Carpentry tools are required to cut, bring in shape or even install certain basic building materials. This is used while constructing our homes, offices, school buildings, timber bridges or may be ships etc. Carpentry tools makes our life easier every single day Carpentry tools, Pencil, gauge, scriber, marking knives, awl, chalk line, and other woodworking marking tools are the most common. They can be used to create something with a piece of wood, including cutting, shaping, and drilling. They may be used to draw a parallel line to the sides, a jig jag line, or rounds on a workpiece

2. CHISEL
•TOOL USED TO TRIM
AND SHAPE WOOD.

3. PLANE
•USED TO OBTAIN A
SMOOTH AND FLAT
SURFACE.

5. SPOKE SHAVE
•SMALL PLANE-LIKE TOOL
FROM IRREGULARLY
SHAPED OBJECTS.

6. CABINET SCRAPER
•RECTANGULAR PIECE OF
STEEL WITH TWO
CUTTING EDGES USED
FOR WORKING FLAT
SURFACES.

9. CROSS CUT SAW
•HANDSAW USED TO
CUT THE WOOD ACROSS
THE GRAIN.

10. RIP SAW
•HANDSAW USED TO
CUT THE WOOD ALONG
THE GRAIN.

11. BACK SAW
•HANDSAW WITH A REINFORCED SPINE FOR PRECISE
CUTS AND CONTROLLED MOTION.

12. KEYHOLE SAW
•USED TO CUT IRREGULAR
SHAPE EITHER IN SMALL OR
LARGE BOARD. THIS IS USED
FOR CUTTING IN TIGHT
SPACES AND MAKING
INTERNAL CUTS.

13. COPING SAW
•U-SHAPED SAW USED
FOR CUTTING
INTRICATE CUT-OUTS IN
WOODWORKING.

17. DRILL BIT
•THE MOST COMMON
ACCESSORY FOR DRILLS.
THEY ARE USED TO BORE
HOLES IN METALS,
WOODS, PLASTICS, ETC.

18. AUGER BIT
•TOOL USED TO MAKE
HOLE IN WOODS.

19. EXPANSIVE BIT
•TOOL USED TO DRILL
HOLES OF VARIOUS
SIZES IN WOODS.

21. C-CLAMP
•USED FOR HOLDING
TOGETHER PIECES OF
LUMBER WHILE
WORKING.

22. BENCH VISE
•USED TO HOLD ANY
MATERIALS OR TOOLS IN
PLACE.

23. BAR CLAMP
•USED TO HOLD
LARGE BOARDS OR
FRAMES TOGETHER
WHILE ASSEMBLING
OR GLUING.

26. OIL STONE
•USED FOR SHARPENING
EDGE CUTTING TOOLS
SUCH AS CHISEL.

27. FILES
•USED TO SMOOTHEN
METAL AND WOOD
SURFACES.

28. PAINT BRUSH
•USED TO APPLY PAINT
OR WOOD VARNISH ON
WOOD SURFACES.

29. NAIL SET
•USED TO DRIVE THE
HEAD OF NAILS LOWER
THAN SURFACE OF
WOOD.

31. CLAW HAMMER
•USED TO DRIVE AND
PULL OUT NAILS ON
WOODEN SURFACES.

32. MALLET
•MADE OUT OF WOOD OR RUBBER USED TO DRIVE
OTHER TOOLS LIKE CHISEL.

33. SCREW DRIVER
•USED TO DRIVE AND
LOOSE SCREWS.

34. NAIL SET
•USED TO DRIVE THE
HEAD OF NAILS LOWER
THAN SURFACE OF
WOOD.

36. SANDER
•PORTABLE POWER TOOL
USED FOR SANDING
FURNITURE PIECES.

38. ROUTER
•USED FOR SHAPING
SURFACES AND EDGES
OF FURNITURE PARTS.

40. JIGSAW
•POWER TOOL USED
PRIMARILY FOR
CUTTING CURVED OR
IRREGULAR SHAPES OF
WOOD SURFACES.

42. CIRCULAR SAW
•POWER SAW USED FOR
MANY TYPES OF
CUTTING,
PARTICULARLY ON
LARGE PANEL STOCK.

44. ELECTRIC DRILL
•POWER DRILL WHICH IS
USED TO DRILL HOLES IN
VARIOUS MATERIALS TO
PERFORM A MULTITUDE
OF TASKS.

46. GOGGLES
•USED TO PROTECT THE
EYES AGAINST FLYING
DEBRIS AND HARMFUL
LIQUIDS.

47. EAR PROTECTOR
•USED TO PROTECT THE
EARS AGAINST HIGH
FREQUENCY NOISE.

48. FACE MASK
•USED TO PREVENT THE
INHALATION OF
SPRAYED PAINT FUMES.

49. GLOVES
•USED TO PROTECT
THE HANDS WHILE
WORKING.

50. APRON
•USED TO PROTECT THE
WORKER AGAINST
FLYING DEBRIS.