Teebotmax Open Source 3D printer, By Emmanuel Adetutu

1. TeeBotMax
Open source 3D printer
Design & Developed by: Emmanuel .A. Adetutu
Eindhoven, The Netherlands

2. Key features
 Foldable
 Readily available materials
 Easy to assemble (Detail assembly guide)
 Affordable
 High print quality.

3. Foldable

4. Readily available materials
 Frame 20mm X 20mm Aluminum Profile (Source: Gamma, Praxis, Groenen)
 8mm smooth Rods, 8mm Linear bearing (Source: Reprap stores, Ebay)
 Electronics (Ramps 1.4 with LCD control)
 Motors: Nema 17 Stepper motors 5pcs

5. Easy to assemble
 The whole Mechanical frame can be put together in 2-3 hours.
 Electronics, wiring, fine tuning 4-8 hours


6. Assembly Guide

7. Cheap
 Depending on source, material type and technical skill
 300Euro ----1000 Euro

8. High print quality
 No Compromise!!
 Layer heights from 0.2 – 0.5
 Fast print time (Direct drive )

15. Make design’s using your Smartphone, tablets
or Pc and print wirelessly using the Doodle 3D
Comes with free app.

17. Sources:
 Github: STL files/Manual
 https://github.com/EmmanuelAdetutu/TeeBotMax
Buy Diy kits/Materials:
 www.3dstuffs.nl
Follow on goggle + Photos and more on this link…:
Emmanuel Adetutu blog here
Follow on twitter