Submersible Vehicle Advancements Revolutionize Pipeline Inspections
•Download as PPTX, PDF•
0 likes•23 views
Private equity and activist investor, Timothy S. Batchelor is a former shareholder of Subsea Engineering, a company based in Alpharetta, GA. At Subsea Engineering, Timothy S. Batchelor assisted in revolutionizing submersible vehicle technology, which ultimately led to the sale of the company at a 76 times return on investment in 2018. Timothy Batchelor's work has been covered recently both by Subsea World News and Naval Today.
Report
Share
Report
Share
Recommended
Paul brewster presentation
The document discusses developing offshore power stations from technology concepts. It outlines Seapotential's pioneering research, leading device concepts, and development route maps. It also describes test facilities and sites in Ireland that universities and Seapotential have established to test quarter and full-scale wave and tidal energy devices. Seapotential aims to stimulate the supply chain and introduce major subsea engineering businesses to the sector.
Introducing imaging energy may2015 (1)
Imaging Energy is revolutionizing the oil and gas industry by allowing operators to monitor drilling fluids and suspended particles in pipes in real time using specialized industrial medical imaging technology. This provides key data on rheology, flow rate, cuttings, water cut, and salinity that was previously impossible to obtain. The applications range from drilling to production and refining. The technology represents a significant advantage over standard monitoring methods by improving safety, performance, costs and revenues for operators. It also allows remote monitoring of multiple rigs globally. Imaging Energy can provide integrated or standalone rental systems to bring this breakthrough to the oilfield.
Caixa Empreender Award | Cor Power Ocean (BGI)
O Caixa Empreender Award atribuiu um valor de investimento adicional, no valor de 100 mil euros, ao projeto que mais se destacou de um conjunto de 7 startups, previamente selecionadas no âmbito dos programas de aceleração que contam com o apoio do Grupo CGD, BGI, Lisbon Challenge e ACT by COTEC.
A Cor Power Ocean foi uma das startups presentes no Caixa Empreender. #thefuturefromscratch
Mais sobre o objetivo deste evento em: http://bit.ly/1CzA5BV
Designing Sustainable Drainage Systems
This document discusses the need for sustainable drainage systems (SuDS) due to issues with conventional drainage systems like urban flooding. It presents the STREAM Research Project which aims to develop a better decision support system for SuDS design. The project involves Exeter University and Micro Drainage and will work to speed up simulation tasks to provide decision makers with quicker results and trade-off curves for more scenarios and confidence in designs.
March 9, 2011 City Council Workshop
The document summarizes a city council workshop presentation on Oak Harbor's wastewater treatment facilities plan. It provides an overview of the project schedule and evaluation process for identifying preliminary alternatives. Thirteen initial alternatives were developed combining two treatment process options, eight potential plant sites, and three outfall locations. The alternatives were evaluated using a triple bottom line plus analysis considering financial, social, environmental, and technical criteria. Based on this, six alternatives were within 10% cost of the lowest option. Four sites - Windjammer Park, Marina, Old City Shops, and Beachview Farm - were proposed for further evaluation to identify the preferred alternative and site.
Developing a New Decision Support System for SuDS
This document discusses developing a new decision support system (DSS) for sustainable drainage systems (SuDS) design and flood risk management. The objectives are to maximize multiple benefits of SuDS designs, provide a communication platform for various stakeholders, and integrate the new system with existing drainage design software. A prototype optimization framework is presented which uses parameters like SuDS techniques, sizing, and infiltration rates to evaluate objectives like hydraulic performance, water quality, costs, and develop optimal SuDS treatment train designs. Graphical outputs of the framework include flow rate, storage, pollutant concentration, and cost curves to explore trade-offs between designs.
Stepping stones for floating foundations r02
Charlie Nordstrom presentation to the AWEA WINDPOWER Conference in Baltimore September 2015 outlining the best route to market for floating foundations in offshore wind energy deployments
Coasts and Marine Structures- Industry Experts Key Topic Discussion
In this Key topic discussion, we’ve collated the responses from three industry leaders who have provided their opinions and thoughts on the current state of the coasts and marine structures field. Here, they share what they believe are the future and progressive technologies and what they feel are the best practices to their work.
Recommended
Paul brewster presentation
The document discusses developing offshore power stations from technology concepts. It outlines Seapotential's pioneering research, leading device concepts, and development route maps. It also describes test facilities and sites in Ireland that universities and Seapotential have established to test quarter and full-scale wave and tidal energy devices. Seapotential aims to stimulate the supply chain and introduce major subsea engineering businesses to the sector.
Introducing imaging energy may2015 (1)
Imaging Energy is revolutionizing the oil and gas industry by allowing operators to monitor drilling fluids and suspended particles in pipes in real time using specialized industrial medical imaging technology. This provides key data on rheology, flow rate, cuttings, water cut, and salinity that was previously impossible to obtain. The applications range from drilling to production and refining. The technology represents a significant advantage over standard monitoring methods by improving safety, performance, costs and revenues for operators. It also allows remote monitoring of multiple rigs globally. Imaging Energy can provide integrated or standalone rental systems to bring this breakthrough to the oilfield.
Caixa Empreender Award | Cor Power Ocean (BGI)
O Caixa Empreender Award atribuiu um valor de investimento adicional, no valor de 100 mil euros, ao projeto que mais se destacou de um conjunto de 7 startups, previamente selecionadas no âmbito dos programas de aceleração que contam com o apoio do Grupo CGD, BGI, Lisbon Challenge e ACT by COTEC.
A Cor Power Ocean foi uma das startups presentes no Caixa Empreender. #thefuturefromscratch
Mais sobre o objetivo deste evento em: http://bit.ly/1CzA5BV
Designing Sustainable Drainage Systems
This document discusses the need for sustainable drainage systems (SuDS) due to issues with conventional drainage systems like urban flooding. It presents the STREAM Research Project which aims to develop a better decision support system for SuDS design. The project involves Exeter University and Micro Drainage and will work to speed up simulation tasks to provide decision makers with quicker results and trade-off curves for more scenarios and confidence in designs.
March 9, 2011 City Council Workshop
The document summarizes a city council workshop presentation on Oak Harbor's wastewater treatment facilities plan. It provides an overview of the project schedule and evaluation process for identifying preliminary alternatives. Thirteen initial alternatives were developed combining two treatment process options, eight potential plant sites, and three outfall locations. The alternatives were evaluated using a triple bottom line plus analysis considering financial, social, environmental, and technical criteria. Based on this, six alternatives were within 10% cost of the lowest option. Four sites - Windjammer Park, Marina, Old City Shops, and Beachview Farm - were proposed for further evaluation to identify the preferred alternative and site.
Developing a New Decision Support System for SuDS
This document discusses developing a new decision support system (DSS) for sustainable drainage systems (SuDS) design and flood risk management. The objectives are to maximize multiple benefits of SuDS designs, provide a communication platform for various stakeholders, and integrate the new system with existing drainage design software. A prototype optimization framework is presented which uses parameters like SuDS techniques, sizing, and infiltration rates to evaluate objectives like hydraulic performance, water quality, costs, and develop optimal SuDS treatment train designs. Graphical outputs of the framework include flow rate, storage, pollutant concentration, and cost curves to explore trade-offs between designs.
Stepping stones for floating foundations r02
Charlie Nordstrom presentation to the AWEA WINDPOWER Conference in Baltimore September 2015 outlining the best route to market for floating foundations in offshore wind energy deployments
Coasts and Marine Structures- Industry Experts Key Topic Discussion
In this Key topic discussion, we’ve collated the responses from three industry leaders who have provided their opinions and thoughts on the current state of the coasts and marine structures field. Here, they share what they believe are the future and progressive technologies and what they feel are the best practices to their work.
TECHNIQUES OF UNDERWATER STRUCTURE INSPECTION AND WHO TO CONTACT FOR THE JOB
CSU operates in compliance with U.S DOT pipeline and hazardous materials safety administration. We are not just an expert choice for your emergency underwater pipeline inspection need, but a sure safe choice too. Read more here:
Master Portfolio
This document contains details of various mechanical and structural design projects completed by Wayne Holt, including positioning gimbals designed for applications such as airborne internet access, explosive shock environments, ground operations, low-profile broadcasting, and achieving redundancy and accuracy for position feedback. For each project, Holt outlines the situation, obstacles faced, his design solutions and actions taken, and the successful results achieved in meeting requirements. His skills are listed as including CAD, design, analysis, testing, problem solving, and project management.
Vessel Efficiency competition company elevator pitches - London
This document provides information about an "Information Day" event focused on vessel efficiency, including elevator pitches from various organizations. It includes short presentations and contact information from multiple groups researching topics like lightweight ship components, reducing ship energy consumption, developing low carbon shipping technologies, using additive manufacturing for onboard repairs, advanced coatings, condition monitoring systems, marine weather forecasting services, data analysis of vessel performance data, and more. The document aims to facilitate partnerships between these organizations working on improving vessel efficiency.
RESUME NO Healthcare 06 01 15
Alan Hoczko has over 30 years of experience in manufacturing engineering and supervision roles. He has expertise in lean manufacturing processes like Kaizen, reducing costs by over $400k through scrap reduction initiatives. He is proficient in project management, capital planning, and high/low volume metals fabrication and assembly. Hoczko has worked for several companies supporting new product launches, developing manufacturing processes, and implementing quality systems to meet various ISO certifications. He aims to improve production efficiency through techniques like single piece flow, work cells, and predictive maintenance systems.
Project Manager (contract) – Toxic Inhalation Hazardous (TIH) Operations
This project automated and enhanced CPR's existing processes for reporting hazardous material shipments to meet new regulatory requirements. As project manager, the individual focused IT subteams to deliver high quality products on time and on budget. They provided technical expertise that improved the final products and got the over-budget, delayed project back on track. The total budget was $1.2M and their work resulted in a Gold Traction Award from CPR for their contributions to safety and regulatory compliance.
Resume__GARY_SHELTON
Gary Shelton has over 30 years of experience in manufacturing engineering, new product development, and quality engineering. He has a proven track record of implementing strategies to enhance design, productivity and profitability through projects from concept through production. His background includes experience at several major automotive suppliers in roles such as senior manufacturing engineer, senior process engineer, and production engineer.
Gorrell_Gene_Res_Final
Gene M. Gorrell is a senior mechanical engineer with over 20 years of experience in hydraulics, thermoplastic elastomers, and cost reduction. He has expertise in hydraulic systems design, lean manufacturing, and six sigma. At Caterpillar, he led projects that saved $250,000 annually and co-invented a patent. He has experience designing hydraulic components, testing machines, and certifying engines with the EPA. Gorrell holds a B.S. in engineering and certificates in hydraulics systems design, rubber components design, and financial planning.
Olmsted SAME Article
The Olmsted Locks and Dam replacement project on the Ohio River is estimated to cost $3.1 billion and be completed by 2024. The project incorporates lean construction principles and other efficiency measures like an operations center to coordinate work. A production management system called CP2Ms is used with daily meetings to plan work. This system emphasizes accountability, planning and preventing waste. It has led to improvements in safety, quality and productivity at the project.
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...Forum for the Future
SSI workstream - Accelerating the uptake of technology: Demonstrating the business case for new technologies and techniquesResume Leyla Clothier
Leyla Clothier has over 15 years of experience as a process engineer in water treatment, fertilizer production, oil and gas refining. She has expertise in plant design, construction, commissioning, process modeling, engineering reviews, and more. Currently she works as a manager at her own engineering consultancy, ProForte Engineering, providing services to several clients. Previously she has held process engineering roles for Origin Energy and other companies.
Industrial business Proposition for operation synergy
This document discusses empowering ROV assets to work effectively. It summarizes that owning assets alone does not guarantee good operation, and coordinated, strategic moves are required to operate successful missions. It emphasizes providing solutions to extremes through ingenuity, technical willingness, and determination to outcompete rivals. The document outlines providing partners an integrated subsea service framework to put assets to work through building technical and operational support focusing on business outcomes. This allows empowering the future productivity of high-value underwater ROV assets.
Utilipath Company Overview
Utilipath is a design/build solutions company that provides services such as structured cabling, wireless, security, and networking. Their mission is to build the future of communications through industry-leading project execution from the data center to the customer premise. They have experience with large projects for transportation, defense, and telecommunications companies. Notable case studies include the longest directional bore project in North America and a multi-year master contract. The executive team, including the founder Lindon Hayes, has extensive experience in construction, telecommunications, and business management.
Roy Shilling
Roy Shilling has over 37 years of experience in deepwater oil and gas engineering. He has extensive project experience in floating and riser systems design, analysis and fabrication. Currently, he works as a consultant providing engineering support through his company Frontier Deepwater Solutions. Some of his current projects include evaluating wet tree vs. dry tree development options for Anadarko's Shenandoah field and qualifying equipment for Chevron's 20K development.
Innovation and transitions in the oil and gas industry
This slide explains the current innovations and transitions within the oil and gas industry taking uvr robots and shell as use cases for each
Taylor, Michael J Resume
Michael J. Taylor has over 30 years of experience in manufacturing technology, operations management, and environmental compliance. He has held several leadership roles at DuPont where he optimized processes, improved quality and capacity, resolved regulatory issues, and implemented safety and environmental programs. Taylor has a proven record of on-time and under-budget project delivery while ensuring safety and compliance. He is a results-oriented leader with expertise in process optimization, project management, and developing strategies to address complex technical and regulatory challenges.
Resume
Erika Ayers Williams has over 10 years of experience as an engineer in the refined petroleum and natural gas industries. She has a B.S. in Civil & Environmental Engineering from Ohio State University. Her experience includes engineering support roles at Colonial Pipeline Company, Amec Foster Wheeler, and EQT Corporation. At Colonial Pipeline, she managed a tank fire prevention program and established emergency response relationships with first responders.
Benefit from geotube stacking technology & analysis
The document discusses stacking technology developed for Geotube structures. It describes four proprietary software programs developed by TenCate to analyze the safety, stability, and durability of stacked Geotube designs. The software models stresses on the structures, bearing capacity, stability, and layout. TenCate has successfully used stacked Geotube structures for shoreline protection and dewatering projects.
The use of imagery in monitoring existing sub surface structures
Applications and Research in Hydrographic Surveying:
A report examining the use of imagery to monitor sub surface structures.
Produced in fulfilment of MSc Geospatial & Mapping Sciences at the University of Glasgow (2015).
Aqua Ball Project Report
This progress report provides details on the Aqua Ball water transportation device designed by STAJTech. The spherical design allows for improved maneuverability. It has three main parts: a hollow sphere water tank, rubber cap, and handle. A braking system is included using a rotatable braking pad attached to the handle via hinges. This allows two working modes for pushing or pulling the device and engaging the brakes by pulling the handle. Analysis shows the 60L capacity balances user strength with family needs. The braking system works for emergency stopping. With a cost of $27.97, the target retail price of $111.88 surpasses the $100 goal while remaining reasonable. The design is proven feasible through performance and
Biomanufacturing debottlenecking and optimization
This document discusses debottlenecking and process optimization in biomanufacturing. It addresses two major challenges: variability between process times and the complexity of modern biomanufacturing facilities. The document advocates for using discrete event simulation and real-time data from process historians to identify bottlenecks while accounting for variability and complexity. Traditional approaches like only considering resource utilization or relying solely on expert opinions are inadequate for accurate bottleneck identification. Quantitative debottlenecking allows facilities to extend their useful life through flexible retrofits.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
More Related Content
Similar to Submersible Vehicle Advancements Revolutionize Pipeline Inspections
TECHNIQUES OF UNDERWATER STRUCTURE INSPECTION AND WHO TO CONTACT FOR THE JOB
CSU operates in compliance with U.S DOT pipeline and hazardous materials safety administration. We are not just an expert choice for your emergency underwater pipeline inspection need, but a sure safe choice too. Read more here:
Master Portfolio
This document contains details of various mechanical and structural design projects completed by Wayne Holt, including positioning gimbals designed for applications such as airborne internet access, explosive shock environments, ground operations, low-profile broadcasting, and achieving redundancy and accuracy for position feedback. For each project, Holt outlines the situation, obstacles faced, his design solutions and actions taken, and the successful results achieved in meeting requirements. His skills are listed as including CAD, design, analysis, testing, problem solving, and project management.
Vessel Efficiency competition company elevator pitches - London
This document provides information about an "Information Day" event focused on vessel efficiency, including elevator pitches from various organizations. It includes short presentations and contact information from multiple groups researching topics like lightweight ship components, reducing ship energy consumption, developing low carbon shipping technologies, using additive manufacturing for onboard repairs, advanced coatings, condition monitoring systems, marine weather forecasting services, data analysis of vessel performance data, and more. The document aims to facilitate partnerships between these organizations working on improving vessel efficiency.
RESUME NO Healthcare 06 01 15
Alan Hoczko has over 30 years of experience in manufacturing engineering and supervision roles. He has expertise in lean manufacturing processes like Kaizen, reducing costs by over $400k through scrap reduction initiatives. He is proficient in project management, capital planning, and high/low volume metals fabrication and assembly. Hoczko has worked for several companies supporting new product launches, developing manufacturing processes, and implementing quality systems to meet various ISO certifications. He aims to improve production efficiency through techniques like single piece flow, work cells, and predictive maintenance systems.
Project Manager (contract) – Toxic Inhalation Hazardous (TIH) Operations
This project automated and enhanced CPR's existing processes for reporting hazardous material shipments to meet new regulatory requirements. As project manager, the individual focused IT subteams to deliver high quality products on time and on budget. They provided technical expertise that improved the final products and got the over-budget, delayed project back on track. The total budget was $1.2M and their work resulted in a Gold Traction Award from CPR for their contributions to safety and regulatory compliance.
Resume__GARY_SHELTON
Gary Shelton has over 30 years of experience in manufacturing engineering, new product development, and quality engineering. He has a proven track record of implementing strategies to enhance design, productivity and profitability through projects from concept through production. His background includes experience at several major automotive suppliers in roles such as senior manufacturing engineer, senior process engineer, and production engineer.
Gorrell_Gene_Res_Final
Gene M. Gorrell is a senior mechanical engineer with over 20 years of experience in hydraulics, thermoplastic elastomers, and cost reduction. He has expertise in hydraulic systems design, lean manufacturing, and six sigma. At Caterpillar, he led projects that saved $250,000 annually and co-invented a patent. He has experience designing hydraulic components, testing machines, and certifying engines with the EPA. Gorrell holds a B.S. in engineering and certificates in hydraulics systems design, rubber components design, and financial planning.
Olmsted SAME Article
The Olmsted Locks and Dam replacement project on the Ohio River is estimated to cost $3.1 billion and be completed by 2024. The project incorporates lean construction principles and other efficiency measures like an operations center to coordinate work. A production management system called CP2Ms is used with daily meetings to plan work. This system emphasizes accountability, planning and preventing waste. It has led to improvements in safety, quality and productivity at the project.
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...Forum for the Future
SSI workstream - Accelerating the uptake of technology: Demonstrating the business case for new technologies and techniquesResume Leyla Clothier
Leyla Clothier has over 15 years of experience as a process engineer in water treatment, fertilizer production, oil and gas refining. She has expertise in plant design, construction, commissioning, process modeling, engineering reviews, and more. Currently she works as a manager at her own engineering consultancy, ProForte Engineering, providing services to several clients. Previously she has held process engineering roles for Origin Energy and other companies.
Industrial business Proposition for operation synergy
This document discusses empowering ROV assets to work effectively. It summarizes that owning assets alone does not guarantee good operation, and coordinated, strategic moves are required to operate successful missions. It emphasizes providing solutions to extremes through ingenuity, technical willingness, and determination to outcompete rivals. The document outlines providing partners an integrated subsea service framework to put assets to work through building technical and operational support focusing on business outcomes. This allows empowering the future productivity of high-value underwater ROV assets.
Utilipath Company Overview
Utilipath is a design/build solutions company that provides services such as structured cabling, wireless, security, and networking. Their mission is to build the future of communications through industry-leading project execution from the data center to the customer premise. They have experience with large projects for transportation, defense, and telecommunications companies. Notable case studies include the longest directional bore project in North America and a multi-year master contract. The executive team, including the founder Lindon Hayes, has extensive experience in construction, telecommunications, and business management.
Roy Shilling
Roy Shilling has over 37 years of experience in deepwater oil and gas engineering. He has extensive project experience in floating and riser systems design, analysis and fabrication. Currently, he works as a consultant providing engineering support through his company Frontier Deepwater Solutions. Some of his current projects include evaluating wet tree vs. dry tree development options for Anadarko's Shenandoah field and qualifying equipment for Chevron's 20K development.
Innovation and transitions in the oil and gas industry
This slide explains the current innovations and transitions within the oil and gas industry taking uvr robots and shell as use cases for each
Taylor, Michael J Resume
Michael J. Taylor has over 30 years of experience in manufacturing technology, operations management, and environmental compliance. He has held several leadership roles at DuPont where he optimized processes, improved quality and capacity, resolved regulatory issues, and implemented safety and environmental programs. Taylor has a proven record of on-time and under-budget project delivery while ensuring safety and compliance. He is a results-oriented leader with expertise in process optimization, project management, and developing strategies to address complex technical and regulatory challenges.
Resume
Erika Ayers Williams has over 10 years of experience as an engineer in the refined petroleum and natural gas industries. She has a B.S. in Civil & Environmental Engineering from Ohio State University. Her experience includes engineering support roles at Colonial Pipeline Company, Amec Foster Wheeler, and EQT Corporation. At Colonial Pipeline, she managed a tank fire prevention program and established emergency response relationships with first responders.
Benefit from geotube stacking technology & analysis
The document discusses stacking technology developed for Geotube structures. It describes four proprietary software programs developed by TenCate to analyze the safety, stability, and durability of stacked Geotube designs. The software models stresses on the structures, bearing capacity, stability, and layout. TenCate has successfully used stacked Geotube structures for shoreline protection and dewatering projects.
The use of imagery in monitoring existing sub surface structures
Applications and Research in Hydrographic Surveying:
A report examining the use of imagery to monitor sub surface structures.
Produced in fulfilment of MSc Geospatial & Mapping Sciences at the University of Glasgow (2015).
Aqua Ball Project Report
This progress report provides details on the Aqua Ball water transportation device designed by STAJTech. The spherical design allows for improved maneuverability. It has three main parts: a hollow sphere water tank, rubber cap, and handle. A braking system is included using a rotatable braking pad attached to the handle via hinges. This allows two working modes for pushing or pulling the device and engaging the brakes by pulling the handle. Analysis shows the 60L capacity balances user strength with family needs. The braking system works for emergency stopping. With a cost of $27.97, the target retail price of $111.88 surpasses the $100 goal while remaining reasonable. The design is proven feasible through performance and
Biomanufacturing debottlenecking and optimization
This document discusses debottlenecking and process optimization in biomanufacturing. It addresses two major challenges: variability between process times and the complexity of modern biomanufacturing facilities. The document advocates for using discrete event simulation and real-time data from process historians to identify bottlenecks while accounting for variability and complexity. Traditional approaches like only considering resource utilization or relying solely on expert opinions are inadequate for accurate bottleneck identification. Quantitative debottlenecking allows facilities to extend their useful life through flexible retrofits.
Similar to Submersible Vehicle Advancements Revolutionize Pipeline Inspections (20)
TECHNIQUES OF UNDERWATER STRUCTURE INSPECTION AND WHO TO CONTACT FOR THE JOB
TECHNIQUES OF UNDERWATER STRUCTURE INSPECTION AND WHO TO CONTACT FOR THE JOB
Vessel Efficiency competition company elevator pitches - London
Vessel Efficiency competition company elevator pitches - London
Project Manager (contract) – Toxic Inhalation Hazardous (TIH) Operations
Project Manager (contract) – Toxic Inhalation Hazardous (TIH) Operations
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...
SSI workstream - Accelerating the uptake of technology: Demonstrating the bus...
Industrial business Proposition for operation synergy
Industrial business Proposition for operation synergy
Innovation and transitions in the oil and gas industry
Innovation and transitions in the oil and gas industry
Benefit from geotube stacking technology & analysis
Benefit from geotube stacking technology & analysis
The use of imagery in monitoring existing sub surface structures
The use of imagery in monitoring existing sub surface structures
Recently uploaded
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
AI-Based Home Security System : Home security
Home security is of paramount importance in today's world, where we rely more on technology, home
security is crucial. Using technology to make homes safer and easier to control from anywhere is
important. Home security is important for the occupant’s safety. In this paper, we came up with a low cost,
AI based model home security system. The system has a user-friendly interface, allowing users to start
model training and face detection with simple keyboard commands. Our goal is to introduce an innovative
home security system using facial recognition technology. Unlike traditional systems, this system trains
and saves images of friends and family members. The system scans this folder to recognize familiar faces
and provides real-time monitoring. If an unfamiliar face is detected, it promptly sends an email alert,
ensuring a proactive response to potential security threats.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
Submersible Vehicle Advancements Revolutionize Pipeline Inspections
- 2. Introduction • Private equity and activist investor, Timothy S. Batchelor is a former shareholder of Subsea Engineering, a company based in Alpharetta, GA. At Subsea Engineering, Timothy S. Batchelor assisted in revolutionizing submersible vehicle technology, which ultimately led to the sale of the company at a 76 times return on investment in 2018. Timothy Batchelor's work has been covered recently both by Subsea World News and Naval Today. A recent technological revolution has brought new submersible vehicle capabilities to the routine maintenance of inspecting pipeline connection systems. The latest advancements center on the use of still imagery and high-resolution spatial video through remotely operated vehicles (ROVs). Remotely operated vehicles can switch between taking video and images swiftly and with minimal adjustments, which saves time and reduces costs. Also, due to their increased overall efficiency, ROVs minimize environmental impact and personnel safety risks by requiring fewer vessel days to complete pipeline inspections. Unlike pipeline inspections carried out using acoustic survey campaigns, the data recorded by ROVs leaves less room for interpretation.