Trinity fact sheet
•
0 likes•76 views
The Trinity luminaire is the smallest, lightest, and brightest passively cooled commercial high bay lighting solution available. It uses exclusive graphite foam technology to provide superior thermal management without heavy aluminum heat sinks, allowing it to have minimal weight and downsized components. The heart of the luminaire is a patented LED module with 28 high-power LEDs that weighs less than 6 pounds but delivers over 10,800 lumens. The luminaire has customizable optics and intelligent control options.
Report
Share
Report
Share
Download to read offline
Recommended
LED BASIC TRAINING
This document provides an overview of LED lighting technologies and their advantages over traditional lighting sources. It discusses the basic components and types of LED lights including downlights, panels, flood lights, and portable lights. It provides detailed comparisons of LEDs to incandescent, fluorescent, compact fluorescent, and metal halide lights in terms of energy efficiency, lifespan, environmental impact, light quality, and other factors. Specification sheets and their proper use in recommending LEDs are also covered.
Le ds are better than incandescent & cfl bulbs
LED bulbs are more efficient than incandescent and CFL bulbs, producing light using 90% less energy. LEDs have a microchip that illuminates tiny light sources called LEDs emitting visible light spectrum. They also have a built-in heat sink to keep energy use and heat dissipation low. LEDs are directional light sources unlike other bulbs, making them more energy efficient. Replacing old lights with LEDs can significantly reduce household energy costs and greenhouse gas emissions.
Tips for energy conservation
The document compares different lighting options for energy conservation. It states that compact fluorescent light bulbs (CFLs) use 75% less energy than incandescent bulbs, last 10 times longer, and are less expensive over the long run. Light emitting diodes (LEDs) use even less energy than CFLs and can last over 50,000 hours. The document also provides tips for optimizing air conditioner usage and reducing energy use from computers, laptops, and other office electronics through practices like using sleep mode and switching off monitors when not in use.
LED Lights VS. Incandescent Lights VS. CFLs
LEDs, or light–emitting diodes, are semiconductor devices that produce visible light when an electrical current is passed through them. LEDs are a type of Solid State Lighting (SSL). LED lighting differs from incandescent and compact fluorescent lighting in several ways. When designed well, LED lighting can be more efficient, durable, versatile and longer lasting.This presentation compares the three common types of bulbs on the market today: LED, Incandescent and Compact Fluorescents (CFLs). For more about LED lighting and our LED energy savings programs for businesses in the Caribbean, visit http://www.reelcaribbeanenergy.com.
Comparing LEDs and CFLs
This presentation compares LED and CFL light bulbs across 5 categories: Efficacy, Lifetime, Environment/Human Health, Robustness, Electricity.
NRDC_lighting_handout_101713
This document compares different types of light bulbs and their costs over time. It shows that while traditional incandescent bulbs are cheaper initially, LED bulbs are more cost effective in the long run due to their longer lifespan and lower energy use. Specifically, the table provided calculates that over a 10 year period, an LED bulb that costs $13 upfront but lasts 23 years would only cost $1.34 per year to operate, resulting in total costs of $26.40 over 10 years - much less than the $85.15 it would cost to use traditional incandescent bulbs that last only 1 year over the same time period. The document also explains the new light bulb labels and standards that make it easier
Cfl vs led vs incandescent light bulbs savings comparison
Cfl vs led vs incandescent light bulbs savings comparison,led bulb,led downlight,led tracklight,led panel,led tube,led ceiling lamp,led mr16 gu10,lumens,wattage,color temperature,ip rate
Types of lights
This document introduces different types of indoor and outdoor light bulbs and their key characteristics. It defines terms like watt, lumens, lux, efficiency and efficacy. For indoor lighting, it describes traditional incandescent bulbs as well as more efficient CFL and LED bulbs. Outdoor lighting discussed includes halogen, metal halide, sodium and LED street lamps. Newer LED options like PCA and NBA lamps are highlighted as being efficient with good color rendition.
Recommended
LED BASIC TRAINING
This document provides an overview of LED lighting technologies and their advantages over traditional lighting sources. It discusses the basic components and types of LED lights including downlights, panels, flood lights, and portable lights. It provides detailed comparisons of LEDs to incandescent, fluorescent, compact fluorescent, and metal halide lights in terms of energy efficiency, lifespan, environmental impact, light quality, and other factors. Specification sheets and their proper use in recommending LEDs are also covered.
Le ds are better than incandescent & cfl bulbs
LED bulbs are more efficient than incandescent and CFL bulbs, producing light using 90% less energy. LEDs have a microchip that illuminates tiny light sources called LEDs emitting visible light spectrum. They also have a built-in heat sink to keep energy use and heat dissipation low. LEDs are directional light sources unlike other bulbs, making them more energy efficient. Replacing old lights with LEDs can significantly reduce household energy costs and greenhouse gas emissions.
Tips for energy conservation
The document compares different lighting options for energy conservation. It states that compact fluorescent light bulbs (CFLs) use 75% less energy than incandescent bulbs, last 10 times longer, and are less expensive over the long run. Light emitting diodes (LEDs) use even less energy than CFLs and can last over 50,000 hours. The document also provides tips for optimizing air conditioner usage and reducing energy use from computers, laptops, and other office electronics through practices like using sleep mode and switching off monitors when not in use.
LED Lights VS. Incandescent Lights VS. CFLs
LEDs, or light–emitting diodes, are semiconductor devices that produce visible light when an electrical current is passed through them. LEDs are a type of Solid State Lighting (SSL). LED lighting differs from incandescent and compact fluorescent lighting in several ways. When designed well, LED lighting can be more efficient, durable, versatile and longer lasting.This presentation compares the three common types of bulbs on the market today: LED, Incandescent and Compact Fluorescents (CFLs). For more about LED lighting and our LED energy savings programs for businesses in the Caribbean, visit http://www.reelcaribbeanenergy.com.
Comparing LEDs and CFLs
This presentation compares LED and CFL light bulbs across 5 categories: Efficacy, Lifetime, Environment/Human Health, Robustness, Electricity.
NRDC_lighting_handout_101713
This document compares different types of light bulbs and their costs over time. It shows that while traditional incandescent bulbs are cheaper initially, LED bulbs are more cost effective in the long run due to their longer lifespan and lower energy use. Specifically, the table provided calculates that over a 10 year period, an LED bulb that costs $13 upfront but lasts 23 years would only cost $1.34 per year to operate, resulting in total costs of $26.40 over 10 years - much less than the $85.15 it would cost to use traditional incandescent bulbs that last only 1 year over the same time period. The document also explains the new light bulb labels and standards that make it easier
Cfl vs led vs incandescent light bulbs savings comparison
Cfl vs led vs incandescent light bulbs savings comparison,led bulb,led downlight,led tracklight,led panel,led tube,led ceiling lamp,led mr16 gu10,lumens,wattage,color temperature,ip rate
Types of lights
This document introduces different types of indoor and outdoor light bulbs and their key characteristics. It defines terms like watt, lumens, lux, efficiency and efficacy. For indoor lighting, it describes traditional incandescent bulbs as well as more efficient CFL and LED bulbs. Outdoor lighting discussed includes halogen, metal halide, sodium and LED street lamps. Newer LED options like PCA and NBA lamps are highlighted as being efficient with good color rendition.
GE LED Plug-in 2Pin - Product Presentation
This document provides an overview and marketing information for GE's new LED Plug-In 2Pin lamp. The lamp is a 10.5W LED replacement for 13W, 18W, and 26W CFL plug-in downlights. It provides energy savings of up to 60% over CFLs and a longer rated life of 50,000 hours. The lamp has a universal G24d base and beam angle of 110x120 degrees for horizontal installation. The document outlines the product's value proposition including efficiency, light quality and lifetime. It also provides details on technical specifications, available colors and marketing materials.
Solatube Presentation
Powerpoint presentation showing the techinical aspects of Solatube tubular daylights and the many benefits.
Energy Efficient Lighting and EISA
The Energy Independence and Security Act (EISA) of 2007 aims to increase energy efficiency and security in the United States. Key provisions include increased fuel economy standards, a renewable fuel standard, and new appliance and lighting efficiency standards. The lighting standards phase in between 2011-2014 and require more efficient incandescent and fluorescent lamps. The standards do not ban incandescent lamps but set minimum efficiency levels. Utility programs must now use more stringent EISA baselines to calculate energy savings from efficient lighting upgrades.
CFL Memo
Compact fluorescent light bulbs (CFLs) are more energy efficient than incandescent bulbs, using only one-third the energy to produce the same amount of light. Widespread adoption of CFLs could save Americans $24 billion per year in energy costs and reduce household greenhouse gas emissions by up to 10%. While CFLs contain small amounts of mercury, their increased use would actually decrease overall mercury emissions from coal-fired power plants. Light emitting diodes are another efficient alternative that use 75% less energy than incandescents and last 25 times longer.
Eco friendly product
eco friendly product
and the product is CFL bulb which helps environment cleen and reduse the level of Co2
LED v Fluorescent - all you need to know
This document compares the key characteristics of fluorescent and LED lighting technologies. LED lights use solid state semiconductor materials to produce light, while fluorescent lights use gas-filled tubes. LED lights provide energy savings of up to 60% compared to conventional lighting, have dimming capabilities without a special ballast, longer lifetimes of 100,000 hours or more, and produce light instantly without a warm-up period. Fluorescent lights have lower lumen per watt efficiency and shorter lifetimes of 6,000 to 45,000 hours, require a special ballast for dimming, contain low levels of mercury, and have warm-up periods of a couple minutes.
GE LED Lamps - Portfolio presentation
This document provides information on GE's LED lamp portfolio, including current and upcoming products. It discusses the GE LED Filament GLS A60 & GLOBE G80 lamps that are currently available, and the Bright Stik range extension, LED Glass, and Bright Stik E14 lamps that will be available soon. It also summarizes new LED GU10 Precise, GU10 Energy Smart, and GU10 Start lamps, including specifications and availability dates. Upcoming NPIs for Q2 2017 that are mentioned include the LED ECO Snowcone and additional GU10 Start lamps.
Lighting jargon de mystified - bluff your way in lighting with this simple gu...
The document provides definitions for various lighting terms and jargon. It explains terms like ballast, Breeam rating, candela, CFL, efficacy, fluorescent lights, halogen light, HID, incandescent, induction lighting, IP rating, kelvin, LED, lumen, and metal halide. Each term is concisely defined in a sentence or two to give the reader a high-level understanding of common lighting industry terminology.
LED PRESENTATION
The document discusses the history and advantages of LED lighting technology. It provides details on the LED chip, Target Solutions' full range of LED products including panel lights, downlights, bulbs, flood lighting, and specialty lighting. The document also presents a case study on the benefits and cost savings of replacing metal halide floodlights with LED floodlights for a building.
GE LED Plug in 4-pin_2017 Sept
The document compares the GEN1 and GEN2 versions of GE's LED Plug-In 4Pin lamp. GEN2 features a single design for horizontal use, offers two wattage options (10W and 7.5W) with higher lumen output and efficiency up to 120Lm/W. It has an improved design that replaces more CFL lamp types and comes in a hanging box packaging. Marketing materials for GEN2 include the Spectrum catalogue, website highlights page, and datasheet.
Led filament bulb LED Vintage Filament Bulb supplier
Gento Lighting CO., LTD is an enterprise specializing in developing and supplying LED filament bulbs, which are fantastic for atmospheric lighting, in a multi-bulb pendant light, as well as discreet lighting.
These decorative bulbs are popular in restaurants, lobbies, coffee shops, or even old dinners, antique light bulbs have made a huge resurgence over the last few decades. That’s right, the warm glow of a vintage reproduction incandescent now comes in energy efficient, Edison, Victorian, globe,chandelier styles.
Lumisphere
This document summarizes Lumisphere's low voltage display lighting options, including xenon festoon lights, LED festoon lights, retrofit LED options, and bespoke lighting systems. It provides details on LED festoon options that offer durability, versatility, long life up to 50,000 hours, flexibility, and low maintenance. Ultra-high brightness LED options and the Lumisphere X24 festoon system are also highlighted, noting flexibility and anticipated life of 20,000 hours. An energy comparison chart shows the Orbical 360/8 chip LED and X24 8.5W options use less energy annually than current lighting options.
Guide to buy energy efficienct bulbs
Consumer Federation of America and Consumers Union are releasing a simple guide to help consumers understand the new lighting choices they will have under the new light bulb law taking effect January 1, 2012. While a serious matter, the guide is entitled: How Many Tips Does it Take to Change a Light Bulb?, the two page guide provides 8 tips to selecting a new light bulb simpler.
Energy-efficient Lighting
This presentation explains how to improve energy efficiency in lighting systems. It was prepared for energy auditor training in Nepal in the context of GIZ/NEEP programme. For further information go to EEC webpage: http://www.eec-fncci.org
Prismatic Skylights, Industrial Lighting
Prismatic Skylights:
Norikool™ Prismatic Skylight is a Double/Triple glazing Daylighting system, delivers exceptional daylight with minimal heat transfer. It can replace Strip/Roof lights in Pre-engineered Metal Buildings.
• Less than 2% of Roof area for Daylighting
• Reduced Energy Consumption (For 9 to 10 hrs. in a day)
• High impact UV Resistance
• Zero maintenance
Batik Tugas Saras
Dokumen tersebut membahas tentang batik klasik, termasuk pengertian, bahan dan alat, cara pembuatan, serta makna motif batik klasik. Batik klasik adalah batik tradisional dimana setiap motifnya memiliki makna tertentu. Proses pembuatan batik klasik meliputi proses pembuatan pola, pewarnaan, hingga penghilangan lilin. Motif-motif batik klasik seperti Parang Barong dan Lintang Trenggono masing-masing
How Fabric is Made
The document provides information on the process of transforming fibers into yarn and fabric. It discusses the different types of natural and man-made fibers and how they are classified. The key steps of transforming fibers into yarn are described, including blending, carding, drafting, and spinning. Common spinning techniques like ring spinning and melt extrusion for polyester are explained. The document also covers processes after yarn formation like warping, sizing, and weaving. Different types of looms and weaving patterns are defined. Fabric properties are calculated using example specifications.
Taller Metropolitano 2016. ESQUICIO#1
Este documento presenta las directrices para un taller de arquitectura sobre el análisis y representación de pabellones modernos. El objetivo es que los estudiantes aprendan a analizar obras arquitectónicas a través de la observación, el dibujo y la maqueta. Se analizarán cuatro pabellones paradigmáticos del siglo XX, incluyendo el Pabellón de Barcelona de Mies van der Rohe. Luego, los estudiantes introducirán pequeñas transformaciones y desarrollarán una maqueta colectiva del entorno de
Ccv
This document discusses four scenarios for how urban shopping areas may change by 2030 based on evolving consumer behavior.
The four scenarios are: 1) "Home as a shop" where consumers do most shopping from home using smart devices; 2) "Fast & easy" focuses on quick, personalized shopping experiences; 3) "Fun @ home" involves social online shopping and interaction; and 4) "Experience city" prioritizes unique in-person experiences in cities.
Key takeaways are that retail is transforming, city centers still have potential if they develop unique identities, consumer behavior will dictate the future, and collaboration across stakeholders is essential to co-create the cities and communities of tomorrow.
Der Osterhasen-Check
Die christliche Initiative Romero hat Osterhasen darauf geprüft, wie die bei der Produktion Umwelt und Arbeitsbedingungen Rechnung getragen wird. Die Ergebnisse.
cv salam
This curriculum vitae provides information about Abdus Salam Monu Miah, including his contact details, date of birth, education history, work experience, skills, and interests. He has worked as a Technician at Unipex Dairy Products Co. LTD since 2003 where he is responsible for operating various machines in their feed mill and premix plant. He currently lives in Sharjah, United Arab Emirates and is married with Bangladeshi nationality.
More Related Content
What's hot
GE LED Plug-in 2Pin - Product Presentation
This document provides an overview and marketing information for GE's new LED Plug-In 2Pin lamp. The lamp is a 10.5W LED replacement for 13W, 18W, and 26W CFL plug-in downlights. It provides energy savings of up to 60% over CFLs and a longer rated life of 50,000 hours. The lamp has a universal G24d base and beam angle of 110x120 degrees for horizontal installation. The document outlines the product's value proposition including efficiency, light quality and lifetime. It also provides details on technical specifications, available colors and marketing materials.
Solatube Presentation
Powerpoint presentation showing the techinical aspects of Solatube tubular daylights and the many benefits.
Energy Efficient Lighting and EISA
The Energy Independence and Security Act (EISA) of 2007 aims to increase energy efficiency and security in the United States. Key provisions include increased fuel economy standards, a renewable fuel standard, and new appliance and lighting efficiency standards. The lighting standards phase in between 2011-2014 and require more efficient incandescent and fluorescent lamps. The standards do not ban incandescent lamps but set minimum efficiency levels. Utility programs must now use more stringent EISA baselines to calculate energy savings from efficient lighting upgrades.
CFL Memo
Compact fluorescent light bulbs (CFLs) are more energy efficient than incandescent bulbs, using only one-third the energy to produce the same amount of light. Widespread adoption of CFLs could save Americans $24 billion per year in energy costs and reduce household greenhouse gas emissions by up to 10%. While CFLs contain small amounts of mercury, their increased use would actually decrease overall mercury emissions from coal-fired power plants. Light emitting diodes are another efficient alternative that use 75% less energy than incandescents and last 25 times longer.
Eco friendly product
eco friendly product
and the product is CFL bulb which helps environment cleen and reduse the level of Co2
LED v Fluorescent - all you need to know
This document compares the key characteristics of fluorescent and LED lighting technologies. LED lights use solid state semiconductor materials to produce light, while fluorescent lights use gas-filled tubes. LED lights provide energy savings of up to 60% compared to conventional lighting, have dimming capabilities without a special ballast, longer lifetimes of 100,000 hours or more, and produce light instantly without a warm-up period. Fluorescent lights have lower lumen per watt efficiency and shorter lifetimes of 6,000 to 45,000 hours, require a special ballast for dimming, contain low levels of mercury, and have warm-up periods of a couple minutes.
GE LED Lamps - Portfolio presentation
This document provides information on GE's LED lamp portfolio, including current and upcoming products. It discusses the GE LED Filament GLS A60 & GLOBE G80 lamps that are currently available, and the Bright Stik range extension, LED Glass, and Bright Stik E14 lamps that will be available soon. It also summarizes new LED GU10 Precise, GU10 Energy Smart, and GU10 Start lamps, including specifications and availability dates. Upcoming NPIs for Q2 2017 that are mentioned include the LED ECO Snowcone and additional GU10 Start lamps.
Lighting jargon de mystified - bluff your way in lighting with this simple gu...
The document provides definitions for various lighting terms and jargon. It explains terms like ballast, Breeam rating, candela, CFL, efficacy, fluorescent lights, halogen light, HID, incandescent, induction lighting, IP rating, kelvin, LED, lumen, and metal halide. Each term is concisely defined in a sentence or two to give the reader a high-level understanding of common lighting industry terminology.
LED PRESENTATION
The document discusses the history and advantages of LED lighting technology. It provides details on the LED chip, Target Solutions' full range of LED products including panel lights, downlights, bulbs, flood lighting, and specialty lighting. The document also presents a case study on the benefits and cost savings of replacing metal halide floodlights with LED floodlights for a building.
GE LED Plug in 4-pin_2017 Sept
The document compares the GEN1 and GEN2 versions of GE's LED Plug-In 4Pin lamp. GEN2 features a single design for horizontal use, offers two wattage options (10W and 7.5W) with higher lumen output and efficiency up to 120Lm/W. It has an improved design that replaces more CFL lamp types and comes in a hanging box packaging. Marketing materials for GEN2 include the Spectrum catalogue, website highlights page, and datasheet.
Led filament bulb LED Vintage Filament Bulb supplier
Gento Lighting CO., LTD is an enterprise specializing in developing and supplying LED filament bulbs, which are fantastic for atmospheric lighting, in a multi-bulb pendant light, as well as discreet lighting.
These decorative bulbs are popular in restaurants, lobbies, coffee shops, or even old dinners, antique light bulbs have made a huge resurgence over the last few decades. That’s right, the warm glow of a vintage reproduction incandescent now comes in energy efficient, Edison, Victorian, globe,chandelier styles.
Lumisphere
This document summarizes Lumisphere's low voltage display lighting options, including xenon festoon lights, LED festoon lights, retrofit LED options, and bespoke lighting systems. It provides details on LED festoon options that offer durability, versatility, long life up to 50,000 hours, flexibility, and low maintenance. Ultra-high brightness LED options and the Lumisphere X24 festoon system are also highlighted, noting flexibility and anticipated life of 20,000 hours. An energy comparison chart shows the Orbical 360/8 chip LED and X24 8.5W options use less energy annually than current lighting options.
Guide to buy energy efficienct bulbs
Consumer Federation of America and Consumers Union are releasing a simple guide to help consumers understand the new lighting choices they will have under the new light bulb law taking effect January 1, 2012. While a serious matter, the guide is entitled: How Many Tips Does it Take to Change a Light Bulb?, the two page guide provides 8 tips to selecting a new light bulb simpler.
Energy-efficient Lighting
This presentation explains how to improve energy efficiency in lighting systems. It was prepared for energy auditor training in Nepal in the context of GIZ/NEEP programme. For further information go to EEC webpage: http://www.eec-fncci.org
Prismatic Skylights, Industrial Lighting
Prismatic Skylights:
Norikool™ Prismatic Skylight is a Double/Triple glazing Daylighting system, delivers exceptional daylight with minimal heat transfer. It can replace Strip/Roof lights in Pre-engineered Metal Buildings.
• Less than 2% of Roof area for Daylighting
• Reduced Energy Consumption (For 9 to 10 hrs. in a day)
• High impact UV Resistance
• Zero maintenance
What's hot (15)
Lighting jargon de mystified - bluff your way in lighting with this simple gu...
Lighting jargon de mystified - bluff your way in lighting with this simple gu...
Led filament bulb LED Vintage Filament Bulb supplier
Led filament bulb LED Vintage Filament Bulb supplier
Viewers also liked
Batik Tugas Saras
Dokumen tersebut membahas tentang batik klasik, termasuk pengertian, bahan dan alat, cara pembuatan, serta makna motif batik klasik. Batik klasik adalah batik tradisional dimana setiap motifnya memiliki makna tertentu. Proses pembuatan batik klasik meliputi proses pembuatan pola, pewarnaan, hingga penghilangan lilin. Motif-motif batik klasik seperti Parang Barong dan Lintang Trenggono masing-masing
How Fabric is Made
The document provides information on the process of transforming fibers into yarn and fabric. It discusses the different types of natural and man-made fibers and how they are classified. The key steps of transforming fibers into yarn are described, including blending, carding, drafting, and spinning. Common spinning techniques like ring spinning and melt extrusion for polyester are explained. The document also covers processes after yarn formation like warping, sizing, and weaving. Different types of looms and weaving patterns are defined. Fabric properties are calculated using example specifications.
Taller Metropolitano 2016. ESQUICIO#1
Este documento presenta las directrices para un taller de arquitectura sobre el análisis y representación de pabellones modernos. El objetivo es que los estudiantes aprendan a analizar obras arquitectónicas a través de la observación, el dibujo y la maqueta. Se analizarán cuatro pabellones paradigmáticos del siglo XX, incluyendo el Pabellón de Barcelona de Mies van der Rohe. Luego, los estudiantes introducirán pequeñas transformaciones y desarrollarán una maqueta colectiva del entorno de
Ccv
This document discusses four scenarios for how urban shopping areas may change by 2030 based on evolving consumer behavior.
The four scenarios are: 1) "Home as a shop" where consumers do most shopping from home using smart devices; 2) "Fast & easy" focuses on quick, personalized shopping experiences; 3) "Fun @ home" involves social online shopping and interaction; and 4) "Experience city" prioritizes unique in-person experiences in cities.
Key takeaways are that retail is transforming, city centers still have potential if they develop unique identities, consumer behavior will dictate the future, and collaboration across stakeholders is essential to co-create the cities and communities of tomorrow.
Der Osterhasen-Check
Die christliche Initiative Romero hat Osterhasen darauf geprüft, wie die bei der Produktion Umwelt und Arbeitsbedingungen Rechnung getragen wird. Die Ergebnisse.
cv salam
This curriculum vitae provides information about Abdus Salam Monu Miah, including his contact details, date of birth, education history, work experience, skills, and interests. He has worked as a Technician at Unipex Dairy Products Co. LTD since 2003 where he is responsible for operating various machines in their feed mill and premix plant. He currently lives in Sharjah, United Arab Emirates and is married with Bangladeshi nationality.
Autores multimodalidades
A lista contém 8 nomes de pessoas: Ana Elisa Ribeiro, Carla Coscarelli, Benedito Bezerra, Antônio Carlos Xavier, Roxane Rojo, Júlio Araújo, Nukácia Araújo e Luiz F. Gomes.
Literature Review on Social Networking in Supply chain
This document provides a literature review on social networking in supply chains. It begins with an introduction discussing how social media influences purchase decisions and how products gain popularity through social influence. The objective is to reduce uncertainty and delay to maximize profit and utility. The literature review then summarizes several academic papers from 2008-2016 addressing topics like influence maximization in networks, learning to coordinate in social networks, competing over networks, and using social networks to optimize demand forecasting and pricing. References are provided at the end.
Viewers also liked (9)
Literature Review on Social Networking in Supply chain
Literature Review on Social Networking in Supply chain
Similar to Trinity fact sheet
Lumad Technology Catalogue 2016
The document is a 2016-2017 LED lighting catalogue from LUMAD Technology Pty Ltd, an Australian LED lighting manufacturer. It introduces LUMAD's company profile and commitment to quality. It then provides product specifications for various LED lighting fixtures, including Ultra-Bay high bays, Ultra-Lite high bays, Ultra-Quad high bays, Ultra-Slim architectural flood lights, and Ultra-Power flood lights. Technical details like power, lumen output, beam angle, and dimensions are provided for each product series.
Designing an LED Fresnel Fixture from the Ground Up
Litepanels designed LED Fresnel fixtures from the ground up to address key differences from traditional tungsten Fresnel fixtures. LEDs require tighter temperature control for color and lifespan compared to tungsten bulbs. Litepanels uses active cooling like heat sinks and fans rather than passive cooling to manage LED heat efficiently. Composite and aluminum materials allow lighter-weight designs compared to metal housings used for tungsten fixtures. Acrylic lenses provide improved optical performance over glass with less color artifacts and weight. Rigorous binning and testing ensures LEDs meet specifications for consistent, high-quality color rendering.
Cs meyda tiffany 080501
The historic Stanley Center for the Arts in Utica, NY underwent a $20 million renovation which included installing the world's largest LED chandelier, measuring 35 feet wide, 17 feet tall and weighing 6,500 pounds. The chandelier is illuminated by 160 Philips Lumileds LUXEON K2 LEDs, which provide as much light as 75 65-watt halogen bulbs but use 75% less electricity. An engineering company designed a custom solution to power and dim the LEDs using the theater's existing magnetic dimming system. The LED chandelier provides major energy savings compared to the halogen option, and is expected to last 50 years without needing new lamps.
Philips case study MeydaTiffany
The world's largest LED chandelier illuminates a historic theater in New York. The 35 foot wide chandelier holds 160 LEDs that produce as much light as 75 halogen bulbs but use 75% less electricity. An engineering company designed a custom solution to mount and power the LEDs, overcoming doubts that such a large fixture could be lit with LEDs. The chandelier saves over 90% on electricity costs compared to halogen bulbs and is expected to last 50 years without replacing bulbs.
EnviroTech Lighting Product Brochure - Fluorescent, Induction, LED, Sensors
EnviroTech Lighting supplies Energy Efficient Fluorescent, Induction and LED Fixtures and Retrofits. EnviroTech products are designed as a value engineered solution for Commercial and Industrial businesses. We offer solutions for Warehouse, Office, Parking Garage/Lot lighting applications.
Sunlight leds 2013
This document provides information on outdoor LED lighting products from Sunlight Pakistan. It describes LED lights that use Cree XPE chips and Lutec Germany drivers with die-cast aluminum bodies. The lights have IP protection ratings and operate for five years. Models include wall lights, pole lights, and flood lights in various wattages and chip/driver configurations.
5 hi bay fixture
ENERGY EFFICIENT LED HIGHBAY LAMP
Taskwell's ultra efficient LED High Bay lamp, provides longer life and
reduced maintenance, whilst also providing the many additional benefits
of LED lighting, ie zero UV ray emition, lower thermal radiation and
reduced eletromagnetic interference. Suitable for a multitude of
applications, our LED highbay lamp also improves ambiance by increasing
color rendering, similar to natural day-light, and therefore also increases
working efficiency,as well as work safety.
Ls catalog thiet bi tu dong led eng_dienhathe.vn
LS Industrial Systems presents its LED lighting products, including indoor and outdoor LED lights. The document provides details on various LED lighting models for downlights, lamps, MR16 lights, bulbs, and tubes. It explains the features and specifications of the products such as long lifetime, high efficiency, dimming control, and heat dissipation characteristics. The LED lights can replace conventional lighting such as incandescent, halogen, fluorescent and provide energy savings.
Ls catalog thiet bi tu dong led eng
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
Catalog Biến Tần LS, Catalog Biến Tần,
Catalog Inverter LS, Catalog Inveter,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
LED Streetlight
Advantage of LED Street light with ‘ALG Engine’
Lowest Power consumption compared to other products (nearly half of other LED lights)
Our patented ‘Cooling Fin system’ guarantees the LED lights quality over the life span of 50,000 hours as the patented technology keeps cooling the LED lights system most efficiently no matter how the surrounding temperature soars up.
It retains almost same luminosity even when it lights the ground of up to ,say, 12m apart from the light source while the luminosity of most of other makers tend to decrease drastically when the LED street lights illuminates the ground of such a distance.
The life span is approx. 50,000 hours, which is monumentally big difference from others on the markets.
Its weight is very light, almost one-third less than the others, as the casing is made of polycarbonate material instead of die-casting that most of other makers are using. Thus it makes the installation work easy and so much, the installation cost could be lowered.
It is designed to be very rugged and strong to any external impacts
It is designed to secure perfect water-proof.
With such technical superiority and advantages, it does have unrivaled price competitiveness.
ECOLIGHT LED gaismas ķermeņi un to risinājumi
Ecolight Lighting Factory produces industrial and commercial LED lighting solutions. It employs a no-nonsense approach focused on high performance lighting without unnecessary design features. Ecolight offers efficient, long-lasting luminaires at competitive prices. The company uses state-of-the-art LED technologies to manufacture products for various industrial and commercial applications, making high-quality lighting accessible globally. It has a wide product portfolio that includes high bays, low bays, street lights, and more.
UL Indoor Lighting Catalogue from SeniorLED, China
SeniorLED brings its growing catalogue of UL indoor LED lighting for businesses and organizations. The brand new UL indoor lighting catalogue includes product information and details of LED panel lights, emergency lights, CCT tunable panel lights, ABS LED troffers, High bay lights, magnetic LED strips, LED T8 tubes, LED UFO lights, and Corn lights. Go through the UL indoor LED lighting portfolio to pick the best LED lighting solutions for your business. SeniorLED has been in the LED lighting business for over a decade and also has an extensive catalogue of CE indoor and outdoor LED lights. Email at info@seniorled.com to inquire about UL indoor LED lighting.
backmatrix catalog english
The document summarizes three LED module product lines from BackMatrix for lighting large areas: BackMatrix 49 Pro, BackMatrix 49 Tunable White, and BackMatrix 49.
The BackMatrix 49 Pro provides the highest brightness of up to 37,500 lumens per square meter. It has an onboard brightness setting with 3 levels and uses high-performance Nichia 757 LEDs. The BackMatrix 49 Tunable White allows adjusting the color temperature from warm to cold white for human-centric lighting. BackMatrix 49 is a cost-effective solution for illuminating large surfaces using Nichia LEDs with 180-degree viewing angle.
Taskwell Australia
This document summarizes LED replacement lamps for incandescent and fluorescent lamps. It describes the lamps' features such as simple design, high CRI rating, thermal conductivity, and certifications. Applications include department stores, restaurants, meeting rooms, and hotels. Specifications include input voltage, power output, lumens, beam angle, lifespan, and dimensions. Cautions are provided for safe installation and use.
Led panel case study
LED Panels - The latest generation of energy saving technology. LED panel’s fits perfectly in a suspended ceiling or can even be suspended using straining wire. LED Panels are an ideal replacement for 4 way fluorescent tube fittings, 2 way fluorescent PL-L fittings and standard T8 batten fittings. LED panels could save you over 50% compared to conventional lighting and no money is wasted on maintenance costs.
Light engines
Unibox creates modular LED light engines for linear luminaires and retail displays. Their light engine range includes eco-friendly and high-density options with various LED configurations. Their latest development, Twin Peaks, houses 3000K and 4000K diodes to display gold and silver products together. Unibox's sister company Lumenal specializes in custom LED lighting solutions.
Modular led light engine range
Unibox creates modular LED light engines for linear luminaires and retail displays. Their light engine range includes eco-friendly and high-density options with various LED configurations. Their latest development, Twin Peaks, houses 3000K and 4000K diodes to display gold and silver products together. Unibox's sister company Lumenal specializes in custom LED lighting solutions.
Ledlux Mini Broucher
This document provides information about LED lighting products from Ledlux, including bulbs, tubes, downlights, spotlights, and ceiling lights. It describes the features and specifications of each product such as power, lumen output, LED type, and input voltage. It also provides details about Ledlux as a company, stating that their products are designed in Korea and made in PRC and that they are committed to creating high-efficiency and energy-saving lighting solutions.
Luminous-LED-Lighting-RR-Signature-By-RR-Kabel
Explore RR Kabel's RR Signature Lighting range, featuring innovative and aesthetically pleasing designer and LED lighting solutions. Our extensive collection is crafted to reflect individual styles and emotions, perfect for adding a personal touch to your home decor. Illuminate your spaces with our advanced technology and elegant designs to create a warm, inviting atmosphere. Discover more about our premium lighting products designed to enhance the beauty of your home.
GE LED Lamps 2017 Sept
GE Lighting EMEA introduces several new LED lamp products including an updated Bright Stik GEN3, new ECO Snowcone GEN2, and Start Deco GEN3. The Bright Stik receives a bronze award from IDEA and features higher lumen output and new packaging. The ECO Snowcone and Start Deco also receive design updates and new SKUs. GE LED lamps offer various replacement options for GLS, deco, GU10, and MR16 lamps at competitive price points with quality, reliability, and long lifetimes.
Similar to Trinity fact sheet (20)
Designing an LED Fresnel Fixture from the Ground Up
Designing an LED Fresnel Fixture from the Ground Up
EnviroTech Lighting Product Brochure - Fluorescent, Induction, LED, Sensors
EnviroTech Lighting Product Brochure - Fluorescent, Induction, LED, Sensors
UL Indoor Lighting Catalogue from SeniorLED, China
UL Indoor Lighting Catalogue from SeniorLED, China
Trinity fact sheet
- 1. TRINITY FACT SHEET LED North America Thermal Foam High Bay Luminaire The Trinity luminaire is the smallest, lightest, and brightest passively cooled commercial high bay lighting solution available. Employing our exclusive licensed graphite foam technology, we have been able to design this luminaire to deliver superior thermal management without the traditional heavy aluminum heat sinks used by other manufacturers. This allows us to eliminate most of the weight and downsize internal components. The heart of the luminaire is our patented‐pending LED module. This module is comprised of a small LED board popu‐ lated with 28 High Power Cree XML LEDs, our graphite foam, and a flared pinned heat sink. The weight of this module is less than 6 pounds, yet delivers an astounding 10,800+ target lumens. Based on customer requirement, we can customize this fixture with 1, 2 or 3 modules. Product Features 10,866 lumens 122 watts 89 lm/w 5582 K 69 5” x 5” x 7” 100‐277 Vac 23°/56°/71° 6 pounds 10 years ETL, UL8750 Damp location rated This luminaire is a new product being developed by LED North America, as such, all data contained in this fact sheet is preliminary in nature and could change upon product development. This product is fully made/assembled in the USA. 1020 Commerce Park Drive, Ste. A Oak Ridge, TN. 37830 865.481.3600 - Phone 865-483-0800 - Fax Graphite Foam extended component life Customized optics Intelligent Control options Motion Sensor Dimmable Zone functionality Wide operation temperature range (‐30°C to +50°C) suitable for all ambient conditions Lumen Output Input Power (Watts) Efficacy (lm/w) Color Temperature (CCT) Color Rendering Index (CRI) Dimensions Voltage Input Beam Angle Weight Warranty Certification Environment