This report covers patent analysis on types and application areas of fiber optic sensors, their research trends and key intellectual property indicators. This article was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis.
SCALABILITY CONCERNS OF CHIRP SPREAD SPECTRUM FOR LPWAN APPLICATIONSijasuc
Divergent modulation schemes have been proposed for the Internet of Things (IoT). Low Power Wide Area
Networks (LPWAN) technologies are gaining unprecedented acceptance in IoT application of sensor
networks. Chirp Spread Spectrum (CSS) is a prominent modulation technique proposed for LPWAN. Chirps
can traverse long distance and are resilient to noise and Doppler effects. Noise resilience along with
transmission range and low power requirement makes CSS a preferred modulation scheme for sensor
networks. LoRaWANTM, with its physical (PHY) layer using CSS, has emerged as the widely accepted
LPWAN solution. By using CSS modulation with orthogonal spreading factors (SF), LoRa offers wide
coverage to LPWAN applications while supporting a high volume of devices. However, scalability
performance of CSS has not been inadequately modeled. As with the suitability of the modulation scheme,
there are concerns on how chirps interact with the surrounding as the number of deployments bursts out
into higher volumes. We evaluate CSS at ISM band 868 MHz for spreading factor 7 to 12 at bandwidth 125
kHz for performance and scalability. Simultaneous transmissions were simulated with repeated iterations
and conclusions are arrived on collisions rate, packet error rate, and bit error. Suitability of using CSS for
sensor networks for future deployments is commended.
A Study on the ZigBee Wireless Communication for IAQ Monitoring of Undergroun...ijtsrd
In this paper, the 424MHz ZigBee module, which uses a relatively lower frequency for wireless transmission and reception, is found to have a much higher data transfer rate than that of the 2.4GHz XBee PRO in the presence of obstacles such as subway waiting rooms, platform like stairs, complicated structures, and crowded passengers. This indicates that low frequency radio waves have better diffraction characteristics and thus better performance in face of obstacles. Therefore, it was found that low frequency Zigbee modules are advantageous in areas with complex structures such as subways. Tae-In Hyon | Gyu-Sik Kim "A Study on the ZigBee Wireless Communication for IAQ Monitoring of Underground Subway Stations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26820.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26820/a-study-on-the-zigbee-wireless-communication-for-iaq-monitoring-of-underground-subway-stations/tae-in-hyon
What is VLC
Visible light & Spectrum
VLC process
-Transmitter
-Receiver
-Modulation
VLC characteristics
Comparison with RF & IR
Demerits of VLC
Applications
SCALABILITY CONCERNS OF CHIRP SPREAD SPECTRUM FOR LPWAN APPLICATIONSijasuc
Divergent modulation schemes have been proposed for the Internet of Things (IoT). Low Power Wide Area
Networks (LPWAN) technologies are gaining unprecedented acceptance in IoT application of sensor
networks. Chirp Spread Spectrum (CSS) is a prominent modulation technique proposed for LPWAN. Chirps
can traverse long distance and are resilient to noise and Doppler effects. Noise resilience along with
transmission range and low power requirement makes CSS a preferred modulation scheme for sensor
networks. LoRaWANTM, with its physical (PHY) layer using CSS, has emerged as the widely accepted
LPWAN solution. By using CSS modulation with orthogonal spreading factors (SF), LoRa offers wide
coverage to LPWAN applications while supporting a high volume of devices. However, scalability
performance of CSS has not been inadequately modeled. As with the suitability of the modulation scheme,
there are concerns on how chirps interact with the surrounding as the number of deployments bursts out
into higher volumes. We evaluate CSS at ISM band 868 MHz for spreading factor 7 to 12 at bandwidth 125
kHz for performance and scalability. Simultaneous transmissions were simulated with repeated iterations
and conclusions are arrived on collisions rate, packet error rate, and bit error. Suitability of using CSS for
sensor networks for future deployments is commended.
A Study on the ZigBee Wireless Communication for IAQ Monitoring of Undergroun...ijtsrd
In this paper, the 424MHz ZigBee module, which uses a relatively lower frequency for wireless transmission and reception, is found to have a much higher data transfer rate than that of the 2.4GHz XBee PRO in the presence of obstacles such as subway waiting rooms, platform like stairs, complicated structures, and crowded passengers. This indicates that low frequency radio waves have better diffraction characteristics and thus better performance in face of obstacles. Therefore, it was found that low frequency Zigbee modules are advantageous in areas with complex structures such as subways. Tae-In Hyon | Gyu-Sik Kim "A Study on the ZigBee Wireless Communication for IAQ Monitoring of Underground Subway Stations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26820.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26820/a-study-on-the-zigbee-wireless-communication-for-iaq-monitoring-of-underground-subway-stations/tae-in-hyon
What is VLC
Visible light & Spectrum
VLC process
-Transmitter
-Receiver
-Modulation
VLC characteristics
Comparison with RF & IR
Demerits of VLC
Applications
Review Paper on Wireless Sensor Body Area Networkijtsrd
In this research work, we propose a reliable, power efficient and high throughput routing protocol for Wireless Body Area Networks WBANs . We use multi hop topology to achieve minimum energy consumption and a longer network lifetime. We propose a cost function to select the parent node or forwarder. Pro posed cost function selects a parent node which has high residual energy and minimum distance to sink. Residual energy parameter balances the energy consumption among the sensor nodes while the distance parameter ensures successful packet delivery to sink. Pawan Kumar Verma | Preeti Sondhi "Review Paper on Wireless Sensor Body Area Network" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26437.pdfPaper URL: https://www.ijtsrd.com/computer-science/computer-network/26437/review-paper-on-wireless-sensor-body-area-network/pawan-kumar-verma
NB-IoT VS Lora
This article is talking about NB-IoT VS Lora, comparative analysis of NB-IoT and Lora technology.
The rapid development of the Internet of Things puts forward higher requirements for wireless communication technology. The LPWAN (low-power Wide-Area Network) is also rapidly emerging.
IoT applications need to consider many factors, such as node costs, network costs, battery life, data transmission rate (throughput), latency, mobility, network coverage, and deployment types. It can be said that no single technology can meet all IoT requirements demand.
NB-IoT and LoRa have different technical and commercial characteristics and are also the two most promising low-power wide-area network communication technologies.
Both of these LPWAN technologies have the characteristics of wide coverage, multiple connections, low speed, low cost, and low power consumption. Both are suitable for low-power IoT applications and are actively expanding their ecosystems.
Analysis Of Ofdm Parameters Using Cyclostationary Spectrum SensingOmer Ali
Defining Software Defined Radios, Cognitive Radios, the need for spectrum sensing and an insight on the Cyclostationary parameters that better help in feature detection in Cognitive Radios
Lase Optics What are Fiber Optic Sensors and Its Applications.docx.pdfLase Optics
Fiber-based sensors known as fiber optic sensors employ optical fibers to measure a variety of physical parameters, including mechanical strain, temperature, chemical species concentrations, rotations, pressure, vibrations, and displacements.
Antenna for 5G patent landscape 2019 flyerKnowmade
Report’s Key Features
• PDF >120 slides
• Excel file >3,600 patents
• IP trends, including time-evolution of published patents, and countries of patent filings
• Ranking of main patent assignees
• Patent analysis for main applications (handsets, infrastructures & networks, vehicles) and technologies (MIMO, beamforming, antenna array, mm-wave, monopole antenna, dipole antenna, microstrip antenna, etc.)
• Key patents
• Key players’ IP position, and relative strength of their patent portfolios
• Key players’ IP profile: Samsung Electronics, Oppo Mobile, Huawei, and Intel
• Excel database containing all patents analyzed in this report, including technology and application segmentations
Review Paper on Wireless Sensor Body Area Networkijtsrd
In this research work, we propose a reliable, power efficient and high throughput routing protocol for Wireless Body Area Networks WBANs . We use multi hop topology to achieve minimum energy consumption and a longer network lifetime. We propose a cost function to select the parent node or forwarder. Pro posed cost function selects a parent node which has high residual energy and minimum distance to sink. Residual energy parameter balances the energy consumption among the sensor nodes while the distance parameter ensures successful packet delivery to sink. Pawan Kumar Verma | Preeti Sondhi "Review Paper on Wireless Sensor Body Area Network" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26437.pdfPaper URL: https://www.ijtsrd.com/computer-science/computer-network/26437/review-paper-on-wireless-sensor-body-area-network/pawan-kumar-verma
NB-IoT VS Lora
This article is talking about NB-IoT VS Lora, comparative analysis of NB-IoT and Lora technology.
The rapid development of the Internet of Things puts forward higher requirements for wireless communication technology. The LPWAN (low-power Wide-Area Network) is also rapidly emerging.
IoT applications need to consider many factors, such as node costs, network costs, battery life, data transmission rate (throughput), latency, mobility, network coverage, and deployment types. It can be said that no single technology can meet all IoT requirements demand.
NB-IoT and LoRa have different technical and commercial characteristics and are also the two most promising low-power wide-area network communication technologies.
Both of these LPWAN technologies have the characteristics of wide coverage, multiple connections, low speed, low cost, and low power consumption. Both are suitable for low-power IoT applications and are actively expanding their ecosystems.
Analysis Of Ofdm Parameters Using Cyclostationary Spectrum SensingOmer Ali
Defining Software Defined Radios, Cognitive Radios, the need for spectrum sensing and an insight on the Cyclostationary parameters that better help in feature detection in Cognitive Radios
Lase Optics What are Fiber Optic Sensors and Its Applications.docx.pdfLase Optics
Fiber-based sensors known as fiber optic sensors employ optical fibers to measure a variety of physical parameters, including mechanical strain, temperature, chemical species concentrations, rotations, pressure, vibrations, and displacements.
Antenna for 5G patent landscape 2019 flyerKnowmade
Report’s Key Features
• PDF >120 slides
• Excel file >3,600 patents
• IP trends, including time-evolution of published patents, and countries of patent filings
• Ranking of main patent assignees
• Patent analysis for main applications (handsets, infrastructures & networks, vehicles) and technologies (MIMO, beamforming, antenna array, mm-wave, monopole antenna, dipole antenna, microstrip antenna, etc.)
• Key patents
• Key players’ IP position, and relative strength of their patent portfolios
• Key players’ IP profile: Samsung Electronics, Oppo Mobile, Huawei, and Intel
• Excel database containing all patents analyzed in this report, including technology and application segmentations
Since 2017, Knowmade has been following the intellectual property (IP) trends related to RF front-end devices and their packaging. Recently, Knowmade witnessed increasing patenting activity related to PAMiD modules, RF front-end modules, RF filters and switch integration, and antennas for 5G and their packaging. Packaging of 5G systems requires the integration of RF, analog and digital functions along with passives and other system components in a single module. These systems exemplify the heterogeneous integration trend which becomes more important for 5G. Proximity of the transceiver and front-end module is also important, to reduce size and loss. This is achieved by integrating antennas with the RF module as well as simultaneous modeling of a heat dissipation solution to keep active components in acceptable thermal conditions. In the mm-wave antenna-in-package solutions, interconnections between transceiver ICs and antennas should result in low insertion loss and acceptable return loss over the frequency range of interest. The other key requirement is the form factor, and to meet it the industry is progressively moving from conventional interconnect techniques such as wire-bonding and flip-chip interconnections to emerging techniques referred to as Fan-Out packaging or ICembedding. Flip-chip and Fan-out interconnections were originally developed for highperformance computing or mobile processor applications, but their fine pitch and low electrical parasitic have pushed RF players to use them in their RF/mm-wave modules. Today, these approaches are getting more and more critical for the RF industry and are used in antenna-integrated modules. In this report, Knowmade analyzes the patent landscape related to antenna integrated in package (AiP, AoP). The AiP patent landscape is led by major semiconductor foundries and OSATs, SJ Semiconductor (SJSemi) being the main patent assignee, and it includes any links in the supply chain. Foundries/OSATs (SJSemi/SMIC, TSMC, SEMCO, ASE, SPIL) as well as IDMs/fabless (MediaTek, Qualcomm, Murata, TI, Skyworks) and OEMs (Huawei, Vivo mobile, Oppo mobile) have filed AiP-related patents to protect their structures/designs or manufacturing methods
The multiple applications (Forest, Industrial, Home) sector being the backbone of the security system. Security systems which are being used now a day are not smart enough to provide real time notification after sensing the problem. This Project is very useful in industrial monitoring system, forest safety and controlling an application. The Processing Sensor analysis of PIR sensors, Fire, air, temp sensors based multiple sector Analysis industrial, human identification and Any Identification Indicate LCD Display and Web camera Based Any Problem Capture Stored Image Data base. In the present work a PIC Microcontroller based the remote irrigation system is developing for the multiple process. The microcontroller use to controlling and displaying the resultant sensor values LCD Display Identifying System.
Cognitive Radio Networks: a comprehensive study on scope and applicationsAM Publications
The work aims to investigate into the modern concept of cognitive radio and details about its functioning.
The ideas that led to its invention and the thoughts that led to this modern technology of using white spaces in the
most efficient way. It aims to take a dig into the earlier radios namely the conventional radio and the software defined
radio and later on modifications of those that ultimately led to cognitive radio. Not only that but it deals with every
nuance between each of them. Various persons including the person who was the propagator of the concept of
cognitive radio technology Dr. Joseph Mitola and various organizations have tried to define cognitive radio and the
discussion considers all those definitions to let the reader get a clear picture regarding their understanding as far as
defining cognitive radio is concerned. The requirements of cognitive radio in various fields and the future scope of the
technology are profoundly dealt with. A network of cognitive radios known as cognitive radio network (CRN) is also
the matter of discussion in the latter half of the work. Various components of the CRN and certain details regarding it
are included with appropriate diagrams as per requirements
A fiber that has a width of less than 1000 nanometers (1000 nm or 1 μm) is generally defined as a nano fiber. A nanoparticle is defined as a small group of atoms or molecules with a radius of less than 100 nanometers (100 nm).Particles on the nanoscale have a very high surface area to volume ratio, whereas this ratio is much lower for objects on the macroscopic scale.
Nanofabrics are textiles engineered with small particles that give ordinary materials advantageous properties such as superhydrophobicity, odor and moisture elimination, increased elasticity and strength, and bacterial resistance. Depending on the desired property, a nanofabric is either constructed from nanoscopic fibers called nano fibers, or is formed by applying a solution containing nanoparticles to a regular fabric.
Applications of nanofabrics have the potential to revolutionize textile manufacturing and areas of medicine such as drug delivery and tissue engineering.
This report looks at the patenting activity around nanofabric processes, different applications and highlights the key companies involved, patents were categorized as per key processes and applications and highlights the key companies involved.
This report takes a look into the patenting activity around thin film batteries uncovering the inventors, the companies and key technologies.This report focuses on how Patent data can help uncover the trends, gaps and opportunities that exist around this area. You will find the information on the research activity, existing & emerging trends in the different technological advancements in thin film batteries.This report was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis activities.
An IOT Project Integrated with RFID and GPRSIJMTST Journal
In current scenario there is no security for the students and parents find difficulty to monitor the safety of the children when they move to school. Children may hold wrong bus or they may get down at wrong stop they may left behind the school or in the bus or they might simply skip the classes. In schools attendance were taken manually that kills the time for the teacher to call each student name and mark the attendance This project is very useful for the schools administrator to keep track of each and every student and look after their security. The main purpose of this project is to give the security for the students and to give the information for their parents to reduce their work and to reduce the burden involved in day-to-day activity of the teacher by taking the attendance. This software helps in reduce the hacking of the password and it is stored in the encrypted form. This development provides user friendliness. The main benefit of this project is for the administrator and also for the parents to reduce their burden. The project can be accessed by the authenticated users only and its dashboard helps the administrator to know about the student who is present for the class. It will notify the date and time of the student got into the bus so that it will helps the parents to know about the student information. Each module is made up of several supportive models performing various operations.
This report categorizes and graphically analyzes research trends around nanofabrics and the
processes involved and its applications from various perspectives and highlights the key
companies involved.
The use of nanoparticles and nanofibers to produce specialized nanofabrics became a subject of
interest after the sol-gel and electrospinning techniques were fully developed in the 1980s.
Since 2000, dramatic increases in global funding have accelerated research efforts in
nanotechnology, including nanofabrics research.
This report categorizes and graphically analyzes research trends around 3D printing and the
processes involved and its applications from various perspectives and highlights the key
companies involved.
For all the potential in the industry, however, not all 3D printing companies will see the same
levels of success. Jefferies rates 3D Systems and Stratasys at the top of the sector, with the
former edging out the latter for supremacy.
This report categorizes and graphically analyzes research trends around nanofabrics and the
processes involved and its applications from various perspectives and highlights the key
companies involved.
The use of nanoparticles and nanofibers to produce specialized nanofabrics became a subject of
interest after the sol-gel and electrospinning techniques were fully developed in the 1980s.
Since 2000, dramatic increases in global funding have accelerated research efforts in
nanotechnology, including nanofabrics research.
The purpose of this report on Food Safety Testing is to provide insights into the large and ever
growing food testing market and also covers the different testing technologies adopted worldwide.
With outbreaks and contamination like salmonella, E. coli, listeria, and many more the food testing
market has grown at a rapid pace. Testing concerns as well as this rapidly growing international
trade in food has stimulated the demand for more food safety testing all over the world and has led
to technological innovation in areas such as rapid testing and new test technologies such as PCR,
Biosensors, Chromatography. Etc.
Patent Anlaysis Report - Miniature drug delivery systemsPrashant Nair
This report takes a look into the patenting activity around miniature/smart drug delivery system, uncovering the key companies, inventors, and different sub categories.
PatSeer™ is a Web 2.0 patent research platform that is poised to change how patent professionals collaborate on patent projects. It includes a global patent database comprising 60 million plus records along with many calculated fields for superior research.
Innovations in food and medicine packagingPrashant Nair
This report takes a look into the patenting activity around innovations in food and medical packaging uncovering the companies, inventors, intellectual property trends and other key indicators. It focuses on how Patent data can help uncover the trends, gaps and opportunities that exist around this area. You will find the information on the research activity, packaging types, the companies most active in this research area, the filings spread, key comparisons etc. In contour, records are placed based on their contextual similarity shared with neighboring records. Closer the clusters, more is the overlap or correlation between them.
This report was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis.
Technology iNSIGHT Report - Knee Problems Diagnosis and TreatmentsPrashant Nair
This report takes a look into the patenting activity uncovering the inventors, the companies and the intellectual property history behind different knee anatomy, its research momentum and key intellectual property indicators. Knee is one of the most important joints of our body. It plays an essential role in movement related to carrying the body weight in horizontal (running and walking) and vertical (jumps) directions. Knee joint is made up of bone, cartilage, ligaments and fluid. Muscles and tendons help the knee joint move. Knee is a pivotal hinge joint, which permits flexion and extension as well as a slight medial and lateral rotation. Since in humans the knee supports nearly the whole weight of the body, it is vulnerable to different injuries. Knee is composed of three functional compartments: the femoropatellar articulation consists of the patella, or "kneecap", and the patellar groove on the front of the femur through which it slides; and the medial and lateral femorotibial articulations linking the femur, or thigh bone, with the tibia, the main bone of the lower leg. The joint is bathed in synovial fluid which is contained inside the synovial membrane called the joint capsule. Overall, the research and development work related to the crutiate ligament appears to be a highly active and growing one. This report focuses on how Patent data can help uncover the trends, gaps and opportunities that exist around this area. You will find the information on the research activity, problem areas, the companies most active in this research area, the filings spread, key comparisons etc. This report was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis activities.
The report covers patent analysis on types and application areas of robotic arms, their research trends and key intellectual property indicators. This article was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis.
This report covers patent analysis on types and application areas of probiotics, their research trends and key intellectual property indicators. This article was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis.
This report covers patent analysis on the use and application of fuel additives, its research momentum and key intellectual property indicators. Additives have been developed to increase combustion rates, as anti oxidants, to effect burn rates, to enable fuels to work under extreme temperatures, reduce harmful emissions and more. Patent data reveals various organizations have focused their research across different categories and application areas of additives with some working on the cleaning properties, some on the anti oxidation properties and others having more research around catalysts. This report focuses on how Patent data can help uncover the trends, gaps and opportunities that exist around this area. You will find the information on the research activity, the companies most active in this research area, the filings spread, key comparisons etc. This report was prepared by mining patent data using Patent iNSIGHT Pro, a comprehensive patent analysis platform that helps one accelerate time-to-decision from patent analysis activities.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.