for the used media, guide rods and rollers to keep the media flat, and a motor and controls to advance the media automatically.
Testing/Manufacture/ASHRE 52.2 Filter Test Rig
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers these systems for testing filters used in applications like cleanrooms.
Testing/Manufacture/Hepa Filter Drop Tester
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers these systems for testing filters used in applications like cleanrooms.
Testing/Manufacture/Pre & Fine Filter Packaging Test Equipments
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Automotive Hepa Filter Test Rig
FEC provides high quality equipment for testing air filters. Their equipment can test filters according to international standards like EN 779 and ASHRAE 52.2. They offer a variety of filter testing systems that can test parameters like flow rate, differential pressure, dust holding capacity, efficiency, and restriction pressure. Their systems are suitable for testing pocket, cassette, and flat sheet filters of various materials up to 610x610mm in size. FEC also provides specialized equipment for testing HEPA filters, including aerosol generators, particle counters, and leak testers.
Testing/Manufacture/Pre & Fine Filter Testing Equipments
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Testing/Manufacture/Clean Rom Filter Test Rig
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable systems for testing filters with capacities up to 6,000 cfm.
Testing/Manufacture/Hepa Filter 2
FEC provides high quality equipment for testing air filters. Their equipment can test filters according to international standards like EN 779 and ASHRAE 52.2. They offer a variety of filter testing systems that can test parameters like flow rate, differential pressure, dust holding capacity, efficiency, and restriction pressure. Their systems are suitable for testing pocket, cassette, and flat sheet filters of various materials up to 610x610mm in size. FEC also provides specialized equipment for testing HEPA filters, including aerosol generators, particle counters, and leak testers.
Similar to Unmanned Aerial Systems (20)
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
IRJET- Design, Manufacturing and Testing of Open-Circuit Subsonic Wind Tunnel...
IRJET- Design, Manufacturing and Testing of Open-Circuit Subsonic Wind Tunnel...
All Energy Exhibition & Conference, Glasgow, May 2017
All Energy Exhibition & Conference, Glasgow, May 2017
Testing/Manufacture/Pre & Fine Filter Packaging Test Equipments
Testing/Manufacture/Pre & Fine Filter Packaging Test Equipments
Testing/Manufacture/Pre & Fine Filter Testing Equipments
Testing/Manufacture/Pre & Fine Filter Testing Equipments
Recently uploaded
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Recently uploaded (20)
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Unmanned Aerial Systems
- 1. Data sheet Blower Tunnel Facility Certified testing ranges offer high safety levels and reduced costs The Blower Tunnel and Icing Facility are unique within Europe and widely used by a variety of military and commercial organisations. The facility is comprised of an open-air Wind Tunnel providing capability for the full scale testing of systems, including the simulation of driving rain and icing conditions, it is also a certified range for flare and munitions testing. Benefits provided to customers are reduced lead times, lower costs, high safety levels and the wealth of experience gained as an official testing centre for the Ministry of Defence Customers Examples of work undertaken by the facility include: the testing of telecommunication stations under driving rain conditions, safety of motor vehicle accessories, development of decoy flares aircraft and component icing ejector seat development and catchnet system, wind effects on masts and structures. Construction Open air test centre allows testing of large platforms The blower tunnel comprises of a 3m-diameter tube 13m long which supports a concentric 1.5m diameter inner tube containing the drive motors for the fans. The complete tunnel is supported in a rigid framework and employs a counter-weight system, which permits the tunnel to be raised to provide downstream testing of the system. Additionally the tunnel may be tilted to angles of up to ±7° from the horizontal. Risk reduced systems testing offer project cost reductions
- 2. Capabilities QinetiQ uses a catchnet system allowing aircraft/canopies ejection seats to be safely caught after unrestricted release into the tunnel air streamFour Rolls-Royce Merlin engines drive the four fixed pitch ten blade fans in contra-rotating pairs, each engine capable of producing 1,610 b.h.p. These engines combined with r.p.m. settings and diameter of the exit nozzle; allow the airspeed to be varied over the range 20 to 180m/s. The facility also has a capability to provide instrumentation services for calibration of equipment in-house, should this be required. The system is capable of handling 50 parameters, with up to 16 pages of real time parameter displays. Permanent records of data can be made on CD or floppy disc for subsequent analysis. For further information please contact: Bob Davis Operations Manager QinetiQ Bldg 408 Rm 14 MOD Boscombe Down Salisbury Wiltshire SP4 0JF United Kingdom Tel: +44 (01980) 662218 Fax: +44 (01980) 663415 rmdavis1@qinetiq.com Or Customer Contact Team Reduction of the air stream temperature below ambient can be achieved using liquid nitrogen to cool the air stream and water of the appropriate droplet size is added to form ice on the test subject. The reduction in temperature that can be achieved is up to 30°c depending on airspeed. Tel: +44 (0) 8700 100942 www.QinetiQ.com © Copyright QinetiQ Ltd 2008 QINETIQ/MS/AEG/DS0703338/2 With the rain gun fitted to the blowing nozzle of the tunnel, controlled quantities of water can be introduced into the air steam to simulate wind driven rain.