ThinkRace Technology - GPS Tracker, Fitness Band & IoT Services
•
1 like•230 views
This document provides information on OEM/ODM/JDM manufacturing services including quality management and testing capabilities. The mission is to provide design and manufacturing services for safety and fitness monitoring products. Services include product development from concept to mass production, manufacturing capabilities of 1.5 million units per month for SMT and assembly, and 2 million units per month for testing. Quality management involves rigorous testing and reliability procedures.
Report
Share
Report
Share
Download to read offline
Recommended
Embedded software validation best practices with NI and RQM
Embedded control software is growing exponentially in mechanical systems, which forces test methods to evolve even faster. This presentation was part of the Rational Quality Manager enlightenment series describing how National Instruments and IBM provide end-to-end traceability and test component reuse for superior system quality and validation by enabling consistent testing, results analysis, and traceability throughout the development process.
Pull requests and testers can be friends
This is a short preview of a talk I will giving at Agile Testing Days 2014
The rise of Distributed Version Control Systems with good merge support has rehabilitated Feature Branches with many Open Source projects (OSS) receiving contributions as Pull Requests. Feature Branching is a technique where developers do all their changes separate from the mainline of code. Next they open a Pull Request to have their code merged into the mainline after being peer reviewed.
This OSS popularity for Pull requests with Git and Mercurial has been transferring to commercial projects, with many teams now adopting it internally. SCM is seen as a Developer centric domain but testers have a lot to gain. This presentation will cover an introduction to Pull Requests and demonstrate how to identify key information that can be used to as inputs to different testing techniques.
While not a direct substitute for pairing with a developer, pull requests represent an opportunity to review the code, automated testing and learn from the developers by asking questions. As each Pull Request represents a single User Story this information can help limit the scope of Exploratory based testing sessions and be utilized to further understand the risk of the changes to the system.
Software development contractual issues susan atkinson
Software development contractual issues susan atkinsonIFCLA - International Federation of Computer Law Associations
This document discusses contractual issues in software development projects using agile versus waterfall methodologies. It compares the two approaches and outlines eight key features of an agile contract, including treating it as a contract for services rather than goods, using a framework agreement with time-boxed iterations, focusing on capacity over specific features, requiring customer involvement, and including metrics for productivity and quality.5 Ways to Accelerate Standards Compliance with Static Code Analysis
In mission- and safety-critical industries, static code analysis (SCA) is key to facilitating the development of robust and reliable software - yet, according to VDC Research, only 27% of embedded developers report using SCA tools on their current project.
Why is adoption low and what can you do to deploy SCA effectively?
Join Walter Capitani (Rogue Wave Software) and Christopher Rommel (VDC Research) as they review the results of the latest VDC Research paper on the trends, techniques, and best practices for standards compliance within embedded software teams. You will learn what organizations like yours are doing now and how to prepare for future challenges by:
-Understanding trends for standards compliance in 2018
-Identifying common challenges for automotive, medical, industrial automation, and other types of applications
-Learning best practices for achieving compliance using different tools, techniques, and processes
After attending this webinar, you'll be better prepared to plan and execute a standards compliance program for your team and maximize the effectiveness of static code analysis.
EuroPython 2019: Modern Continuous Delivery for Python Developers
Deployment automation, cloud platforms, containerization, short iterations to develop and release software—we’ve progressed a lot. And finally it’s official: Kubernetes and OpenShift are the established platforms to help us do scaling and zero downtime deployments with just a few hundred lines of YAML. It’s a great time.
Can we finally put all our eggs into one basket? Identify the cloud platform that fits our needs, and jump on it? That could well backfire: Vendor lock-in is the new waterfall, it slows you down. In future you’ll want to jump over to the next better platform, in a matter of minutes. Not months.
This talk is about The Art of Writing deployment pipelines that will survive Kubernetes, OpenShift and the like. It’s for Python developers and Kubernetes enthusiasts of all levels – no domain specific knowledge required, all you need to understand will be explained. You’ll learn how to separate application-specific and deployment-specific configuration details, to maximize your freedom and avoid vendor lock-in.
Come see a demo of a Django project setup that covers everything from local development to automatic scaling, flexible enough to be deployed on any of your favorite container platforms. Take home a working, future-proof setup for your Python applications.
See the original presentation at https://slides.com/bittner/modern-continuous-delivery/
My reusme
Gaston Williams is seeking a job as a quality control inspector in Lafayette, LA. He has over 10 years of experience in quality control and assurance roles inspecting parts and materials for compliance with ISO and industry standards. His previous roles involved inspecting incoming parts and materials, assisting third party inspectors, checking certifications, and performing inspections. He has a strong understanding of processes, standards, and technologies related to manufacturing and is motivated to ensure high levels of quality, safety, and reliability.
Sensible defaults for CI and CD in 2019
CI and CD are nothing new. But learning more about how to do them better is where we should be focusing our energy – the goal is after all to enhance our ability to deliver value.
The Evolution of Agile - Continuous Delivery - Extending Agile out to Product...
Continuous delivery (CD) is a set of practices that aims to build, test, and release high quality software frequently and reliably. It is based on automating the software delivery process, including integrating, testing, and deploying code changes. The key principles of CD are automating builds, deployments, testing, and having everyone responsible for the release process. This reduces risk and allows teams to get feedback faster through more frequent releases of working software.
Recommended
Embedded software validation best practices with NI and RQM
Embedded control software is growing exponentially in mechanical systems, which forces test methods to evolve even faster. This presentation was part of the Rational Quality Manager enlightenment series describing how National Instruments and IBM provide end-to-end traceability and test component reuse for superior system quality and validation by enabling consistent testing, results analysis, and traceability throughout the development process.
Pull requests and testers can be friends
This is a short preview of a talk I will giving at Agile Testing Days 2014
The rise of Distributed Version Control Systems with good merge support has rehabilitated Feature Branches with many Open Source projects (OSS) receiving contributions as Pull Requests. Feature Branching is a technique where developers do all their changes separate from the mainline of code. Next they open a Pull Request to have their code merged into the mainline after being peer reviewed.
This OSS popularity for Pull requests with Git and Mercurial has been transferring to commercial projects, with many teams now adopting it internally. SCM is seen as a Developer centric domain but testers have a lot to gain. This presentation will cover an introduction to Pull Requests and demonstrate how to identify key information that can be used to as inputs to different testing techniques.
While not a direct substitute for pairing with a developer, pull requests represent an opportunity to review the code, automated testing and learn from the developers by asking questions. As each Pull Request represents a single User Story this information can help limit the scope of Exploratory based testing sessions and be utilized to further understand the risk of the changes to the system.
Software development contractual issues susan atkinson
Software development contractual issues susan atkinsonIFCLA - International Federation of Computer Law Associations
This document discusses contractual issues in software development projects using agile versus waterfall methodologies. It compares the two approaches and outlines eight key features of an agile contract, including treating it as a contract for services rather than goods, using a framework agreement with time-boxed iterations, focusing on capacity over specific features, requiring customer involvement, and including metrics for productivity and quality.5 Ways to Accelerate Standards Compliance with Static Code Analysis
In mission- and safety-critical industries, static code analysis (SCA) is key to facilitating the development of robust and reliable software - yet, according to VDC Research, only 27% of embedded developers report using SCA tools on their current project.
Why is adoption low and what can you do to deploy SCA effectively?
Join Walter Capitani (Rogue Wave Software) and Christopher Rommel (VDC Research) as they review the results of the latest VDC Research paper on the trends, techniques, and best practices for standards compliance within embedded software teams. You will learn what organizations like yours are doing now and how to prepare for future challenges by:
-Understanding trends for standards compliance in 2018
-Identifying common challenges for automotive, medical, industrial automation, and other types of applications
-Learning best practices for achieving compliance using different tools, techniques, and processes
After attending this webinar, you'll be better prepared to plan and execute a standards compliance program for your team and maximize the effectiveness of static code analysis.
EuroPython 2019: Modern Continuous Delivery for Python Developers
Deployment automation, cloud platforms, containerization, short iterations to develop and release software—we’ve progressed a lot. And finally it’s official: Kubernetes and OpenShift are the established platforms to help us do scaling and zero downtime deployments with just a few hundred lines of YAML. It’s a great time.
Can we finally put all our eggs into one basket? Identify the cloud platform that fits our needs, and jump on it? That could well backfire: Vendor lock-in is the new waterfall, it slows you down. In future you’ll want to jump over to the next better platform, in a matter of minutes. Not months.
This talk is about The Art of Writing deployment pipelines that will survive Kubernetes, OpenShift and the like. It’s for Python developers and Kubernetes enthusiasts of all levels – no domain specific knowledge required, all you need to understand will be explained. You’ll learn how to separate application-specific and deployment-specific configuration details, to maximize your freedom and avoid vendor lock-in.
Come see a demo of a Django project setup that covers everything from local development to automatic scaling, flexible enough to be deployed on any of your favorite container platforms. Take home a working, future-proof setup for your Python applications.
See the original presentation at https://slides.com/bittner/modern-continuous-delivery/
My reusme
Gaston Williams is seeking a job as a quality control inspector in Lafayette, LA. He has over 10 years of experience in quality control and assurance roles inspecting parts and materials for compliance with ISO and industry standards. His previous roles involved inspecting incoming parts and materials, assisting third party inspectors, checking certifications, and performing inspections. He has a strong understanding of processes, standards, and technologies related to manufacturing and is motivated to ensure high levels of quality, safety, and reliability.
Sensible defaults for CI and CD in 2019
CI and CD are nothing new. But learning more about how to do them better is where we should be focusing our energy – the goal is after all to enhance our ability to deliver value.
The Evolution of Agile - Continuous Delivery - Extending Agile out to Product...
Continuous delivery (CD) is a set of practices that aims to build, test, and release high quality software frequently and reliably. It is based on automating the software delivery process, including integrating, testing, and deploying code changes. The key principles of CD are automating builds, deployments, testing, and having everyone responsible for the release process. This reduces risk and allows teams to get feedback faster through more frequent releases of working software.
MayorTek Technical Services - Overview
The document provides an overview of technical services offered by MayorTek including product development, engineering design, quality management, project management, and various specialized services. Key services described include mechanical, electrical, and software engineering; industrial design; systems architecture; testing; regulatory compliance; value analysis; and approaches to optimize design such as design for manufacturing and quality.
Lads Tech Company Profile V4.0
Lad's Technologies is an IT and technology services company focused on providing end-to-end solutions for embedded devices, consumer electronics, and e-governance projects. It offers services such as software development, product engineering, R&D solutions, and IT services across several domains including embedded-telecom, avionics, and automotive software. The company aims to be a leader in embedded technologies through innovative solutions and maintains facilities in Bangalore, India.
GenerationRFID_Corp_2015_02
Generation RFID is a technological company that provides custom embedded electronic services, products, and solutions. It has 20 engineers available to satisfy customer needs in areas like embedded developments, functional testing, and automated optical inspection. Some of its success stories include developing smart junction boxes, temperature controllers, and battery regeneration systems for industrial and automotive clients. The company is ISO 9001 certified.
【MAKER講堂】產品開發流程大揭密I
This document outlines David Peng's background and experience, and provides an overview of the product lifecycle management (PLM) process for a new product design. It defines key phases in the design process including EVT (engineering verification test), DVT (design verification test), and PVT (product verification test). For each phase, it describes the purpose, tasks involved, and how the phases relate to project schedule, cost, and resource planning. It also discusses some important considerations for startups and makers in adapting the PLM process, including conducting a proof of concept before full product development.
Plm design process for startup or maker (1)
The document provides an overview of the product lifecycle management (PLM) process for startups and makers, with a focus on the engineering verification test (EVT) phase. It discusses key considerations for EVT including layout, power and grounding, thermal management, and simulation. The document emphasizes adapting the traditional PLM model to the spontaneity of startups by adding an initial proof of concept phase before the formal EVT. It also stresses validating market fit and ensuring the identified pain point is one customers truly experience before proceeding with development.
Moldflow Analysis Presentation
Polysmart is an engineering services company established in 2005 that specializes in plastic design, moldflow analysis, and tool design. It has over 50 years of experience in engineering plastics for industries like automotive and appliances. Polysmart aims to be a world leader in plastics engineering services by offering high quality, cost-effective, and customized solutions to its customers.
Continuous Integration for z using Test Data Management and Application D...
Continuous Integration for z using Test Data Management and Application D...DevOps for Enterprise Systems
DevOps aims to shorten the development lifecycle by integrating development and testing. This presentation discusses implementing continuous integration testing for System z applications using Rational Developer for zSystems, Rational Development and Test, Rational Team Concert, and Optim Test Data Management. It demonstrates how these tools allow developers to check code in and out of source control, build and test code on sandbox environments, run automated tests, and report results. This enables faster feedback and higher quality code.PLM N&R Master
The document discusses the requirements and regulations of the automotive industry, including VDA, AIAG, ISO/TS-16949 standards. It outlines the product life cycle management (PLM) process and key requirements at each gate, including planning, design reviews, supplier readiness, process verification, and continuous improvement. Maintaining compliance with legal and OEM standards while meeting PLM gates is important for on-time vehicle launches, quality production, and financial performance.
Sw qual joint webinar deck (5)
When created early in the product development lifecycle, a trace matrix can do more than just help you gain FDA approval for your device. Unfortunately, many companies create the matrix sporadically during a project, mainly right before regulatory submission—too late to capture the benefits a well-maintained matrix can deliver.
During this recorded webinar, guest speaker Steve Rakitin, President of Software Quality Consulting, discussed five of the benefits gained by maintaining a matrix throughout the project. A software engineer with more than 20 years of experience in the medical device industry, Steve explains how a trace matrix can help you:
- Plan and estimate testing and validation needs
- Ensure all requirements are implemented
- Verify that all requirements have been tested
- Manage change throughout product development
- Provide evidence that hazard mitigations are implemented and validated
Beyond FDA Compliance Webinar: 5 Hidden Benefits of Your Traceability Matrix
This document discusses the regulatory requirements for software traceability and the benefits of using a requirements trace matrix (RTM). It notes that traceability is required by FDA guidance to link requirements with design, implementation, testing and risk mitigation. An RTM provides benefits such as ensuring all requirements are implemented and tested, managing changes, and demonstrating that hazards are mitigated. The document provides an example of how an RTM can be used and validated as a software tool.
Overview of PTC’s Corporate Vision and Strategy
Find out how business process transformation can lead to a competitive product and service advantage.
H&T_Company Profile
H&T is an intelligent controller design and manufacturing company founded in 2000 by two Chinese universities. It has grown to include multiple business units and global offices. The company focuses on products like home appliance controllers, LED lighting, and automotive electronics. It has a large R&D team that works on technologies like motor control, sensors, and cloud services. H&T has manufacturing facilities in China and provides quality assurance throughout the design and production processes.
J-Squared Technology Inc.
J-Squared Technologies Inc. is a global engineering firm specializing in product development, maintenance, repair and overhaul for mission-critical systems. It has offices in Canada and the US and partners internationally. The company has over 50 skilled employees and is certified in quality management and aerospace standards. It offers turn-key product development and life-cycle support services, including embedded systems engineering, mechanical engineering, and product life-cycle management. Customers choose J-Squared for its experience in safety-critical programs and ability to deliver projects on schedule.
Continuous Delivery for IT Operations Teams
Mark Rendell leads the DevOps Control Services Centre at Accenture, which provides Continuous Delivery services to projects. He discusses how Continuous Delivery relies on operations teams to provide consistent environments and testing. It also teaches operations teams to adopt practices from developers like infrastructure as code and automated testing. This transition means operations teams focus more on delivering value through software and treating infrastructure like an application.
Corporate profile 20150520-English
This document provides an overview of Future Industrial Development Co., Ltd., a leading provider of LCD/LCM equipment solutions. Some key points:
- The company was founded in 1998 and has nearly 600 employees engaged in R&D, manufacturing, sales, and logistics support.
- It offers a wide range of automation equipment and customized solutions for the LCD/LCM industry, including supporting equipment, production lines, and non-standard automation equipment.
- The company has established technology and quality systems, achieving certifications like ISO9001. It aims to lead industry trends and become an international leader in industrial automation equipment.
Navitas Hpdc Dies (0412)
This document summarizes the capabilities of a company in fabricating high-quality die casting dies for aluminum and magnesium materials. The company offers full-service die design, manufacturing, casting, and assembly. It has over 120 employees and certifications in quality management. The company utilizes advanced CAD/CAM technologies to design dies and has machining capabilities like CNC, EDM, and milling. It also provides die casting of automotive and other metal parts and aims for zero defects through its quality assurance systems. The company has over 15 years of experience serving customers in Asia, Europe, and North America.
DBM_Associates_Presentation 2013_11
DBM Associates is an engineering consulting firm specializing in medical devices, semiconductors, and intellectual property. It provides cost-effective design, production, and customer support services. The core team includes experts in electrical engineering, medical device development, semiconductor equipment, and compliance. DBM Associates has experience with a variety of projects including particle detectors, critical care monitors, infusion pumps, and semiconductor capital equipment.
Citec India Profile 2017
Engineering consultancy in India offering engineering and documentation services for Power plants, Refineries, Pipelines, Skids, Chemicals, Fertilizers, Steel, Cement industries, Material handling systems etc
Making Use of a Knowledgeable Design by Design for Manufacturing
Design for manufacturing, making use of a knowledgeable design staff, improves return on general venture investment by developing efficient, repeatable, trusted items and preventing expensive item problems. Design for manufacturing will improve the high quality of an item from the starting of investment. Vayo provide the best DFM Software, check out design for manufacturing at http://www.vayoinfo.com/
Procedure of Proactively Designing Products by Design for Manufacturability (...
Design for manufacturability (DFM) is the procedure of proactively designing products to improve all the manufacturing features: fabrication, assembly, test, procurement, shipping, delivery, service, and repair, and guarantee the most effective cost, quality, reliability, regulatory compliance, safety, time-to-market, and client fulfillment. VayoInfo provide the best design for manufacturability, check out VayoInfo design for manufacturing at http://www.vayoinfo.com/
GPS Services and Tracking Devices – ThinkRace Technology
Providing complete GPS Tracking Solutions and manufacturing tracking devices to ensure family and vehicle safety since 2006. We also provide satisfactory OEM/ODM Services, Prototype Development, Software and App Development for our clients. To know more about our products and services,
please follow the below link
http://www.thinkrace.com/
Obd ii vt200 & vt400 introduction
OBD GPS Tracker for CarVT200 – Virtually Connect Your Car to Your Digital Life
The VT200 OBD Car Tracking device allows you to connect your car to your digital life. Vehicle’s location data and engine performance analysis wirelessly syncs in to your smartphone or laptop. You can track your car’s location in real-time or view status reports of vehicle components via the mobile app or web platform.
To get more information about our dealers, distributors & partners and for placing bulk orders, please contact
http://www.thinkrace.com/thinkrace-obd2-gps-car-tracker-vt200.aspx
More Related Content
Similar to ThinkRace Technology - GPS Tracker, Fitness Band & IoT Services
MayorTek Technical Services - Overview
The document provides an overview of technical services offered by MayorTek including product development, engineering design, quality management, project management, and various specialized services. Key services described include mechanical, electrical, and software engineering; industrial design; systems architecture; testing; regulatory compliance; value analysis; and approaches to optimize design such as design for manufacturing and quality.
Lads Tech Company Profile V4.0
Lad's Technologies is an IT and technology services company focused on providing end-to-end solutions for embedded devices, consumer electronics, and e-governance projects. It offers services such as software development, product engineering, R&D solutions, and IT services across several domains including embedded-telecom, avionics, and automotive software. The company aims to be a leader in embedded technologies through innovative solutions and maintains facilities in Bangalore, India.
GenerationRFID_Corp_2015_02
Generation RFID is a technological company that provides custom embedded electronic services, products, and solutions. It has 20 engineers available to satisfy customer needs in areas like embedded developments, functional testing, and automated optical inspection. Some of its success stories include developing smart junction boxes, temperature controllers, and battery regeneration systems for industrial and automotive clients. The company is ISO 9001 certified.
【MAKER講堂】產品開發流程大揭密I
This document outlines David Peng's background and experience, and provides an overview of the product lifecycle management (PLM) process for a new product design. It defines key phases in the design process including EVT (engineering verification test), DVT (design verification test), and PVT (product verification test). For each phase, it describes the purpose, tasks involved, and how the phases relate to project schedule, cost, and resource planning. It also discusses some important considerations for startups and makers in adapting the PLM process, including conducting a proof of concept before full product development.
Plm design process for startup or maker (1)
The document provides an overview of the product lifecycle management (PLM) process for startups and makers, with a focus on the engineering verification test (EVT) phase. It discusses key considerations for EVT including layout, power and grounding, thermal management, and simulation. The document emphasizes adapting the traditional PLM model to the spontaneity of startups by adding an initial proof of concept phase before the formal EVT. It also stresses validating market fit and ensuring the identified pain point is one customers truly experience before proceeding with development.
Moldflow Analysis Presentation
Polysmart is an engineering services company established in 2005 that specializes in plastic design, moldflow analysis, and tool design. It has over 50 years of experience in engineering plastics for industries like automotive and appliances. Polysmart aims to be a world leader in plastics engineering services by offering high quality, cost-effective, and customized solutions to its customers.
Continuous Integration for z using Test Data Management and Application D...
Continuous Integration for z using Test Data Management and Application D...DevOps for Enterprise Systems
DevOps aims to shorten the development lifecycle by integrating development and testing. This presentation discusses implementing continuous integration testing for System z applications using Rational Developer for zSystems, Rational Development and Test, Rational Team Concert, and Optim Test Data Management. It demonstrates how these tools allow developers to check code in and out of source control, build and test code on sandbox environments, run automated tests, and report results. This enables faster feedback and higher quality code.PLM N&R Master
The document discusses the requirements and regulations of the automotive industry, including VDA, AIAG, ISO/TS-16949 standards. It outlines the product life cycle management (PLM) process and key requirements at each gate, including planning, design reviews, supplier readiness, process verification, and continuous improvement. Maintaining compliance with legal and OEM standards while meeting PLM gates is important for on-time vehicle launches, quality production, and financial performance.
Sw qual joint webinar deck (5)
When created early in the product development lifecycle, a trace matrix can do more than just help you gain FDA approval for your device. Unfortunately, many companies create the matrix sporadically during a project, mainly right before regulatory submission—too late to capture the benefits a well-maintained matrix can deliver.
During this recorded webinar, guest speaker Steve Rakitin, President of Software Quality Consulting, discussed five of the benefits gained by maintaining a matrix throughout the project. A software engineer with more than 20 years of experience in the medical device industry, Steve explains how a trace matrix can help you:
- Plan and estimate testing and validation needs
- Ensure all requirements are implemented
- Verify that all requirements have been tested
- Manage change throughout product development
- Provide evidence that hazard mitigations are implemented and validated
Beyond FDA Compliance Webinar: 5 Hidden Benefits of Your Traceability Matrix
This document discusses the regulatory requirements for software traceability and the benefits of using a requirements trace matrix (RTM). It notes that traceability is required by FDA guidance to link requirements with design, implementation, testing and risk mitigation. An RTM provides benefits such as ensuring all requirements are implemented and tested, managing changes, and demonstrating that hazards are mitigated. The document provides an example of how an RTM can be used and validated as a software tool.
Overview of PTC’s Corporate Vision and Strategy
Find out how business process transformation can lead to a competitive product and service advantage.
H&T_Company Profile
H&T is an intelligent controller design and manufacturing company founded in 2000 by two Chinese universities. It has grown to include multiple business units and global offices. The company focuses on products like home appliance controllers, LED lighting, and automotive electronics. It has a large R&D team that works on technologies like motor control, sensors, and cloud services. H&T has manufacturing facilities in China and provides quality assurance throughout the design and production processes.
J-Squared Technology Inc.
J-Squared Technologies Inc. is a global engineering firm specializing in product development, maintenance, repair and overhaul for mission-critical systems. It has offices in Canada and the US and partners internationally. The company has over 50 skilled employees and is certified in quality management and aerospace standards. It offers turn-key product development and life-cycle support services, including embedded systems engineering, mechanical engineering, and product life-cycle management. Customers choose J-Squared for its experience in safety-critical programs and ability to deliver projects on schedule.
Continuous Delivery for IT Operations Teams
Mark Rendell leads the DevOps Control Services Centre at Accenture, which provides Continuous Delivery services to projects. He discusses how Continuous Delivery relies on operations teams to provide consistent environments and testing. It also teaches operations teams to adopt practices from developers like infrastructure as code and automated testing. This transition means operations teams focus more on delivering value through software and treating infrastructure like an application.
Corporate profile 20150520-English
This document provides an overview of Future Industrial Development Co., Ltd., a leading provider of LCD/LCM equipment solutions. Some key points:
- The company was founded in 1998 and has nearly 600 employees engaged in R&D, manufacturing, sales, and logistics support.
- It offers a wide range of automation equipment and customized solutions for the LCD/LCM industry, including supporting equipment, production lines, and non-standard automation equipment.
- The company has established technology and quality systems, achieving certifications like ISO9001. It aims to lead industry trends and become an international leader in industrial automation equipment.
Navitas Hpdc Dies (0412)
This document summarizes the capabilities of a company in fabricating high-quality die casting dies for aluminum and magnesium materials. The company offers full-service die design, manufacturing, casting, and assembly. It has over 120 employees and certifications in quality management. The company utilizes advanced CAD/CAM technologies to design dies and has machining capabilities like CNC, EDM, and milling. It also provides die casting of automotive and other metal parts and aims for zero defects through its quality assurance systems. The company has over 15 years of experience serving customers in Asia, Europe, and North America.
DBM_Associates_Presentation 2013_11
DBM Associates is an engineering consulting firm specializing in medical devices, semiconductors, and intellectual property. It provides cost-effective design, production, and customer support services. The core team includes experts in electrical engineering, medical device development, semiconductor equipment, and compliance. DBM Associates has experience with a variety of projects including particle detectors, critical care monitors, infusion pumps, and semiconductor capital equipment.
Citec India Profile 2017
Engineering consultancy in India offering engineering and documentation services for Power plants, Refineries, Pipelines, Skids, Chemicals, Fertilizers, Steel, Cement industries, Material handling systems etc
Making Use of a Knowledgeable Design by Design for Manufacturing
Design for manufacturing, making use of a knowledgeable design staff, improves return on general venture investment by developing efficient, repeatable, trusted items and preventing expensive item problems. Design for manufacturing will improve the high quality of an item from the starting of investment. Vayo provide the best DFM Software, check out design for manufacturing at http://www.vayoinfo.com/
Procedure of Proactively Designing Products by Design for Manufacturability (...
Design for manufacturability (DFM) is the procedure of proactively designing products to improve all the manufacturing features: fabrication, assembly, test, procurement, shipping, delivery, service, and repair, and guarantee the most effective cost, quality, reliability, regulatory compliance, safety, time-to-market, and client fulfillment. VayoInfo provide the best design for manufacturability, check out VayoInfo design for manufacturing at http://www.vayoinfo.com/
Similar to ThinkRace Technology - GPS Tracker, Fitness Band & IoT Services (20)
Continuous Integration for z using Test Data Management and Application D...
Continuous Integration for z using Test Data Management and Application D...
Beyond FDA Compliance Webinar: 5 Hidden Benefits of Your Traceability Matrix
Beyond FDA Compliance Webinar: 5 Hidden Benefits of Your Traceability Matrix
Making Use of a Knowledgeable Design by Design for Manufacturing
Making Use of a Knowledgeable Design by Design for Manufacturing
Procedure of Proactively Designing Products by Design for Manufacturability (...
Procedure of Proactively Designing Products by Design for Manufacturability (...
More from ThinkRace Technology
GPS Services and Tracking Devices – ThinkRace Technology
Providing complete GPS Tracking Solutions and manufacturing tracking devices to ensure family and vehicle safety since 2006. We also provide satisfactory OEM/ODM Services, Prototype Development, Software and App Development for our clients. To know more about our products and services,
please follow the below link
http://www.thinkrace.com/
Obd ii vt200 & vt400 introduction
OBD GPS Tracker for CarVT200 – Virtually Connect Your Car to Your Digital Life
The VT200 OBD Car Tracking device allows you to connect your car to your digital life. Vehicle’s location data and engine performance analysis wirelessly syncs in to your smartphone or laptop. You can track your car’s location in real-time or view status reports of vehicle components via the mobile app or web platform.
To get more information about our dealers, distributors & partners and for placing bulk orders, please contact
http://www.thinkrace.com/thinkrace-obd2-gps-car-tracker-vt200.aspx
OBD II VT200 & VT400 Introduction
OBD Car GPS Tracker
Fleet Management, Automobile, Insurance, Personal Real-time GPS Tracking
Drive Smart with OBD GPS Tracker – Simple Plug & Play Device
Models: VT200, VT200B & VT400 4G
Dealers, distributers & business partners welcome
ThinkRace Technology leading manufacturer & supplier of GPS tracker, fitness equipment’s & iOT services
http://www.thinkrace.com/product-asset-tracking.aspx
OBD ii VT200 & VT400 introduction
OBD GPS Tracker for Car – Virtually Connect Your Car to Your Digital Life
The OBD Car Tracking device allows you to connect your car to your digital life. Vehicle’s location data and engine performance analysis wirelessly syncs in to your smartphone or laptop. You can track your car’s location in real-time or view status reports of vehicle components via the mobile app or web platform.
To get more information about our dealers, distributors & partners and for placing bulk orders, please contact
ThinkRace Technology
VT200 OBD2 Vehicle Tracker – specifications
Got tangled up in wires while installing the vehicle tracker in your car? Well, untangle from the mess you’re in with VT200 OBD2 tracker. You just need to connect the tracker to your car’s OBD Port and you’re good to go. Get your car’s location and vehicle statistics on your smartphone and PC with its intelligent sync function.
For more details, please follow the below link
http://www.thinkrace.com/thinkrace-obd2-gps-car-tracker-vt200.aspx
Bluetooth Smart Wristband M2
M2 is a sport smart Bluetooth bracelet which helps you build scientific exercise plan
it can test your heart rate, steps taken, calories burned and so on.
Our M2 fitness bracelet will be a best companion for sport lover.
Contact for bulk order
To know more visit -http://thinkrace.com/thinkrace-sport-smart-bracelet-m2.aspx
More from ThinkRace Technology (6)
GPS Services and Tracking Devices – ThinkRace Technology
GPS Services and Tracking Devices – ThinkRace Technology
Recently uploaded
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Gursev Pirge, PhD
Senior Data Scientist - JohnSnowLabs
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Recently uploaded (20)
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
ThinkRace Technology - GPS Tracker, Fitness Band & IoT Services
- 2. CONTENTS Our Mission Our Products OEM/ODM/JDM Quality Management Services
- 3. 01 Mission
- 4. Our Mission We provide design & manufacture service for safety and fitness monitoring products Safety Fitness
- 5. 02 Products
- 8. IOT Devices
- 9. 03 JDM
- 10. JDM Product Lead manager Concept ID MD Prototype Mockup EE Firmware EVT DVT PVT Function test Reliability test BOM Release SIP/SOP MP Release Package Quality Control Certificate Shipping Warranty Feedback Client Team ThinkRace Team Development ProductionDesign Delivery
- 11. Design R&D QA PD Design Resource ID/MD Package Design UI Design R&D Resource PCB Layout Firmware RF Engineer Material Engineer Cloud Platform Mobile app QA Team QC engineer Test engineer Production Team Process engineer Industrial engineer Manufacturing engineer NPI Development Resource
- 13. SMT Capability 1.5 million per month 19 high speed SMT lines
- 14. Test Capability 2 million per month 8 PCBA test lines
- 15. Assemble Capability 1.5 million per month 20 assemble line 8 package line
- 16. 04 Quality
- 17. Development Process Management Plan Kick off EVT Engineering Verification DVT Design Verification PVT Production Verification MP Mass Production • Production Definition • Project Approval • Project Tem • Engineering Prototype • Design Goal & Specification • ID/MD Design • Electrical Design • Molding Test • Circuit Integration • Pilot(10 pcs) • DFEMA • Molding • Micro Production(100 pcs) • PFEMA • Scale • Yield Rate • Failure Analysis • Packing
- 18. Testing • Temperature & humanity • salt spray test • Water proof test • Illumination test • RF Test • Drop test • Charge test • Traction Test Environment01 • Battery test • ESD test • ROHS & REACH Mechanical02 Safety03
- 21. IOT System Services Mobile App WebApp Third Party Systems OpenAPI Users System LBS System IOT Sensiors Data Database IOT Application System IOT Communication Gateway Business Management System