China Turcon excluder 5
•Download as DOC, PDF•
0 likes•422 views
TURCON EXCLUDER 5 Double-Acting - - O—Ring-Energized Scraper - - Material - - Turcon and Zurcon - Materials The following material combination has proven effective for most applications: Excluder: Turcon T46 O—Ring: NBR, 70 Shore A Set Code: T46N For other applications, other material combinations as listed in Table XIII may also be used.
Report
Share
Report
Share
Recommended
China Turcon excluder 2
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
Double Acting Riveting System June 04
Typical manual tool used for production lines. Can be set up for body shop use. Cycle times are roughly 1 sec per joint.
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...Jacton Electromechanical Co.,Ltd
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Help kit se for remove Implant
The document describes a fixture remover tool that is used to remove failed dental implants or fixture components in 3 steps: 1) Assemble the remover tool and insert it into the failed fixture, 2) Gently rotate the tool to lock it to the fixture, 3) Continue rotating to detach the failed component without damaging surrounding bone. It also includes guides that attach to the fixture at different angles to help repair damaged internal threads.
Micro e systems_hs30_datasheet
The Model HS30 is a high-speed, hollow shaft optical rotary encoder that can accept shaft diameters up to 3/4 inch. It has a resolution of up to 5,000 lines with 5X interpolation for up to 100,000 counts per revolution. Its unique split collar and flexible spring make installation simple. It is ideal for applications requiring high resolution from a hollow shaft encoder.
Flameproof Highproof High Range DP Switch FC series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches, Differential Pressure Switches, Pressure Difference Switches.
CS Unitec Portable Beveling Machine
CS Unitec offers a wide range of beveling and deburring machines to bevel, deburr, and chamfer edges of steel plate, pipes, and heavy parts.
00 flexible drill pipe usr -ultra short radius drilling -
T-type drilling is a type of ultra-short radius drilling that can achieve 90 degree turns over sections as short as 2.1 meters using flexible drill pipe, resembling a "T" shape. It involves setting a whipstock at the planned depth and angle, milling a window, building curves up to the designed angle with flexible drill pipe, and drilling the lateral wellbore to total depth. The first offshore T-type drilling operation successfully drilled 4 lateral bores totaling over 60 meters in length off a parent well in the Weizhou 12-2 oilfield, significantly increasing production from 230 to 1400 barrels of fluid and 85 to 550 barrels of oil.
Recommended
China Turcon excluder 2
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
Double Acting Riveting System June 04
Typical manual tool used for production lines. Can be set up for body shop use. Cycle times are roughly 1 sec per joint.
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...Jacton Electromechanical Co.,Ltd
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Help kit se for remove Implant
The document describes a fixture remover tool that is used to remove failed dental implants or fixture components in 3 steps: 1) Assemble the remover tool and insert it into the failed fixture, 2) Gently rotate the tool to lock it to the fixture, 3) Continue rotating to detach the failed component without damaging surrounding bone. It also includes guides that attach to the fixture at different angles to help repair damaged internal threads.
Micro e systems_hs30_datasheet
The Model HS30 is a high-speed, hollow shaft optical rotary encoder that can accept shaft diameters up to 3/4 inch. It has a resolution of up to 5,000 lines with 5X interpolation for up to 100,000 counts per revolution. Its unique split collar and flexible spring make installation simple. It is ideal for applications requiring high resolution from a hollow shaft encoder.
Flameproof Highproof High Range DP Switch FC series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches, Differential Pressure Switches, Pressure Difference Switches.
CS Unitec Portable Beveling Machine
CS Unitec offers a wide range of beveling and deburring machines to bevel, deburr, and chamfer edges of steel plate, pipes, and heavy parts.
00 flexible drill pipe usr -ultra short radius drilling -
T-type drilling is a type of ultra-short radius drilling that can achieve 90 degree turns over sections as short as 2.1 meters using flexible drill pipe, resembling a "T" shape. It involves setting a whipstock at the planned depth and angle, milling a window, building curves up to the designed angle with flexible drill pipe, and drilling the lateral wellbore to total depth. The first offshore T-type drilling operation successfully drilled 4 lateral bores totaling over 60 meters in length off a parent well in the Weizhou 12-2 oilfield, significantly increasing production from 230 to 1400 barrels of fluid and 85 to 550 barrels of oil.
Turcon glyd ring
Walleseals company can make equivalent products as per trelleborg standard, If you interested in it, please contact email : info@wallesels.com
Turcon glyd ring t
The document discusses the Turcon Glyd Ring T, a double-acting O-ring energized slipper seal used in hydraulic cylinders. It has advantages over traditional slipper seals like very good static leak-tightness, increased clearance, and adaptability to operating conditions and fluid types. Applications include injection molding machines, presses, excavators, forklifts, and more. Standard materials include Turcon T46 seal rings and NBR or FKM O-rings. Optional materials allow sealing non-lubricating fluids or surfaces with rougher finishes.
China Turcon stepseal 2 k
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
Zurcon rimseal
Walleseals company can make equivalent products as per trelleborg standard,
If you interested in it, please contact email : info@walleseals.com
Xrt x ray transmission ore sorter intelligent dry separation-hot mining_serena
The document describes an XRT intelligent dry sorter produced by Beijing Hot Mining Tech Co Ltd. It has the highest precision, can process the largest particle sizes, and is the most stable system. The sorter uses X-ray technology and AI algorithms to sort raw ore, improving ore grades and reducing waste. It has applications in mining a variety of minerals like gold, silver, and copper. The sorter provides benefits like lower processing costs, improved efficiency and profits, and extended mine life.
Turcon glyd ring c
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.
Turcon CST seal
Materials
Standard Application:
For hydraulic components:
- In mineral oils or medium with good lubricating
performance
Seal ring: Turcon®T46
Energizer: Turel®NP
Back-up rings: Zurcon®Z60
Material code for the set: T46NP
China Turcon vl seal
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
PROTESIS REMOVIBLE, RENFERT
The document describes Renfert's sandblasting equipment, including both stationary and mobile units. It provides details on various models ranging from basic single tank units to more advanced multiple tank and automated recycling units. Key features highlighted include efficient venturi mixing chambers, precisely focused blasting, customizable nozzles, color-coded systems, protective glass, lighting, and connections to additional equipment. The Vario Jet automatic recyclable blaster is specifically discussed for its cost-effectiveness through material recycling and ability to blast multiple items simultaneously in both automatic and manual modes.
Wft053728
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
HOT-XRT Intelligent soter.pdf
The document describes an XRT intelligent ore sorter that uses X-ray technology and sensors to identify and separate ore from waste rock. It has the highest precision and can process the largest range of particle sizes of any raw ore sorting equipment. The sorter improves mining efficiency by increasing ore grades, reducing waste, and allowing for recovery from tailings and slag. It has applications in sorting a wide variety of metal and non-metal ores.
Rotosolver II
The Rotosolver II is a high shear mixer developed by Admix to improve on their existing Rotosolver design. It delivers enhanced performance and efficiency through several design improvements:
1. It reduces energy consumption by up to 30% through streamlining and utilizing computational fluid dynamics software during development.
2. It improves dispersion by providing over 115% more mechanical high shear surface area and more than doubling the number of shearing edges.
3. It features an easy-to-clean design with an open mixing chamber to allow for thorough cleaning.
Carten SPDSA Series
This document describes Carten's SPDSA series of ultra-high purity pneumatic diaphragm valves for high purity gas and chemical distribution systems. The SPDSA valves feature stainless steel and PCTFE construction, tied elgiloy diaphragms, and electropolished surfaces for maximum purity. They are assembled and tested in a class 10 cleanroom and double bag packaged with nitrogen for distribution. The document provides specifications on valve sizes, flow rates, pressure ratings, materials of construction, and ordering information.
Antifriction material Raflon
The document describes a new material called "Raflon" which is based on PTFE but has enhanced properties due to irradiation during production. It has very high wear resistance, a low coefficient of friction, wide operating temperature range, and chemical resistance. It is proposed to be used in a variety of applications as an alternative to PTFE, including in pipelines, pumps, valves, compressors, turbines, vehicles, and more due to its durable properties.
T40X3 Panel Mount Industrial Trackball
The document describes the T40X3 industrial trackball which is designed for critical applications requiring high durability, reliability, and performance over wide operating temperatures. It has a 3-inch diameter rollerball and precision components that enable over 100,000 hours of usage. The trackball is sealed to NEMA 12/IP54 standards and has digital output interfaces. It is intended for panel mounting and integration into machine control and industrial computing systems.
Zurcon u cup ru9
Walleseals company can make equivalent products as per trelleborg standard, If you interested in it, please contact email : info@wallesels.com
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Actuat...
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Quarter Turn Actuators: Double Acting & Spring Return Models
P4 - Baterias Recarregaveis - CKD Corporation - AEROTECH.pdf
Equipamento relacionado com baterias recarregáveis Série P4*.
Automação Pneumática Sustentável.
No processo de fabricação secundária, vários requisitos ambientais devem ser atendidos, como prevenção de poeira à prova de explosão, vácuo, ultra-seco e materiais a serem usados.
A CKD responde de forma consistente às necessidades dos clientes para a fabricação de baterias secundárias, desde a produção de eletrodos até a embalagem, com nosso produto visando o processo seguro de produção de baterias secundárias.
Distribuição Exclusiva CKD no Brasil.
Aerodynamic Tehcnology.
Mais info:
11 4177-1010
11 98640-4040
vendas@aerotech.ind.br
www.aerotech.ind.br
Dry ultrafine grinding with agitated ball mill atr (en)
This document discusses dry ultrafine grinding with agitated ball mills. It describes how the Alpine ATR agitated ball mills can produce mineral powders with fineness values up to 95% less than 2 micrometers. An example application achieves 700kg/hour at 90% less than 2 micrometers or 3500kg/hour at 50% less than 2 micrometers for a soft CaCO3 product. The mills can use aluminum oxide or other wear-resistant linings and grinding beads between 2-5mm for maximum energy efficiency.
Brochure Norton Rail track maintenance and repair
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
Turcon quad ring ， x-rings，four lip seals
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon varilip pdr
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
More Related Content
Similar to China Turcon excluder 5
Turcon glyd ring
Walleseals company can make equivalent products as per trelleborg standard, If you interested in it, please contact email : info@wallesels.com
Turcon glyd ring t
The document discusses the Turcon Glyd Ring T, a double-acting O-ring energized slipper seal used in hydraulic cylinders. It has advantages over traditional slipper seals like very good static leak-tightness, increased clearance, and adaptability to operating conditions and fluid types. Applications include injection molding machines, presses, excavators, forklifts, and more. Standard materials include Turcon T46 seal rings and NBR or FKM O-rings. Optional materials allow sealing non-lubricating fluids or surfaces with rougher finishes.
China Turcon stepseal 2 k
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
Zurcon rimseal
Walleseals company can make equivalent products as per trelleborg standard,
If you interested in it, please contact email : info@walleseals.com
Xrt x ray transmission ore sorter intelligent dry separation-hot mining_serena
The document describes an XRT intelligent dry sorter produced by Beijing Hot Mining Tech Co Ltd. It has the highest precision, can process the largest particle sizes, and is the most stable system. The sorter uses X-ray technology and AI algorithms to sort raw ore, improving ore grades and reducing waste. It has applications in mining a variety of minerals like gold, silver, and copper. The sorter provides benefits like lower processing costs, improved efficiency and profits, and extended mine life.
Turcon glyd ring c
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.
Turcon CST seal
Materials
Standard Application:
For hydraulic components:
- In mineral oils or medium with good lubricating
performance
Seal ring: Turcon®T46
Energizer: Turel®NP
Back-up rings: Zurcon®Z60
Material code for the set: T46NP
China Turcon vl seal
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
PROTESIS REMOVIBLE, RENFERT
The document describes Renfert's sandblasting equipment, including both stationary and mobile units. It provides details on various models ranging from basic single tank units to more advanced multiple tank and automated recycling units. Key features highlighted include efficient venturi mixing chambers, precisely focused blasting, customizable nozzles, color-coded systems, protective glass, lighting, and connections to additional equipment. The Vario Jet automatic recyclable blaster is specifically discussed for its cost-effectiveness through material recycling and ability to blast multiple items simultaneously in both automatic and manual modes.
Wft053728
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
HOT-XRT Intelligent soter.pdf
The document describes an XRT intelligent ore sorter that uses X-ray technology and sensors to identify and separate ore from waste rock. It has the highest precision and can process the largest range of particle sizes of any raw ore sorting equipment. The sorter improves mining efficiency by increasing ore grades, reducing waste, and allowing for recovery from tailings and slag. It has applications in sorting a wide variety of metal and non-metal ores.
Rotosolver II
The Rotosolver II is a high shear mixer developed by Admix to improve on their existing Rotosolver design. It delivers enhanced performance and efficiency through several design improvements:
1. It reduces energy consumption by up to 30% through streamlining and utilizing computational fluid dynamics software during development.
2. It improves dispersion by providing over 115% more mechanical high shear surface area and more than doubling the number of shearing edges.
3. It features an easy-to-clean design with an open mixing chamber to allow for thorough cleaning.
Carten SPDSA Series
This document describes Carten's SPDSA series of ultra-high purity pneumatic diaphragm valves for high purity gas and chemical distribution systems. The SPDSA valves feature stainless steel and PCTFE construction, tied elgiloy diaphragms, and electropolished surfaces for maximum purity. They are assembled and tested in a class 10 cleanroom and double bag packaged with nitrogen for distribution. The document provides specifications on valve sizes, flow rates, pressure ratings, materials of construction, and ordering information.
Antifriction material Raflon
The document describes a new material called "Raflon" which is based on PTFE but has enhanced properties due to irradiation during production. It has very high wear resistance, a low coefficient of friction, wide operating temperature range, and chemical resistance. It is proposed to be used in a variety of applications as an alternative to PTFE, including in pipelines, pumps, valves, compressors, turbines, vehicles, and more due to its durable properties.
T40X3 Panel Mount Industrial Trackball
The document describes the T40X3 industrial trackball which is designed for critical applications requiring high durability, reliability, and performance over wide operating temperatures. It has a 3-inch diameter rollerball and precision components that enable over 100,000 hours of usage. The trackball is sealed to NEMA 12/IP54 standards and has digital output interfaces. It is intended for panel mounting and integration into machine control and industrial computing systems.
Zurcon u cup ru9
Walleseals company can make equivalent products as per trelleborg standard, If you interested in it, please contact email : info@wallesels.com
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Actuat...
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Quarter Turn Actuators: Double Acting & Spring Return Models
P4 - Baterias Recarregaveis - CKD Corporation - AEROTECH.pdf
Equipamento relacionado com baterias recarregáveis Série P4*.
Automação Pneumática Sustentável.
No processo de fabricação secundária, vários requisitos ambientais devem ser atendidos, como prevenção de poeira à prova de explosão, vácuo, ultra-seco e materiais a serem usados.
A CKD responde de forma consistente às necessidades dos clientes para a fabricação de baterias secundárias, desde a produção de eletrodos até a embalagem, com nosso produto visando o processo seguro de produção de baterias secundárias.
Distribuição Exclusiva CKD no Brasil.
Aerodynamic Tehcnology.
Mais info:
11 4177-1010
11 98640-4040
vendas@aerotech.ind.br
www.aerotech.ind.br
Dry ultrafine grinding with agitated ball mill atr (en)
This document discusses dry ultrafine grinding with agitated ball mills. It describes how the Alpine ATR agitated ball mills can produce mineral powders with fineness values up to 95% less than 2 micrometers. An example application achieves 700kg/hour at 90% less than 2 micrometers or 3500kg/hour at 50% less than 2 micrometers for a soft CaCO3 product. The mills can use aluminum oxide or other wear-resistant linings and grinding beads between 2-5mm for maximum energy efficiency.
Brochure Norton Rail track maintenance and repair
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
Similar to China Turcon excluder 5 (20)
Xrt x ray transmission ore sorter intelligent dry separation-hot mining_serena
Xrt x ray transmission ore sorter intelligent dry separation-hot mining_serena
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Actuat...
Installation, Operation & Maintenance Instructions for Kinetrol Rotary Actuat...
P4 - Baterias Recarregaveis - CKD Corporation - AEROTECH.pdf
P4 - Baterias Recarregaveis - CKD Corporation - AEROTECH.pdf
Dry ultrafine grinding with agitated ball mill atr (en)
Dry ultrafine grinding with agitated ball mill atr (en)
More from Banana Yuan
Turcon quad ring ， x-rings，four lip seals
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon varilip pdr
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
CNG NGV fuel nozzel lip seals
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Cfw oil seal merkel rotary shaft seal-dichtomatik-nok shaft seal-skf oil seal...
Cfw oil seal,TC oil seals, SC shaft seals,merkel rotary shaft seal,dichtomatik-nok shaft sea,-skf oil seal,fkm oil seal,EPDM oil seal
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
China Zurcon slydring
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
China Turcite slydring wear ring
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
China turcon Slydring wear ring for piston
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
China Turcon Slydring for rod
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
China turcon HiMod slydring
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
China Turcon Scraper WSA
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
China Scraper WRM
SCRAPER WRM
Single-Acting -- Material -- NBR Elastomer
Materials
Standard application:
Nitrile elastomer NBR 90 Shore A
Material code: N9
China Zurcon scraper WKE
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
China ZURCON SCRAPER DA 24
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
China TURCON VARISEAL M2
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
China POLYPAC - VEEPAC CH/G1
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
China Polypac selemaster dsm
POLYPAC® - SELEMASTER DSM
- Double-Acting - - Combined Seal and Wear Ring -
- Material :
- NBR + Fiber-Reinforced NBR + POM
China COMPACT SEAL D A S TYPE A/B
China COMPACT SEAL D A S TYPE A/B
Double-Acting -
- Combined Seal and Wear Ring -
- Material -
- NBR, Polyester Elastomer + POM
China Zurcon wynseal
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
More from Banana Yuan (20)
Cfw oil seal merkel rotary shaft seal-dichtomatik-nok shaft seal-skf oil seal...
Cfw oil seal merkel rotary shaft seal-dichtomatik-nok shaft seal-skf oil seal...
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...
Recently uploaded
1比1复刻澳洲皇家墨尔本理工大学毕业证本科学位原版一模一样
原版一模一样【微信：741003700 】【澳洲皇家墨尔本理工大学毕业证本科学位】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(Greenwich文凭证书)格林威治大学毕业证如何办理
毕业原版【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
出售假学位证【微信:176555708】【(UAL毕业证书)伦敦艺术大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UMich毕业证)密歇根大学|安娜堡分校毕业证如何办理
UMich硕士学位证成绩单【微信95270640】做UMich文凭、办UMich文凭、买UMich文凭Q微信95270640买办国外文凭UMich毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UMich学历文凭、UMich假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
[留学文凭学历认证(留信认证使馆认证)密歇根大学|安娜堡分校毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理密歇根大学|安娜堡分校密歇根大学|安娜堡分校毕业证假文凭信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。听话天天呆在小屋里除了看书写作业就是睡觉看电视屋里很黑很闷白天也得开灯开风扇山娃不想浪费电总将小方桌搁在门口看书写作业有一次山娃坐在门口写作业写着写着竟伏在桌上睡着了迷迷糊糊中山娃似乎听到了父亲的脚步声当他晃晃悠悠站起来时才诧然发现一位衣衫破旧的妇女挎着一只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——喜
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证如何办理
IIT本科学位证成绩单【微信95270640】（伊利诺伊理工大学毕业证成绩单本科学历）Q微信95270640(补办IIT学位文凭证书)伊利诺伊理工大学留信网学历认证怎么办理伊利诺伊理工大学毕业证成绩单精仿本科学位证书硕士文凭证书认证Seneca College diplomaoffer,Transcript办理硕士学位证书造假伊利诺伊理工大学假文凭学位证书制作IIT本科毕业证书硕士学位证书精仿伊利诺伊理工大学学历认证成绩单修改制作，办理真实认证、留信认证、使馆公证、购买成绩单，购买假文凭，购买假学位证，制造假国外大学文凭、毕业公证、毕业证明书、录取通知书、Offer、在读证明、雅思托福成绩单、假文凭、假毕业证、请假条、国际驾照、网上存档可查！
办国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1伊利诺伊理工大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗衣服为父母喂饭送汤按摩酸痛的腰背握着父母的手扶着他们一步一步地慢慢散步.让我们间
加急办理美国南加州大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【美国南加州大学毕业证文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(Birmingham文凭证书)伯明翰大学|学院毕业证快速办理
加急购买全套证件文凭【微信:176555708】【(Birmingham毕业证书)伯明翰大学|学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Westminster文凭证书)威斯敏斯特大学毕业证快速办理
加急购买办理毕业证【微信:176555708】【(Westminster毕业证书)威斯敏斯特大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Why is the AIS 140 standard Mandatory in India?
The Indian government has been working over the past few years to include elements of ITS in the transport sector. This standard ensures the optimal operation of the current transport infrastructure. It also increases the efficiency, safety, comfort, and quality of the system. That is why the government created the AIS-140 standard. Compliance with this standard means all vehicles used for public transit must have panic buttons and vehicle tracking modules installed. Nevertheless, in future in the standard protocol of AIS-140 you can expect fare collection and CCTV capabilities.
Get more information here: https://blog.watsoo.com/2023/12/27/all-about-prithvi-ais-140-gps-vehicle-tracker/
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
毕业原版【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Monash文凭证书)莫纳什大学毕业证如何办理
毕业原版【微信:176555708】【(Monash毕业证书)莫纳什大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UST文凭证书)圣托马斯大学毕业证快速办理
精仿办理本科毕业证【微信:176555708】【(UST毕业证书)圣托马斯大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UOL文凭证书)利物浦大学毕业证如何办理
毕业原版【微信:176555708】【(UOL毕业证书)利物浦大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
LORRAINE ANDREI_LEQUIGAN_GOOGLE CALENDAR
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
按照学校原版(AU文凭证书)英国阿伯丁大学毕业证快速办理
出售毕业典礼【微信:176555708】【(AU毕业证书)英国阿伯丁大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(KCL文凭证书)伦敦国王学院毕业证如何办理
毕业原版【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(TheAuckland毕业证书)新西兰奥克兰大学毕业证如何办理
原版定制新西兰奥克兰大学毕业证【微信：176555708】【TheAuckland毕业证书成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
按照学校原版(USD文凭证书)圣地亚哥大学毕业证快速办理
官方原版办理成绩单ps【微信:176555708】【(USD毕业证书)圣地亚哥大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Production.pptxd dddddddddddddddddddddddddddddddddd
Production.pptxd dddddddddddddddddddddddddddddddddd
China Turcon excluder 5
- 1. TURCON EXCLUDER 5 Double-Acting - - O—Ring-Energized Scraper - - Material - - Turcon and Zurcon - Materials The following material combination has proven effective for most applications: Excluder: Turcon T46 O—Ring: NBR, 70 Shore A Set Code: T46N For other applications, other material combinations as listed in Table XIII may also be used. Advantages - Outstanding sliding properties - Stick-slip-free (Turcon material) - Tough scraper for heavy-duty operation - Can compensate for deflections of the piston rod or plunger - Very good scraping effect even against firmly adhered dirt, etc. - Very good scraping effect from the inside against the residual oil film adhering to the surface of the piston rod - Very high resistance to hydraulic media - Available for all diameters up to 102.000 inches (2,600 mm) (Turcon), up to 86.000 inches (2,200 mm) (Zurcon) Technical Data Velocity: 50 ft/s (15 m/s) for Turcon materials 6.5 ft/s (2 m/s) for Zurcon materials Temperature: -49°F to +392°F (-45°C to +200°C) (Turcon) -49°F to +212°F (-45°C to +100°C) (Zurcon) (depending on O—Ring material) Media: Mineral oil-based hydraulic fluids, flame retardant hydraulic fluids, environmentally safe hydraulic fluids (bio-oils), water, air and others, depending on the scraper and O—Ring material
- 2. Installation Dimensions / TSS Part No. WEE101500 WEE101563 WEE101625 WEE101687 WEE101750 WEE101812 WEE101875 WEE101938 WEE102000 WEE102125 WEE102250 WEE102375 WEE102500 WEE102625 WEE202750 WEE202875 WEE203000 WEE203125 WEE203250 WEE203375 WEE203500 WEE203625 WEE203750 WEE203875 WEE204000 WEE204125 WEE204250 WEE204375 WEE204500 WEE204625 WEE204750 WEE204875 WEE205000 WEE205125 WEE205250 WEE205375 WEE305500 WEE305625 WEE305750 WEE306000 WEE306250 WEE306500
- 3. WEE306750 WEE307000 WEE307250 WEE307500 WEE307750 WEE308000 WEE308250 WEE308500 WEE308750 WEE309000 WEE309250 WEE309500 WEE309750 WEE310000 WEE310500 WEE311000 WEE311500 WEE312000 WEE312500 WEE313000 WEE313500 WEE314000 WEE314500 WEE315000 WEE315500 WEE416000 WEE416500 WEE417000 WEE417500 WEE418000 WEE418500 WEE419000 WEE419500 WEE420000 The content comes from www.walleseals.com . For more details, please refer to our website.