TORSIONAL VIBRATIONS.ppt
•Download as PPT, PDF•
5 likes•20 views
This document discusses free torsional vibrations in multi-rotor systems. It first analyzes a two-rotor system, then expands the analysis to a three-rotor system. It also introduces the concept of a torsionally equivalent shaft to simplify the modeling of complex multi-rotor systems.
Report
Share
Report
Share
Recommended
DYNAMICS OF MACHINES.ppt
Dynamic force analysis – Inertia force and Inertia torque– D Alembert’s principle –Dynamic Analysis in reciprocating engines – Gas forces – Inertia effect of connecting rod– Bearing loads – Crank shaft torque
GOVERNOR .ppt
Governors – Types – Centrifugal governors – Gravity controlled and spring controlled centrifugal governors – Characteristics – Effect of friction – Controlling force curves. Gyroscopes –Gyroscopic forces and torques – Gyroscopic stabilization
UNIT-I Turning Moment.ppt
1) Turning moment diagrams graphically represent the torque required at different crank angles in engines. They are used to analyze torque fluctuations and the role of the flywheel in maintaining uniform rotational speed.
2) Flywheels absorb energy when the engine produces excess torque and release energy when engine torque is insufficient, helping maintain constant rotational speed despite cyclic torque variations. Their moment of inertia determines how effectively they can reduce speed fluctuations.
3) Flywheel design involves calculating torque and energy fluctuations from turning moment diagrams and sizing the flywheel to restrict speed changes to within acceptable limits, considering factors like material strength and maximum permissible diameter.
FORCED VIBRATION.ppt
This document describes forced vibrations of mechanical systems with damping. It provides examples of calculating the amplitude of forced vibrations, natural frequency, stiffness required for vibration isolation, and speed at resonance for systems with masses, springs, and dampers driven by periodic forces. Examples determine properties like amplitude, natural frequency, stiffness, and transmitted force for engines, machines, and masses mounted on springs with reciprocating or rotating unbalanced parts. Calculations are shown for systems at different speeds, including resonance.
FREE VIBRATION.ppt
Basic features of vibratory systems – Degrees of freedom – single degree of freedom – Free vibration – Equations of motion – Natural frequency
BALANCING OF ROTATING MASSES.ppt
1. The document discusses balancing of rotating masses by counteracting centrifugal forces with balancing masses. It covers balancing a single mass with a single mass in the same plane, and with two masses in different planes.
2. Balancing a single mass with two masses in different planes requires satisfying conditions of zero net force and zero net couple on the shaft for dynamic balancing.
3. Balancing multiple masses rotating in the same plane involves constructing force and couple polygons to determine balancing masses and their positions to achieve complete balance.
Forced vibration-.pptx
Response of one degree freedom systems to periodic forcing – Harmonic disturbances –Disturbance caused by unbalance – Support motion –transmissibility – Vibration isolation vibration measurement.
BALANCING OF RECIPROCATING MASSES.ppt
The document discusses balancing of reciprocating masses in engines. It explains that reciprocating parts produce both a shaking force and shaking couple due to varying inertia forces during the engine cycle. The purpose of balancing is to eliminate these effects and reduce vibrations. It describes how balancing masses are used to partially balance primary forces in engines with multiple cylinders arranged in a line. The maximum unbalanced primary and secondary forces and couples are calculated for a example 5 cylinder engine, and it is determined that these peak when the third crank is at 45 degrees position.
Recommended
DYNAMICS OF MACHINES.ppt
Dynamic force analysis – Inertia force and Inertia torque– D Alembert’s principle –Dynamic Analysis in reciprocating engines – Gas forces – Inertia effect of connecting rod– Bearing loads – Crank shaft torque
GOVERNOR .ppt
Governors – Types – Centrifugal governors – Gravity controlled and spring controlled centrifugal governors – Characteristics – Effect of friction – Controlling force curves. Gyroscopes –Gyroscopic forces and torques – Gyroscopic stabilization
UNIT-I Turning Moment.ppt
1) Turning moment diagrams graphically represent the torque required at different crank angles in engines. They are used to analyze torque fluctuations and the role of the flywheel in maintaining uniform rotational speed.
2) Flywheels absorb energy when the engine produces excess torque and release energy when engine torque is insufficient, helping maintain constant rotational speed despite cyclic torque variations. Their moment of inertia determines how effectively they can reduce speed fluctuations.
3) Flywheel design involves calculating torque and energy fluctuations from turning moment diagrams and sizing the flywheel to restrict speed changes to within acceptable limits, considering factors like material strength and maximum permissible diameter.
FORCED VIBRATION.ppt
This document describes forced vibrations of mechanical systems with damping. It provides examples of calculating the amplitude of forced vibrations, natural frequency, stiffness required for vibration isolation, and speed at resonance for systems with masses, springs, and dampers driven by periodic forces. Examples determine properties like amplitude, natural frequency, stiffness, and transmitted force for engines, machines, and masses mounted on springs with reciprocating or rotating unbalanced parts. Calculations are shown for systems at different speeds, including resonance.
FREE VIBRATION.ppt
Basic features of vibratory systems – Degrees of freedom – single degree of freedom – Free vibration – Equations of motion – Natural frequency
BALANCING OF ROTATING MASSES.ppt
1. The document discusses balancing of rotating masses by counteracting centrifugal forces with balancing masses. It covers balancing a single mass with a single mass in the same plane, and with two masses in different planes.
2. Balancing a single mass with two masses in different planes requires satisfying conditions of zero net force and zero net couple on the shaft for dynamic balancing.
3. Balancing multiple masses rotating in the same plane involves constructing force and couple polygons to determine balancing masses and their positions to achieve complete balance.
Forced vibration-.pptx
Response of one degree freedom systems to periodic forcing – Harmonic disturbances –Disturbance caused by unbalance – Support motion –transmissibility – Vibration isolation vibration measurement.
BALANCING OF RECIPROCATING MASSES.ppt
The document discusses balancing of reciprocating masses in engines. It explains that reciprocating parts produce both a shaking force and shaking couple due to varying inertia forces during the engine cycle. The purpose of balancing is to eliminate these effects and reduce vibrations. It describes how balancing masses are used to partially balance primary forces in engines with multiple cylinders arranged in a line. The maximum unbalanced primary and secondary forces and couples are calculated for a example 5 cylinder engine, and it is determined that these peak when the third crank is at 45 degrees position.
Programmable logic Controlller ppt
This document provides an overview of programmable logic controllers (PLCs). It describes the basic structure of a PLC including input/output modules, a central processing unit, memory, and a programming unit. The document outlines how PLCs are used for automation in industrial processes by replacing hardwired relay controls. It also discusses PLC programming using ladder logic and provides examples of logic functions, timers, counters, and data handling capabilities of PLCs. Selection factors for choosing a suitable PLC for an application are also mentioned.
PROGRAMMABLE PERIPHERAL INTERFCAE.ppt
This document discusses the programmable peripheral interface 8255 and its applications. It introduces the 8255 architecture and its operating modes, and provides examples of interfacing it with keyboards, LED displays, analog-to-digital converters, digital-to-analog converters, temperature sensors, stepper motors, and traffic light systems. Diagrams and code examples are given for each of these interfacing applications.
MECHATRONICS UNIT 5.ppt
The document discusses mechatronics systems design and provides examples. It defines a motor as an electro-mechanical device that converts electrical to mechanical energy. The document outlines the stages in designing mechatronics systems, including need identification, problem analysis, specification preparation, solution generation, evaluation, and implementation. It compares traditional and mechatronic design approaches. Case studies of mechatronics systems include a pick and place robot, engine management system, and automatic car park barrier. Possible design solutions are also presented for a timer switch, windscreen wiper, and weighing scales.
8085 MICROPROCESSOR.pptx
The document discusses the 8085 microprocessor and 8051 microcontroller. It provides details on their architecture, components, instruction sets, addressing modes, and timing diagrams. The 8085 has an ALU, registers, control unit and performs operations on 8-bit data. It uses von Neumann architecture. The 8051 is an 8-bit microcontroller that integrates a CPU, memory and programmable I/O on a single chip. It has features like on-chip memory and timers/counters.
MECHATRONICS Unit-5-Motor.ppt
The document discusses different types of electrical motors. It describes DC motors, including brushed and brushless types. It also covers AC motors like synchronous and induction motors. Stepper motors are also summarized, including permanent magnet and variable reluctance types. The key properties and applications of each motor type are highlighted at a high level.
temp,light, proxy Sensor with videos.ppt
This document discusses different types of sensors including temperature sensors like thermistors and thermocouples, light sensors such as photo resistors and photodiodes, and proximity sensors such as optical encoders and Hall Effect sensors. It emphasizes factors to consider when selecting sensors, like required accuracy, precision, sensitivity, operating range, resolution, and reliability.
Unit 1.ppt
The document discusses mechatronics and covers several topics:
1. It defines mechatronics as the synergistic integration of various engineering fields to produce enhanced systems and defines key elements of mechatronic systems.
2. It discusses the history and emergence of mechatronics and provides examples of mechatronic systems.
3. It describes open and closed loop control systems and provides examples of each type of system.
Sensor and transducers.ppt
Sensors are devices that produce an output signal proportional to a physical phenomenon like pressure, temperature, or displacement. Transducers convert one form of energy to another. Static characteristics like range, accuracy, sensitivity and dynamic characteristics like response time describe a sensor's performance. Common sensors include potentiometers, strain gauges, capacitive, inductive, Hall effect, thermistors, thermocouples, photodiodes and proximity sensors. Care must be taken in selecting the proper sensor based on the required accuracy, range, reliability and other factors.
S.I engines
This document discusses spark ignition engines. It covers mixture requirements, fuel injection systems, stages of combustion including normal and abnormal combustion like knocking. Knocking occurs when pockets of air-fuel mixture explode outside of the normal combustion front. Factors that affect knocking include density factors, time factors, and composition factors. The document also discusses combustion chambers and their role in smooth engine operation and high power output.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
More Related Content
More from karthik R
Programmable logic Controlller ppt
This document provides an overview of programmable logic controllers (PLCs). It describes the basic structure of a PLC including input/output modules, a central processing unit, memory, and a programming unit. The document outlines how PLCs are used for automation in industrial processes by replacing hardwired relay controls. It also discusses PLC programming using ladder logic and provides examples of logic functions, timers, counters, and data handling capabilities of PLCs. Selection factors for choosing a suitable PLC for an application are also mentioned.
PROGRAMMABLE PERIPHERAL INTERFCAE.ppt
This document discusses the programmable peripheral interface 8255 and its applications. It introduces the 8255 architecture and its operating modes, and provides examples of interfacing it with keyboards, LED displays, analog-to-digital converters, digital-to-analog converters, temperature sensors, stepper motors, and traffic light systems. Diagrams and code examples are given for each of these interfacing applications.
MECHATRONICS UNIT 5.ppt
The document discusses mechatronics systems design and provides examples. It defines a motor as an electro-mechanical device that converts electrical to mechanical energy. The document outlines the stages in designing mechatronics systems, including need identification, problem analysis, specification preparation, solution generation, evaluation, and implementation. It compares traditional and mechatronic design approaches. Case studies of mechatronics systems include a pick and place robot, engine management system, and automatic car park barrier. Possible design solutions are also presented for a timer switch, windscreen wiper, and weighing scales.
8085 MICROPROCESSOR.pptx
The document discusses the 8085 microprocessor and 8051 microcontroller. It provides details on their architecture, components, instruction sets, addressing modes, and timing diagrams. The 8085 has an ALU, registers, control unit and performs operations on 8-bit data. It uses von Neumann architecture. The 8051 is an 8-bit microcontroller that integrates a CPU, memory and programmable I/O on a single chip. It has features like on-chip memory and timers/counters.
MECHATRONICS Unit-5-Motor.ppt
The document discusses different types of electrical motors. It describes DC motors, including brushed and brushless types. It also covers AC motors like synchronous and induction motors. Stepper motors are also summarized, including permanent magnet and variable reluctance types. The key properties and applications of each motor type are highlighted at a high level.
temp,light, proxy Sensor with videos.ppt
This document discusses different types of sensors including temperature sensors like thermistors and thermocouples, light sensors such as photo resistors and photodiodes, and proximity sensors such as optical encoders and Hall Effect sensors. It emphasizes factors to consider when selecting sensors, like required accuracy, precision, sensitivity, operating range, resolution, and reliability.
Unit 1.ppt
The document discusses mechatronics and covers several topics:
1. It defines mechatronics as the synergistic integration of various engineering fields to produce enhanced systems and defines key elements of mechatronic systems.
2. It discusses the history and emergence of mechatronics and provides examples of mechatronic systems.
3. It describes open and closed loop control systems and provides examples of each type of system.
Sensor and transducers.ppt
Sensors are devices that produce an output signal proportional to a physical phenomenon like pressure, temperature, or displacement. Transducers convert one form of energy to another. Static characteristics like range, accuracy, sensitivity and dynamic characteristics like response time describe a sensor's performance. Common sensors include potentiometers, strain gauges, capacitive, inductive, Hall effect, thermistors, thermocouples, photodiodes and proximity sensors. Care must be taken in selecting the proper sensor based on the required accuracy, range, reliability and other factors.
S.I engines
This document discusses spark ignition engines. It covers mixture requirements, fuel injection systems, stages of combustion including normal and abnormal combustion like knocking. Knocking occurs when pockets of air-fuel mixture explode outside of the normal combustion front. Factors that affect knocking include density factors, time factors, and composition factors. The document also discusses combustion chambers and their role in smooth engine operation and high power output.
More from karthik R (9)
Recently uploaded
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Recently uploaded (20)
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...