Thirteen (13) years of experience in piping engineering work for oil and gas, chemical, petrochemical and power plant industries. The experience covers both onshore and offshore works for feasibility study, conceptual design, basic engineering, and detail design and administration of 3D CAD tools (PDMS, E3D, SP3D, PDS).
I have been involved and worked in overseas such as: Japan, Brazil and Malaysia.
Positions of Responsibility are Piping Engineer / PDMS Administrator in TechnipFMC. Experience in various position including: Piping Engineer, Piping Designer, PDMS administrator, E3D Administrator, SP3D Administrator.
Knowledge in international codes and standards like ASME, API, ASTM, Shell DEP.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
Resume of Jitendra Shende for the post of Piping EngineerJitendra Shende
Jitendra S. Shende has over 11 years of experience in piping engineering and 3D modeling software like SP3D, PDMS, MDS, and AutoPLANT. He is currently working as a PDMS Coordinator for Japan Gas Corporation in Thailand, where he is responsible for incorporating field changes, preparing piping layouts and isometrics, and managing the PDMS team. Previously he has worked on projects in Thailand, Oman, UK, South Africa, and India for companies like iGATE, Rolta India, Sasol, and Reliance. He holds a B.E. in Chemical Engineering and is proficient in software like AutoCAD, Navisworks, and SolidWorks.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
Libin Sebastian has over 8 years of experience as a piping engineer working in oil, gas, and petrochemical projects. He has expertise in engineering, fabrication, and construction according to ASTM standards and ASME B31.3 codes. Sebastian's most recent role was as a piping engineer for the SADARA project in Saudi Arabia, where he was responsible for engineering, construction, testing, and system turnover of over 8,500 linear meters of piping systems. He also has experience working in the UAE on projects such as gas pipelines and offshore platforms.
Curriculum vitae contractor civil engineer - Amir Mohammed
This curriculum vitae is for Amir Sajid, an Indian civil engineer seeking a position as a construction or project manager. He has over 29 years of experience managing construction projects in Saudi Arabia and holds masters and bachelor's degrees in civil engineering. His experience includes managing projects such as residential buildings, hospitals, power plants, pipelines, and transportation infrastructure. He is proficient in construction management skills like scheduling, procurement, and quality control.
Habeeb Omer is a mechanical engineer from India seeking a position as an MEP engineer. He has over 6 years of experience in infrastructure projects in Saudi Arabia and India. His experience includes planning, coordinating, and supervising plumbing, fire protection, drainage, and water supply systems. He is proficient in AutoCAD, MS Office, and has strong communication and teamwork skills.
Sandip Karmakar has over 5 years of experience managing piping fabrication, erection, and commissioning projects in India and Bangladesh. He has expertise in piping design, material procurement, budgeting, scheduling, and ensuring quality standards. Currently, he is the Site Execution Engineer for a 360 MW power plant project in Bangladesh, overseeing fuel oil and fire protection piping installation.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
Resume of Jitendra Shende for the post of Piping EngineerJitendra Shende
Jitendra S. Shende has over 11 years of experience in piping engineering and 3D modeling software like SP3D, PDMS, MDS, and AutoPLANT. He is currently working as a PDMS Coordinator for Japan Gas Corporation in Thailand, where he is responsible for incorporating field changes, preparing piping layouts and isometrics, and managing the PDMS team. Previously he has worked on projects in Thailand, Oman, UK, South Africa, and India for companies like iGATE, Rolta India, Sasol, and Reliance. He holds a B.E. in Chemical Engineering and is proficient in software like AutoCAD, Navisworks, and SolidWorks.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
Libin Sebastian has over 8 years of experience as a piping engineer working in oil, gas, and petrochemical projects. He has expertise in engineering, fabrication, and construction according to ASTM standards and ASME B31.3 codes. Sebastian's most recent role was as a piping engineer for the SADARA project in Saudi Arabia, where he was responsible for engineering, construction, testing, and system turnover of over 8,500 linear meters of piping systems. He also has experience working in the UAE on projects such as gas pipelines and offshore platforms.
Curriculum vitae contractor civil engineer - Amir Mohammed
This curriculum vitae is for Amir Sajid, an Indian civil engineer seeking a position as a construction or project manager. He has over 29 years of experience managing construction projects in Saudi Arabia and holds masters and bachelor's degrees in civil engineering. His experience includes managing projects such as residential buildings, hospitals, power plants, pipelines, and transportation infrastructure. He is proficient in construction management skills like scheduling, procurement, and quality control.
Habeeb Omer is a mechanical engineer from India seeking a position as an MEP engineer. He has over 6 years of experience in infrastructure projects in Saudi Arabia and India. His experience includes planning, coordinating, and supervising plumbing, fire protection, drainage, and water supply systems. He is proficient in AutoCAD, MS Office, and has strong communication and teamwork skills.
Sandip Karmakar has over 5 years of experience managing piping fabrication, erection, and commissioning projects in India and Bangladesh. He has expertise in piping design, material procurement, budgeting, scheduling, and ensuring quality standards. Currently, he is the Site Execution Engineer for a 360 MW power plant project in Bangladesh, overseeing fuel oil and fire protection piping installation.
Kiran Kumar Reddy has over 8 years of experience as a planning/schedule engineer. He has extensive experience using Primavera P6 and MS Project to plan large EPC projects in multiple industries. Some of the key projects he has worked on include DAP, phosphoric acid, and steam power plants in Morocco and olefins projects in Saudi Arabia. He is skilled at establishing baselines, monitoring progress, identifying delays, and ensuring timely project completion through scheduling.
Sanoop Ashraf is a mechanical engineer with over 6 years of experience in installation, supervision, testing, and commissioning of HVAC, plumbing, drainage, and fire fighting systems. He is currently a Site Mechanical Engineer at Elmech Electromechanical Works LLC in Dubai. Previously he has worked on projects in Qatar and India. He is seeking a new position as a Mechanical Engineer or Inspector where he can utilize his skills in project management, planning, quality control, and team leadership.
This document is a resume for Padmanabh M. Dhobale, a piping design engineer with over 11 years of experience working on projects in countries like the UAE, India, Egypt, Singapore, and Saudi Arabia. Some of his responsibilities have included 3D modeling, developing plot plans, nozzle orientation, rack design, and material takeoffs. Currently he works as a senior piping engineer for Dodsal Engineering & Construction in Dubai where he is the lead engineer for piping systems on a $1 billion water treatment project in Kuwait. Previously he has worked for companies like Petrofac, Toyo Engineering, and Shell on various oil and gas, petrochemical and refinery projects.
The document provides a summary of N.M.VenugopalRao's career experience and qualifications. It details over 18 years of experience in inspection engineering roles for pipeline, piping, and pressure vessel projects. Recent roles have included serving as a senior inspection engineer for Applus Velosi in Abu Dhabi and mechanical inspection lead for Moody Intertek. VenugopalRao holds relevant certifications and training in international codes and standards, and languages include English, Hindi, and Telugu.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
This document contains a work breakdown structure (WBS) for upstream oil and gas projects such as wellhead platforms, riser platforms, FPSOs, FLNGs, and subsea facilities. It details the levels, categories, and subcategories of work involved in engineering, procurement, fabrication/construction, and testing/commissioning of such projects. The WBS covers areas like specifications, calculations, drawings, procurement, yard work, structural steel, piping, electrical systems, instrumentation, telecommunications, civil works, and commissioning of completed systems.
R. Arun is applying for the position of MEP Supervisor. He has over 9 years of experience in HVAC maintenance and has worked in various sites in Dubai and Qatar. He is currently employed as a senior HVAC technician in Qatar. He has strong communication and interpersonal skills. He is willing to learn new skills and adapt to different situations. He has technical skills in operating and maintaining chillers, cooling towers, pumps, fans and other HVAC equipment. He also has experience working with BMS and fire alarm systems.
This document is a CV for Chandra Babu Battu, who has over 12 years of experience as a QA/QC inspector for structural and piping projects in oil, gas, and petrochemical industries. He has worked on numerous offshore rig projects and has extensive experience performing inspections, reviewing welding and testing plans, coordinating non-destructive testing, and ensuring work meets codes and standards. His qualifications include certifications in welding inspection and non-destructive testing methods.
This document is a curriculum vitae for Equbal Ahmad, a mechanical engineer seeking a position as a piping construction supervisor. It summarizes his 6 years of experience in piping installation and projects in Iraq and India, including roles as a piping engineer, piping supervisor, and mechanical engineer. It also lists his academic credentials of a B.Tech in Mechanical Engineering and certifications in AutoCAD, quality control, and ISO standards.
Raja kumar Resume (Senior Civil Engineer)RAJA KUMAR .R
Raman Rajakumar is a senior civil engineer with over 11 years of experience in marine and building construction projects in Singapore. He is currently working as a senior civil engineer for TOA Corporation on reclamation projects at Pulau Ubin and Pulau Tekong, where he is responsible for planning construction activities, preparing drawings and reports, supervising site works, and coordinating with contractors and consultants. Prior to this, he held various civil engineering roles with increasing responsibility on reclamation, drainage, soil improvement, and stabilized dredged fill projects. He holds a Bachelor's degree in Civil Engineering and is proficient in software like AutoCAD and MS Office.
Arulpeter.I is applying for a position as a Piping Engineer with over 6 years of experience in piping fabrication, erection, testing, and commissioning in refineries, petrochemical plants, aluminum smelters, and power plants in India and Saudi Arabia. He holds a Bachelor's degree in Mechanical Engineering and has worked on projects for companies like JGC Gulf International, Alcoa/Ma'aden, and Poyry/SEPCO. His responsibilities have included ensuring dimensional stability and material compliance, witnessing NDT and pressure testing, coordinating commissioning activities, and preparing documentation such as test plans and method statements.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
Pibri Djunaediawan is a QA/QC engineer with over 9 years of experience in structural and architecture engineering projects involving quality supervision and monitoring of construction projects. He has a bachelor's degree in architecture and seeks a challenging position that offers opportunities for professional development. His experience includes roles ensuring quality control and conducting inspections for various construction firms on projects like MRT Jakarta and office/apartment buildings.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Shaik Ghouse is a QA/QC Mechanical Inspector from India seeking a position in inspection. He has over 20 years of experience in mechanical inspection and non-destructive testing for oil and gas companies. He is certified in UT, MT, PT, RT and has experience inspecting items like tubular goods, valves, and engineered components. Ghouse is proficient in inspection software and Microsoft Office, and aims to utilize his skills and experience to achieve project targets.
Shaikh Nooruddin Yaqubali has over 12 years of experience as a piping supervisor for oil and gas projects. He has worked on numerous projects in the UAE and Saudi Arabia, managing fabrication, erection, welding, and quality control activities. He is knowledgeable in codes and standards like ASME and experienced in tasks like preparing test packs and as-built drawings.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
Saurabh Shah is a senior piping engineer with over 12 years of experience in piping design, construction, and commissioning of large oil and gas projects. He has extensive experience using AutoCAD, Microstation, and plant design software. Currently he works as a senior piping engineer at ALSA Engineering in Abu Dhabi where he is responsible for piping layouts, approvals, and coordination across disciplines.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
This document provides a summary of Arundas's experience and qualifications as a mechanical engineer seeking assignments in MEP project engineering and management. Over 8 years of experience is highlighted, including experience managing MEP projects in hospitals, hotels, and other buildings. Responsibilities included project planning, execution, testing and commissioning of HVAC, plumbing, electrical and other MEP systems. Additional experience with standards compliance, document preparation, scheduling, procurement, and safety management is also summarized.
Sr. Mechanical Piping Designer
Software Used: AutoCAD 2007, Micro Station V8
Duties and Responsibilities:
- Piping layout and design for gas processing facilities and oil & gas production platforms
- Preparation of piping isometric drawings, fabrication drawings, and installation drawings
- Preparation of piping material take-off and requisition
- Preparation of piping support layout drawings
- Coordination with other disciplines like civil, structural, electrical and instrumentation
- Review of vendor drawings and data sheets
- Preparation of as-built drawings
- Use of piping software like CAESAR II and AutoPLANT for piping stress analysis and 3D modeling
Major Projects:
The document is a curriculum vitae for Abdul Kalam Azad. It summarizes his experience as a CAD designer over 8 years, including current and previous roles. His current role since 2014 is at BFG International as a CAD designer, where he is responsible for 3D modeling, drawings, documentation and liaising with customers. Previously, he worked from 2010-2014 as an AutoCAD draftsman and from 2007-2010 as a CAD operator, gaining experience in engineering design, documentation, and site installation. He holds qualifications in mechanical engineering and CAD software.
Kiran Kumar Reddy has over 8 years of experience as a planning/schedule engineer. He has extensive experience using Primavera P6 and MS Project to plan large EPC projects in multiple industries. Some of the key projects he has worked on include DAP, phosphoric acid, and steam power plants in Morocco and olefins projects in Saudi Arabia. He is skilled at establishing baselines, monitoring progress, identifying delays, and ensuring timely project completion through scheduling.
Sanoop Ashraf is a mechanical engineer with over 6 years of experience in installation, supervision, testing, and commissioning of HVAC, plumbing, drainage, and fire fighting systems. He is currently a Site Mechanical Engineer at Elmech Electromechanical Works LLC in Dubai. Previously he has worked on projects in Qatar and India. He is seeking a new position as a Mechanical Engineer or Inspector where he can utilize his skills in project management, planning, quality control, and team leadership.
This document is a resume for Padmanabh M. Dhobale, a piping design engineer with over 11 years of experience working on projects in countries like the UAE, India, Egypt, Singapore, and Saudi Arabia. Some of his responsibilities have included 3D modeling, developing plot plans, nozzle orientation, rack design, and material takeoffs. Currently he works as a senior piping engineer for Dodsal Engineering & Construction in Dubai where he is the lead engineer for piping systems on a $1 billion water treatment project in Kuwait. Previously he has worked for companies like Petrofac, Toyo Engineering, and Shell on various oil and gas, petrochemical and refinery projects.
The document provides a summary of N.M.VenugopalRao's career experience and qualifications. It details over 18 years of experience in inspection engineering roles for pipeline, piping, and pressure vessel projects. Recent roles have included serving as a senior inspection engineer for Applus Velosi in Abu Dhabi and mechanical inspection lead for Moody Intertek. VenugopalRao holds relevant certifications and training in international codes and standards, and languages include English, Hindi, and Telugu.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
This document contains a work breakdown structure (WBS) for upstream oil and gas projects such as wellhead platforms, riser platforms, FPSOs, FLNGs, and subsea facilities. It details the levels, categories, and subcategories of work involved in engineering, procurement, fabrication/construction, and testing/commissioning of such projects. The WBS covers areas like specifications, calculations, drawings, procurement, yard work, structural steel, piping, electrical systems, instrumentation, telecommunications, civil works, and commissioning of completed systems.
R. Arun is applying for the position of MEP Supervisor. He has over 9 years of experience in HVAC maintenance and has worked in various sites in Dubai and Qatar. He is currently employed as a senior HVAC technician in Qatar. He has strong communication and interpersonal skills. He is willing to learn new skills and adapt to different situations. He has technical skills in operating and maintaining chillers, cooling towers, pumps, fans and other HVAC equipment. He also has experience working with BMS and fire alarm systems.
This document is a CV for Chandra Babu Battu, who has over 12 years of experience as a QA/QC inspector for structural and piping projects in oil, gas, and petrochemical industries. He has worked on numerous offshore rig projects and has extensive experience performing inspections, reviewing welding and testing plans, coordinating non-destructive testing, and ensuring work meets codes and standards. His qualifications include certifications in welding inspection and non-destructive testing methods.
This document is a curriculum vitae for Equbal Ahmad, a mechanical engineer seeking a position as a piping construction supervisor. It summarizes his 6 years of experience in piping installation and projects in Iraq and India, including roles as a piping engineer, piping supervisor, and mechanical engineer. It also lists his academic credentials of a B.Tech in Mechanical Engineering and certifications in AutoCAD, quality control, and ISO standards.
Raja kumar Resume (Senior Civil Engineer)RAJA KUMAR .R
Raman Rajakumar is a senior civil engineer with over 11 years of experience in marine and building construction projects in Singapore. He is currently working as a senior civil engineer for TOA Corporation on reclamation projects at Pulau Ubin and Pulau Tekong, where he is responsible for planning construction activities, preparing drawings and reports, supervising site works, and coordinating with contractors and consultants. Prior to this, he held various civil engineering roles with increasing responsibility on reclamation, drainage, soil improvement, and stabilized dredged fill projects. He holds a Bachelor's degree in Civil Engineering and is proficient in software like AutoCAD and MS Office.
Arulpeter.I is applying for a position as a Piping Engineer with over 6 years of experience in piping fabrication, erection, testing, and commissioning in refineries, petrochemical plants, aluminum smelters, and power plants in India and Saudi Arabia. He holds a Bachelor's degree in Mechanical Engineering and has worked on projects for companies like JGC Gulf International, Alcoa/Ma'aden, and Poyry/SEPCO. His responsibilities have included ensuring dimensional stability and material compliance, witnessing NDT and pressure testing, coordinating commissioning activities, and preparing documentation such as test plans and method statements.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
Pibri Djunaediawan is a QA/QC engineer with over 9 years of experience in structural and architecture engineering projects involving quality supervision and monitoring of construction projects. He has a bachelor's degree in architecture and seeks a challenging position that offers opportunities for professional development. His experience includes roles ensuring quality control and conducting inspections for various construction firms on projects like MRT Jakarta and office/apartment buildings.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Shaik Ghouse is a QA/QC Mechanical Inspector from India seeking a position in inspection. He has over 20 years of experience in mechanical inspection and non-destructive testing for oil and gas companies. He is certified in UT, MT, PT, RT and has experience inspecting items like tubular goods, valves, and engineered components. Ghouse is proficient in inspection software and Microsoft Office, and aims to utilize his skills and experience to achieve project targets.
Shaikh Nooruddin Yaqubali has over 12 years of experience as a piping supervisor for oil and gas projects. He has worked on numerous projects in the UAE and Saudi Arabia, managing fabrication, erection, welding, and quality control activities. He is knowledgeable in codes and standards like ASME and experienced in tasks like preparing test packs and as-built drawings.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
Saurabh Shah is a senior piping engineer with over 12 years of experience in piping design, construction, and commissioning of large oil and gas projects. He has extensive experience using AutoCAD, Microstation, and plant design software. Currently he works as a senior piping engineer at ALSA Engineering in Abu Dhabi where he is responsible for piping layouts, approvals, and coordination across disciplines.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
This document provides a summary of Arundas's experience and qualifications as a mechanical engineer seeking assignments in MEP project engineering and management. Over 8 years of experience is highlighted, including experience managing MEP projects in hospitals, hotels, and other buildings. Responsibilities included project planning, execution, testing and commissioning of HVAC, plumbing, electrical and other MEP systems. Additional experience with standards compliance, document preparation, scheduling, procurement, and safety management is also summarized.
Sr. Mechanical Piping Designer
Software Used: AutoCAD 2007, Micro Station V8
Duties and Responsibilities:
- Piping layout and design for gas processing facilities and oil & gas production platforms
- Preparation of piping isometric drawings, fabrication drawings, and installation drawings
- Preparation of piping material take-off and requisition
- Preparation of piping support layout drawings
- Coordination with other disciplines like civil, structural, electrical and instrumentation
- Review of vendor drawings and data sheets
- Preparation of as-built drawings
- Use of piping software like CAESAR II and AutoPLANT for piping stress analysis and 3D modeling
Major Projects:
The document is a curriculum vitae for Abdul Kalam Azad. It summarizes his experience as a CAD designer over 8 years, including current and previous roles. His current role since 2014 is at BFG International as a CAD designer, where he is responsible for 3D modeling, drawings, documentation and liaising with customers. Previously, he worked from 2010-2014 as an AutoCAD draftsman and from 2007-2010 as a CAD operator, gaining experience in engineering design, documentation, and site installation. He holds qualifications in mechanical engineering and CAD software.
Alan Rafer is a mechanical engineer with 12 years of experience in piping engineering and construction. He has expertise in piping design, layout, and supervision using CAD software like AutoCAD, Microstation, PDS, PDMS, and Cadworx. He is interested in working in other industries and has experience leading teams and delivering projects on schedule. His most recent role was as an Area Lead Engineer at GS East Asia Manila where he oversaw proposal projects.
Saichander Thirunagari is seeking a senior level position in design engineering or automation. He has over 6 years of experience in PLC programming, instrumentation, project management, automation projects, and customer support. He is currently a senior executive at Signode India Ltd. and has expertise in areas like process analysis, vendor development, engineering drawings, budgeting, and troubleshooting. He is proficient in software like Siemens Step 7, Allen Bradley RSLogix 5000, and Mitsubishi IQ Works. He has worked on several automation projects in industries like steel, cement, glass, and mining.
Maya V. Tatel has over 12 years of experience in process piping design and engineering for refineries, petrochemical plants, oil and gas facilities, and other industrial construction projects. She has worked on projects in the Middle East, Asia, and other regions. Her experience includes front-end engineering design, detailed design, quality control, construction support, and use of various CAD and project management software. She is proficient in international piping codes and standards.
This resume is for Tran Cong Danh, a Vietnamese national born in 1988. He has a Bachelor's degree in Aeronautical Engineering and over 6 years of experience in piping engineering and project management for onshore and offshore projects. His most recent role is as a Project Engineer at Technip Vietnam Co. Ltd., where he has worked since 2013 managing projects such as an ammonia plant revamp.
This document summarizes the experience and qualifications of M. Janakiraman. He has over 13 years of experience in process design and drafting for projects in various industries. Currently he works as a Process Designer and SPP&ID Coordinator at Tecnicas Reunidas in Bangalore, India, where he is responsible for coordinating projects, allocating work, and setting up and customizing SmartPlant software. He has a Bachelor's degree in Mechanical Engineering and is proficient in various CAD software packages including SmartPlant P&ID.
This document is a curriculum vitae for Eloisa Zuñiga-Bonavente, a civil and structural engineer from the Philippines. It lists her contact information, education credentials from Adamson University, engineering software skills, and over 8 years of work experience on infrastructure and industrial projects in Singapore, South Korea, and the Philippines. Her experience includes structural design, CAD drafting, tender evaluation, construction support, and acting as project coordinator and estimator. She seeks to further her career in civil engineering project management.
This document contains a resume for M. Naga Chaitanya summarizing his work experience and qualifications. He has over 3 years of experience as a piping designer and PDMS modeler working on projects for various companies. His responsibilities included pipe routing, 3D modeling, clash checking, preparing drawings and deliverables, and resolving issues in pipe models. He is proficient in software such as PDMS, AutoCAD, and Navisworks. He has a Bachelor's degree in Mechanical Engineering and additional qualifications in piping engineering and stress analysis.
Vijay C has over 4.9 years of experience in engineering design and CAD. He is proficient in CAD tools like CATIA V5, CATIA V6, SolidWorks and AutoCAD. He has worked on projects involving design of natural gas distribution systems, locomotive components, control valves, and aircraft seats. Vijay C is a certified SolidWorks professional and certified in Enterprise PDM. He has experience in 3D modeling, assemblies, sheet metal parts, applying GD&T, and managing engineering data in PLM tools.
Ahmed Kamal Mohamed Tawfik is an Egyptian piping engineer with over 11 years of experience in piping design, engineering, project management, and construction. He holds a B.Sc. in Mechanical Engineering and is a member of the Egyptian Engineering Syndicate. His experience includes working on refinery, petrochemical, offshore, and power projects in Egypt, Iran, and Qatar. Currently he is a Senior Hydrotest Engineer for an ERC refinery project in Egypt, where he is responsible for test package preparation and execution.
Sharvan Kumar has over 8 years of experience in piping design and plant engineering. He currently works as a Piping Design Engineer for TECHNIP in India. Previously, he has worked on projects for Braskem Idesa and in the power sector for DESEIN-INDURE and NTPC. Sharvan has extensive expertise in piping layout design, 3D modeling, underground piping systems, and preparing technical documentation. He is proficient in piping software such as PDS, AutoCAD, and Navisworks.
The document is a resume for Merajuddin Ansari, who has over 6 years of experience as a piping modeler and designer using SP3D. He currently works as an SP3D Piping Designer for Worleyparsons in Mumbai, where he is responsible for 3D modeling of piping and equipment, modeling supports, resolving errors and clashes, and generating isometric drawings and documents. Prior to his current role, he has worked on offshore projects as a piping designer for other companies.
This document summarizes the career experience of Nazrul Mazdi Mokhtar as a piping designer with over 20 years of experience. He has worked on various oil, gas and petrochemical projects for companies like Foster Wheeler, Technip, Shell and BP. His responsibilities have included piping modeling, layout design, producing drawings, coordinating with other disciplines, and supporting construction and commissioning activities. He is proficient in several piping software programs and has extensive experience in designing systems for refineries, gas plants, power plants and other process facilities.
Chetan Kumar Ramachandrappa Jayaram has over 10 years of experience in mechanical engineering and design. He currently works as a zone lead for Airbus on the A350 aircraft, where he is responsible for quality checks of drawings and managing issues from design to delivery. Previously he has worked on several aircraft programs for Airbus including the A380, A400M, designing electrical harnesses and performing 3D checks. He is proficient in CATIA V5, AutoCAD and other design tools.
The document provides a curriculum vitae for Ramesh Digambarao Pawar, who has over 16 years of experience as a piping designer. He currently works for Amec Foster Wheeler India Private Limited as a senior piping designer using 3D modeling software on oil, gas, refinery and petrochemical projects. He has extensive experience in piping design, modeling, engineering and coordination across various roles and projects in his career.
- The document provides a summary of Sreekumar Pillai's professional experience and qualifications. He has over 30 years of experience in engineering, procurement, and construction management of refinery, fertilizer, oil and gas projects. He has led engineering teams and implemented software systems like SAP, PDS, PDMS. He has managed large projects in India and internationally for companies like Saudi Aramco, ONGC, and IOCL.
M. Vinoth has over 9 years of experience as a Process Designer specializing in SPPID, AutoCAD, and MicroStation. He currently works for Petrofac Engineering Services India and has previously worked for Nest Jacobs, Dodsal Engineering, Valdel Engineers, and Technip. Vinoth has extensive experience preparing Piping and Instrumentation Diagrams, Material Selection Diagrams, and verifying designs using software like SPPID. He aims to contribute to company growth using his software and project experience.
M. Vinoth is a process designer with over 9 years of experience working on oil, gas, chemical and petrochemical projects. He has expertise in SPPID, AutoCAD, and other software. Currently working at Petrofac Engineering Services India Pvt. Ltd., his previous positions include roles at Neste Jacobs, Dodsal Engineering & Construction PTE. Ltd., Valdel Engineers & Constructors Pvt. Ltd., and Technip KT India Ltd. He provides process design services including P&ID development, equipment lists, and verifying drawings against standards.
Mohamed Abdelfattah Mohamed Omar is seeking a challenging position utilizing his seven years of experience as an instrumentation and control engineer. He has worked as an Instrumentation and Control Engineer for QARUN Petroleum Company-APACHE CORP-JV in Cairo since 2012, where his responsibilities included defining goals, providing technical support, supervising projects, and evaluating performance. Previously, he worked as a Field Engineer for QARUN Base from 2009 to 2012, where his duties involved installing, maintaining, and troubleshooting field instrumentation devices. He holds a Bachelor's degree in Communications & Electronics from Cairo University.
Similar to Technip fmc cv_hoang cong quoc khanh (20)
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
The Python for beginners. This is an advance computer language.
Technip fmc cv_hoang cong quoc khanh
1. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 1 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Profile
Thirteen (13) years of experience in piping engineering work for oil and
gas, chemical, petrochemical and power plant industries. The
experience covers both onshore and offshore works for feasibility
study, conceptual design, basic engineering, and detail design and
administration of 3D CAD tools (PDMS, E3D, SP3D, PDS).
I have been involved and worked in overseas such as: Japan, Brazil
and Malaysia.
Positions of Responsibility are Piping Engineer / PDMS Administrator
in TechnipFMC. Experience in various position including: Piping
Engineer, Piping Designer, PDMS administrator, E3D Administrator,
SP3D Administrator.
Knowledge in international codes and standards like ASME, API,
ASTM, Shell DEP
Two (02) years in planning maintenance a machine and responsible for
maintenance all kinds of machines at plant.
Main projects
Highlight of major green field projects as lead engineer includes:
- The Al Shaheen Phase 2 Field Development Project for offshore
Qatar – Detailed Engineering
- CRD TLWP Subsea project – FEED and Detailed Engineering
- Dinh Co LPG project – Detailed Engineering
- Huntsman VIP project – FEED and Detailed Engineering
- Su Tu Trang Platfom project – Detailed Engineering
- Thien Ung BK-TNG Platform – FEED and Detailed Engineering
- Su Tu Nau Platfom project – Detailed Engineering
- ThangLong – DongDo – Detailed Engineering Design
- Rubby -B – Detail Engineering
- KNOC Extend Cooler– Detail Engineering
Education
Bachelor’s Degree in Machanical
Engineering, Ho Chi Minh City
University of Technical Eduacation
Professional Qualifications /
Registration
PDMS certificate - AVEVA
SP3D certificate - INTERGHAPH
ISO certificate
Certificate of Lean Six Sigma
101, 201 and 301 from
TechnipFMC University
Nationality
Vietnam
Languages
English, Good
Vietnamese, Fluent
Year of Birth
1981
Experience in Software
PDMS
E3D
SP3D
PDS
Autocad
Position : Piping Engineer / PDMS Administrator
Email: khanhhcq81@gmail.com
Phone: +84909316341
Hoang Cong Quoc Khanh
2. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 2 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Detailed background
Period Company Name Position Held
06/2010 – Present Technip Engineering (Vietnam) Ltd Piping Engineer / PDMS Administrator
05/2009 – 05/2010 Shinsei Vietnam Engineering Co.,Ltd Piping & PDMS Engineer
03/2008 – 04/2009 Toyo Engineering Corporation (Brasil) PDMS Designer
03/2006 – 02/2008 Cactus Engineering Co., Ltd PDMS Designer
05/2004 – 02/2006 United Packing Joint Stock Company Mechanical Engineer
Work history with TechnipFMC(since 2010)
11/2018 –
06/2019
Client: NORTH OIL COMPANY (NOC).
Project Title /
Description:
The Al Shaheen Phase 2 Field Development Project for offshore Qatar –
Detailed Engineering
Project Position: E3D Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up E3D Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Design routing of pipe based on the P&ID
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
Customized E3D MDS (multi disciplinepipe support) system to suitproject
pipe supports standards
Prepared daily review model file (3D walk through) for client review
Interface between Structural BOCAD model with E3D model
04/2018 –
10/2018
Client: Japan Vietnam Petroleum Company (JVPC).
Project Title /
Description:
Whp-E1 Slot Extension Verification Engineering
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Design routing of pipe based on the P&ID
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
3. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 3 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepared daily review model file (3D walk through) for client review
Platform site survey & report
10/2017 –
03/2018
Client: Talisman Vietnam 07/03 B.V.
Project Title /
Description:
Ca Rong Do TLWP Project for:-
Suppy of flexible reisers, Pipelines & SSIV Skid
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Piping
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
09/2016 –
09/2017
Client: PetroVietnam Gas (PVGAS).
Project Title /
Description:
Dinh Co LPG Project for:-
Enhanced LPG recovery project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Extract Material Take-Off Report, Bolt Summary Report
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
02/2016 –
08/2016
Client: Huntsman (Singapore) Pte.Ltd.
Project Title /
Description:
Huntsman VIP Projectfor:-
P&ID of production and utilities
Steel structure for blender and reactor,civil for equipmentfoundationand
separation wall (door)
Equipment, Piping layout
Equiment, Piping specification
HVAC, dust collection system and local ventilation
Electric and MCC, instrumentation and control system
4. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 4 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Extract Material Take-Off Report, Bolt Summary Report
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
03/2015 –
01/2016
Client: Cuu Long Joint Operating Company
Project Title /
Description:
Su Tu Trang full field development – phase 1
Detailed engineering and procurementengineering supportservices:-
Detail design for wellhead platform ST-PIP, Living quarter ST-LQ &
WHP-C
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Prepared 3D Model Project Implementation Procedures and local work
instructions
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Import Structural BOCAD model into PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
04/2014 –
02/2015
Client: VIETSOPETRO Company
Project Title /
Description:
Detail Engineering Service for BK-TNG Wellhead Platform
Project Position: SP3D Administrator
5. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 5 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities: Responsible for piping detail engineering package comprising of:
Overall 3D model management and quality assurances related to 3D
modeling by all disciplines
Managing permission groups and levels of access for the project
Focal Point for all disciplines related to 3D MODEL
Document scope of modeling by disciplines
Creation/maintenance/modifications of specifications and components in
the Catalogue Database
Flow of general information to and from designers/drafters and LD’s
Managing “To-do list” activities to check inconsistent data in 3D models
for every disciplines
Prepare the SPR review for client review
Batch generation and extraction of drawings and reports
Backup and archiving of S3D database
04/2013 –
04/2014
Client: Cuu Long Joint Operating Company
Project Title /
Description:
Su Tu Field Development – Su Tu Nau Wellhead Platforms and Pipelines
EPCI Contract
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Prepared 3D Model Project Implementation Procedures and local work
instructions
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Import Structural TEKLA model into the PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
06/2012 –
03/2013
Client: Petronas Carigali Company
Project Title /
Description:
FEED and EPCIC of SK316 Development Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping engineering package comprising of:
6. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 6 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, and Catalogue
Import Structural BOCAD model into the PDMS model
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
12/2011 –
05/2012
Client: LAMSON Join Operating Company
Project Title /
Description:
ThangLong – DongDo Detailed Engineering Design
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Import Structural BOCAD model into the PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
02/2011 –
11/2011
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
Detailed Engineering For Booster Compressor
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, Catalogue
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
check report
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
7. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 7 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
03/2011 –
08/2011
Client: VIETSOPETRO Company
Project Title /
Description:
ThienUng FEED Project
Project Position: Piping Designer / Smart Plant Marine Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Coordinate with Administrator in Technip Malaysia to prepare
Administration activities of Smart Plant Marine software database
management, Draft setup, Isodraft Setup, Spec and Catalogue
Design routing of pipe based on the P&ID
Select pipe supports and model support
3D modeling of equipment, nozzles orientation
Extract & check Isometric drawings
Extract Material Take-Off Report
Prepare for the General Arrangement (GA) drawings
03/2011 –
08/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
RBDP-A Gaslift Upgrading Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Design routing of pipe based on the P&ID, and Platform site survey
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report, Bolt Summary
Prepare for the General Arrangement (GA) drawings
10/2010 –
02/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
RBDP-B Gaslift Upgrading Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
8. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 8 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report, Bolt Summary
Prepare for the General Arrangement (GA) drawings
Prepare the review (3D walk through) for client review
06/2010 –
10/2010
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
Rong Doi Tay Field Development Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
Import Structural BOCAD model into PDMS model
Design routing of pipe based on the P&ID
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report,BoltSummaryreportand also Centre of
Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepare the review (3D walk through) for client review
Previous history
SHINSEI VIETNAM EMGINEERING CO., Ltd (05/2009 – 05/2010)
Piping & PDMS Engineer
05/2009 – 05/2010 Client: Shintech Louisiana
Project Title /
Description:
Hydrochloric Acid Production, LLC
Project Position: PDMS Piping design engineer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Select pipe supports and model support
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract & check General Arrangement (GA) drawings
Review Model such as Valve Operability, Maintainability, accessibility,
and constructibility by using the NAVISK WORK REVIEW Software
9. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 9 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
TOYO ENGINEERING CORPORATION (BRASIL) (03/2008 – 04/2009)
PDMS Designer
03/2008 – 03/2009 Client: PETROBRAS – Petroleo Brasileiro S.A, Brazil
Project Title /
Description:
RVP (MODERNIZATION OF HENRIQUE LAGE REFINERY )
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Create and extract Spool drawings and Spool map drawings
Extract and check Isometric drawings, Unit plot plan
Preparing fabrication isometric drawings
Select pipe supports and model support
CACTUS ENGINEERING CO., Ltd (03/2006 – 02/2009)
PDMS Designer
06/2007 – 02/2008 Client: Nippon / Chiyoda Co.,
Project Title /
Description:
GTL (Gas to Liquid)
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Extract & check Isometric drawings, unit plot plan
Extract & check General Arrangement (GA) drawings
01/2007 – 05/2007 Client: Shintech Engineering Co.,
Project Title /
Description:
MA2 (Boiler Plant)
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Extract & check Isometric drawings
Extract & check General Arrangement (GA) drawings
Prepare report clash check
10/2006 – 12/2006 Client: Shintech Engineering Co.,
Project Title /
Description:
VCM2 (Vinyl Chlorride Monomer)
Project Position: PDMS Designer
10. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 10 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Extract & check Isometric drawings
Drafting of equipment layout, nozzle orientation
Extract & check General Arrangement (GA) drawings
Prepare report clash check
03/2006 – 08/2006 Client: Shinsei Giken Co.,
Project Title /
Description:
Piping training course (on the job training)
Project Position: Piping / PDMS Designer
Responsibilities: Learn PDMS software from Japanese senior
Learn the basics of piping and equipment components
Prepare Isometric drawings based on piping plans
To do various piping design around equipment
Understand P&ID and standards (ASME, ANSI…)
UNITED PACKING JOINT STOCK Co., (05/2004 – 02/2006)
Mechanical Engineer
05/2004 – 02/2006 Client:
Project Title /
Description:
Project Position: Mechanical Engineer
Responsibilities: Designing kinds of Moulds basing on customers’ need
Managing Moulds
Planning maintenance a machine and responsible for maintenance all
kinds of machines at plant