Thin film thickness Tester, Thickness Measurement
•
0 likes•280 views
This document provides information about the CHY-CA THICKNESS MEASURING INSTRUMENT. It can measure the thickness of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials between 0-12mm thick. The instrument has high testing accuracy and resolution of 0.1 micron. It can operate manually or automatically and displays real-time maximum, minimum and average data.
Report
Share
Report
Share
Download to read offline
Recommended
Benchtop thickness measurement device 
The CHY-C2 Thickness Tester uses a mechanical contacting method to test thickness accurately and standardly. It can test a range of materials from 0-2 mm up to 12 mm, operates at 10 tests/min, and displays real-time data, statistics, and calibration information. The tester conforms to various industry standards and is applicable for precision thickness testing of plastics, paper, foil, and other materials.
precise thickness tester
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
MXD-02-Coefficient-of-Friction-Tester
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
Coefficient of Friction Measurement Device
MXD-01 Coefficient of Friction Tester is strictly based on GB 10006 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Friction / Peel Strength Tester
FPT-F1 Friction/Peel Tester can be used to test coefficients of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabric style test), metal-plastic composite strip/belt for communication cable, conveyor belt and textile, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper and protective films, and etc.
Bitumin specification
Bitumin Tape Specification about color, Adhesion tape to tape, Adhesion tape to steel for PT. Anugrah Kita
website : http://anugrahkita.co.id
Coefficient of Friction Tester
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
Coefficient of Friction Testing Instrument
MXD-01A Coefficient of Friction Tester is strictly based on ASTM D1894 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Recommended
Benchtop thickness measurement device
The CHY-C2 Thickness Tester uses a mechanical contacting method to test thickness accurately and standardly. It can test a range of materials from 0-2 mm up to 12 mm, operates at 10 tests/min, and displays real-time data, statistics, and calibration information. The tester conforms to various industry standards and is applicable for precision thickness testing of plastics, paper, foil, and other materials.
precise thickness tester
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
MXD-02-Coefficient-of-Friction-Tester
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
Coefficient of Friction Measurement Device
MXD-01 Coefficient of Friction Tester is strictly based on GB 10006 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Friction / Peel Strength Tester
FPT-F1 Friction/Peel Tester can be used to test coefficients of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabric style test), metal-plastic composite strip/belt for communication cable, conveyor belt and textile, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper and protective films, and etc.
Bitumin specification
Bitumin Tape Specification about color, Adhesion tape to tape, Adhesion tape to steel for PT. Anugrah Kita
website : http://anugrahkita.co.id
Coefficient of Friction Tester
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
Coefficient of Friction Testing Instrument
MXD-01A Coefficient of Friction Tester is strictly based on ASTM D1894 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
MXD-01-Coefficient-of-Friction-Tester
MXD-01 Coefficient of Friction Tester can be used for static and kinetic coefficient of friction tests to plastic films, sheets, rubber, paper, PP woven bags, fabric (fabric styles test), metal-plastic composite strip/belt for communication cable, conveyor belt, wood, coating, brake pads, windshield wiper, shoe material, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
FPT-F1-Friction-Peel-Tester
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
TDS F FM731.pdf
This technical data sheet provides information on FMF731, a double sided aluminum foil glass fiber mesh facing. The facing has a composition of 7 μm aluminum foil, 40 g/m2 LDPE adhesive, and 31 g/m2 glass fiber plain fabric with another 7 μm aluminum foil layer. Key properties include a basis weight of 100 g/m2, thickness of 0.16 mm, tensile strength of 177.8 N/25 mm MD and 165.9 N/25 mm XD, burst strength of 367.1 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. The facing comes in roll widths of 1000mm or 1200mm and lengths
Peel Strength Tester for Packaging Adhesives
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
CHY CA-Thickness-Tester
CHY-CA is based on mechanical contacting method and applicable to thickness test for plastic films, sheets,paper, foils and other materials within specified range. CHY-CA has auto sampling mechanism.
Testing strength of polymers
This PPT contains testing different mechanical properties on polymer (Lexan) for testing its strength.
TDS F FSK760.pdf
This technical data sheet provides information on FSK760 foil scrim kraft facing. It lists the composition as 7 μm aluminum foil with 8/100mm and 12/100mm tri-directional fiberglass yarn and 10 g/m2 LDPE adhesive on 60 g/m2 brown kraft. Key properties include a basis weight of 90 g/m2, thickness of 0.1 mm, tensile strength of 144.0 N/25 mm MD and 48.0 N/25 mm XD, burst strength of 30.2 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. Standard roll sizes are 1000mm, 1200mm, 1
tensile strength
Tensile testing is a fundamental materials science method where a sample is pulled apart under controlled tension until failure. It determines how materials react under tensile stress and yields data on material properties like elastic limit and failure point. This allows designers to predict how materials will perform in applications. Tensile testing provides data on material integrity and quality, helping manufacturers ensure products are fit for purpose and meet standards. The basic approach involves applying a tensile load to a specimen and measuring its elongation until fracture to determine properties like tensile strength. Factors that influence tensile strength include additives, temperature, geometry, orientation, surface condition, loading rate and environment.
MXD-01A -Coefficient-of-Friction-Tester
MXD-01A Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
TDS F FSK750.pdf
This technical data sheet provides information on FSK750 foil scrim kraft facing. It lists the composition as 7 μm aluminum foil with 8/100mm and 12/100mm tri-directional fiberglass yarn and 10 g/m2 LDPE adhesive on 50 g/m2 brown kraft. Key properties include a basis weight of 80 g/m2, thickness of 0.1 mm, tensile strength of 138.0 N/25 mm MD and 47.5 N/25 mm XD, burst strength of 30.3 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. Standard roll sizes are 1000mm, 1200mm, 1
TDS F FW780.pdf
This technical data sheet provides information on FW780, a nontear woven backed aluminum foil facing. The facing has a 7 μm aluminum foil layer bonded with 40 g/m2 LDPE adhesive to an 80 g/m2 woven cloth backing. Key properties include a basis weight of 137 g/m2, thickness of 0.15 mm, tensile and burst strengths, 97% reflectivity, and temperature resistance from -29°C to 66°C. The product is available in roll widths from 1000mm to 1280mm and lengths from 50m to 2000m. Users are advised to test the product for suitability for their intended application.
TDS F FK750.pdf
This technical data sheet provides information on FK750, a kraft backed aluminum foil facing. The facing has a 7 μm aluminum foil layer adhered to a 50 g/m2 brown kraft paper using a 10 g/m2 LDPE adhesive. Key properties include a basis weight of 77 g/m2, thickness of 0.09 mm, tensile and burst strengths, 97% reflectivity, and temperature resistance from -29°C to 66°C with no delamination. The facing is available in roll widths from 1000mm to 1300mm and lengths from 50m to 1000m. Tolerances and storage/application recommendations are also provided.
TDS F PFSK3050.pdf
This technical data sheet provides information on a polypropylene foil scrim kraft facing material. The facing consists of a black or white BOPP film, aluminum foil, fiberglass yarn, and a brown kraft paper. Key properties include a basis weight of 130 g/m2, thickness of 0.19mm, tensile strengths of 138.8 N/25mm MD and 65.9 N/25mm XD, and burst strength of 355.1 kPa. The material has low water vapor permeability and can withstand temperatures from -29°C to 66°C without delamination. It is available in roll widths from 1000mm to 1250mm, lengths from 60m to 1000m
NDT and DT
This presentation discusses non-destructive testing (NDT) and destructive testing (DT). NDT techniques like ultrasonic testing, radiography, and eddy current testing are used to evaluate materials and components without damaging them. This allows for safety, reliability, and cost-effective testing over the lifetime of a product. Destructive testing involves testing samples until failure to understand material properties and identify weaknesses. While more informative, destructive testing is not practical for mass-produced items. Both techniques have important applications in manufacturing for process and quality control.
TDS F PSK3050.pdf
This technical data sheet provides information on PSK3050-Black and PSK3050-White polypropylene scrim kraft facing materials. It lists the composition including a black or white BOPP film, fiberglass yarn, LDPE adhesive, and kraft paper. It also provides values for properties such as basis weight, thickness, tensile strength, burst strength, water vapor permeability, and temperature resistance. Standard roll sizes are also specified along with storage instructions and a contact for the manufacturer.
Fabric tensile testing machines
Fabric strength machine, universal strength machine and Material strength machine mainly used in a variety of materials with its constant speed stretching; tearing, stripping, fixed load, fixed elongation, elastic recovery rate, the top break and other test experiments.http://www.qinsun-lab.com/Products/Property/Strength/Fabric%20Tensile%20Testing%20Machines.html
TDS F FSKF750.pdf
This technical data sheet provides specifications for FSKF750, a double sided foil scrim kraft facing material. It lists the material composition including aluminum foil, fiberglass yarn, and adhesive layers. Key properties such as basis weight, thickness, tensile strength, burst strength, and reflectivity are specified. Standard roll sizes and tolerances are also outlined along with storage and testing recommendations.
CHY-CA-Thickness-Tester
CHY-CA is based on mechanical contacting method and applicable to thickness test for plastic films, sheets,paper, foils and other materials within specified range. CHY-CA has auto sampling mechanism.
CHY-CA-Electronic Manufacturing Thickness Meter
The document describes the CHY-CA Thickness Tester, a mechanical instrument for measuring the thickness of various materials like plastic films, sheets, paper, and foils. It uses a contacting method with a presser foot to apply precise pressure and ensure accurate measurements. The tester operates manually or automatically, can preset test parameters, displays real-time data, and includes functions for statistics, calibration, data transfer, and management. It is designed to conform to various international standards and can measure materials with thicknesses ranging from 0 to 2 mm or up to 6/12 mm optionally.
Hot Tack Tester for plastic packaging
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1-Friction-Peel-Tester
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
More Related Content
What's hot
MXD-01-Coefficient-of-Friction-Tester
MXD-01 Coefficient of Friction Tester can be used for static and kinetic coefficient of friction tests to plastic films, sheets, rubber, paper, PP woven bags, fabric (fabric styles test), metal-plastic composite strip/belt for communication cable, conveyor belt, wood, coating, brake pads, windshield wiper, shoe material, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
FPT-F1-Friction-Peel-Tester
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
TDS F FM731.pdf
This technical data sheet provides information on FMF731, a double sided aluminum foil glass fiber mesh facing. The facing has a composition of 7 μm aluminum foil, 40 g/m2 LDPE adhesive, and 31 g/m2 glass fiber plain fabric with another 7 μm aluminum foil layer. Key properties include a basis weight of 100 g/m2, thickness of 0.16 mm, tensile strength of 177.8 N/25 mm MD and 165.9 N/25 mm XD, burst strength of 367.1 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. The facing comes in roll widths of 1000mm or 1200mm and lengths
Peel Strength Tester for Packaging Adhesives
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
CHY CA-Thickness-Tester
CHY-CA is based on mechanical contacting method and applicable to thickness test for plastic films, sheets,paper, foils and other materials within specified range. CHY-CA has auto sampling mechanism.
Testing strength of polymers
This PPT contains testing different mechanical properties on polymer (Lexan) for testing its strength.
TDS F FSK760.pdf
This technical data sheet provides information on FSK760 foil scrim kraft facing. It lists the composition as 7 μm aluminum foil with 8/100mm and 12/100mm tri-directional fiberglass yarn and 10 g/m2 LDPE adhesive on 60 g/m2 brown kraft. Key properties include a basis weight of 90 g/m2, thickness of 0.1 mm, tensile strength of 144.0 N/25 mm MD and 48.0 N/25 mm XD, burst strength of 30.2 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. Standard roll sizes are 1000mm, 1200mm, 1
tensile strength
Tensile testing is a fundamental materials science method where a sample is pulled apart under controlled tension until failure. It determines how materials react under tensile stress and yields data on material properties like elastic limit and failure point. This allows designers to predict how materials will perform in applications. Tensile testing provides data on material integrity and quality, helping manufacturers ensure products are fit for purpose and meet standards. The basic approach involves applying a tensile load to a specimen and measuring its elongation until fracture to determine properties like tensile strength. Factors that influence tensile strength include additives, temperature, geometry, orientation, surface condition, loading rate and environment.
MXD-01A -Coefficient-of-Friction-Tester
MXD-01A Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
TDS F FSK750.pdf
This technical data sheet provides information on FSK750 foil scrim kraft facing. It lists the composition as 7 μm aluminum foil with 8/100mm and 12/100mm tri-directional fiberglass yarn and 10 g/m2 LDPE adhesive on 50 g/m2 brown kraft. Key properties include a basis weight of 80 g/m2, thickness of 0.1 mm, tensile strength of 138.0 N/25 mm MD and 47.5 N/25 mm XD, burst strength of 30.3 kPa, and 97% reflectivity with no delamination from -29°C to 66°C. Standard roll sizes are 1000mm, 1200mm, 1
TDS F FW780.pdf
This technical data sheet provides information on FW780, a nontear woven backed aluminum foil facing. The facing has a 7 μm aluminum foil layer bonded with 40 g/m2 LDPE adhesive to an 80 g/m2 woven cloth backing. Key properties include a basis weight of 137 g/m2, thickness of 0.15 mm, tensile and burst strengths, 97% reflectivity, and temperature resistance from -29°C to 66°C. The product is available in roll widths from 1000mm to 1280mm and lengths from 50m to 2000m. Users are advised to test the product for suitability for their intended application.
TDS F FK750.pdf
This technical data sheet provides information on FK750, a kraft backed aluminum foil facing. The facing has a 7 μm aluminum foil layer adhered to a 50 g/m2 brown kraft paper using a 10 g/m2 LDPE adhesive. Key properties include a basis weight of 77 g/m2, thickness of 0.09 mm, tensile and burst strengths, 97% reflectivity, and temperature resistance from -29°C to 66°C with no delamination. The facing is available in roll widths from 1000mm to 1300mm and lengths from 50m to 1000m. Tolerances and storage/application recommendations are also provided.
TDS F PFSK3050.pdf
This technical data sheet provides information on a polypropylene foil scrim kraft facing material. The facing consists of a black or white BOPP film, aluminum foil, fiberglass yarn, and a brown kraft paper. Key properties include a basis weight of 130 g/m2, thickness of 0.19mm, tensile strengths of 138.8 N/25mm MD and 65.9 N/25mm XD, and burst strength of 355.1 kPa. The material has low water vapor permeability and can withstand temperatures from -29°C to 66°C without delamination. It is available in roll widths from 1000mm to 1250mm, lengths from 60m to 1000m
NDT and DT
This presentation discusses non-destructive testing (NDT) and destructive testing (DT). NDT techniques like ultrasonic testing, radiography, and eddy current testing are used to evaluate materials and components without damaging them. This allows for safety, reliability, and cost-effective testing over the lifetime of a product. Destructive testing involves testing samples until failure to understand material properties and identify weaknesses. While more informative, destructive testing is not practical for mass-produced items. Both techniques have important applications in manufacturing for process and quality control.
TDS F PSK3050.pdf
This technical data sheet provides information on PSK3050-Black and PSK3050-White polypropylene scrim kraft facing materials. It lists the composition including a black or white BOPP film, fiberglass yarn, LDPE adhesive, and kraft paper. It also provides values for properties such as basis weight, thickness, tensile strength, burst strength, water vapor permeability, and temperature resistance. Standard roll sizes are also specified along with storage instructions and a contact for the manufacturer.
Fabric tensile testing machines
Fabric strength machine, universal strength machine and Material strength machine mainly used in a variety of materials with its constant speed stretching; tearing, stripping, fixed load, fixed elongation, elastic recovery rate, the top break and other test experiments.http://www.qinsun-lab.com/Products/Property/Strength/Fabric%20Tensile%20Testing%20Machines.html
TDS F FSKF750.pdf
This technical data sheet provides specifications for FSKF750, a double sided foil scrim kraft facing material. It lists the material composition including aluminum foil, fiberglass yarn, and adhesive layers. Key properties such as basis weight, thickness, tensile strength, burst strength, and reflectivity are specified. Standard roll sizes and tolerances are also outlined along with storage and testing recommendations.
What's hot (17)
Similar to Thin film thickness Tester, Thickness Measurement
CHY-CA-Thickness-Tester
CHY-CA is based on mechanical contacting method and applicable to thickness test for plastic films, sheets,paper, foils and other materials within specified range. CHY-CA has auto sampling mechanism.
CHY-CA-Electronic Manufacturing Thickness Meter
The document describes the CHY-CA Thickness Tester, a mechanical instrument for measuring the thickness of various materials like plastic films, sheets, paper, and foils. It uses a contacting method with a presser foot to apply precise pressure and ensure accurate measurements. The tester operates manually or automatically, can preset test parameters, displays real-time data, and includes functions for statistics, calibration, data transfer, and management. It is designed to conform to various international standards and can measure materials with thicknesses ranging from 0 to 2 mm or up to 6/12 mm optionally.
Hot Tack Tester for plastic packaging
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1-Friction-Peel-Tester
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
Disk Stripping Tester
BLJ-02 Disk Stripping Tester is professionally applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coated films, surface coating and composite.
CHY-C2A-Thickness Tester
CHY-C2A is based on contacting method and provides accurate and precise thickness measurement for plastic films, sheets, paper, foils, silicon wafers and sheetings. Test results will display in real time along with max, min and average value.
CHY-C2A -Thickness Tester for Plastic Film
CHY-C2A Thickness Tester is designed based on mechanical contacting method, which effectively ensures standard and accurate test data and is applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
CHY C2A-Thickness-Tester
CHY-C2A is based on contacting method and provides accurate and precise thickness measurement for plastic films, sheets, paper, foils, silicon wafers and sheetings. Test results will display in real time along with max, min and average value.
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier materials, back-sheets, sheeting, aluminum foils, waterproof materials, and other materials used in sanitary and medical industry. By testing the water vapor transmission rate, the technical indexes of materials could be controlled to meet the requirements for production.
Xlw pc-auto-tensile-tester
XLW (PC) Auto Tensile Tester can be used to determine physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage (plaster) etc.
Thickness tester for plastic films and paper
The PARAM® CHY-CB Thickness Tester uses a mechanical contacting method to test thickness accurately according to various standards. It has manual or automatic modes, displays test data, and is designed for testing films, paper, foils, and other materials. The tester utilizes an embedded computer system for reliable operation and data management without a separate PC. It also has an intelligent software interface and supports a data sharing system for uniform management of test reports and results.
Water Vapor Transmission Rate Tester
This instrument is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes, and the testing process is completely automatic and conforms to international standards.
XLW-G6-Auto-Tensile-Tester
This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
BLD-200N-Auto-Stripping-Tester
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
BLD-200N-Auto-Stripping-Tester
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
Bld-200N-Bonding-Force-Tester
BLD-200N Bonding Force Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protection films, release paper, laminated films, leatheroid, woven bags and paper.
TDS F FM1831.pdf
This technical data sheet provides information on FM1831 glass fiber cloth backed aluminum foil facing. The facing has an 18 μm aluminum foil layer adhesive bonded to a 31 g/m2 glass fiber plain fabric with 35 g/m2 LDPE adhesive. Key properties include a basis weight of 116 g/m2, thickness of 0.17 mm, tensile strength of 201.2 N/25 mm MD and 188.6 N/25 mm XD, burst strength of 399.1 kPa, 97% reflectivity, and no delamination from -29°C to 66°C. The product is available in roll widths from 1000mm to 1200mm and lengths from 50m to 2000m.
TDS F FG795.pdf
FG795 is a glass fiber cloth backed aluminum foil facing with the following properties:
- It has a 7 μm thick aluminum foil layer adhered to a 95 g/m2 glass fiber plain fabric with 40 g/m2 LDPE adhesive.
- It has a basis weight of 152 g/m2, thickness of 0.14 mm, and provides high tensile strength, burst strength, and reflectivity.
- It is available in roll widths from 1000mm to 1300mm and lengths from 50m to 2000m.
Falling Dart Impact Tester
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
Similar to Thin film thickness Tester, Thickness Measurement (20)
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
More from Labthink Instruments Co., Ltd
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers.
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
This document shows a 90 degree adhesive peel strength test on a Labthink XLW (PC) Auto Tensile Tester. We fit the XLW(PC) with our 90 degree peel strength fixture and one vise grip on the bottom crosshead to hold the free end of the tape. The fixture has numerous tapped holes that allow you to clamp a multitude of various parts and substrates to the test bed. This test measures the maximum load and also the average load of adhesive tape bonded to a Polystyrene foam substrate.
Plastic film hot tack test
The i-Thermotek 2500 Hot Tack Tester can determine the hot tack and heat seal performance of plastic films, composite films, and other packaging materials. It can also test the peel strength and tensile properties of adhesives, tapes, and other flexible materials. The tester prepares specimens according to standards, mounts them in grips, sets test parameters, and records data from tests that measure properties like peel strength and tensile strength.
Plastic film hot tack test
The i-Thermotek 2500 Hot Tack Tester can determine the hot tack and heat seal performance of plastic films, composite films, and other packaging materials. It can also test the peel strength and tensile properties of adhesives, tapes, and other flexible materials. The tester prepares specimens according to standards, mounts them in grips, sets test parameters, and records data from tests that measure properties like peel strength and tensile strength.
Medical blister leak and seal strength test
i-Leaktek 6600 Leak and Seal Strength Tester is designed for determination of seal strength and seal performance test of various heat sealed flexible package and sterilized package, seal performance test of pilfer-proof closures, quantitative testing of leak characteristics, compression resistance, capsule disengaging strength, cap body joint strength, seal-edge seal strength and butting strength of flexible tubes, and testing of anti-compression, seal performance and burst resistance of the bottles.
Medical blister leak and seal strength test
The i-Leaktek 6600 Leak and Seal Strength Tester is designed to test the seal strength and performance of various flexible packages and sterilized packages. It can test leak characteristics, compression resistance, and burst resistance of bottles. The tester requires warming up for 30 minutes before mounting at least 5 specimen samples free of defects. Test parameters are then set and the test is run, with the results curve and report viewed afterwards.
Break force test of ampoule bottle
i-Meditek 1300 Medical Packaging Tester is designed to determine the puncture force of medical rubber closure, pullout force of rubber closure, break force of ampoule, sliding resistance of syringe, puncture force of syringe needle, connection force of syringe needle and needle hub, connection force of syringe needle hub and shield, seal performance of plastic blood bag, and the performance of other medical appliances.
Xlw (g6) auto tensile tester
The PARAM® XLW (G6) Auto Tensile Tester is a professional instrument that can perform a variety of tensile tests including tensile strength, deformation, peeling and tearing. It has 6 working stations, 1200mm extra-long stroke, and precision load cells that ensure accurate test results. The instrument is controlled via computer software which supports statistical analysis and management of test data. It is used to test properties of over 1000 materials including packaging, textiles, adhesive tapes and more.
Ft f1 fogging tester
The PARAM FT-F1 Fogging Tester is used to evaluate the fogging characteristics of volatile constituents in plastics, textiles, and other materials used in vehicles and aircraft under high temperature conditions. It has 6 test stations that can simultaneously test samples and controls. Test methods include heating samples and measuring changes in gloss, fogging, or condensed material weight on a cooled plate. The instrument conforms to international standards and is suited to testing fogging in vehicle interior parts, plastics, carpets, leather, insulation materials, and adhesive products.
Box Compression Tester
XYD-15K Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks (for edible oil and mineral water), paper tanks, paper cases, IBC tanks and other packages.
Xyd 15 k
XYD-15K Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks (for edible oil and mineral water), paper tanks, paper cases, IBC tanks and other packages.
Tensile strength at break tester
XLW (PC) Auto Tensile Tester is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (better than 0.5% of reading accuracy) and multiple test ranges. The instrument is designed with 7independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions.
Tension and Elongation rate tester
1% of reading value effectively ensures the accuracy of test results
7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages
Different ranges of load cells and 7 distinct test speeds to meet different test requirements
The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
Material universal testing machine
Better than 0.5% of reading value effectively ensures accurate test results
Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed
1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate
Puncture strength tester for packaging
XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminum foil, diaphragm, back sheets, non-woven fabrics, rubber, and paper, and etc.
Tensile Tester
1% of reading value effectively ensures the accuracy of test results
2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users
3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available.
Tensile strength testing machine for flexible materials
1% of reading value effectively ensures the accuracy of test results7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packagesDifferent ranges of load cells and 7 distinct test speeds to meet different test requirements
water vapor permeability tester for flexible packaging
This instrument is based on the cup method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes and the testing process is completely automatic and conforms to international standards.
More from Labthink Instruments Co., Ltd (20)
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
Tensile strength testing machine for flexible materials
Tensile strength testing machine for flexible materials
water vapor permeability tester for flexible packaging
water vapor permeability tester for flexible packaging
Thin film thickness Tester, Thickness Measurement
- 1. Contact: Yarina Gao Email: trade5@labthink.cn Phone:086-531-85060139 CHY-CA THICKNESS MEASURING INSTRUMENT Applications: Plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range Standards:: ISO 4593, ISO 534, ISO 3034, ASTM D645, ASTM D374, ASTM D1777, TAPPI T411, DIN 53105, DIN 53353, JIS K6250, JIS K6328, JIS K6783, JIS Z1702, BS 3983, BS 4817, GB/T 6672, GB/T 451.3, GB/T 6547 Features: Real time display of Maximum, Minimum and Average data Mechanical Contact method Manual or automatic operating mode High testing Accuracy and resolution Technical Specifications: Specifications CHY-CA Test Range 0 ~ 12mm Accuracy 0.1 micron Specimen Feeding Interval 0 ~ 1000mm Specimen Feeding Speed 0.1 ~ 99.9 mm/s Contact: Yarina Gao Email: trade5@labthink.cn Phone:086-531-85060139