The document provides information on the Series RFII 5.6 K-factor "Royal Flush II" concealed pendent sprinklers, including a general description, design criteria, technical data, installation instructions, and care/maintenance requirements. The sprinklers feature a flat cover plate and separable two-piece assembly to allow installation before and access after ceiling installation. They are intended for use in fire protection systems designed according to NFPA 13 or other applicable standards.
Find useful information about roof ventilation, Quarrix Roofing Accessories, installation instructions, and certification & testing of Quarrix products.
Cashco, headquartered in Ellsworth, Kansas, manufactures a proprietary line of throttling rotary and linear process control valves and sanitary control valves.
The Merlin Microseal from greyhound Chromatography is a microvalve alternative to the conventional silicone rubber septa used in Gas Chromatography (GC). Its unique design gives it high pressure capability and resisance to wear which results in long life and excellent chromatographic performance. The microseal is available for all major GC manufacturer's instruments.
Find useful information about roof ventilation, Quarrix Roofing Accessories, installation instructions, and certification & testing of Quarrix products.
Cashco, headquartered in Ellsworth, Kansas, manufactures a proprietary line of throttling rotary and linear process control valves and sanitary control valves.
The Merlin Microseal from greyhound Chromatography is a microvalve alternative to the conventional silicone rubber septa used in Gas Chromatography (GC). Its unique design gives it high pressure capability and resisance to wear which results in long life and excellent chromatographic performance. The microseal is available for all major GC manufacturer's instruments.
Abtech SX Stainless Steel Enclosures & Junction Boxes
Hazardous Areas, Zones 1 & Zones 2 - ATEX Certified
The Abtech SX range of stainless steel enclosures and junction boxes includes 14 sizes manufactured in either 316 stainless steel or mild steel. Abtech SX hazardous area stainless steel enclosures and junction boxes are available in standard depths of 140, 200 or 300mm and can be fitted with removable cable gland plates and client approved terminals.
Abtech SX range of stainless steel enclosures and junction boxes were specifically designed to meet the rigors of the North Sea and are capable of achieving IP66, IP67 and IP68 ingress protection. SX hazardous area electrical enclosures have passed the Shell/ERA deluge test, devised to test enclosures and electrical equipment that is routinely subjected to ships decks conditions or fire deluge systems for marine and offshore applications.
Abtech SX Stainless Steel Enclosures & Junction Boxes, Features : Wide operating temperature (-70 to +175 degrees Celsius), Ingress protection to IP68 (submersible to 120ft), Fire resistant to IEC331, Corrosion resistant, Hazardous area approved.
Hazardous Area Certified Stainless Steel Enclosures & Junction Boxes : Abtech SX enclosures and junction boxes carry global hazardous area certifications - ATEX EEx'e' to BSEN50019 (Zone 1 & 2), EEX'nA' to BSEN50021 (Zone 2), NEMA 4X (CSA, UL & FM Class 1 Div 2) and GOST.
Fire Resistant Stainless Steel Enclosures & Junction Boxes : Abtech SX enclosures can be upgraded for fire resistance applications when fitted with ceramic terminals meeting the requirement of IEC331 (750 degrees Celsius for 3 hours) and BS6387/1983 (950 degrees Celsius for 3 hours).
Thiết bị tưới bán kính lớn, phù hợp cho tưới các cánh đồng lớn, tưới cây công nghiệp, tưới cánh đồng mía, cánh đồng cỏ, tưới cà phê...
Áp dụng theo phương pháp tưới di chuyển...
Fan air grease filter mist eliminator brochurewww.FanAir.com
Fiberglass Inline Pre-Filters for Blowers. Typically used in Municipal Odor Control Systems, Wet Wells, Lift Stations, Biofilters, Carbon Adsorbers, Decarbonator Systems, Tank Ventilation Systems.
Exotica Valves™ is a Spanish fast-track manufacturer of corrosion-resistant, nickel-alloy valves designed for the petrochemical industry's most demanding services. We design and produce tailor-made high-alloy valves to end-user specifications in exotic alloys and nickel-alloys: 254 SMO, 904L, AL-6XN®, Alloy 20, Duplex, Hastelloy®, Incoloy®, Inconel®, Monel®, Super Duplex, Tantalum®, Titanium, Zirconium, and a full range of Austenitic, Ferritic and Martensitic alloys, on short deliveries of down to 4 weeks.
Isokern Celsius stove system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Concentric type of butterfly valve is widely used for various applications. From Wafer to Lug, Flange, Universal, U section or AWWA types are all upon on request.
Abtech SX Stainless Steel Enclosures & Junction Boxes
Hazardous Areas, Zones 1 & Zones 2 - ATEX Certified
The Abtech SX range of stainless steel enclosures and junction boxes includes 14 sizes manufactured in either 316 stainless steel or mild steel. Abtech SX hazardous area stainless steel enclosures and junction boxes are available in standard depths of 140, 200 or 300mm and can be fitted with removable cable gland plates and client approved terminals.
Abtech SX range of stainless steel enclosures and junction boxes were specifically designed to meet the rigors of the North Sea and are capable of achieving IP66, IP67 and IP68 ingress protection. SX hazardous area electrical enclosures have passed the Shell/ERA deluge test, devised to test enclosures and electrical equipment that is routinely subjected to ships decks conditions or fire deluge systems for marine and offshore applications.
Abtech SX Stainless Steel Enclosures & Junction Boxes, Features : Wide operating temperature (-70 to +175 degrees Celsius), Ingress protection to IP68 (submersible to 120ft), Fire resistant to IEC331, Corrosion resistant, Hazardous area approved.
Hazardous Area Certified Stainless Steel Enclosures & Junction Boxes : Abtech SX enclosures and junction boxes carry global hazardous area certifications - ATEX EEx'e' to BSEN50019 (Zone 1 & 2), EEX'nA' to BSEN50021 (Zone 2), NEMA 4X (CSA, UL & FM Class 1 Div 2) and GOST.
Fire Resistant Stainless Steel Enclosures & Junction Boxes : Abtech SX enclosures can be upgraded for fire resistance applications when fitted with ceramic terminals meeting the requirement of IEC331 (750 degrees Celsius for 3 hours) and BS6387/1983 (950 degrees Celsius for 3 hours).
Thiết bị tưới bán kính lớn, phù hợp cho tưới các cánh đồng lớn, tưới cây công nghiệp, tưới cánh đồng mía, cánh đồng cỏ, tưới cà phê...
Áp dụng theo phương pháp tưới di chuyển...
Fan air grease filter mist eliminator brochurewww.FanAir.com
Fiberglass Inline Pre-Filters for Blowers. Typically used in Municipal Odor Control Systems, Wet Wells, Lift Stations, Biofilters, Carbon Adsorbers, Decarbonator Systems, Tank Ventilation Systems.
Exotica Valves™ is a Spanish fast-track manufacturer of corrosion-resistant, nickel-alloy valves designed for the petrochemical industry's most demanding services. We design and produce tailor-made high-alloy valves to end-user specifications in exotic alloys and nickel-alloys: 254 SMO, 904L, AL-6XN®, Alloy 20, Duplex, Hastelloy®, Incoloy®, Inconel®, Monel®, Super Duplex, Tantalum®, Titanium, Zirconium, and a full range of Austenitic, Ferritic and Martensitic alloys, on short deliveries of down to 4 weeks.
Isokern Celsius stove system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Concentric type of butterfly valve is widely used for various applications. From Wafer to Lug, Flange, Universal, U section or AWWA types are all upon on request.
Cashco manufactures a broad line of throttling rotary and
linear control valves, pressure reducing regulators, and
back pressure regulators in line sizes from 1⁄4 inch to
10 inches and Cv ranges from .002 to 4,406. Models
are available to handle slurries, cryogenic service, and
corrosive fluids; to withstand high temperatures and
pressures; and to maximize the reduction of fugitive
emissions. Contact Cashco for complete product information.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Here is a “Polymer Product Technical Datasheet Template“. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
Optimux globe control valves provide superior performance while permitting easy, fast, and inexpensive maintenance. Unlike diaphragm-operated control valves, the Piston cylinder-actuated OpGL™ provides stiffness, maintains high positioning accuracy control – making for the world’s most efficient and accurately responsive valve.
For more information on TrimTeck OpGL valves in Northern California, contact:
Belilove Company Engineers
21060 Corsair Blvd
Hayward, CA 94545
Phone: (510) 274-1990
Fax: (510) 274-1999
E-mail: sales@belilove.com
MSH PROJECTS MANAGEMENT (UAE) being representative of Marhsal Excelsior USA offering safety valves and Fittings for
LPG Bulk Storage Tanks
LPG Stationary Tanks
LPG Transport Truck Tanks
LPG Bobtail Truck Tanks
LPG ISO Tanks
LPG Small Tanks
LPG Regulators
Marshal Excelsior (USA) currently hold 75% of LPG market of USA against their competitor Rego, Fisher and other brands competitors and the reason is innovation and latest technology which make Marshal Excelsior products more innovative, reliable better performance, better efficiency and much more.
We with Marshal Excelsior USA offering our full support and services to UAE, Middle East and GCC countries LPG markets and we are open to assist you all your technical query to select one of best option for your LPG tanks and Cylinders safety valves, fittings, Regulators and much more
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Ty3531
1. Series RFII — 5.6 K-factor
“Royal Flush II” Concealed Pendent Sprinklers
Quick & Standard Response, Standard Coverage
Page 1 of 4 APRIL 2016 TFP181
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the “INSTALLER
WARNING” that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and
installation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Worldwide
Contacts
www.tyco-fire.com
General
Description
The TYCO Series RFII 5.6 K-factor,
“Royal Flush II” Concealed Pendent
Sprinklers Quick Response (3-mm
bulb) and Standard Response (5-mm
bulb), are decorative sprinklers fea-
turing a flat cover plate designed to
conceal the sprinkler. These sprinklers
are optimal for architecturally sensi-
tive areas such as hotel lobbies, office
buildings, churches, and restaurants.
Each sprinkler includes a Cover Plate/
Retainer Assembly and a Sprinkler/
Support Cup Assembly. The separa-
ble, two-piece assembly design pro-
vides the following benefits:
• Allows installation of the sprinklers
and pressure testing of the fire pro-
tection system prior to installation of
a suspended ceiling or application of
the finish coating to a fixed ceiling.
• Permits the removal of suspended
ceiling panels for access to building
service equipment without having
to first shut down the fire protection
system and remove sprinklers.
• Provides for 1/2 inch (12,7 mm)
of vertical adjustment to allow a
measure of flexibility in determining
the length of fixed piping to cut for
the sprinkler drops.
The Series RFII Sprinklers are shipped
with a Disposable Protective Cap. The
Protective Cap is temporarily removed
during installation and replaced to help
protect the sprinkler during ceiling
installation or finish. The tip of the Pro-
tective Cap can be used to mark the
center of the ceiling hole into plaster
board or ceiling tiles by gently pushing
the ceiling product against the Pro-
tective Cap. When ceiling installa-
tion is complete, the Protective Cap is
removed and the Cover Plate/Retainer
Assembly is installed.
As an option, the Series RFII Standard
Response (5-mm bulb) “Royal Flush II”
Concealed Pendent Sprinklers can be
fitted with a silicone Air and Dust Seal.
(Refer to Figure 5.) The Air and Dust
Seal is intended for sensitive areas
where it is desirable to prevent air and
dust from the area above the ceiling to
pass through the cover plate.
NOTICE
The Series RFII Concealed Pendent
Sprinklers described herein must be
installed and maintained in compliance
with this document and with the appli-
cable standards of the National Fire
Protection Association, in addition to
the standards of any authorities having
jurisdiction. Failure to do so may impair
the performance of these devices.
The owner is responsible for maintain-
ing their fire protection system and
devices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted with
any questions.
Sprinkler
Identification
Number (SIN)
TY3531 — 3 mm bulb
TY3551 — 5 mm bulb
Technical
Data
Sprinkler Approvals
Approvals apply only to the service
conditions indicated in the Design Criteria
section.
• TY3531 (3 mm Bulb) is UL Listed,
C-UL Listed and NYC Approved
(MEA 353-01-E) as Quick Response.
• TY3531 (3 mm Bulb) is VdS Approved
(Certificate No. G4090007).
• TY3531 (3 mm Bulb) is FM and
LPCB Approved (Ref. No. 094a/10)
as Standard Response.
Note: FM and LPCB do not approve
concealed sprinklers for quick
response.
• TY3551 (5 mm Bulb) is UL Listed,
C-UL Listed, FM Approved, LPCB
Approved (Ref. No. 094a/9), and
NYC Approved (MEA 353-01-E) as
Standard Response.
Approvals for Air and Dust Seal
UL and C-UL Listed for use with the RFII
Standard Response Concealed Sprinkler
(TY3551)
Maximum Working Pressure
Maximum 250 psi (17,3 bar) by UL,
C-UL, and NYC
Maximum 175 psi (12,1 bar) by FM, VdS,
and LPCB
Temperature Rating
155°F (68°C) Sprinkler with
139°F (59°C) Plate
200°F (93°C) Sprinkler with
165°F (74°C) Plate
Discharge Coefficient
K= 5.6 GPM/psi1/2 (80,6 LPM/bar1/2)
2. TFP181
Page 2 of 4
Adjustment
1/2 inch (12,7 mm)
Finishes
See the Ordering Procedure section.
Physical Characteristics
Frame �������������������������������������������������������Bronze
Support Cup. . . . . . . . . . . . Chrome Plated Steel
Guide Pins ������������������������������������Stainless Steel
Deflector ���������������������������������������������������Bronze
Compression Screw �����������������������������������Brass
Bulb �������������������������������������������������������������Glass
Cap. . . . . . . . . . . . . . . . . . . . . Bronze or Copper
Sealing Assembly. . Beryllium Nickel w/TEFLON
Cover Plate �������������������������������������������������Brass
Retainer �������������������������������������������������������Brass
Ejection Spring ����������������������������Stainless Steel
Design
Criteria
The TYCO Series RFII 5.6 K-factor,
“Royal Flush II” Concealed Pendent
Sprinklers are intended for fire protec-
tion systems designed in accordance
with the standard installation rules
recognized by the applicable Listing
or Approval agency; for example, UL
Listing is based on NFPA 13 and VdS
Approval is based on the CEA 4001.
For more information on LPCB and VdS
Approvals, contact Tyco Fire Protection
Products at the following office:
Enschede, Netherlands
Telephone: 31-53-428-4444
Fax: 31-53-428-3377
The Series RFII Concealed Pendent
Sprinklers are only listed and approved
with the Series RFII Concealed Cover
Plates having a factory applied finish.
NOTICE
Do not use the Series RFII in applica-
tions where the air pressure above the
ceiling is greater than that below. Down
drafts through the Sprinkler/Support
Cup Assembly can delay sprinkler
operation in a fire situation.
Operation
When exposed to heat from a fire, the
Cover Plate, normally soldered to the
Retainer at three points, falls away to
expose the Sprinkler/Support Cup
Assembly.
The Deflector — supported by the
Guide Pins — then drops down to its
operational position.
The glass bulb contains a fluid that
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass bulb, activating the sprinkler and
allowing water to flow.
Installation
The TYCO Series RFII 5.6 K-factor,
“Royal Flush II” Concealed Pendent
Sprinklers must be installed in accor-
dance with this section.
General Instructions
Do not install any bulb-type sprinkler
if the bulb is cracked or there is a loss
of liquid from the bulb. With the sprin-
kler held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm) for the 155°F (68°C) and 3/32
inch (2,4 mm) for the 200°F (93°C) tem-
perature ratings.
A leak-tight 1/2 inch NPT sprinkler
joint should be obtained by applying a
minimum to maximum torque of 7 to 14
ft.-lbs. (9,5 to 19,0 Nm). Higher levels
of torque can distort the sprinkler Inlet
with consequent leakage or impairment
of the sprinkler.
Do not attempt to compensate for
insufficient adjustment in the Sprinkler
by under- or over-tightening the Sprin-
kler/Support Cup Assembly. Re-adjust
the position of the sprinkler fitting to
suit.
Step 1. Install the sprinkler only in the
pendent position with the center-line
of the sprinkler perpendicular to the
mounting surface.
Step 2. Remove the Protective Cap.
Step 3. With pipe thread sealant
applied to the pipe threads, hand-
tighten the sprinkler into the sprinkler
fitting.
Step 4. Wrench-tighten the sprinkler
using only the RFII Sprinkler Wrench.
(Refer to Figure 3.) Apply the RFII
Sprinkler Wrench to the Sprinkler as
shown in Figure 3.
SPRINKLER/SUPPORT CUP
ASSEMBLY
COVER PLATE/RETAINER
ASSEMBLY
GUIDE
PINS (2)
DEFLECTOR
(DROPPED
POSITION)
COMPRESSION
SCREW
DEFLECTOR
SUPPORT
CUP WITH
ROLL FORMED
THREADS
FRAME
1/2 NPT
CAP
BULB
SEALING
ASSEMBLY
RETAINER
WITH THREAD
DIMPLES
EJECTION
SPRING
SOLDER
TABS (3)
COVER
PLATE
THREAD INTO
SUPPORT
CUP UNTIL
MOUNTING
SURFACE IS
FLUSH WITH
CEILING
FIGURE 1
MODEL RFII CONCEALED SPRINKLER
ASSEMBLY
3. TFP181
Page 3 of 4
A: 3-1/4 inches (82,6 mm) C: 2-3/8 to 2-5/8 inches (60,3 to 66,7 mm)
B: 3/16 inches (4,8 mm) D: 1-3/4 to 2-1/4 inches (44,5 to 57,2 mm)
Step 5. Replace the Protective Cap
by pushing it upwards until it bottoms
out against the Support Cup. (Refer
to Figure 4.) The Protective Cap helps
prevent damage to the Deflector and
Arms during ceiling installation and/or
finish. You can also use the Protective
Cap to locate the center of the clear-
ance hole by gently pushing the ceiling
material up against the center point of
the Protective Cap.
NOTICE
As long as the Protective Cap remains
in place, the system is considered “Out
of Service”.
Step 6. After the ceiling has been
completed with the 2-1/2 inch (63,5
mm) diameter clearance hole and in
preparation for installing the Cover
Plate/Retainer Assembly, remove and
discard the Protective Cap. Verify that
the Deflector moves up and down
freely.
If the Sprinkler is damaged and the
Deflector does not move up and down
freely, replace the entire Sprinkler.
Do not attempt to modify or repair a
damaged sprinkler.
Step 7. When installing an Air and
Dust Seal, refer to Figure 5; otherwise,
proceed to Step 8. To attach the Air
and Dust Seal, verify the angle of the
outside edge of the seal is oriented
according to Figure 5. Start the edge of
the Retainer in the grooved slot of the
Air and Dust Seal and continue around
the retainer until the entire Air and Dust
Seal is engaged.
COVER PLATE
PROFILE DEPTH
DIMENSION B
1/2 (12,7 mm)
THREADED
ADJUSTMENT
D
FACE OF
SPRINKLER
FITTING
MANUFACTURER
PRESET GAP
3/32 (2,4 mm)
FACE
OF CEILING,
RETAINING RING
MOUNTING
SURFACE
SPRINKLER
SUPPORT CUP
ASSEMBLY
CLEARANCE HOLE
DIAMETER
DIMENSION C
DEFLECTOR
IN DROPPED
POSITION
3/16 to 11/16
(4,8 to 17,5 mm)
REFERENCE
COVER PLATE
RETAINER
ASSEMBLY
COVER PLATE
DIAMETER
DIMENSION A
CLEARANCE
HOLE
FRAME
ARM
SUPPORT
CUP
7/8 (23 mm)
SQUARE
ACCEPTS
1/2 SOCKET
DRIVE
ALIGN
ARROWS WITH
FRAME ARMS
FIGURE 2
SERIES CONCEALED SPRINKLER INSTALLATION DIMENSIONS
FIGURE 4
DISPOSABLE PROTECTIVE CAP
FIGURE 3
RFII SPRINKLER WRENCH