Legal requirements must be followed to start and run a business in California. Licenses and permits are required from state and local government for specific aspects of the business, such as sellers permits, building permits, sign permits, and occupational licenses. The legal structure of the business such as sole proprietorship, partnership, LLC, or corporation also impacts licensing needs. Proper legal documentation and compliance is necessary to open and operate legally.
The document summarizes the Commercial Division of High Courts Bill, 2009. The key points are:
1. The bill seeks to establish commercial divisions within each High Court to handle high value commercial disputes over Rs. 5 crores.
2. The commercial divisions will have original jurisdiction over such cases and introduce fast-track procedures to expedite case disposal within strict timelines.
3. Only disputes between merchants, bankers, and traders relating to commercial transactions and documents above the specified value threshold will fall under the jurisdiction of commercial divisions.
This document provides an overview of the legal and regulatory framework for foreign investment in post-sanctions Iran. It discusses the Iranian legal system, commercial and criminal codes, and opportunities and challenges for public-private partnerships, joint ventures, intellectual property, and other forms of investment. The document also examines the Foreign Investment Promotion and Protection Act, which protects foreign investors' rights and covers non-commercial risks. Potential investors are advised to familiarize themselves with relevant Iranian laws and regulations and pursue partnerships with reputable local firms. Over time, Iran's banking, finance and contracting systems will continue developing to better facilitate foreign investment.
Written while pursuing the NUJS MA in Business Laws (http://startup.nujs.edu/). It often so happens that an agreement or conveyance or any other document is improperly stamped and not in compliance with the Indian Stamp Act, 1958, or any of the State stamp legislations. This article discusses the provisions relating to such documents and the different ways such stamping requirements could be complied with and rectified.
The document discusses insider trading regulations in India. It defines key terms like insider trading, connected persons, unpublished price sensitive information, trading window, and penalties for violations. It summarizes SEBI's powers to investigate complaints and take action against persons found guilty of insider trading under Indian law. Model codes of conduct are also outlined that listed companies must follow to prevent insider trading.
Insider trading involves trading in a company's securities using material, non-public information. It can include directors, employees or other connected persons trading based on confidential corporate info. The US was first to tackle insider trading through the Securities Exchange Act of 1984. In India, SEBI regulations from 1992 define "insiders" as connected persons who may have access to unpublished price sensitive info. The regulations prohibit insiders from trading using such info and require listed companies to implement codes of conduct regarding disclosure practices. Violations can result in heavy financial penalties or criminal prosecution.
This document is a research paper on insider trading prepared by CA Mayank Mittal. It defines insider trading as dealing in a company's securities using non-public, price-sensitive information for profit or loss. The paper discusses the history of regulating insider trading in India and defines who qualifies as an insider. It outlines the negative impacts of insider trading, governing regulations and penalties. The paper concludes that proper internal controls are needed to prevent insider trading and protect organizations and market integrity.
This document provides an overview of insider trading regulations and practices in India. It discusses the history behind insider trading regulations, defines key terms like who qualifies as an insider and what constitutes unpublished price sensitive information. It also outlines the regulatory aspects of prohibiting insider trading in India according to SEBI regulations. Finally, it summarizes some notable insider trading cases in India involving companies like HLL, Rakesh Agarwal and Samir Arora.
This document summarizes key aspects of the new Prohibition of Insider Trading Regulation introduced by SEBI in 2015, including expanded definitions. It notes that the regulation aims to close loopholes, address changes in business and technology, and curb rampant insider trading by giving SEBI more power. Key definitions expanded include "connected person" to include a wide variety of individuals who may have access to unpublished price sensitive information, and "insider" to include anyone with access to such information. The definition of unpublished price sensitive information is also expanded beyond financial results to include other strategic business information.
The document summarizes the Commercial Division of High Courts Bill, 2009. The key points are:
1. The bill seeks to establish commercial divisions within each High Court to handle high value commercial disputes over Rs. 5 crores.
2. The commercial divisions will have original jurisdiction over such cases and introduce fast-track procedures to expedite case disposal within strict timelines.
3. Only disputes between merchants, bankers, and traders relating to commercial transactions and documents above the specified value threshold will fall under the jurisdiction of commercial divisions.
This document provides an overview of the legal and regulatory framework for foreign investment in post-sanctions Iran. It discusses the Iranian legal system, commercial and criminal codes, and opportunities and challenges for public-private partnerships, joint ventures, intellectual property, and other forms of investment. The document also examines the Foreign Investment Promotion and Protection Act, which protects foreign investors' rights and covers non-commercial risks. Potential investors are advised to familiarize themselves with relevant Iranian laws and regulations and pursue partnerships with reputable local firms. Over time, Iran's banking, finance and contracting systems will continue developing to better facilitate foreign investment.
Written while pursuing the NUJS MA in Business Laws (http://startup.nujs.edu/). It often so happens that an agreement or conveyance or any other document is improperly stamped and not in compliance with the Indian Stamp Act, 1958, or any of the State stamp legislations. This article discusses the provisions relating to such documents and the different ways such stamping requirements could be complied with and rectified.
The document discusses insider trading regulations in India. It defines key terms like insider trading, connected persons, unpublished price sensitive information, trading window, and penalties for violations. It summarizes SEBI's powers to investigate complaints and take action against persons found guilty of insider trading under Indian law. Model codes of conduct are also outlined that listed companies must follow to prevent insider trading.
Insider trading involves trading in a company's securities using material, non-public information. It can include directors, employees or other connected persons trading based on confidential corporate info. The US was first to tackle insider trading through the Securities Exchange Act of 1984. In India, SEBI regulations from 1992 define "insiders" as connected persons who may have access to unpublished price sensitive info. The regulations prohibit insiders from trading using such info and require listed companies to implement codes of conduct regarding disclosure practices. Violations can result in heavy financial penalties or criminal prosecution.
This document is a research paper on insider trading prepared by CA Mayank Mittal. It defines insider trading as dealing in a company's securities using non-public, price-sensitive information for profit or loss. The paper discusses the history of regulating insider trading in India and defines who qualifies as an insider. It outlines the negative impacts of insider trading, governing regulations and penalties. The paper concludes that proper internal controls are needed to prevent insider trading and protect organizations and market integrity.
This document provides an overview of insider trading regulations and practices in India. It discusses the history behind insider trading regulations, defines key terms like who qualifies as an insider and what constitutes unpublished price sensitive information. It also outlines the regulatory aspects of prohibiting insider trading in India according to SEBI regulations. Finally, it summarizes some notable insider trading cases in India involving companies like HLL, Rakesh Agarwal and Samir Arora.
This document summarizes key aspects of the new Prohibition of Insider Trading Regulation introduced by SEBI in 2015, including expanded definitions. It notes that the regulation aims to close loopholes, address changes in business and technology, and curb rampant insider trading by giving SEBI more power. Key definitions expanded include "connected person" to include a wide variety of individuals who may have access to unpublished price sensitive information, and "insider" to include anyone with access to such information. The definition of unpublished price sensitive information is also expanded beyond financial results to include other strategic business information.
The document provides information on secretarial audits required for certain companies under Section 204 of the Companies Act, 2013. It explains that secretarial audits verify a company's compliance with legal and procedural requirements under various laws such as the Companies Act, Securities Contracts Regulation Act, and Foreign Exchange Management Act. Companies meeting certain criteria must provide a secretarial audit report certified by a Company Secretary in Practice. The document outlines the process, documents required, applicable laws, benefits, and penalties for non-compliance.
The document summarizes the Securities and Exchange Board of India (Prohibition of Insider Trading) Regulations, 2015. Some key points:
- The regulations came into force on May 13, 2015 and contain 5 chapters covering preliminary aspects, restrictions on insider trading, disclosure requirements, codes of conduct, and miscellaneous items.
- Important definitions include connected person, generally available information, insider, and unpublished price sensitive information.
- Insiders are restricted from trading based on unpublished price sensitive information or communicating such information, except on a need-to-know basis.
- Exceptions allow for communication of unpublished information for transactions approved as being in the company's best interest, provided it is disclosed to the public afterwards
Principle Based Regulation
Legislative Notes
Provides specific defenses
Introduced Trading Plans
Crucial Role for Compliance Officer
Everybody connected directly or indirectly is covered
What is Unpublished Price Sensitive Information?
What is the role of Compliance Officer in implementing this Regulations.
The document discusses insider trading regulations in the EU, UK, and Sweden. It defines insider information and persons possessing insider information such as PDMRs and related parties. PDMR duties include restrictions during closed periods and disclosure requirements. Insider dealing is prohibited, as is unlawful disclosure of insider information. Exemptions exist for legitimate behavior. Penalties for violations include fines, bans, and public warnings. The Financial Conduct Authority regulates financial markets in the UK. Case studies are provided on prosecuted instances of insider trading.
Insider trading involves trading in the securities of a company by individuals with access to non-public, material information about that company. Insiders include people connected to the company like directors, employees and family members. They are prohibited from trading based on unpublished price sensitive information. Insider trading regulations define insiders, unpublished price sensitive information, disclosure requirements and penalties for non-compliance. Violations are punishable by monetary penalties, imprisonment or both.
Insider Trading-Overview & Objective : A presentation at Indian Institute of Corporate Affairs by Mr. Manoj Kumar, Assistant Vice President, Corporate Professionals.
Key Highlights:
What is Insider Trading?
Insider trading evolution and theories : International Perspective, Misappropriation Theory, Privileged Information, Insider Trading & Corporate Governance, Indian Perspective
This document analyzes insider dealing laws in Sri Lanka by comparing them to laws in the US and UK. It defines insider dealing and explains why it should be prohibited to maintain fairness in share markets. The key Sri Lankan law that prohibits insider dealing is the Securities and Exchange Commission Act of 1987, though its definitions of "insider" and "price sensitive information" lack clarity. The document recommends amendments to strengthen prohibitions, expand liability, improve definitions, and increase enforcement of insider dealing laws in Sri Lanka.
Lawyer in Vietnam Oliver Massmann REAL ESTATE – FOREIGNERS BUYING PROPERTY ...Dr. Oliver Massmann
Lawyer in Vietnam Oliver Massmann REAL ESTATE – FOREIGNERS BUYING PROPERTY – WHAT YOU MUST KNOW:
GUIDING NOTES ON ISSUES RELATING TO THE CURRENT LAW ON LAND (2013) AND ITS GUIDING REGULATIONS FOR LAND TRANSACTIONS
This document discusses the concept of insider trading, providing examples and outlining the key dimensions. Insider trading involves someone connected to a company trading securities based on non-public information for personal gain at the expense of others. It gives the example of HLL purchasing shares in BBLIL weeks before announcing their merger. Insider trading undermines market integrity and investor confidence. While unethical, it is also illegal in most countries as it involves the breach of trust and unfair exploitation of information asymmetries.
Insider Trading-Analysis of Provisions, Offences and Penalties: A presentation at Indian Institute of Corporate Affairs by Mr. Manoj Kumar, Assistant Vice President, Corporate Professionals.
Key Highlights: Who is and Insider?, Insider Regulation 2(e), explanation to connected person, regulation 2(h), What Is Price Sensitive Information, OFFICER OF A COMPANY – REGULATION 2(g), Procedure for Investigation…
The document summarizes an insider trading case involving Hindustan Lever Limited (HLL), Unit Trust of India (UTI), Brooke Bond Lipton India Limited (BBLIL), and the Securities and Exchange Board of India (SEBI). HLL was planning a merger with BBLIL and bought shares of BBLIL from UTI before announcing the merger. SEBI accused HLL of insider trading but the charges were later absolved. The key issues debated were whether the merger information was unpublished, whether HLL gained unfair advantage, and whether the response absolving HLL was justified.
New Companies Act, 2013- implications on banksHarshul Shah
The document discusses various provisions of the Companies Act that apply to banking companies. It states that the Companies Act applies to banking companies except where inconsistent with the Banking Regulation Act. It also discusses restrictions on companies providing loans for share purchases, prohibitions on share buybacks during loan defaults, and prohibitions on accepting deposits from the public, which do not apply to banking companies. The financial statements of banking companies are not required to be in the form provided in Schedule III of the Companies Act, but in the form required under the Banking Regulation Act.
A review of insider trading law, with emphasis on its application to recent cases involving hedge funds. Reviews Preet Bharara’s scorecard, the Galleon case, materiality and the “Mosaic Theory," and tipping chains.
This document summarizes key aspects of government contracting in Colombia. It outlines five principles: objectivity in selection, procedural economy, transparency, equality, and responsibility. It notes that foreigners may participate under reciprocity agreements. All individuals and entities wishing to contract with the government, whether Colombian or foreign, must register in the bidders' registry unless foreign entities have no domicile or branch in Colombia. Contractors must submit a performance bond, with some exceptions. Public-private partnerships are allowed for up to 30% public funding of private initiative projects through public tender.
SEBI introduced regulations in 1992 to govern insider trading in India and prohibit the use of unpublished price sensitive information for securities trading. Insiders such as employees who have access to such information and connected persons such as family members cannot misuse this data for financial gain. Saira and her husband Sahil would be found guilty of insider trading as she shared non-public information about her company's acquisition plans with him, and he subsequently traded on this information for profit without following necessary pre-clearance procedures. SEBI regulations aim to promote fair securities markets and prevent information asymmetries through disclosure requirements and penalties for non-compliance, including heavy fines and imprisonment.
The document discusses insider trading, which refers to trading stocks based on non-public information. It notes that insider trading can be legal or illegal depending on when the insider makes the trade. Several categories of illegal insider trading are defined by the SEC. Legal insider trading requires timely disclosure to the SEC and company website. Factors that influence punishment for insider trading include the scope of people affected, gains made, and evidence. Regulations differ between countries and regions like the UK, EU, and India. Examples of insider trading cases involving Reliance Industries in India and hedge fund Omega Advisors in the US are also provided.
WHAT IS INSIDER TRADING???
Insider trading is dealing in securities of a listed company by any person who has knowledge of material “inside” information which is not known to the general public.
WHO IS INSIDER???
Insider is the person who is “connected” with the company , who could have the unpublished price sensitive information or receive the information from somebody in the company.
CONNECTED PERSON WITH DETAILED CLARIFICATION
Any person who is or has been associated with company, in any manner, during the six months prior to the concerned act:
An immediate relative to the connected person.
A banker of the company.
An official of stock Exchange or of clearing corporation.
A holding/associate/subsidiary company.
WHAT INCLUDES TRADING ?
WHO ARE INSIDER TRADERS?
Corporate officers, directors ,and employees who traded the corporations securities after learning of significant, confidential corporate developments.
Friends, business associates, family members and employees of law, banking and brokerage firms who were given such information to provide services to the corporation whose securities they traded.
GOVERNING REGULATIONS
Securities & Exchange Board Of India Act,1992
SEBI (Insider Trading) Regulations,1992
SEBI (PIT) (Amendment) Regulations,2002
SEBI (PIT) (Amendment) Regulations,2003
SEBI (PIT) (Amendment) Regulations,2008
SEBI (PIT) (Amendment) Regulations,2011
HISTORY BEHIND INSIDER TRADING IN INDIA
Insider trading in India was unhindered in its 130 year old stock market till about 1970.
In 1979,the Sachar Committee recommended amendments to the companies Act,1956 to restrict prohibit the dealings of employees. Penalties were also suggested to prevent the insider trading.
In 1989 the Abid Hussain Committee recommended that the insider trading activities may be penalized by civil and criminal proceedings and also suggested the SEBI formulate the regulations and governing codes to prevent unfair dealings.
UNPUBLISHED PRICE SENSITIVE INFORMATION
REGULATORY ASPECTS OF PROHIBITION OF INSIDER TRADING
SEBI prohibition of Insider Trading regulation 1995.
Section 11(2) E of companies act 1956 prohibits the insider trading.
WHY THERE IS NEED FOR PROHIBITION OF INSIDER TRADING???
As per SEBI the Prohibition of Insider Trading is required to make securities market:
Fair and Transparent.
To have a Level Playing Field for all the participants in the market.
For free flow of information and avoid information asymmetry.
CASE STUDY
HLL – BBLIL MERGER CASE
HLL-BROOKBOND LIPTON INDIA LTD
The case primarily involves 4 pa
This document summarizes a case study involving SEBI's allegations of insider trading against HLL for purchasing shares of BBLIL before publicly announcing a merger. The key points discussed are: SEBI's position that HLL was an insider with non-public information; HLL's defense that it was a party to the merger negotiations and the information was generally known; and the Ministry of Finance ultimately ruled that HLL was not guilty as it did not gain any unfair advantage from the share purchase.
The document discusses various legal structures for new business ventures including sole proprietorships, partnerships, and corporations. Sole proprietorships are owned and operated by one person who has unlimited liability. Partnerships involve two or more co-owners who share profits and losses. Corporations are separate legal entities where owners' liability is limited. The document also discusses intellectual property laws covering trademarks, patents, copyrights, trade secrets, and licensing. Product liability and ethics in business decision making are also addressed.
The document discusses several legal factors that affect businesses in their operating environment. These include organizational law, securities law, contract law, consumer protection laws, employee protection laws, health and safety laws, laws regarding termination of employees, immigration laws, and government procurement laws. All of these legal factors play an important role in determining the success of businesses around the world by creating the structure for how businesses can operate and protecting important stakeholders such as consumers, employees, and investors.
The document provides information on secretarial audits required for certain companies under Section 204 of the Companies Act, 2013. It explains that secretarial audits verify a company's compliance with legal and procedural requirements under various laws such as the Companies Act, Securities Contracts Regulation Act, and Foreign Exchange Management Act. Companies meeting certain criteria must provide a secretarial audit report certified by a Company Secretary in Practice. The document outlines the process, documents required, applicable laws, benefits, and penalties for non-compliance.
The document summarizes the Securities and Exchange Board of India (Prohibition of Insider Trading) Regulations, 2015. Some key points:
- The regulations came into force on May 13, 2015 and contain 5 chapters covering preliminary aspects, restrictions on insider trading, disclosure requirements, codes of conduct, and miscellaneous items.
- Important definitions include connected person, generally available information, insider, and unpublished price sensitive information.
- Insiders are restricted from trading based on unpublished price sensitive information or communicating such information, except on a need-to-know basis.
- Exceptions allow for communication of unpublished information for transactions approved as being in the company's best interest, provided it is disclosed to the public afterwards
Principle Based Regulation
Legislative Notes
Provides specific defenses
Introduced Trading Plans
Crucial Role for Compliance Officer
Everybody connected directly or indirectly is covered
What is Unpublished Price Sensitive Information?
What is the role of Compliance Officer in implementing this Regulations.
The document discusses insider trading regulations in the EU, UK, and Sweden. It defines insider information and persons possessing insider information such as PDMRs and related parties. PDMR duties include restrictions during closed periods and disclosure requirements. Insider dealing is prohibited, as is unlawful disclosure of insider information. Exemptions exist for legitimate behavior. Penalties for violations include fines, bans, and public warnings. The Financial Conduct Authority regulates financial markets in the UK. Case studies are provided on prosecuted instances of insider trading.
Insider trading involves trading in the securities of a company by individuals with access to non-public, material information about that company. Insiders include people connected to the company like directors, employees and family members. They are prohibited from trading based on unpublished price sensitive information. Insider trading regulations define insiders, unpublished price sensitive information, disclosure requirements and penalties for non-compliance. Violations are punishable by monetary penalties, imprisonment or both.
Insider Trading-Overview & Objective : A presentation at Indian Institute of Corporate Affairs by Mr. Manoj Kumar, Assistant Vice President, Corporate Professionals.
Key Highlights:
What is Insider Trading?
Insider trading evolution and theories : International Perspective, Misappropriation Theory, Privileged Information, Insider Trading & Corporate Governance, Indian Perspective
This document analyzes insider dealing laws in Sri Lanka by comparing them to laws in the US and UK. It defines insider dealing and explains why it should be prohibited to maintain fairness in share markets. The key Sri Lankan law that prohibits insider dealing is the Securities and Exchange Commission Act of 1987, though its definitions of "insider" and "price sensitive information" lack clarity. The document recommends amendments to strengthen prohibitions, expand liability, improve definitions, and increase enforcement of insider dealing laws in Sri Lanka.
Lawyer in Vietnam Oliver Massmann REAL ESTATE – FOREIGNERS BUYING PROPERTY ...Dr. Oliver Massmann
Lawyer in Vietnam Oliver Massmann REAL ESTATE – FOREIGNERS BUYING PROPERTY – WHAT YOU MUST KNOW:
GUIDING NOTES ON ISSUES RELATING TO THE CURRENT LAW ON LAND (2013) AND ITS GUIDING REGULATIONS FOR LAND TRANSACTIONS
This document discusses the concept of insider trading, providing examples and outlining the key dimensions. Insider trading involves someone connected to a company trading securities based on non-public information for personal gain at the expense of others. It gives the example of HLL purchasing shares in BBLIL weeks before announcing their merger. Insider trading undermines market integrity and investor confidence. While unethical, it is also illegal in most countries as it involves the breach of trust and unfair exploitation of information asymmetries.
Insider Trading-Analysis of Provisions, Offences and Penalties: A presentation at Indian Institute of Corporate Affairs by Mr. Manoj Kumar, Assistant Vice President, Corporate Professionals.
Key Highlights: Who is and Insider?, Insider Regulation 2(e), explanation to connected person, regulation 2(h), What Is Price Sensitive Information, OFFICER OF A COMPANY – REGULATION 2(g), Procedure for Investigation…
The document summarizes an insider trading case involving Hindustan Lever Limited (HLL), Unit Trust of India (UTI), Brooke Bond Lipton India Limited (BBLIL), and the Securities and Exchange Board of India (SEBI). HLL was planning a merger with BBLIL and bought shares of BBLIL from UTI before announcing the merger. SEBI accused HLL of insider trading but the charges were later absolved. The key issues debated were whether the merger information was unpublished, whether HLL gained unfair advantage, and whether the response absolving HLL was justified.
New Companies Act, 2013- implications on banksHarshul Shah
The document discusses various provisions of the Companies Act that apply to banking companies. It states that the Companies Act applies to banking companies except where inconsistent with the Banking Regulation Act. It also discusses restrictions on companies providing loans for share purchases, prohibitions on share buybacks during loan defaults, and prohibitions on accepting deposits from the public, which do not apply to banking companies. The financial statements of banking companies are not required to be in the form provided in Schedule III of the Companies Act, but in the form required under the Banking Regulation Act.
A review of insider trading law, with emphasis on its application to recent cases involving hedge funds. Reviews Preet Bharara’s scorecard, the Galleon case, materiality and the “Mosaic Theory," and tipping chains.
This document summarizes key aspects of government contracting in Colombia. It outlines five principles: objectivity in selection, procedural economy, transparency, equality, and responsibility. It notes that foreigners may participate under reciprocity agreements. All individuals and entities wishing to contract with the government, whether Colombian or foreign, must register in the bidders' registry unless foreign entities have no domicile or branch in Colombia. Contractors must submit a performance bond, with some exceptions. Public-private partnerships are allowed for up to 30% public funding of private initiative projects through public tender.
SEBI introduced regulations in 1992 to govern insider trading in India and prohibit the use of unpublished price sensitive information for securities trading. Insiders such as employees who have access to such information and connected persons such as family members cannot misuse this data for financial gain. Saira and her husband Sahil would be found guilty of insider trading as she shared non-public information about her company's acquisition plans with him, and he subsequently traded on this information for profit without following necessary pre-clearance procedures. SEBI regulations aim to promote fair securities markets and prevent information asymmetries through disclosure requirements and penalties for non-compliance, including heavy fines and imprisonment.
The document discusses insider trading, which refers to trading stocks based on non-public information. It notes that insider trading can be legal or illegal depending on when the insider makes the trade. Several categories of illegal insider trading are defined by the SEC. Legal insider trading requires timely disclosure to the SEC and company website. Factors that influence punishment for insider trading include the scope of people affected, gains made, and evidence. Regulations differ between countries and regions like the UK, EU, and India. Examples of insider trading cases involving Reliance Industries in India and hedge fund Omega Advisors in the US are also provided.
WHAT IS INSIDER TRADING???
Insider trading is dealing in securities of a listed company by any person who has knowledge of material “inside” information which is not known to the general public.
WHO IS INSIDER???
Insider is the person who is “connected” with the company , who could have the unpublished price sensitive information or receive the information from somebody in the company.
CONNECTED PERSON WITH DETAILED CLARIFICATION
Any person who is or has been associated with company, in any manner, during the six months prior to the concerned act:
An immediate relative to the connected person.
A banker of the company.
An official of stock Exchange or of clearing corporation.
A holding/associate/subsidiary company.
WHAT INCLUDES TRADING ?
WHO ARE INSIDER TRADERS?
Corporate officers, directors ,and employees who traded the corporations securities after learning of significant, confidential corporate developments.
Friends, business associates, family members and employees of law, banking and brokerage firms who were given such information to provide services to the corporation whose securities they traded.
GOVERNING REGULATIONS
Securities & Exchange Board Of India Act,1992
SEBI (Insider Trading) Regulations,1992
SEBI (PIT) (Amendment) Regulations,2002
SEBI (PIT) (Amendment) Regulations,2003
SEBI (PIT) (Amendment) Regulations,2008
SEBI (PIT) (Amendment) Regulations,2011
HISTORY BEHIND INSIDER TRADING IN INDIA
Insider trading in India was unhindered in its 130 year old stock market till about 1970.
In 1979,the Sachar Committee recommended amendments to the companies Act,1956 to restrict prohibit the dealings of employees. Penalties were also suggested to prevent the insider trading.
In 1989 the Abid Hussain Committee recommended that the insider trading activities may be penalized by civil and criminal proceedings and also suggested the SEBI formulate the regulations and governing codes to prevent unfair dealings.
UNPUBLISHED PRICE SENSITIVE INFORMATION
REGULATORY ASPECTS OF PROHIBITION OF INSIDER TRADING
SEBI prohibition of Insider Trading regulation 1995.
Section 11(2) E of companies act 1956 prohibits the insider trading.
WHY THERE IS NEED FOR PROHIBITION OF INSIDER TRADING???
As per SEBI the Prohibition of Insider Trading is required to make securities market:
Fair and Transparent.
To have a Level Playing Field for all the participants in the market.
For free flow of information and avoid information asymmetry.
CASE STUDY
HLL – BBLIL MERGER CASE
HLL-BROOKBOND LIPTON INDIA LTD
The case primarily involves 4 pa
This document summarizes a case study involving SEBI's allegations of insider trading against HLL for purchasing shares of BBLIL before publicly announcing a merger. The key points discussed are: SEBI's position that HLL was an insider with non-public information; HLL's defense that it was a party to the merger negotiations and the information was generally known; and the Ministry of Finance ultimately ruled that HLL was not guilty as it did not gain any unfair advantage from the share purchase.
The document discusses various legal structures for new business ventures including sole proprietorships, partnerships, and corporations. Sole proprietorships are owned and operated by one person who has unlimited liability. Partnerships involve two or more co-owners who share profits and losses. Corporations are separate legal entities where owners' liability is limited. The document also discusses intellectual property laws covering trademarks, patents, copyrights, trade secrets, and licensing. Product liability and ethics in business decision making are also addressed.
The document discusses several legal factors that affect businesses in their operating environment. These include organizational law, securities law, contract law, consumer protection laws, employee protection laws, health and safety laws, laws regarding termination of employees, immigration laws, and government procurement laws. All of these legal factors play an important role in determining the success of businesses around the world by creating the structure for how businesses can operate and protecting important stakeholders such as consumers, employees, and investors.
The document discusses six key provisions that should be included in an outsourcing agreement to prevent potential pitfalls: 1) Protect intellectual property, 2) Ensure data privacy, 3) Require consent for subcontracting, 4) Include an exit strategy, 5) Establish dispute resolution procedures, and 6) Agree on processes to ensure security standards. Having a well-drafted outsourcing agreement with these provisions can help minimize risks when outsourcing business functions overseas.
Key issues to consider when venturing into business in India. Some topics include repatriation of investments, taxation, court proceedings and IP issues.
The document discusses the legal requirements for starting a retail company in India. It outlines the steps needed to register a company, including obtaining a Director Identification Number, acquiring a digital signature certificate, registering as a new user on the MCA portal, and filing the appropriate incorporation form depending on company type. Additional registrations that may be required include registering the company name, obtaining a Permanent Account Number and Tax Deduction Account Number from the Income Tax department, a Tax Identification Number from the sales tax department, and complying with acts governing registration, stamps, easements, shops and establishments, trademarks, and employment.
Legal Considerations For Doing Bussiness In IndiaAccenture
A U.S. company has several options for setting up business operations in India, including incorporating an Indian subsidiary or acquiring an existing Indian company. They can also establish a liaison, project, or branch office. The company must consider issues like equity caps, regulatory compliance, profit repatriation, taxation, intellectual property protection, and dispute resolution through arbitration when establishing operations in India. Careful contract drafting and due diligence are important for a successful venture.
A former managing partner at an international law firm, Mario left the ethos of a large firm to make the transition to a practice that specializes in fostering business and entrepreneurial relationships. His interest is not in "billing time" but helping businesses implement best practices and strategies that anticipate the future of business.
Business law is essential for businesses to operate successfully within legal boundaries. It provides rules for areas like forming business entities, contracts, transactions, intellectual property, employment, and more. Understanding business law helps owners make choices to comply with regulations and avoid costly litigation. It also establishes standards for fair market participation and efficient business interactions. Overall, business law creates a structured legal system that supports commerce.
The authors explain how a Business Legal Checkup ("BLC") can be useful. BLC is a diagnostic tool small and medium size businesses can use to verify if legal aspects of their operation comply with law and to minimize risk, litigation and expense. When the BLC is completed, the business owner receives a lawyer’s report red-flagging matters which need correction, improvement or further legal advice. Contact the authors for more information.
The Right DC Business License Is Vitalwinsylee2020
To operate a business legally, a company must obtain the proper business license from local authorities. Licenses provide authorization to conduct business transactions and come with benefits like name protection and tax savings. Requirements vary between locations but generally involve registering the business and paying licensing fees, which differ based on the type and size of the company. Public safety-related businesses like those selling alcohol or food may require additional permits on top of the basic license.
Business Registration, Negosyo Center Operation and Investment OpportunitiesROCHELLE OTOC
This document provides an overview of business registration requirements in the Philippines. It defines key terms related to business permits and licensing. It explains the different agencies where businesses can register - DTI for sole proprietorships, SEC for corporations, CDA for cooperatives, and DOLE for workers' associations. The standard 5-step process for business registration is outlined, including firm name registration, business permitting, mandatory registrations, and obtaining other licenses and permits. Requirements for each step are also detailed.
There are complex securities laws that can be triggered in the business acquisition context. Because the penalties for securities violations are severe, it is always worth the time to have securities counsel review the transaction and confirm compliance with the securities laws.
Legal And Regulatory Requirements Related To An Organization MansiGupta413277
Taking steps to meet your legal obligations might seem like a management no-brainer, but only fulfilling your minimum requirements might result in missed opportunities. Understanding the reasons for the various rules, laws and regulations that govern your business will help you take advantage of any benefits they offer while ensuring you stay in compliance at all times.
Decoding the legal framework for entrepreneursParth Jain
This presentation attempts to inform startups and entrepreneurs about some basic legal contracts and the initiatives undertaken by the Government of India under the Startup India Action Plan.
This document provides an overview of commercial law and related topics. It defines commercial law as the set of laws related to trade and sales, including contract law, property law, business regulations, corporate law, intellectual property law, and tax law. It also discusses the key elements of a valid contract, common legal issues in commercial law such as contract violations, and the components of an effective internal control system.
Construction contracts can contain terms that impact your company’s bottom line. Reviewing them carefully prior to signing is indispensable, and can save your company time and money. This contract review guide is meant to be a starting point for reviewing contracts in general…
Legal structures to attract investors and penetrate the global market EkoInnovationCentre
Private equity funding and global expansion require careful legal structuring and due diligence. Private equity involves providing equity capital to growing companies in exchange for ownership stakes. The process includes expressing interest, conducting due diligence on both parties, negotiating terms, and closing with signed agreements. Both companies and investors must research the other thoroughly. Expanding globally requires understanding foreign laws, choosing governing law for contracts, selecting the proper legal entity like an LLC or joint venture, and ensuring compliance with corporate governance rules. Careful legal and risk assessment is vital for attracting investors and penetrating new markets.
The document is a checklist for conducting a legal audit of a company. It provides an overview of key areas that should be examined, including organizational records, financial matters, properties, litigation, business practices, employment matters, intellectual property, websites, and other material agreements. The purpose is to understand the company's current legal condition, identify any issues, and take appropriate actions to correct problems or prevent future risks. It cautions not to begin investigating items on the checklist without first consulting an attorney to maintain legal protections.
The document discusses various types of regulations that protect businesses and the public. It outlines regulations regarding patents, copyrights, trademarks, food and drug regulations, non-food product regulations, information regulation, state and local regulations, licensing, public franchising, building codes, and zoning laws. The purpose of these regulations is to protect intellectual property, consumer safety, privacy, fair competition between businesses, and local community development.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Call8328958814 satta matka Kalyan result satta guessing➑➌➋➑➒➎➑➑➊➍
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Profiles of Iconic Fashion Personalities.pdfTTop Threads
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
1. LEGAL REQUIREMENTS OF YOUR BUSINESSBefore starting a business, the legal environment of your establishment should be researched. There are many laws, rules, and regulations that must be followed to start and run your business. Almost every aspect of your business is under some form of legal ruling. Specific forms, licenses and other documentation must be filed with state and local government offices in order to begin. Without this documentation, you may be prevented from opening. It is important for you to take a close look at California's legal business requirements.Aspects of Business under Legal Guidelines Major aspects of business governed by business law can be divided into the following areas: legal structure, business name, trademarks and patents, licensing and permits, contracts and legal liability.Legal Structure What legal structure will your business take? This decision is of primary importance because laws governing many aspects of the business vary depending on its legal structure. The four main categories are: sole proprietorship, partnership, Limited Liability Company and corporation. These four types of business entities are discussed in the chapter on quot;
Structuring Your Businessquot;
.Business Name Even though a business name has no magic that will guarantee success, the name is nevertheless very important to a new business. As a small business prospers and grows, the public will begin to recognize and associate the name with the product or service.There is a body of law that specifically governs the business nameLicenses and Permits Several federal, state and local licenses and permits are required for starting a new business. Before you even apply for a license, you must first find out the land use requirements, zoning requirements and detailed building code requirements for your type of business, and should do so before signing a rental, lease, or purchase agreement. Requirements may vary for each incorporated city in the county, and the county itselfPermits required for new businesses are different depending on the type of business. The most common licenses and permits include: a business license, building permit, sales permit, State ID and sales tax schedule, and occupational license.Home Occupation Permit To set up a business in your home, you first need to make sure that the proposed use of the property is consistent with the zoning. To check the zoning, you first must know the Assessor's Parcel Number of the property. If you are the property owner, this can be obtained from your property tax statement. If you are a renter or lessee, your landlord will have this number. If this number is not readily available, contact (you will need the exact address of the property):Sign Permit If you are planning to place a sign on the exterior of your business, you need a Sign Permit. Regulations regarding the types of signs and placement depend on the zoning for the parcel and the type of business. The Sign Permit application requires you (the business owner) or your sign contractor to submit drawings indicating the advertising message, location, dimensions, construction, electrical wiring and components and the method of attachment. The fee for the permit depends usually on the value of the sign.Building Permit If you are planning to construct your place of business, or do any major remodeling, you must have a building permit. Special permits may be required for parking, food preparation, fire safety, discharge of pollutants, etc. If you are building within city limits, there are specific forms that must be filedIf you are building outside a city, specific forms must be filed with the county. Seller's Permit If you are planning to sell items that are subject to state sales tax, you must also apply for a seller's permit for each place of operation. This quot;
resale numberquot;
will eliminate the need to pay sales tax when you purchase items for resale in your business. A personal Statement of Financial Condition and estimations of monthly sales and expenses may be required with new applications. There is no fee required for a sales permit; however, under certain conditions a security deposit may be required. To apply contact:Occupational Licenses There are many occupations that require licensing in California. For information on this subject, contact:Contracts A contract creates legal rights and duties between people. Business contracts can be divided into three groups: commercial contracts, employment contracts, and real estate transactions.Commercial Contracts: The laws of commercial contracts originate from many sources, but the most important law concerning commercial contracts is the Uniform Commercial Code. It is a comprehensive commercial law adopted by every state, covering the sale and purchase of goods. It does not apply to services.Employment Contracts: Employment contracts are governed by labor laws. An entire chapter of the legal profession specializes in this very complex and constantly changing arena.Real Estate Transactions: Real estate transactions involve the lease or purchase of land or property for your business premises. Contact a reputable real estate person, or ask advice from a bank or title company.Liability A business has three types of liabilities: product liability, legal liability, and employment liability.Product Liability Product Liability is a business' responsibility to ensure that the product it sells is safe for the public to use. It also covers warranties a business offers for its products. You must make sure that you understand your responsibility, as a business owner, to the legal environment. Legal Liability: Legal liabilities are the obligations a business owes to the government, such as abiding by the business law, the contract law, the tax law, the permit and licensing requirements. Legal liability also includes the protection against deceptive trade practices listed under the Uniform Deceptive Trade Practices Act.Employment Liability: Employment liability is tied closely to employment contracts and labor laws. There is an entire body of law which regulates the number of hours worked, minimum wage, health benefits, discrimination, undocumented alien workers, termination of employment, retirement benefits, vacation, insurance, union contracts, etc.Injury and Illness Prevention Program California's worker safety law requires businesses with 10 or more employees to have a written comprehensive safety program that identifies work place hazards. Employers also must have a safety training program, a way for workers to identify hazards with no fear of reprisal and a person responsible to implement the plan. Employers with fewer than 10 workers must comply with the law, but do not need all of the regulations in writing. Penalties for violators range from fines, to closing down operations, to jail time. <br />The Legal Basis <br />The legal basis for imposing licensing control over strategic commodities in Hong Kong is the Import and Export (Strategic Commodities) Regulations (to be referred as quot;
the Regulationsquot;
hereafter) made under the Import and Export Ordinance, Chapter 60, Laws of Hong Kong. Articles contained in the Schedules to the Regulations are regarded as strategic commodities, the import and export of which must be covered by valid licences issued by the Director-General of Trade and Industry. The Regulations contain four Schedules. Schedule 1 is the full list of strategic commodities subject to import and export licensing control. Schedule 2 contains products which, in addition to being subject to import and export control, are controlled even if they are in transit through Hong Kong. Schedules 3 and 4 are items and activities subject to end-use control (also read paragraph 19 below).<br />Control on Encryption Products<br />Encryption products are controlled under the Wassenaar Arrangement (WA), an international control regime overseeing the controls over the transfer of both munitions list items and dual-use goods and technology. Encryption products fall under Category 5, Part 2 - Information Security of the Dual-use Goods List of the WA. In implementing licensing control on strategic commodities, Hong Kong follows closely the controls adopted by the international control regimes. According to the current control maintained by the WA, encryption products with a symmetric key length above 56-bits are subject to control. Accordingly, import and export of such encryption items are subject to licensing control under the Import and Export (Strategic Commodities) Regulations of Hong Kong. For traders' easy reference, the broad categorisation of encryption hardware, software and technology subject to control in Schedules 1 and 2 to the Regulations are set out below: Traders should note in particular that encryption products also fall under Schedule 2 to the Regulations. This means that import and export licences are required even if these products are merely in transit through Hong Kong (i.e. the goods remain at all times on the vessel or aircraft in or on which they are brought into Hong Kong). <br />Exemptions of Control<br />While the Regulations impose control over encryption products with a symmetric key length above 56-bits, exemptions are granted for products, of whatever key length provided that they are under either one of the following scenarios:<br />accompanying the user, for the user's personal use; or<br />meeting all of the following conditions : <br />Generally available to the public by being sold, without restriction, from stock at retail selling points by means of any of the following : <br />Over-the-counter transactions; <br />Mail order transaction; <br />Electronic transactions; or <br />Telephone call transactions; <br />The cryptographic functionality cannot easily be changed by the user; <br />Designed for installation by the user without further substantial support by the supplier; and<br />When necessary, details of the items are accessible and will be provided, upon request, to the appropriate authority in the exporter's country in order to ascertain compliance with conditions described in paragraphs (a) to (c) above.<br />Licensing Procedures for Paper Applications<br />(A) Application Forms<br />Licence applications for strategic commodities including encryption products should be made on Import Licence (Strategic Commodities) Application Form [TID 501 (Rev 2006)] (Annex A) (fillable pdf format) and Export Licence (Strategic Commodities) Application Form [TID 502 (Rev 2006)] (Annex B) (fillable pdf format) Note 1. These forms are free of charge and available at the Customer Service Counter of Strategic Trade Controls Branch at Room 516B on 5/F, Trade and Industry Department Tower. They can also be downloaded from the Strategic Commodities Control System Website (quot;
SC Websitequot;
) at http://www.stc.tid.gov.hk. Applicants are required to attach a copy of the technical specifications/data sheets for each application to enable the Classification Section of TID to confirm whether the goods are strategic commodities. Licence applications should be submitted to the Strategic Trade Controls Branch at Room 516B on 5/F, Trade and Industry Department Tower. A numbered receipt will be issued for each licence application. Approved import and export licences are valid for six months and three months respectively. Specimen of completed import and export licence applications are at Annexes C (pdf foramt) and D (pdf format) respectively.<br />(B) Declaration and Supporting Documents<br />In addition to basic application particulars, the following information/documents will also be required to support a licence application covering encryption products : <br />the name and full address of end-user;<br />the specific end-use of the goods concerned;<br />if the shipment is supported by an export/re-export authorization issued by the supplier (originating) country/place, essential details of the licence or licence exception; and<br />other supporting documents including - <br />a copy of the export licence issued by the supplier (originating) country/ place of the goods giving explicit approval to the export/re-export concerned. If the foreign export licence is written in languages other than English or Chinese, a translated version (either in English or Chinese) prepared by a registered translation company in Hong Kong or certified correct by the relevant embassy in Hong Kong will be essential to the processing of the case;<br />the technical specifications and/or the completed Cryptography Questionnaire (Annex E) (fillable pdf format). This questionnaire is for ascertaining whether the products can meet the criteria listed in paragraph 5(ii) and giving the general technical features of the products. Such documents should be submitted for every product unless pre-classification has been made; <br />the original End-user Statement duly completed by the end-user (Annex F (fillable pdf format) for import licence application and Annex G (fillable pdf format) for export licence application); and<br />Depending on the circumstances of individual case, the following documents may also be required : <br />original of the Importer/End-user Statement for supporting import licence applications covering the goods (for imports from the UK only) (Annex H) (fillable pdf format); and/or<br />documents in support of the business nature and production situation of the end-user (e.g. HKF5 Form at Annex I) (fillable pdf format); and/or<br />a copy of the valid business registration certificate of the applicant or local end-user; and/or <br />an International Import Certificate or import permit/authorization issued by the relevant authorities of the importing/destination countries/places (for supporting export licence applications).<br />Licensing Procedures for Electronic Applications<br />Companies can also apply licences electronically. The E-Application for import and export licences can be made through companies' E-Accounts in the Strategic Commodities Control System Website (quot;
SC Websitequot;
) under the program of quot;
Apply for Import Licencequot;
or quot;
Apply for Export Licencequot;
provided at the E-Application menu (At http://www.stc.tid.gov.hk > Login Your E-Account > E-Applications > Import/Export Licence Applications > Apply for Import/Export Licence). Same as paper applications, E-Applicants should download and complete all supporting documents in paragraph 7 (d) and afterwards, scan, upload and submit the duly completed forms together with the related E-Import/Export Licence Application. Alternatively, the supporting documents can be submitted to TID by person or by fax (2394 6515). As for all E-Applications, upon successful submission, E-Applicant should follow the instructions to print out by themselves the receipts for future collection of the approved licences. In this connection, applicants are reminded that the provision of scanned or faxed copy of the End-user Statements, Importer/End-user Statements and HKF5 Forms as required in paragraph 7 (d) (iii) to (v) above will only serve to facilitate TID in processing their applications more expeditiously. It is however not equivalent to the original signed copy of the End-user Statements, Importer/End-user Statements and HKF5 Forms which is/are required to be submitted to TID in all circumstances. Thus, after making the E-Application, applicants should make sure to deliver the original signed End-user Statements, Importer/End-user Statements and HKF5 Forms to TID as soon as possible. TID will withhold approval and issuance of licences unless and until the original End-user Statement(s)/ Importer/End-user Statement(s) /HKF5 Form(s) are received. <br />To use and submit E-Applications, companies are required to complete a special registration with TID in advance. Details of the special registration and other requirements for the use of E-Applications can be found in the specific sections in SC Website: <br />Issuance of Licence<br />If licence applications, regardless of paper or electronic, are approved, paper licences will be issued. Under normal circumstances, applications duly completed and supported by the documents required will be processed within 2.5 clear working days after the date of submission of the licence application. They are ready for collection at Room 516B, 5/F of Trade and Industry Department. Please refer to the Strategic Trade Controls Circular No. 4/04, quot;
New Application Forms and Import and Export Licences of Strategic Commoditiesquot;
for details regarding the new format of licences introduced in April 2004. For cases with complications or if additional technical details, other documents and information and/or clarifications are necessary, it may take longer time to process the applications. Applicants may check whether their applications have been processed and are ready for collection by visiting the SC website at http://www.stc.tid.gov.hk. In any event, applicants are advised to submit their applications well in advance of shipments. Application forms that are not properly completed or not accompanied by all the necessary documentation will be deferred/rejected.<br />Licence Conditions<br />On top of the standard licence conditions, the Director-General of Trade and Industry may, depend on the circumstances of individual cases, impose special and additional conditions on approved licences. At the time of receiving the licences, companies are advised to read the designated part, quot;
Licence Conditionsquot;
, for the imposition of both the standard and special conditions. <br />For encryption products, one very common special licence condition is that quot;
Prior notice to and approval from the Department may be required if the goods are intended for further resale/transfer/disposalquot;
. Licensees imposed with this condition should be very careful in handling any subsequent resale/transfer/disposal of the goods covered by the licence. They should first submit to the Strategic Trade Controls Branch written applications made in the designated form SC047 (Annex J) (fillable pdf format). To facilitate TID's consideration on the applications, documents like original enduser-statement duly completed by the proposed end-user, copy of business registration certificate of the proposed recipient and end-user, valid export permit/authorization issued by the product's originating/exporting country (place) giving approval to the proposed resale/transfer etc. must also be submitted. TID will give due consideration on the application and notify the licensee in writing whether the request can be approved. Only that TID's written approval has been obtained should the licensee proceed with the resale/transfer/disposal of the goods. Otherwise, the licensee would be liable to breaching of the licence conditions. <br />Companies can also apply electronically for resale/transfer/disposal of strategic commodities provided that the relevant import licences are obtained through E-Applications. E-Application for resale/transfer/disposal can be made through companies' E-Accounts in the Strategic Commodities Control System Website (quot;
SC Websitequot;
) under the program of quot;
Apply for Resale/Transfer/Disposal of Products Under Approved Import Licencequot;
provided at the E-Application menu (Unlike paper applicant, E-Applicants for resale/transfer/disposal need not to wait for TID's written notification on the results of their applications. They could efficiently know it by checking the application status through their E-Accounts. And if the application is approved, the applicants can simply print out by themselves the approval status of the application as an evidence of TID's approval on the resale/transfer/disposal request. <br />Pre-classification Service<br />For applicants who frequently import or export the same types of encryption products, it is advisable for them to make use of our pre-classification service. In brief, traders will be advised of the control status of a product through this service. Applicants should download the pre-classification application form SC013 (Rev 2004) (fillable pdf format) from SC website, attach with corresponding technical specifications and where applicable, questionnaire(s) mentioned in paragraph 7(d)(ii) above. After pre-classification, the Department will assign a Pre-Classification Reference Number to the product concerned. By quoting this reference number on future licence applications covering the same goods, the requirement to submit the technical specification/data sheets is waived. <br />Export Control of Originating/Supplier/Foreign Exporting Country (Place) on Encryption Products<br />Traders should note that the originating/supplier/foreign exporting country (place) of encryption products, especially if it is a member of the Wassenaar Arrangement Note 2, may impose export control over the products by ways of individual licence, general licences, licence exceptions or other mechanisms. Since it is the policy of Hong Kong to maintain a licensing system complementary to the export control arrangement of our trading partners, TID will only approve licences to cover shipments that are in full compliance with the export control regulations of the originating/supplier/foreign exporting country (place). To ascertain such compliance, licence applicants are required to provide additional supporting documents that can be but need not be confined to: the relevant government authorities' determination/ classification result indicating that the goods have been reviewed and classified to be eligible for export to the proposed destination(s)/end-user(s), individual export licence, the review request/notification submitted by the products' manufacturer to the relevant government authorities, manufacturer's certification letter etc.. <br />For US-origin encryption products, traders should be aware that the US Department of Commerce (DoC) revises their control over encryption products from time to time. In addition to individual licences, US Licence Exception ENC might be applicable to certain products subject to prior authorization from the DoC. Exports of certain type of encryption goods to specific type of end-users or countries (places) might not require prior review. <br />Articles in Transit<br />For applications covering transit of encryption products through Hong Kong, in addition to the requirements set out in paragraph 7 above, applicants should :<br />submit import and export licence applications together to the Department; and<br />declare on the licence applications that the goods are in transit, state the transport mode and name of the vessel or flight number, and expected arrival and departure dates. For E-Applicants, tailor-made declaration for this purpose is available for selection at Part I quot;
Preparation of Declaration Listsquot;
of the E-Import Licence Application menu.<br />Exporters may also be required to provide a landing certificate or delivery verification certificate issued by the country (place) of destination to the Director-General of Trade and Industry within 12 weeks after the date of shipment. <br />End-use Controls<br />In addition to the control imposed on specific items as set out in Schedules 1 and 2 to the Regulations, traders are reminded that end-use control are imposed under Schedules 3 and 4 to the Regulations. The Regulations impose licensing requirement on articles specified in Schedule 3 to the Regulations (Annex K) (pdf format), or any technological document containing information relating to any such article: <br />if the importer/exporter knows that the article or document is intended or likely to be used in any activity related to nuclear, chemical or biological weapons or missiles capable of delivering them as specified in Schedule 4 to the Regulations (Annex L (pdf format) refers); or<br />if the importer/exporter has grounds for suspecting that the article or document may be used in any activity specified in Schedule 4. <br />Import and/or export licences are required if the end-use of the goods fall under (a) and/or (b) above.<br />Reminder<br />Section 6A of the Import and Export Ordinance stipulates that no person shall import or export any article specified in the Schedules to the Import and Export (Strategic Commodities) Regulations except under and in accordance with a licence issued by the Director-General of Trade and Industry. Any person who contravenes the provision commits an offence and is liable : <br />on summary conviction to a fine of HK$500,000 and to imprisonment for two years; and<br />on conviction on indictment to an unlimited fine and to imprisonment for seven years.<br />In addition to prosecution, the Department may impose administrative actions against these persons. Such administrative actions may involve but shall not necessarily be confined to, suspension of a licence, refusal to issue a licence, debarment of all licensing facilities, etc.<br />Enquiry<br />If you have any enquiry concerning licensing requirements for encryption products, please contact Miss Angel Sham at 2398 5639. For specific technical questions or matters concerning classification of the goods and the pre-classification service, please call the general enquiry desk of the Classification Section of Strategic Trade Controls Branch at 2398 5587. Enquiry could also be sent by fax to 2396 3070 or by email to stc@tid.gov.hk.<br />Procedure for Import and Export<br />General Provisions<br />Goods are imported in India or exported from India through sea, air or land. Goods can come through post<br />parcel or as baggage with passengers. Procedures naturally vary depending on mode of import or export.<br />Procedures discussed in this Chapter are applicable for imports by sea, air or land, but not as baggage or postal<br />dispatch.<br />COMPUTERISATION OF CUSTOMS WORK - Work of customs at Delhi airport has been computerized.<br />Work at Mumbai port is also computerized. Whenever the work is computerized, documents like IGM and Bill<br />of Entry have to be filed electronically. Procedure in computerized environment has been specified in CC, New<br />Delhi PN 22/98 dated 8.5.1998. Guidelines for preparing data file for Bill of Entry and shipping bills for<br />Mumbai Customs House has been prescribed vide PN 108/99 dated 30-9-1999 and PN 10/2001 dated<br />30.1.2001.<br />ENTRY – ‘Entry’ in relation to goods means an entry made in a Bill of Entry, Shipping Bill or Bill of Export. It<br />includes (a) label or declaration accompanying the goods which contains description, quantity and value of the<br />goods, in case of postal articles u/s 82 (b) Entry to be made in case of goods to be exported (c) Entry in respect<br />of goods imported which are not accompanied by label or declaration made as per provisions of section 84.<br />[section 2(16)].<br />AMENDMENT TO DOCUMENTS - Importer, exporter or 'Person In charge' have to submit various<br />documents to customs authorities like Bill of Entry, Import Manifest, Export Manifest etc. Some times, it may<br />become necessary to amend the document due to various reasons like change in classification, clerical mistake<br />in document, change in unloading / loading plan of vessel etc. In such case, permission to amend these<br />documents have to be obtained from customs authorities. [section 149]. Such permission can be given if there<br />are no fraudulent intentions.<br />In case of bill of entry, shipping bill or bill of export, it can be amended after clearance only on the basis of<br />documentary evidence which was in existence at the time the goods were cleared, warehoused or exported, and<br />not on basis of any subsequent document. [proviso to section 149].<br />Customs Station - Imported goods are permitted to be unloaded only at specified places. Similarly, goods can<br />be exported only from specified area. In view of this, a definition of ‘Customs Station’ is important.<br />Customs area means all area of Customs Station and includes any area where imported goods or export goods<br />are ordinarily kept pending clearance by Customs authorities. Thus, ‘Customs Area’ could include some area<br />even outside the ‘Customs Station’. Customs Station means (a) customs port (b) inland container depot (c)<br />customs airport and (d) land customs station.<br />Section 7 of Customs Act empowers CBEC (Board) to appoint * Customs ports * Customs airports * Places for<br />inland container depots * Coastal ports. These are appointed by issuing a notification. Section 8 authorises<br />Commissioner of Customs to approve proper places in any customs port, customs airport or costal port for<br />unloading and loading of goods or for any class of goods and specify the limits of customs area. Thus, the place<br />(city / town / village etc.) is approved by CBEC, while exact location within that city / town / village is<br />approved by Commissioner of Customs.<br />Import Procedures<br />Procedures have to be followed by ‘person-in-charge of conveyance’ as well as the importer.<br />WHO IS 'PERSON IN CHARGE' - As per section 2(31), 'person in charge' means (a) In case of vessel - its<br />master (b) In case of aircraft - its commander or pilot-in-charge (c) In case of train - its conductor or guard and<br />(d) In case of vehicle or other conveyance - its driver or other person in charge.<br />The significance of this definition is -<br />He is responsible for submitting Import Manifest and Export Manifest<br />He is responsible to ensure that the conveyance comes through approved route and lands at approved place<br />only.<br />He has to ensure that goods are unloaded after written order, at proper place. Loading also has to be only after<br />permission.<br />He has to ensure that conveyance does not leave without written order of Customs authorities.<br />He can be penalised for (a) Giving false declaration and statement (b) shortages or non-accounting of goods<br />in conveyance<br />Procedure to be followed by the Carrier - The 'person in charge of conveyance' (carrier of goods) has to follow<br />prescribed procedure.<br />Arrival at customs port/airport only - Section 29 provides that person-in-charge of a vessel or an aircraft<br />entering India shall call or land at customs port or customs airport only. It can land at other place only if<br />compelled by accident, stress of weather or other unavoidable cause. In such case, he should report to nearest<br />police station or Customs Officer. While arriving by land route, the vehicle should come by approved route to<br />‘land customs station’ only.<br />Import Manifest / Report- Person-in-charge of vessel, aircraft or vehicle has to submit Import Manifest / Report.<br />[also termed as IGM - Import General Manifest]. (In case of a vessel or aircraft, it is called import manifest,<br />while in case of vehicle, it is called import report.) The import manifest in case of vessel or aircraft is required<br />to be submitted prior to arrival of a vessel or aircraft. Import report (in case of vehicle) has to be submitted<br />within 12 hours of arrival at the customs station. If the report / manifest could not be submitted within<br />prescribed time, person-in-charge or any person specified as responsible by a notification is liable to penalty<br />upto Rs 50,000. Such penalty will not be imposed if the excise officer is satisfied that there was sufficient cause<br />for the delay. [section 30(1)].<br />IGM can be submitted electronically through floppy where EDI facility is available.<br />IMPORT MANIFEST IS REQUIRED TO BE SUBMITTED BEFORE ARRIVAL OF AIRCRAFT OR<br />VESSEL - Section 30(1) of Customs Act provides that Import Manifest should be filed before arrival of ship or<br />aircraft. Normally, the Agents submit the Import Manifest before arrival, so that maximum possible formalities<br />are completed before vessel or aircraft arrives. This also enables importers to file ‘Bill of Entry’ in advance.<br />Grant of Entry Inwards by Customs Officer - Unloading of cargo can start only after Customs Officer grant<br />‘Entry Inwards’. Such entry inwards can be granted only when berthing accommodation is granted to a vessel.<br />If there is heavy congestion at port, shipping berth may not be available and in such case, ‘Entry Inwards’<br />cannot be granted. This date is highly relevant for determining rate of customs duty applicable.<br />Carrier responsible for shortages during unloading - If the goods are short landed, the carrier is liable to pay<br />penalty upto twice the amount of duty payable on such short landed goods. It has been held that tally sheet<br />prepared by Port Trust authorities on unloading of goods is a statutory document and should be accepted in<br />preference to steamer survey - Scindia Steam Navigation v. CC - 1988 (33) ELT (CEGAT) followed in re India<br />Steamship Co. Ltd. - 1992 (57) ELT 510 (GOI).<br />Procedure by Importer - The importer importing the goods has to follow prescribed procedures for import by<br />ship/air/road. (There is separate procedure for goods imported as a baggage or by post.)<br />Bill of Entry - This is a very vital and important document which every importer has to submit under section 46.<br />The Bill of Entry should be in prescribed form. The standard size of Bill of Entry is 16quot;
× 13quot;
. However, for<br />computerisation purposes, 15quot;
× 12quot;
size is permitted. (Mumbai Customs Public Notice No. 142/93 dated 3-11-<br />93).<br />Bill of Entry should be submitted in quadruplicate – original and duplicate for customs, triplicate for the<br />importer and fourth copy is meant for bank for making remittances.<br />Under EDI system, Bill of Entry is actually printed on computer in triplicate only after ‘out of charge’ order is<br />given. Duplicate copy is given to importer.<br />Types of Bill of Entry - Bills of Entry should be of one of three types. Out of these, two types are for clearance<br />from customs while third is for clearance from warehouse.<br />BILL OF ENTRY FOR HOME CONSUMPTION - This form, called ‘Bill of Entry for Home Consumption’, is<br />used when the imported goods are to be cleared on payment of full duty. Home consumption means use within<br />India. It is white coloured and hence often called ‘white bill of entry’.<br />BILL OF ENTRY FOR WAREHOUSING - If the imported goods are not required immediately, importer may<br />like to store the goods in a warehouse without payment of duty under a bond and then clear from warehouse<br />when required on payment of duty. This will enable him to defer payment of customs duty till goods are<br />actually required by him. This Bill of Entry is printed on yellow paper and often called ‘Yellow Bill of Entry’. It<br />is also called ‘Into Bond Bill of Entry’ as bond is executed for transfer of goods in warehouse without payment<br />of duty.<br />BILL OF ENTRY FOR EX-BOND CLEARANCE - The third type is for Ex-Bond clearance. This is used for<br />clearance from the warehouse on payment of duty and is printed on green paper. The goods are classified and<br />value is assessed at the time of clearance from customs port. Thus, value and classification is not required to be<br />determined in this bill of entry. The columns in this bill of entry are similar to other bills of entry. However,<br />declaration by importer is not required as the goods are already assessed.<br />RATE OF DUTY FOR CLEARANCE FROM WAREHOUSE - It may be noted that rate of duty applicable is<br />as prevalent on date of removal from warehouse. Thus, if rate has changed after goods are cleared from customs<br />port, customs duty as assessed on yellow bill of entry and as paid on green bill of entry will not be same.<br />Mention of BIN on Bill of Entry – A BIN (Business Identification Number) is allotted to each importer and<br />exporter w.e.f. 1.4.2001. It is a 15 digit code based on PAN of Income Tax (PAN is a 10 digit code). [Earlier an<br />EC (Import Export code) number issued by DGFT was required to be mentioned on Bill of Entry].<br />Filing of Bill of Entry - Normally, Bill of Entry is filed by CHA on behalf of the importer. Customs work at<br />some ports has been computerised. In that case, the Bill of Entry has to be filed electronically, i.e. through<br />Customs EDI system through computerisation of work. Procedure for the same has been prescribed vide Bill of<br />Entry (Electronic Declaration) Regulations, 1995.<br />Documents to be submitted by Importer - Documents required by customs authorities are required to be<br />submitted to enable them to (a) check the goods (b) decide value and classification of goods and (c) to ensure<br />that the import is legally permitted. The documents that are essentially required are : (i) Invoice (ii) Packing<br />List (iii) Bill of Lading / Delivery Order (iv) GATT declaration form duly filled in (v) Importers / CHAs<br />declaration duly signed (vi) Import Licence or attested photocopy when clearance is under licence (vii) Letter of<br />Credit / Bank Draft wherever necessary (vii) Insurance memo or insurance policy (viii) Industrial License if<br />required (ix) Certificate of country of origin, if preferential rate is claimed. (x) Technical literature. (xi) Test<br />report in case of chemicals (xii) Advance License / DEPB in original, where applicable (xiii) Split up of value<br />of spares, components and machinery (xiv) No commission declaration. – A declaration in prescribed form<br />about correctness of information should be submitted. – Chapter 3 Para 6 and 7 of CBE&C’s Customs Manual,<br />2001.<br />The Noting is now done electronically in large ports, while it is done manually in small ports. Thoka Number<br />(Serial Number) is given while noting the Bill of Entry.<br />Electronic submission under EDI system – Where EDI system is implemented, formal submission of Bill of<br />Entry is not required, as it is generated in computer system. Importer should submit declaration in electronic<br />format to ‘Service Centre’. A signed paper copy of declaration for non-repudiability should be submitted. Bill of<br />Entry number is generated by system which is endorsed on printed check list. Original documents are to be<br />submitted only at the stage of examination.<br />Assessment of Duty and Clearance<br />The documents submitted by importer are checked and assessed by Customs authorities and then goods are<br />cleared. Section 2(2) defines ‘assessment’ as follows – ‘Assessment’ includes provisional assessment,<br />reassessment and any order of assessment in which the duty assessed is Nil. Thus, ‘assessment’ includes ‘Nil’<br />assessment.<br />Noting of Bill of Entry - Bill of Entry submitted by importer or Customs House Agent is cross-checked with<br />‘Import Manifest’ submitted by person in charge of vessel / carrier. It is noted if the description tallies. ‘Noting’<br />really means taking on record by customs officer. This date is relevant for determining rate of customs duty.<br />Thoka number (serial number) is given in the import section. Otherwise, it is returned for clarifications. In case<br />of EDI system, noting is done by the system itself which also generates bill of entry number.<br />Date of presentation of bill of entry is highly relevant and the rate of duty as applicable on this date will be<br />considered for calculating the duty payable. Bill of Entry is accepted only after proper scrutiny vis-a-vis import<br />manifest and various declarations given in bill of entry and attached documents like invoice, bill of lading etc. If<br />such documents are not attached, the authorities can refuse to accept the Bill of Entry, and hence submission of<br />such incomplete Bill of Entry cannot be taken as date of presentation of Bill of Entry - Simla Agencies v. CC -<br />1993 (63) ELT 248 (CEGAT).<br />Prior Entry of Bill of Entry - After the goods are unloaded, these have to be cleared within stipulated time -<br />usually three working days. If these are not so removed, demurrage is charged by port trust/airport authorities,<br />which is very high. Hence, importer wants to complete as many formalities as possible before ship arrives.<br />Proviso to Section 46(3) of Customs Act allows importer to present bill of entry upto 30 days before expected<br />date of arrival of vessel. In such case, duty will be payable at the rate applicable on the date on which ‘Entry<br />Inward’ is granted to vessel and not the date of presentation of Bill of Entry, but rate of exchange will be as<br />prevalent on date of submission of bill of entry. - confirmed in CC, New Delhi circular No 64/96 dated<br />10.12.1996 and CBE&C circular No 22/97-Cus dated 4.7.1997.<br />Assessment of Customs duty - Section 17 provides that assessment of goods will be made after Bill of Entry is<br />filed. Date stamp of receipt is put on the ‘Bill of Entry’ and then it is sent to appraising department either<br />manually or electronically<br />There are various Appraising groups for different Chapter headings. Each group is under an Assistant/Deputy<br />Commissioner. Group consists of ‘Examiners’ and ‘Appraisers’.<br />APPRAISING THE GOODS - Appraiser has to (a) correctly classify the goods (b) decide the Value for purpose<br />of Customs duty (c) find out rate of duty applicable as per any exemption notification and (d) verify that goods<br />are not imported in violation of any law. He can call for any further documents that may be required for<br />assessment. If he is of the opinion that goods have to be examined for appraisal, he will issue an examination<br />order, usually on the reverse of Bill of Entry. If such order is issued, the Bill of Entry is presented to appraising<br />staff at docks / air cargo complexes, where the goods are examined in presence of importer’s representative.<br />Assessment is finalised after getting the report of examination. – Chapter 3 Para 11 and 12 of CBE&C’s<br />Customs Manual, 2001.<br />VALUATION OF GOODS - As per rule 10 of Customs Valuation Rules, the importer has to file declaration<br />about full 'value' of goods. If the assessing officer has doubts about the truth and accuracy of 'value' as declared,<br />he can ask importer to submit further information, details and documents. If the doubt persists, the assessing<br />officer can reject the value declared by importer. [rule 10A(1) of Customs Valuation Rules]. If the importer<br />requests, the assessing officer has to give reasons for doubting the value declared by importer. [rule 10A(2)]. If<br />the value declared by importer is rejected, the assessing officer can value imported goods on other basis e.g.<br />value of identical goods, value of similar goods etc. as provided in Customs Valuation Rules. [This amendment<br />has been made w.e.f. 19.2.98, as per WTO agreement. However, it has been held that burden of proof of under<br />valuation is on department]. - - Assessing Officer should not arbitrarily reject the declared value and increase<br />the assessable value. He should follow due process of law and issue appealable order. – MF(DR) circular No.<br />16/2003-Cus dated 17-3-2003.<br />APPROVAL OF ASSESSMENT - The assessment has to be approved by Assistant Commissioner, if the value<br />is more than Rs one lakh. (in cases covered under ‘fast track clearance for imports’, appraiser is also authorised<br />to approve valuation). After the approval, duty payable is typed by a “pin-point typewriter” so that it cannot be<br />tampered with. As per CBE&C circular No. 10/98-Cus dated 11-2-1998, Assessing Officer should sign in full in<br />Bill of Entry followed by his name, preferably by rubber stamp.<br />EDI ASSESSMENT – In the EDI system, the cargo declaration is transferred to assessing officer in the groups<br />electronically. Processing is done on the screen itself. All calculations are done by the system itself. If assessing<br />officer needs clarification, he can raise a query. The query is printed at service centre and importer replies<br />through service centre. Facility of tele-enquiry about status of documents is provided in major customs stations.<br />Under EDI, normally, documents are inspected only after assessment. After assessment, copy of Bill of Entry is<br />printed at service centre. Final Bill of Entry is printed only after ‘Out of Charge’ order is given by customs<br />officer. – Chapter 3 Para 18 to 22 of CBE&C’s Customs Manual, 2001.<br />PAYMENT OF CUSTOMS DUTY - After assessment of duty, necessary duty is paid. Regular importers and<br />Custom House Agents keep current account with Customs department. The duty can be debited to such current<br />account, or it can be paid in cash/DD through TR-6 challan in designated banks.<br />After payment of duty, if goods were already examined, delivery of goods can be taken from custodians (port<br />trust) after paying their dues. If goods were not examined before assessment, these have to be submitted for<br />examination in import shed to the examining staff. After shed appraiser gives ‘out of charge’ order, delivery of<br />goods can be taken from custodian.<br />First and second system of assessment - There are two systems of assessment. Section 17(2) provides for<br />assessment after examination of goods and section 17(4) provides for assessment on basis of documents,<br />followed by inspection and testing of goods.<br />“First appraisement system” or 'first check procedure' is followed if the appraiser is not able to make<br />assessment on the basis of documents submitted and deems that inspection is necessary. Goods are examined<br />first and then these are assessed. This method is followed only if assessment is not possible on basis of<br />documents. - - The importer himself may also request 'first check procedure', if he cannot give all required<br />details regarding description / value of goods. He has to make request for first check examination at the time of<br />filing of Bill of Entry or at data entry stage in case of EDI. He has to give reason for seeking first appraisement.<br />The examination order is recorded on Bill of Entry and then returned to importer / CHA. It is then presented to<br />import shed for examination. The shed appraiser / Dock examiner examines the goods as per examination order<br />and records his findings. If samples are required, they are taken out. In case of EDI system, the report of<br />examination is given in the computer itself. The goods are then assessed to duty by appraiser. - Chapter 3 Para<br />23 of CBE&C’s Customs Manual, 2001.<br />In “Second Appraisement System” or 'second check procedure', which is normally followed, assessment is done<br />on basis of documents and then goods are examined. Such examination is not mandatory. It is done on selective<br />basis on the basis of ‘risk assessment’ or specific intelligence report. Section 17(4) of Customs Act specifically<br />provides that if initially assessment is done on basis of documents, re-assessment can be done after examination<br />or testing of goods or otherwise, if it is found subsequent to examination or testing or otherwise, that any<br />statement made on Bill of Entry or any information supplied is not true in respect of matter relevant to<br />assessment of duty.<br />First appraisement is generally carried out in following cases - * If complete documents are not submitted *<br />Goods are to be tested for correct classification * Goods are re-imported * Goods are damaged or deteriorated<br />and abatement is claimed * Goods are abandoned and remission of duty is applied for * When goods are<br />provisionally assessed * When importer himself requests for examination of goods before payment of duty.<br />EXAMINATION OF GOODS - Examiners carry out physical examination and quantitative checking like<br />weighing, measuring etc. Selected packages are opened and examined on sample basis in ‘Customs<br />Examination Yard’. Examination report is prepared by the examiner.<br />