त्रिभुवन विश्वविद्यालय शिक्षा परिषद मानविकी संकाय अन्र्तगत द्वितिय वर्ष वि.ए समाज शास्त्रको ३० पुर्णाङ्कको परिपूर्ती यो अध्ययन तयार पारिएको हो। यस अध्ययनको लागि देवचुली नगरपालिका वडा नं १० को विकास निर्माण कार्यमा महिलाहरुको भूमिका सम्बन्धी यो प्रतिवेदन तयार पारेकी छु ।
प्रस्तुत “विकास निर्माण कार्यमा महिलाहरुको सहभागिताको अध्ययन” प्रतिवेदन तयार पार्नको निम्ति आवश्यक सल्लाह सुझावहरु दिएर सहयोग गर्नुहुने हाम्रा आदरणिय शिक्षक श्रीमान् करुण लम्साल ज्यू, श्रीमान् उद्यराज सिग्देल ज्यू प्रति आभारी छु । साथै यस कार्यका लागि आफ्ना व्यस्त समयको बाबजुद तथ्याङ्क संकलन तथा टिपणीको सिलसिलामा सोधिएका प्रश्नहरुको उत्तर दिएर सहयोग पु¥याउनुहुने देवचुली नगरपालिका वडा नं १० नवलपुरका प्रत्यक्ष घर परिवारलाई हार्दिक आभार व्यक्त गर्दछु ।
अन्त्यमा यस लेख्नलाई प्रिन्ट तथा सम्पादन गरि सहयोग गरिदिनु हुने भट्टराई कम्युनिकेसन प्रो.राम प्रसाद भट्टराई ज्यूलाई कृतज्ञाता प्रकट गर्दछु ।
Content;
1. Top spherical dome.
2. Top ring beam.
3. Cylindrical wall.
4. Bottom ring beam.
5. Conical dome.
6. Circular ring beam.
The basics of enticing water tank design and the related components are broadly calculated in this document. The next few documents will demonstrate the design of Intze tank members like column, bracing and foundation. Keep following the updates.....
NUMERICAL SIMULATION OF FLOW THROUGH
OPEN CHANNEL WITH SERIES OF GROINS
Suman Jyoti
Dhaka University of Engineering and Technology, Gazipur
Own Handwriting font
It is a Thesis of B.Sc Civil by Suman Jyoti
info.sumn.ce@gmail.com
Dhaka University of Engineering and Technology, Gazipur
Thesis of numerical simulation of flow through open channel with series of Groins
त्रिभुवन विश्वविद्यालय शिक्षा परिषद मानविकी संकाय अन्र्तगत द्वितिय वर्ष वि.ए समाज शास्त्रको ३० पुर्णाङ्कको परिपूर्ती यो अध्ययन तयार पारिएको हो। यस अध्ययनको लागि देवचुली नगरपालिका वडा नं १० को विकास निर्माण कार्यमा महिलाहरुको भूमिका सम्बन्धी यो प्रतिवेदन तयार पारेकी छु ।
प्रस्तुत “विकास निर्माण कार्यमा महिलाहरुको सहभागिताको अध्ययन” प्रतिवेदन तयार पार्नको निम्ति आवश्यक सल्लाह सुझावहरु दिएर सहयोग गर्नुहुने हाम्रा आदरणिय शिक्षक श्रीमान् करुण लम्साल ज्यू, श्रीमान् उद्यराज सिग्देल ज्यू प्रति आभारी छु । साथै यस कार्यका लागि आफ्ना व्यस्त समयको बाबजुद तथ्याङ्क संकलन तथा टिपणीको सिलसिलामा सोधिएका प्रश्नहरुको उत्तर दिएर सहयोग पु¥याउनुहुने देवचुली नगरपालिका वडा नं १० नवलपुरका प्रत्यक्ष घर परिवारलाई हार्दिक आभार व्यक्त गर्दछु ।
अन्त्यमा यस लेख्नलाई प्रिन्ट तथा सम्पादन गरि सहयोग गरिदिनु हुने भट्टराई कम्युनिकेसन प्रो.राम प्रसाद भट्टराई ज्यूलाई कृतज्ञाता प्रकट गर्दछु ।
Content;
1. Top spherical dome.
2. Top ring beam.
3. Cylindrical wall.
4. Bottom ring beam.
5. Conical dome.
6. Circular ring beam.
The basics of enticing water tank design and the related components are broadly calculated in this document. The next few documents will demonstrate the design of Intze tank members like column, bracing and foundation. Keep following the updates.....
NUMERICAL SIMULATION OF FLOW THROUGH
OPEN CHANNEL WITH SERIES OF GROINS
Suman Jyoti
Dhaka University of Engineering and Technology, Gazipur
Own Handwriting font
It is a Thesis of B.Sc Civil by Suman Jyoti
info.sumn.ce@gmail.com
Dhaka University of Engineering and Technology, Gazipur
Thesis of numerical simulation of flow through open channel with series of Groins
Suman Jyoti
Madan Ashrit Memorial Technical Collage. Gothatar, Kathmandu
The Report Includes:-
Building (Drawing, Theory and Estimation)
Highway ( Detailing, Theory and Calculation)
Sanitary ( ( Detailing, Theory and Calculation)
Irrigation (Theory only)
01 Determination of Normal Consistency of Cement.
02 Determination of Initial and Final Setting Time of
Cement by Vicat Apparatus.
03 Determination of Specific Gravity and Water
Absorption Capacity of Fine Aggregate.
04 Determination of Specific Gravity and Water
Absorption Capacity of Coarse Aggregate.
05 Determination of Total Evaporable Moisture Content
of Aggregate by Drying.
06 Gradation of Fine and Coarse Aggregates.
07Determination of Bulk Unit weight and Voids in
Coarse and Fine Aggregates.
Determination of Compressive Strength of Cement
Mortar.
Determination of Tensile Strength of Cement Mortar.
10 Determination of Slump of Fresh Concrete (Influence
of w/c ratio on Cement Concrete)
11Determination of Compressive Strength of Cement
Concrete.
12 Determination of Splitting Tensile Strength of
Cylindrical Concrete Specimens.
13 Determination of Flexural Strength of Concrete using
Simple Beam.
14 Determination of Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the
Los Angeles Machine.
SUMAN JYOTI
info.sumn.ce
Dhaka University of Engineering and Technology, Gazipur
Suman Jyoti
Dhaka university of Engineering and Technology
Cement: Properties, uses and types, manufacturing methods, reaction taking place during burning of raw materials in the rotary kiln, Setting and hardening time of cement;
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Suman Jyoti
Madan Ashrit Memorial Technical Collage. Gothatar, Kathmandu
The Report Includes:-
Building (Drawing, Theory and Estimation)
Highway ( Detailing, Theory and Calculation)
Sanitary ( ( Detailing, Theory and Calculation)
Irrigation (Theory only)
01 Determination of Normal Consistency of Cement.
02 Determination of Initial and Final Setting Time of
Cement by Vicat Apparatus.
03 Determination of Specific Gravity and Water
Absorption Capacity of Fine Aggregate.
04 Determination of Specific Gravity and Water
Absorption Capacity of Coarse Aggregate.
05 Determination of Total Evaporable Moisture Content
of Aggregate by Drying.
06 Gradation of Fine and Coarse Aggregates.
07Determination of Bulk Unit weight and Voids in
Coarse and Fine Aggregates.
Determination of Compressive Strength of Cement
Mortar.
Determination of Tensile Strength of Cement Mortar.
10 Determination of Slump of Fresh Concrete (Influence
of w/c ratio on Cement Concrete)
11Determination of Compressive Strength of Cement
Concrete.
12 Determination of Splitting Tensile Strength of
Cylindrical Concrete Specimens.
13 Determination of Flexural Strength of Concrete using
Simple Beam.
14 Determination of Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the
Los Angeles Machine.
SUMAN JYOTI
info.sumn.ce
Dhaka University of Engineering and Technology, Gazipur
Suman Jyoti
Dhaka university of Engineering and Technology
Cement: Properties, uses and types, manufacturing methods, reaction taking place during burning of raw materials in the rotary kiln, Setting and hardening time of cement;
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
4. MADAN ASHRITMEMORIALTECHNICALSCHOOL
Kageshwori Manahara, Kathmandu
THEODOLITE FIELD OBSERVATION SHEET
SURVEY CAMP – 2017
Instrument at:- 𝑩𝒎 𝟏 Height of Instrument:-…..
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑪𝒑 𝟐 L 0° 00' 00''
197° 37' 25''
𝑩𝒎 𝟐 L 197° 37' 20'' 197° 37' 20''
𝑩𝒎 𝟐 R 17° 37' 30''
𝑪𝒑 𝟐 R 180° 00' 00'' 197° 37' 30''
Instrument at:- 𝑩𝒎 𝟐 Height of Instrument:-…..
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟏 L 0° 00' 00''
142° 22' 20''
𝑩𝒎 𝟑 L 142° 22' 30'' 142° 22' 30''
𝑩𝒎 𝟑 R 322° 22' 20''
𝑩𝒎 𝟏 R 180° 00' 10'' 142° 22' 10''
Instrument at:- 𝑩𝒎 𝟑 Height of Instrument:-…..
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟐 L 0° 00' 00''
88° 54' 05''
𝑩𝒎 𝟒 L 88° 54' 10'' 88° 54' 10''
𝑩𝒎 𝟒 R 268° 54' 00''
𝑩𝒎 𝟐 R 180° 00' 00'' 88° 54' 00''
Instrument at:- 𝑩𝒎 𝟒 Height of Instrument:-…..
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟑 L 0° 00' 00''
201° 42' 20''
𝑩𝒎 𝟓 L 201° 42' 30'' 201° 42' 30''
𝑩𝒎 𝟓 R 21° 42' 20''
𝑩𝒎 𝟑 R 180° 00' 10'' 201° 42' 10''
Instrument at:- 𝑩𝒎 𝟓 Height of Instrument:-….
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟒 L 0° 00' 00''
157° 30' 35''
𝑩𝒎 𝟔 L 157° 30' 30'' 157° 30' 30''
𝑩𝒎 𝟔 R 337° 30' 40''
𝑩𝒎 𝟒 R 180° 00' 00'' 157° 30' 40''
Measured by: Bishnu P.Bhandari Computed by: Suman Jyoti Checked by:……………………..
5. MADAN ASHRITMEMORIALTECHNICALSCHOOL
Kageshwori Manahara, Kathmandu
THEODOLITE FIELD OBSERVATION SHEET
SURVEY CAMP – 2017
Instrument at:- 𝑩𝒎 𝟔 Height of Instrument:-
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟓 L 0° 00' 00''
86° 26' 15''
𝑩𝒎 𝟕 L 86° 26' 10'' 86° 26' 10''
𝑩𝒎 𝟕 R 266° 26' 20''
𝑩𝒎 𝟓 R 180° 00' 00'' 86° 26' 20''
Instrument at:- 𝑩𝒎 𝟕 Height of Instrument:-
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟔 L 0° 00' 00''
148° 43' 10''
𝑩𝒎 𝟖 L 148° 43' 20'' 148° 43' 20''
𝑩𝒎 𝟖 R 328° 43' 10''
𝑩𝒎 𝟔 R 180° 00' 00'' 148° 43' 00''
Instrument at:- 𝑩𝒎 𝟖 Height of Instrument:-
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟕 L 0° 00' 00''
162° 14' 30''
𝑪𝒑 𝟏 L 162° 14' 40'' 162° 14' 40''
𝑪𝒑 𝟏 R 342° 14' 30''
𝑩𝒎 𝟕 R 180° 00' 10'' 162° 14' 20''
Instrument at:- 𝑪𝒑 𝟏 Height of Instrument:-
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑩𝒎 𝟖 L 0° 00' 00''
209° 27' 55''
𝑪𝒑 𝟐 L 209° 28' 00'' 209° 28' 00''
𝑪𝒑 𝟐 R 29° 28' 00''
𝑩𝒎 𝟖 R 180° 00' 10'' 209° 27' 50''
Instrument at:- 𝑪𝒑 𝟐 Height of Instrument:-
Sighted
To
Face HCR HA Mean H.A
Remarks0 ' '' 0 ' '' 0 ' ''
𝑪𝒑 𝟏 L 0° 00' 00''
45° 03' 25''
𝑩𝒎 𝟏 L 45° 03' 20'' 45° 03' 20''
𝑩𝒎 𝟏 R 225° 03' 30''
𝑪𝒑 𝟏 R 180° 00' 00'' 45° 03' 30''
Measured by: Suman Jyoti Computed by: BishnuP. Bhandari Checked by:……………………..
6. MADAN ASHRITMEMORIALTECHNICALSCHOOL
Kageshwori Manahara, Kathmandu
LEVEL FIELD BOOK
SURVEY CAMP – 2017
Observer:- Date:-
Booker:- Location:-
Stat
ion
Distance BS FS Distance Rise Fall RL Remarks
T M B T M B
01.
02.
03.
04.
05.
06
07.
08.
09.
10.
11
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
Surveyed by:- Checked By:-
7. MADAN ASHRITMEMORIALTECHNICALSCHOOL
Kageshwori Manahara, Kathmandu
LEVEL FIELD BOOK
SURVEY CAMP – 2017
Observer:- Date:-
Booker:- Location:-
Stat
ion
Distance BS FS Distance Rise Fall RL Remarks
T M B T M B
Surveyed by:- Checked By:-