How To Create The Ubuntu 20 VM Template For VMware AutomationReal Estate
Canonical, the founder of Ubuntu released Ubuntu 20 with emphasized security and high performance. However, building an Ubuntu 20 VM Template that is ready to be used in VMware automation is something that seems complex for admins.
Title: Working Remotely (via SSH) Rocks!
Intro: Consistent & Persistent development environment from any location any client.
"SSH + TMUX + CLI" Rocks!
Nice material about "SSH Tunneling": http://www.slideshare.net/osoco/ssh-tunneling-recipes-10284950
How To Create The Ubuntu 20 VM Template For VMware AutomationReal Estate
Canonical, the founder of Ubuntu released Ubuntu 20 with emphasized security and high performance. However, building an Ubuntu 20 VM Template that is ready to be used in VMware automation is something that seems complex for admins.
Title: Working Remotely (via SSH) Rocks!
Intro: Consistent & Persistent development environment from any location any client.
"SSH + TMUX + CLI" Rocks!
Nice material about "SSH Tunneling": http://www.slideshare.net/osoco/ssh-tunneling-recipes-10284950
Mise en place d'un serveur SMS Open Source sous GAMMUMahamadou Traore
Ce tuto , est ma présentation lors de la formation que j'ai anime au Club Linux et Logiciel libre du Groupe Loko Cote d'Ivoire sur comment deployer un serveur SMS Open source avec le logiciel libre GAMMU.
avant les pre-requis , veuillez vous assurer d'avoir installer LAMP
Bonne lecture
Soal Network Actual & Future Network - ITNSA LKS SMK Tingkat Provinsi NTB 2021I Putu Hariyadi
Soal Network Actual & Future Network untuk lomba Information Technology Network System Administration (ITNSA) pada LKS SMK Tingkat Provinsi NTB tahun 2021
June OpenNTF Webinar - Domino V12 Certification ManagerHoward Greenberg
June OpenNTF Webinar - Domino V12 Certification Manager
Managing SSL certificates in Domino was always a challenge. The certificates had to be created using OpenSSL and then imported into a key ring file using the kyrtool. Both tools were command line based.
Now in V12, HCL has introduced the Certificate Manager. This will greatly simplify the the process of using certificates in Domino. And there are other security enhancements that will be covered in the webinar.
Daniel Nashed, an HCL Lifetime Ambassador, will walk us through the setup and use of the new Domino V12 Certificate Manager. This webinar is a must for any Domino admins (and developers too!)
Protocolos de E-mail (SMTP, POP e IMAP)Paulo Bischof
Apresentação realizada no dia 25/10/2013, sobre os protocolos de e-mail, na disciplina de Redes e Sistemas Distribuídos no Centro Universitário Católica de Santa Catarina.
Mise en place d'un serveur SMS Open Source sous GAMMUMahamadou Traore
Ce tuto , est ma présentation lors de la formation que j'ai anime au Club Linux et Logiciel libre du Groupe Loko Cote d'Ivoire sur comment deployer un serveur SMS Open source avec le logiciel libre GAMMU.
avant les pre-requis , veuillez vous assurer d'avoir installer LAMP
Bonne lecture
Soal Network Actual & Future Network - ITNSA LKS SMK Tingkat Provinsi NTB 2021I Putu Hariyadi
Soal Network Actual & Future Network untuk lomba Information Technology Network System Administration (ITNSA) pada LKS SMK Tingkat Provinsi NTB tahun 2021
June OpenNTF Webinar - Domino V12 Certification ManagerHoward Greenberg
June OpenNTF Webinar - Domino V12 Certification Manager
Managing SSL certificates in Domino was always a challenge. The certificates had to be created using OpenSSL and then imported into a key ring file using the kyrtool. Both tools were command line based.
Now in V12, HCL has introduced the Certificate Manager. This will greatly simplify the the process of using certificates in Domino. And there are other security enhancements that will be covered in the webinar.
Daniel Nashed, an HCL Lifetime Ambassador, will walk us through the setup and use of the new Domino V12 Certificate Manager. This webinar is a must for any Domino admins (and developers too!)
Protocolos de E-mail (SMTP, POP e IMAP)Paulo Bischof
Apresentação realizada no dia 25/10/2013, sobre os protocolos de e-mail, na disciplina de Redes e Sistemas Distribuídos no Centro Universitário Católica de Santa Catarina.
컨테이너를 이용할 때 어려운 것 중에 하나가 네트웍 문제입니다 .
가상 네트웍 환경에서 컨테이너 간의 통신이 어떻게 이루어지는지를 잘 이해하고 있다면 개발과 운영하는데 많은 도움이 됩니다
컨테이너 네트웍을 이해하기 위해서 나름 공을 많이 들였는데요
여전히 부족함을 많이 느끼고 있습니다 혼자 할 수 없는 것들이라는 생각이 들구요 공유해 주시는 내용들에서 배우고 인사이트도 얻고 있습니다
컨테이너 공부를 시작하는 분들.. 그리고 이미 업무로 하고 계신 분들에게도
도움이 될 것 같습니다
즐공 하세요
네이버 클라우드 플랫폼의 init script는 서버 생성 후, 최초 1회 실행되는 스크립트입니다. 해당 스크립트를 서버 생성 후 실행하도록 구성을 하면, 서버 생성 후 추가 설치가 필요한 패키지들을 서버 생성 시에 자동으로 설치되도록 설정이 가능합니다. 해당 init script가 어떻게 동작하는지, 그리고 실무에서 어떻게 적용하여 이 가능한지 설명해드립니다 | 네이버 클라우드 플랫폼의 init script는 서버 생성 후, 최초 1회 실행되는 스크립트입니다. 해당 스크립트를 서버 생성 후 실행하도록 구성을 하면, 서버 생성 후 추가 설치가 필요한 패키지들을 서버 생성 시에 자동으로 설치되도록 설정이 가능합니다. 해당 init script가 어떻게 동작하는지, 그리고 실무에서 어떻게 적용하여 이 가능한지 설명해드립니다
http://www.oss.kr/index.php?mid=oss_information6&category=1371&document_srl=1392
제 1회 공개SW역량프라자 정기기술세미나(6월24일) 발표자료를 올립니다.
세션1 : 리눅스 시스템을 위한 성능 분석
(강사) 국민대학교 이남승 연구원
세션2 : 우분투 환경에서의 임베디드 개발환경 구축 및 애플리케이션 개발
(강사)우분투코리아 강분도 대표
아젠텍 이호민 전임연구원
다음회차에는 더 좋은 주제로 찾아뵙겠습니다.
감사합니다.
AWS 아마존 웹 서비스 책 없이 시작하기 - AWS 유저그룹 엔터프라이즈 모임 발표 20180514 이준구(SDS)AWSKRUG - AWS한국사용자모임
AWS 아마존 웹 서비스 책 없이 시작하기 - 이준구(SDS)
1. 처음 해보는 AWS 인프라 구성
: VPC, Private Subnet, Public Subnet 등 AWS 인프라 구성에 대한 간략한 설명
2. EC2 에 L2 서버 구성하기
: EC2 Computer 환경에 L2 서비스를 위한 서버 팩 설치 내용 설명
2. 목차
• 준비
• 무선 카드 지원 액세스 포인트 모드 여부
• Hostapd 설치 및 설정
• HostAP 실행
2 UBUNTU 데스크탑 AP 만들기
3. 준비
• 망구성
• 준비물
– hostapd를 지원하는 무선랜카드
– hostapd지원 가능 확인 http://w1.fi/hostapd/
– Ubuntu 가 설치된 데스크탑
UBUNTU 데스크탑 AP 만들기
eth0
X.X.X.X
wlan0
DHCP server
192.168.X.X
Client PC
192.168.X.X
br0
Internet
4. 무선 카드 지원 액세스 포인트 모드 여부
1. 터미널 창에 sudo apt-get install iw 명령을 통해 설치한다.
2. 터미널 창에 iw list 입력하여 출력되는 내용이 아래와 같은 내용을 포함하
는지 확인한다.
• 지원하는 드라이버에 AP 가 표시가 되지 않으면 작업을 할수 없다.
root@root:~$ iw list
…
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
…
UBUNTU 데스크탑 AP 만들기
5. Hostapd 설치 및 네트워크 호스트 설정
1. 터미널 창에 sudo apt-get install hostapd 입력 후 설치한다.
2. sudo vi /etc/hostapd/hostapd.conf 실행 후 다음과 같은 내용 입력한다.
driver=nl80211
interface=wlan0
bridge=br0
hw_mode=g
channel=6
ssid=네트워크이름
# Accept all MAC address
macaddr_acl=0
# Shared Key Authentication
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=비밀번호
# Key management algorithms
wpa_key_mgmt=WPA-PSK
# Set cipher suites (encryption algorithms)
# TKIP = Temporal Key Integrity Protocol
# CCMP = AES in Counter mode with CBC-MAC
wpa_pairwise=TKIP
rsn_pairwise=CCMP
UBUNTU 데스크탑 AP 만들기
6. Hostapd 설치 및 네트워크 호스트 설정 (계속)
3. hostapd 파일 편집
터미널에 sudo vi /etc/default/hostapd 입력 후
DAEMON_CONF=“” 부분을 아래와 같이 입력한다.
…
DAEMON_CONF="/etc/hostapd/hostapd.conf"
…
UBUNTU 데스크탑 AP 만들기
7. Network interface 설정
• sudo apt-get install bridge-utils 명령으로 bridge-utils를 설치한다.
• sudo vi /etc/network/interfaces 입력 후 아래와 같이 브릿지 설정을 추
가한다.
(eth0에 대한 설정은 주석처리를 하고, 해당내용을 br0에 설정해준다.)
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
# Setup bridge
auto br0
iface br0 inet static
bridge_ports wlan0 eth0
address 192.168.5.79
netmask 255.255.255.0
network 192.168.5.0
gateway 192.168.5.1
dns-nameservers 39.119.118.231
UBUNTU 데스크탑 AP 만들기
8. Network interface 설정 (계속)
• 터미널에서 sudo brctl show 명령을 통해 브릿지 연결 상태를 알수 있다.
root@root:~$ brctl show
bridge name bridge id STP enabled interfaces
br0 8000.0015c50c9d3d no eth0
8
wlan0
UBUNTU 데스크탑 AP 만들기
9. HostAP 실행
• firewall 설정을 위한 iptables 설치
– sudo apt-get install iptables을 입력하여 iptables를 설치한다.
– sudo iptables -L 명령을 통해 설정 정보를 확인할 수 있다.
root@root:~$ iptables -L
Chain INPUT (policy ACCEPT)
target port opt source destination
Chain FORWARD (policy ACCEPT)
target port opt source destination
ACCEPT all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target port opt source destination
9
UBUNTU 데스크탑 AP 만들기
10. HostAP 실행 (계속)
• HostAP 실행을 위한 쉘 스크립트를 작성한다.
– sudo vi initHostap 을 통해 파일을 만든후 아래와 같이 작성한다.
#!/bin/bash
# network interface setting
ifconfig $1 up 192.168.5.1 netmask 255.255.255.0 # 게이트웨이로 사용할 wlan의 IP를 설정한다.
• ‘./initHostap wlan0 eth0’ 명령을 통해 Hostapd를 실행 시킨다.
10
# enable routing
sysctl -w net.ipv4.ip_forward=1
# enable NAT (set firewall)
iptables --flush
iptables --table nat flush
iptables --delete-chain
iptables --table nat --delete-chain
iptables --table nat --append POSTROUTING --out-interfaces $2 -j MASQUERADE
iptables --append FORWARD --in-interfaces $1 -j ACCEPT
echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward
# hostapd run
/usr/sbin/hostapd -dd /etc/hostapd/hostapd.conf
# stop
iptables -D POSTROUTING -t nat -o $2 -j MASQUERADE
sysctl -w net.ipv4.ip_forward=0
service hostapd stop
UBUNTU 데스크탑 AP 만들기
11. HostAP 실행 (계속)
• 무선네트워크 목록에 Ubuntu 데스크탑에서 설정한 SSID가 나타나면 연결한다.
• 네트워크가 연결된 후, 연결정보를 제대로 가져온 것을 확인 할 수 있다.
11 UBUNTU 데스크탑 AP 만들기