SlideShare a Scribd company logo
How to use and maintain Taber Abrasion Tester
Date:30th
, May, 2016|Author: QINSUN
Abrasion Tester mainly through rotary grinding way, using different kinds of friction wheel on the sample to detect the rotation
wear leather and plastic materials. Widely used in performance testing metal, paint, sheet metal surface coating materials,
textiles, leather, rubber and other fields. This paper is widely used for this instrument, and focuses on a number of notices
about their use and maintenance operations
Test principle: The test sample is placed on a rotating platform, through two rolling friction wheel above it under a certain load
and rotational friction movement to the specimen wear test specimen. A friction wheel outwards, which towards another
friction wheel friction within the sample, form a circular trace of wear. To assess the degree of wear of the sample through the
appearance, which would after a predetermined number of rubs.
Instructions
Test preparation
1. The test sample is fixed on the turntable, select the desired test weight loaded, and make sure the wheel is not in contact
with the sample test fixture during testing
2. The governor switch to the minimum.
3. After setting the number of tests in accordance with the requirements of the test, the machine is in the test state
Practices:
1. Marked by an appropriate power supply connected to 220V
2. The governor switch to the minimum in order to avoid excessive speed, causing the machine abnormal
3. Turn on the power, first test machine, then turn off the power if no abnormal.
4. Press the reset button the counter to zero. According to the requirements set required number of tests, the counter can be
set to maximum 99999999 times
5. Press RST key on the counter will clear the counter, press> five seconds to enter the number of trials is set on the counter
to eight digits from the lower right to the upper left represent bits to ten million, as set 280 360 times, press> key the jitter value
is adjusted to the upper left third digit press ∧ key to set the value to 2, then press the> button to adjust the value to the
upper left beating fourth digital press ∧ key value is set to 8, then press> key to beating value is adjusted to the lower right
third digit press ∧ key value is set to 3, then press> to move the beat value is adjusted to the lower right second digit press
∧ key to set the value 6, other locations are set to zero, according to test requirements set number of times needed to test
6. Press the start button, the machine will enter the test status
7. Regulator governor, the speed is adjusted to the desired speed test
8. Turn on the vacuum cleaner the power switches to work
9. Set number of times to test the counter, the machine automatically shut down in standby mode
10. Turn off the power, remove jewelry, washing machine
Maintenance issues
1. It must be placed on stable ground before using the instrument
2. It is not allowed in the course of fiddle machine
3. Select the appropriate power supply voltage, never too high to avoid burn device
4. When the instrument is abnormal, please contact the Secretary for timely processing
5. There must be good ventilation when working machines
6. Each key mechanical component, due to the large operating load, please lubricate the mechanical part
7. Each test is completed, cleaning machine, keep the machine clean
More view on http://www.qinsun-lab.com/Products/schopper-abrasion-tester.html

More Related Content

Similar to Taber abrasion tester

S 1688 stencil cleaner machine operation instruction manual smthelp
S 1688 stencil cleaner machine operation instruction manual smthelpS 1688 stencil cleaner machine operation instruction manual smthelp
S 1688 stencil cleaner machine operation instruction manual smthelp
Shenzhen Southern Machinery Sales And Service Co., Ltd
 
Qualification of laboratory equipments by Mayuri Soni
Qualification of laboratory equipments by Mayuri SoniQualification of laboratory equipments by Mayuri Soni
Qualification of laboratory equipments by Mayuri Soni
Mayuri Soni
 
Rotary vortex flow meters
Rotary vortex flow metersRotary vortex flow meters
Maa sharda pharmacy college ayodhya SOP
Maa sharda pharmacy college ayodhya SOPMaa sharda pharmacy college ayodhya SOP
Maa sharda pharmacy college ayodhya SOP
JitendraKumarChauhan3
 
Hướng dẫn sử dụng Testo 511
Hướng dẫn sử dụng Testo 511Hướng dẫn sử dụng Testo 511
Hướng dẫn sử dụng Testo 511
Tenmars Việt Nam
 
Air blast drying oven manual
Air blast drying oven manualAir blast drying oven manual
Viscometer model 900
Viscometer model 900Viscometer model 900
Viscometer model 900
Bakhtiar Mahmood
 
Friability Tester Qualifiaction.pptx
Friability Tester Qualifiaction.pptxFriability Tester Qualifiaction.pptx
Friability Tester Qualifiaction.pptx
Ojas Sawalikar
 
Presentation on stenter machine
Presentation on stenter machinePresentation on stenter machine
Presentation on stenter machine
Emran Ali
 
Rheological properties using model 900 viscometer
Rheological properties using model 900 viscometerRheological properties using model 900 viscometer
Rheological properties using model 900 viscometer
Kamal Abdurahman
 
SOP
SOPSOP
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
Tenmars Việt Nam
 
Ultrasonic Fuel Monitoring Sensor v3.0
Ultrasonic Fuel Monitoring Sensor v3.0Ultrasonic Fuel Monitoring Sensor v3.0
Ultrasonic Fuel Monitoring Sensor v3.0
robin huang
 
Full Automatic Pcb loader Operation manual
Full Automatic Pcb loader Operation manualFull Automatic Pcb loader Operation manual
Full Automatic Pcb loader Operation manual
Shenzhen Southern Machinery Sales And Service Co., Ltd
 
We Sjb02 Nylon Pyramid Tea Packing Machine
We Sjb02 Nylon Pyramid Tea Packing MachineWe Sjb02 Nylon Pyramid Tea Packing Machine
We Sjb02 Nylon Pyramid Tea Packing Machine
Worldepack
 
Digital viscometer
Digital viscometer Digital viscometer
Digital viscometer
Muhammad Faisal
 
Qualification of Tablet Compression Machine.pptx
Qualification of Tablet Compression Machine.pptxQualification of Tablet Compression Machine.pptx
Qualification of Tablet Compression Machine.pptx
Dhruvi50
 
bnt68 introduction
bnt68 introductionbnt68 introduction
bnt68 introduction
Mona Lisa
 
how to use Mst1000 motor ingiting signal
how to use Mst1000 motor ingiting signalhow to use Mst1000 motor ingiting signal
how to use Mst1000 motor ingiting signal
Enzo C
 
Pressure transmitter dalian zero instrument technology co., ltd china
Pressure transmitter dalian zero instrument technology co., ltd china Pressure transmitter dalian zero instrument technology co., ltd china
Pressure transmitter dalian zero instrument technology co., ltd china
Dalian Zero Instrument Technology Co., Ltd China
 

Similar to Taber abrasion tester (20)

S 1688 stencil cleaner machine operation instruction manual smthelp
S 1688 stencil cleaner machine operation instruction manual smthelpS 1688 stencil cleaner machine operation instruction manual smthelp
S 1688 stencil cleaner machine operation instruction manual smthelp
 
Qualification of laboratory equipments by Mayuri Soni
Qualification of laboratory equipments by Mayuri SoniQualification of laboratory equipments by Mayuri Soni
Qualification of laboratory equipments by Mayuri Soni
 
Rotary vortex flow meters
Rotary vortex flow metersRotary vortex flow meters
Rotary vortex flow meters
 
Maa sharda pharmacy college ayodhya SOP
Maa sharda pharmacy college ayodhya SOPMaa sharda pharmacy college ayodhya SOP
Maa sharda pharmacy college ayodhya SOP
 
Hướng dẫn sử dụng Testo 511
Hướng dẫn sử dụng Testo 511Hướng dẫn sử dụng Testo 511
Hướng dẫn sử dụng Testo 511
 
Air blast drying oven manual
Air blast drying oven manualAir blast drying oven manual
Air blast drying oven manual
 
Viscometer model 900
Viscometer model 900Viscometer model 900
Viscometer model 900
 
Friability Tester Qualifiaction.pptx
Friability Tester Qualifiaction.pptxFriability Tester Qualifiaction.pptx
Friability Tester Qualifiaction.pptx
 
Presentation on stenter machine
Presentation on stenter machinePresentation on stenter machine
Presentation on stenter machine
 
Rheological properties using model 900 viscometer
Rheological properties using model 900 viscometerRheological properties using model 900 viscometer
Rheological properties using model 900 viscometer
 
SOP
SOPSOP
SOP
 
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
Hướng dẫn sử dụng máy đo tốc độ vòng quay testo 460
 
Ultrasonic Fuel Monitoring Sensor v3.0
Ultrasonic Fuel Monitoring Sensor v3.0Ultrasonic Fuel Monitoring Sensor v3.0
Ultrasonic Fuel Monitoring Sensor v3.0
 
Full Automatic Pcb loader Operation manual
Full Automatic Pcb loader Operation manualFull Automatic Pcb loader Operation manual
Full Automatic Pcb loader Operation manual
 
We Sjb02 Nylon Pyramid Tea Packing Machine
We Sjb02 Nylon Pyramid Tea Packing MachineWe Sjb02 Nylon Pyramid Tea Packing Machine
We Sjb02 Nylon Pyramid Tea Packing Machine
 
Digital viscometer
Digital viscometer Digital viscometer
Digital viscometer
 
Qualification of Tablet Compression Machine.pptx
Qualification of Tablet Compression Machine.pptxQualification of Tablet Compression Machine.pptx
Qualification of Tablet Compression Machine.pptx
 
bnt68 introduction
bnt68 introductionbnt68 introduction
bnt68 introduction
 
how to use Mst1000 motor ingiting signal
how to use Mst1000 motor ingiting signalhow to use Mst1000 motor ingiting signal
how to use Mst1000 motor ingiting signal
 
Pressure transmitter dalian zero instrument technology co., ltd china
Pressure transmitter dalian zero instrument technology co., ltd china Pressure transmitter dalian zero instrument technology co., ltd china
Pressure transmitter dalian zero instrument technology co., ltd china
 

Recently uploaded

学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
171ticu
 
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptxIntroduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
MiscAnnoy1
 
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student MemberIEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
VICTOR MAESTRE RAMIREZ
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Yasser Mahgoub
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
SUTEJAS
 
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoringEmbedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
IJECEIAES
 
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptxjohn krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Madan Karki
 
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
amsjournal
 
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesHarnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Christina Lin
 
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
官方认证美国密歇根州立大学毕业证学位证书原版一模一样官方认证美国密歇根州立大学毕业证学位证书原版一模一样
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
171ticu
 
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENTNATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Addu25809
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
IJECEIAES
 
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
zubairahmad848137
 
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURSCompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
RamonNovais6
 
Properties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptxProperties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptx
MDSABBIROJJAMANPAYEL
 
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
ecqow
 
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
insn4465
 
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
gerogepatton
 
Curve Fitting in Numerical Methods Regression
Curve Fitting in Numerical Methods RegressionCurve Fitting in Numerical Methods Regression
Curve Fitting in Numerical Methods Regression
Nada Hikmah
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
MIGUELANGEL966976
 

Recently uploaded (20)

学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
 
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptxIntroduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
 
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student MemberIEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
 
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoringEmbedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
 
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptxjohn krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
 
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
 
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesHarnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
 
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
官方认证美国密歇根州立大学毕业证学位证书原版一模一样官方认证美国密歇根州立大学毕业证学位证书原版一模一样
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
 
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENTNATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
 
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
 
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURSCompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
 
Properties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptxProperties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptx
 
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
 
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
 
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
 
Curve Fitting in Numerical Methods Regression
Curve Fitting in Numerical Methods RegressionCurve Fitting in Numerical Methods Regression
Curve Fitting in Numerical Methods Regression
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
 

Taber abrasion tester

  • 1. How to use and maintain Taber Abrasion Tester Date:30th , May, 2016|Author: QINSUN Abrasion Tester mainly through rotary grinding way, using different kinds of friction wheel on the sample to detect the rotation wear leather and plastic materials. Widely used in performance testing metal, paint, sheet metal surface coating materials, textiles, leather, rubber and other fields. This paper is widely used for this instrument, and focuses on a number of notices about their use and maintenance operations Test principle: The test sample is placed on a rotating platform, through two rolling friction wheel above it under a certain load and rotational friction movement to the specimen wear test specimen. A friction wheel outwards, which towards another friction wheel friction within the sample, form a circular trace of wear. To assess the degree of wear of the sample through the appearance, which would after a predetermined number of rubs. Instructions Test preparation 1. The test sample is fixed on the turntable, select the desired test weight loaded, and make sure the wheel is not in contact with the sample test fixture during testing 2. The governor switch to the minimum. 3. After setting the number of tests in accordance with the requirements of the test, the machine is in the test state Practices: 1. Marked by an appropriate power supply connected to 220V 2. The governor switch to the minimum in order to avoid excessive speed, causing the machine abnormal 3. Turn on the power, first test machine, then turn off the power if no abnormal. 4. Press the reset button the counter to zero. According to the requirements set required number of tests, the counter can be set to maximum 99999999 times 5. Press RST key on the counter will clear the counter, press> five seconds to enter the number of trials is set on the counter to eight digits from the lower right to the upper left represent bits to ten million, as set 280 360 times, press> key the jitter value is adjusted to the upper left third digit press ∧ key to set the value to 2, then press the> button to adjust the value to the upper left beating fourth digital press ∧ key value is set to 8, then press> key to beating value is adjusted to the lower right third digit press ∧ key value is set to 3, then press> to move the beat value is adjusted to the lower right second digit press ∧ key to set the value 6, other locations are set to zero, according to test requirements set number of times needed to test 6. Press the start button, the machine will enter the test status 7. Regulator governor, the speed is adjusted to the desired speed test 8. Turn on the vacuum cleaner the power switches to work 9. Set number of times to test the counter, the machine automatically shut down in standby mode 10. Turn off the power, remove jewelry, washing machine Maintenance issues 1. It must be placed on stable ground before using the instrument 2. It is not allowed in the course of fiddle machine 3. Select the appropriate power supply voltage, never too high to avoid burn device 4. When the instrument is abnormal, please contact the Secretary for timely processing 5. There must be good ventilation when working machines 6. Each key mechanical component, due to the large operating load, please lubricate the mechanical part 7. Each test is completed, cleaning machine, keep the machine clean More view on http://www.qinsun-lab.com/Products/schopper-abrasion-tester.html