Materials
Standard Application:
For hydraulic components:
- In mineral oils or medium with good lubricating
performance
Seal ring: Turcon®T46
Energizer: Turel®NP
Back-up rings: Zurcon®Z60
Material code for the set: T46NP
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
Turcon® AQ-Seal® 5 is the recommended sealing
element for double acting pistons of accumulators and
positioning and holding cylinders for:
- Machine tools
- Presses
- Rolling mills
- Offshore
- Accumulators
- Heavy duty suspension cylinders
It is particularly recommended for heavy duty and large
diameter applications.
Molykote Application References in Power Plants in IndiaProject Sales Corp
This document provides a list of Molykote products and their applications in power plants. It lists several Molykote products including thread paste, antiseize compounds, lubricating paste, assembly paste, 'O' ring compound, anti-friction coatings, zinc coating spray, penetrants, insulating compounds, sealants, chain sprays, greases, and their uses in fasteners, bearings, valves, insulators, pumps, motors and other equipment in applications such as gas turbines, furnaces, and ash handling plants. The document recommends checking product data sheets and contacting the distributor for technical assistance on product suitability.
Molykote Application References in Power Plants - A Project Sales compilationProject Sales Corp
This document provides a list of Molykote products and their applications in power plants, including thread paste for high-temperature bolts and nuts, antiseize compounds for gas turbine fasteners, lubricating paste for furnace bearings, assembly paste for press-fitting components, 'O' ring lubricants, dry lubricants, corrosion protectants, sealants, greases, and more. It is intended as a reference guide for customers and includes example applications and customer references. Technical assistance is available from the distributor for suitability questions.
This document provides a list of Molykote products and their applications in power plants, including thread paste/antiseize for threaded joints exposed to high temperatures, antiseize for gas turbine fasteners, lubricating paste for furnace bush bearings, and assembly paste for press-fitting bearings and flywheels. It also lists greases and sealants for additional applications like pumps, motors, gearboxes, valves, chains, and more. The document recommends checking product data sheets or calling for technical assistance to ensure suitability for each application.
Mechanical Face Seals Design for Differential Pressure Applicationssapparts
The document discusses mechanical seal designs for cutter rollers used in tunnel boring machines (TBMs). Standard seal designs face issues in differential pressure applications, where slurry can dry and cement the seal rings together. This prevents proper rotation. SAP Parts developed a seal with larger O-rings to minimize contact with slurry. Higher pressures also cause standard seals to lock up. SAP Parts' innovative seal balances loads and increases lubrication to prevent failures from thermal and impact stresses. The company tests seal designs on a bench to simulate severe TBM conditions over incremental pressure cycles up to 10 bar differential and validates performance.
Floating seals are seals used for rotating bodies exposed to silt and sand. SAP Parts is one of the leading manufacturers and exporters of Duo Corn Seals, floating seals from India, Germany and USA. We have been working with major OEM and international companies since 2009.
Visit: http://www.sapparts.com/
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
Turcon® AQ-Seal® 5 is the recommended sealing
element for double acting pistons of accumulators and
positioning and holding cylinders for:
- Machine tools
- Presses
- Rolling mills
- Offshore
- Accumulators
- Heavy duty suspension cylinders
It is particularly recommended for heavy duty and large
diameter applications.
Molykote Application References in Power Plants in IndiaProject Sales Corp
This document provides a list of Molykote products and their applications in power plants. It lists several Molykote products including thread paste, antiseize compounds, lubricating paste, assembly paste, 'O' ring compound, anti-friction coatings, zinc coating spray, penetrants, insulating compounds, sealants, chain sprays, greases, and their uses in fasteners, bearings, valves, insulators, pumps, motors and other equipment in applications such as gas turbines, furnaces, and ash handling plants. The document recommends checking product data sheets and contacting the distributor for technical assistance on product suitability.
Molykote Application References in Power Plants - A Project Sales compilationProject Sales Corp
This document provides a list of Molykote products and their applications in power plants, including thread paste for high-temperature bolts and nuts, antiseize compounds for gas turbine fasteners, lubricating paste for furnace bearings, assembly paste for press-fitting components, 'O' ring lubricants, dry lubricants, corrosion protectants, sealants, greases, and more. It is intended as a reference guide for customers and includes example applications and customer references. Technical assistance is available from the distributor for suitability questions.
This document provides a list of Molykote products and their applications in power plants, including thread paste/antiseize for threaded joints exposed to high temperatures, antiseize for gas turbine fasteners, lubricating paste for furnace bush bearings, and assembly paste for press-fitting bearings and flywheels. It also lists greases and sealants for additional applications like pumps, motors, gearboxes, valves, chains, and more. The document recommends checking product data sheets or calling for technical assistance to ensure suitability for each application.
Mechanical Face Seals Design for Differential Pressure Applicationssapparts
The document discusses mechanical seal designs for cutter rollers used in tunnel boring machines (TBMs). Standard seal designs face issues in differential pressure applications, where slurry can dry and cement the seal rings together. This prevents proper rotation. SAP Parts developed a seal with larger O-rings to minimize contact with slurry. Higher pressures also cause standard seals to lock up. SAP Parts' innovative seal balances loads and increases lubrication to prevent failures from thermal and impact stresses. The company tests seal designs on a bench to simulate severe TBM conditions over incremental pressure cycles up to 10 bar differential and validates performance.
Floating seals are seals used for rotating bodies exposed to silt and sand. SAP Parts is one of the leading manufacturers and exporters of Duo Corn Seals, floating seals from India, Germany and USA. We have been working with major OEM and international companies since 2009.
Visit: http://www.sapparts.com/
Mizztech slurry pump profile in EnglishCharles Cheng
Mizztech is a privately owned Chinese company established in 2008 that manufactures mining equipment such as pumps, mills, screens, and hydrocyclones. The company has a production capacity of 1000 sets/4000 tons per year and supplies products domestically and internationally for mining, metallurgy, power, petrochemical, and other industries. Mizztech's key product is its MAH series mining slurry pump, which is interchangeable with Weir Warman pumps and uses proprietary rubber and metal composite materials for its wet end parts.
The CW LSOH Brass Gland Kit is an indoor/outdoor cable gland for securing single-wire-armored cables. It consists of a brass gland, brass earth tag, brass locknut, and silicone shroud. The kit is rated for IP66 protection and operates in temperatures from -20°C to +90°C. It is suitable for cables up to 75mm and made from corrosion-resistant brass alloy.
The document describes a hydraulic boom system rock breaker from Dong Myung TOPA Co., LTD. It has a horizontal reach of 6,000mm and is designed to break oversized material and prevent clogging at crushers. It uses a hydraulic breaker like the T-300 or T-500 to break up large rocks in an efficient and safe way, improving productivity by keeping crushers running at full capacity without downtime from jams. The boom system is built with durable components to withstand heavy use in quarries and mines.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Turcon rod glyd ring t rod t type glyd ring gztwalleseals
Rod T-type glyd rings are sealing rings suitable for high, medium, and low pressure applications with high load and frequency conditions, especially for long stroke applications. They can be used for larger rod diameters in fluids and under high pressure in machines like bulldozers, excavators, forging machines, and more. Standard models use filled PTFE seal rings for light duty and NBR or FKM O-rings for heavy duty. The order number indicates the size and O-ring material. They are compatible with hydraulic oil, anti-flaming oil, water, and other working fluids and conditions.
Piston rod packings are used in double-acting reciprocating compressors to seal the crank-side cylinder around the reciprocating piston rod. They consist of several sealing chambers containing freely floating sealing elements that automatically adjust to wear over time. As the sealing elements wear out, the piston rod packings must be replaced. Proper design, assembly, and maintenance of piston rod packings is necessary to optimize their durability and reliability in sealing compressor cylinders.
This document provides maintenance schedules and lubricant recommendations for equipment used on offshore rigs, jack-ups, lay barges, and dredges. It lists various pieces of equipment and recommends lubricants and maintenance intervals. Lubricants recommended include molybdenum disulfide greases, gear oils, and chain lubricants from Transol's product lines. Maintenance is generally recommended every 150 hours of operation or during equipment movement. Proper lubricant selection depends on the operating temperature range.
We are one of the best rubber bellow mechanical seal manufacturers and suppliers and also We provide the rubber bellows seal with very high mechanical strength.The rubber bellow type mechanical seal are trouble-free to install and very easy to remove.
Mechanical Seal Design For Differential Pressure Applicationssapparts
Mechanical Face Seal offered by SAP Parts for differential pressure applications simulate the application conditions of TBM drum cutters and cutter rollers in demanding test cycles with increased ramp and ramp down cycles on the test bench of the tensile test center and controlled by the computer system Is fully controlled by the pre-test and verification system.
Read more: http://www.sapparts.com/mechanical-face-seal.html
General Purpose Clutches:
- The Ogura Clutch Company is the largest manufacturer of electromagnetic clutches in the world, founded in 1938.
- General purpose clutches typically use a bearing mounted design that can be used in mobile, agricultural, marine or lawn/garden applications.
- They consist of a field/rotor assembly and a pulley/armature assembly that magnetically engage and disengage. Engagement is caused by magnetic attraction between the rotor and armature.
A mechanical seal is a sealing device which forms a running seal between rotating and stationary parts. They were developed to overcome the disadvantages of compression packing. Leakage can be reduced to a level meeting environmental standards of government regulating agencies and maintenance costs can be lower.
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.
The document discusses the Turcon Glyd Ring T, a double-acting O-ring energized slipper seal used in hydraulic cylinders. It has advantages over traditional slipper seals like very good static leak-tightness, increased clearance, and adaptability to operating conditions and fluid types. Applications include injection molding machines, presses, excavators, forklifts, and more. Standard materials include Turcon T46 seal rings and NBR or FKM O-rings. Optional materials allow sealing non-lubricating fluids or surfaces with rougher finishes.
Turbomanufacturer produces a catalogue in 2014 featuring engineered products such as bucket teeth, adapters, and shrouds for construction and mining equipment. The document provides specifications, instructions, and reference charts for a variety of manufacturers including Caterpillar, Komatsu, Doosan, Volvo, and more.
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
Molykote Application References in Power Plants - Project Sales CorpProject Sales Corp
This document provides a list of Molykote products and their applications in power plants, including thread paste/antiseize for threaded joints exposed to high temperatures, antiseize for gas turbine fasteners, lubricating paste for furnace bearings, assembly paste for press-fitting bearings and wheels, 'O' ring compound to extend seal life, anti-friction coatings for valve stems, and various greases for wire ropes, open gears, switches and more. It recommends checking product data sheets for suitability and provides contact information for technical assistance.
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
Mizztech slurry pump profile in EnglishCharles Cheng
Mizztech is a privately owned Chinese company established in 2008 that manufactures mining equipment such as pumps, mills, screens, and hydrocyclones. The company has a production capacity of 1000 sets/4000 tons per year and supplies products domestically and internationally for mining, metallurgy, power, petrochemical, and other industries. Mizztech's key product is its MAH series mining slurry pump, which is interchangeable with Weir Warman pumps and uses proprietary rubber and metal composite materials for its wet end parts.
The CW LSOH Brass Gland Kit is an indoor/outdoor cable gland for securing single-wire-armored cables. It consists of a brass gland, brass earth tag, brass locknut, and silicone shroud. The kit is rated for IP66 protection and operates in temperatures from -20°C to +90°C. It is suitable for cables up to 75mm and made from corrosion-resistant brass alloy.
The document describes a hydraulic boom system rock breaker from Dong Myung TOPA Co., LTD. It has a horizontal reach of 6,000mm and is designed to break oversized material and prevent clogging at crushers. It uses a hydraulic breaker like the T-300 or T-500 to break up large rocks in an efficient and safe way, improving productivity by keeping crushers running at full capacity without downtime from jams. The boom system is built with durable components to withstand heavy use in quarries and mines.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Turcon rod glyd ring t rod t type glyd ring gztwalleseals
Rod T-type glyd rings are sealing rings suitable for high, medium, and low pressure applications with high load and frequency conditions, especially for long stroke applications. They can be used for larger rod diameters in fluids and under high pressure in machines like bulldozers, excavators, forging machines, and more. Standard models use filled PTFE seal rings for light duty and NBR or FKM O-rings for heavy duty. The order number indicates the size and O-ring material. They are compatible with hydraulic oil, anti-flaming oil, water, and other working fluids and conditions.
Piston rod packings are used in double-acting reciprocating compressors to seal the crank-side cylinder around the reciprocating piston rod. They consist of several sealing chambers containing freely floating sealing elements that automatically adjust to wear over time. As the sealing elements wear out, the piston rod packings must be replaced. Proper design, assembly, and maintenance of piston rod packings is necessary to optimize their durability and reliability in sealing compressor cylinders.
This document provides maintenance schedules and lubricant recommendations for equipment used on offshore rigs, jack-ups, lay barges, and dredges. It lists various pieces of equipment and recommends lubricants and maintenance intervals. Lubricants recommended include molybdenum disulfide greases, gear oils, and chain lubricants from Transol's product lines. Maintenance is generally recommended every 150 hours of operation or during equipment movement. Proper lubricant selection depends on the operating temperature range.
We are one of the best rubber bellow mechanical seal manufacturers and suppliers and also We provide the rubber bellows seal with very high mechanical strength.The rubber bellow type mechanical seal are trouble-free to install and very easy to remove.
Mechanical Seal Design For Differential Pressure Applicationssapparts
Mechanical Face Seal offered by SAP Parts for differential pressure applications simulate the application conditions of TBM drum cutters and cutter rollers in demanding test cycles with increased ramp and ramp down cycles on the test bench of the tensile test center and controlled by the computer system Is fully controlled by the pre-test and verification system.
Read more: http://www.sapparts.com/mechanical-face-seal.html
General Purpose Clutches:
- The Ogura Clutch Company is the largest manufacturer of electromagnetic clutches in the world, founded in 1938.
- General purpose clutches typically use a bearing mounted design that can be used in mobile, agricultural, marine or lawn/garden applications.
- They consist of a field/rotor assembly and a pulley/armature assembly that magnetically engage and disengage. Engagement is caused by magnetic attraction between the rotor and armature.
A mechanical seal is a sealing device which forms a running seal between rotating and stationary parts. They were developed to overcome the disadvantages of compression packing. Leakage can be reduced to a level meeting environmental standards of government regulating agencies and maintenance costs can be lower.
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.
The document discusses the Turcon Glyd Ring T, a double-acting O-ring energized slipper seal used in hydraulic cylinders. It has advantages over traditional slipper seals like very good static leak-tightness, increased clearance, and adaptability to operating conditions and fluid types. Applications include injection molding machines, presses, excavators, forklifts, and more. Standard materials include Turcon T46 seal rings and NBR or FKM O-rings. Optional materials allow sealing non-lubricating fluids or surfaces with rougher finishes.
Turbomanufacturer produces a catalogue in 2014 featuring engineered products such as bucket teeth, adapters, and shrouds for construction and mining equipment. The document provides specifications, instructions, and reference charts for a variety of manufacturers including Caterpillar, Komatsu, Doosan, Volvo, and more.
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
Molykote Application References in Power Plants - Project Sales CorpProject Sales Corp
This document provides a list of Molykote products and their applications in power plants, including thread paste/antiseize for threaded joints exposed to high temperatures, antiseize for gas turbine fasteners, lubricating paste for furnace bearings, assembly paste for press-fitting bearings and wheels, 'O' ring compound to extend seal life, anti-friction coatings for valve stems, and various greases for wire ropes, open gears, switches and more. It recommends checking product data sheets for suitability and provides contact information for technical assistance.
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
The document discusses Kurt Hydraulic Clamping Systems, including swing clamp cylinders, swing clamps, link clamps, valves, pumps, and other related products. It provides specifications for the 030 and 040 Series swing clamps, including clamp force ratings, stroke lengths, port sizes, and dimensions. It notes that swing clamp arms must be ordered separately and provides jam nut specifications for the 040 Series threaded body clamps.
Magnum Gate Valve - Worldwide Oilfield Machinewomgroup
The document discusses various gate valves produced by WOM, including their Magnum gate valve, Model 200M gate valve, Magnum mud gate valve, and Magnum line pressure operated surface safety gate valve. It provides information on features such as size ranges, pressure ratings, seal designs, material options, and actuation methods. Diagrams are included to illustrate seal designs.
The document discusses various gate valves produced by WOM, including their Magnum gate valve, Model 200M gate valve, Magnum mud gate valve, and Magnum line pressure operated surface safety gate valve. It provides information on features such as size ranges, pressure ratings, seal designs, material options, and actuation methods. Diagrams are included to illustrate seal designs.
WOM’s Torque Reducer has unique operating mechanism which greatly reduces the operating torque so that the valve can be opened or closed with ease of operation by single person.
Model 200M Gate Valve - Worldwide Oilfield Machinewomgroup
WOM's model 200M Gate Valve model can be equipped with a pneumatic or hydraulic actuator and is ideally suited for manifold and Christmas tree applications.
Magnum Gate Valve with Electric Gear Actuator - WOM Groupwomgroup
WOM leading oilfield company for Magnum Gate Valves with electric gear actuator equipment. Unique bi-directional sealing design provides a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
Magnum Mud Gate Valve, Magnum Mud Gate Valve Manufacturers - WOM Groupwomgroup
WOM's Magnum Mud Gate Valve has a Unique bi-directional sealing design which provides a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
Model 600 Mud Valve, Mud Valves Manufacturers - WOM Groupwomgroup
WOM’s Model 600 Mud Valve features a seat assembly engineered with a “lock shell” design to ensure accurate seat alignment every time the valve is cycled.
Sales7(at)tobeepump.com
Tobee® G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
√ The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
√ Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
√ Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
√ The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components)
√ Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
√ A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps .
Tobee® G/GH Sand Gravel Pumps Applications:
G/GH heavy-duty sand & gravel pump design typically caters for high head high volume duties, The Gravel pumps are best suited to Sand & Gravels, Dredging, Cutter Suction Dredger, Sand Excavation, Coal Washing, Tunnels, Power Plant, Mineral Processing Plants, Higher head cyclone feed or Long distance pipeline duties and Other industries.
Turcon quad ring , x-rings,four lip sealsBanana Yuan
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...Banana Yuan
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...Banana Yuan
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
China turcon Slydring wear ring for pistonBanana Yuan
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
The Zurcon® L-Cup® is a single-acting low-friction seal that provides hydrodynamic back-pumping ability, low friction to reduce heat generation, low breakout force, and very low stick-slip. It has high extrusion resistance, optimal sealing lip geometry for high sealing ability, and no entrapped oil or grease between the seal and groove. The Zurcon® L-Cup® was designed to meet customer demands and is interchangeable with existing U-Cup grooves.
The Indian government has been working over the past few years to include elements of ITS in the transport sector. This standard ensures the optimal operation of the current transport infrastructure. It also increases the efficiency, safety, comfort, and quality of the system. That is why the government created the AIS-140 standard. Compliance with this standard means all vehicles used for public transit must have panic buttons and vehicle tracking modules installed. Nevertheless, in future in the standard protocol of AIS-140 you can expect fare collection and CCTV capabilities.
Get more information here: https://blog.watsoo.com/2023/12/27/all-about-prithvi-ais-140-gps-vehicle-tracker/
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
1. TURCON® CST SEAL
- Double-Acting -
- Elastomer-Energized Turcon® Slipper Seal
Materials
Standard Application:
For hydraulic components:
- In mineral oils or medium with good lubricating
performance
Seal ring: Turcon®T46
Energizer: Turel®NP
Back-up rings: Zurcon®Z60
Material code for the set: T46NP
Advantages
- Simple groove design
- No stick-slip effect when starting for smooth operation
- Minimum static and dynamic coefficient of friction
- Increased clearance possible
- Due to larger extrusion gap, safe use even with soiled
media
- Long service life
Application Examples
The CST Seal is the recommended sealing element for
double-acting pistons of hydraulic cylinders working in very
harsh conditions such as:
- Excavators
- Heavy duty hydraulic cylinders
PK0701000
PK0701063
PK0701125
PK0701188
PK0701250
PK0701313
PK0701375
PK0701438
PK0701500
PK0701563
PK0701625
PK0701688
PK0701750
PK0701813
PK0701875
PK0701938
PK0702000
PK0702125
PK0702250
PK0702375
PK0702500
PK0702625
PK0702750
PK0702875
PK0803000
PK0803125
PK0803250
PK0803375
PK0803500
PK0803625
PK0803750
PK0803875
PK0804000
PK0804125
PK0804250
PK0804375
PK0804500
PK0804625
PK0804750
PK0804875
PK0905000
PK0905125