Steel Deck Powered by Alex Form
•
0 likes•178 views
Alex Form manufactures structural and architectural deck products and systems . Deck profiles are available in a variety of finishes and can be used in a wide range of applications requiring roofing ; flooring ; ceiling and cladding solutions Deck Products meet required steel deck certificates and are manufactured in accordance with the specifications of steel deck institute Our unique features : uses high tensile steel - high corrosion resistant coating - structurally designed for maximum strength and durability - positive interlocking design - easily installed - unparalleled strength and durability due to the design - can be used in both concrete and steel structures frames - cost saving and quickly installed
Report
Share
Report
Share
Download to read offline
Recommended
Valves pipe fittings
The document provides specifications for various pipe fittings and flanges including malleable fittings, black and galvanized steel fittings, unions, and stainless steel fittings. It includes information on materials, dimensions, threading, finishes, pressure ratings and stock ranges for items like elbows, tees, caps and flanges. Standard carbon steel flanges are covered along with temperature and pressure ratings for carbon and alloy steel flanges per Australian standards.
Peb
Pre-engineered buildings are factory-built structures consisting of prefabricated components that are assembled on-site. The components are designed and manufactured based on a client's requirements and structural calculations. This allows the building to be lighter and less expensive than traditional on-site construction, with components delivered and assembled more quickly.
Steel building detail
1. The document discusses the building system for a plane frame structure. It uses steel H-shapes for columns, beams, bracing, and tie beams arranged in a rigid frame to transfer loads from the roof and floors to the foundation.
2. For multi-floor structures, the frames can be pure rigid, use rigid horizontal connections with hinged verticals plus bracing, or use hinged joints for both with bracing in both directions. Column and beam shapes include H-shapes, boxes, crosses, and pipes.
3. Bracing includes both flexible rod steel and stiffer section steel. It is used to provide rigidity and transfer horizontal forces. Details are provided for nodes, bracing,
Wood Framing F 09
The document discusses light wood frame construction methods used for floors, walls, and roofs. It describes common framing materials like wood studs, joists, and sheathing. Balloon framing and platform framing methods are explained. Key terms related to light wood frame construction are also defined.
Peb
This document provides information on pre-engineered buildings (PEBs) including their design, applications, advantages over conventional buildings, major components, and an overview of Richa Industries, a leading PEB manufacturer. PEBs are designed and fabricated off-site then assembled on-site, making construction faster than conventional buildings. They can be used for warehouses, factories, offices and more. Advantages include quicker construction, quality control, architectural flexibility, durability and lower lifetime costs. Richa Industries provides PEBs across India and has experience with tall, large span, and multistory PEB projects for various clients.
Drywall tips
Este documento explica el sistema constructivo Drywall o sistema de construcción en seco. Se describe brevemente la historia del Drywall, cómo surgió en 1916 en Estados Unidos y cómo se expandió por el mundo. Luego explica detalladamente el proceso paso a paso para construir una pared simple con el sistema Drywall y cómo instalar un cielo raso.
03-working details-ceiling-by Prof Dr. Ehab Ezzat 2018
The document provides specifications for ceiling installation including hangers, clips, connectors, profiles and accessories. It lists various ceiling profile options ranging from 16 to 24 inches. Fixings include screws and expandable metal plugs for reinforced concrete roofs. Suspension wires should be within 6 inches of light fixtures. Profiles include CD 60x27, UA50x40, and connectors are provided for interchangeability. Accessories include angles, frames and universal connectors for ceiling profiles.
Pipe Support Engineering & Design - June
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most. We look forward to having you join us for this complimentary presentation on Engineering and Design of Pipe Supports.
Recommended
Valves pipe fittings
The document provides specifications for various pipe fittings and flanges including malleable fittings, black and galvanized steel fittings, unions, and stainless steel fittings. It includes information on materials, dimensions, threading, finishes, pressure ratings and stock ranges for items like elbows, tees, caps and flanges. Standard carbon steel flanges are covered along with temperature and pressure ratings for carbon and alloy steel flanges per Australian standards.
Peb
Pre-engineered buildings are factory-built structures consisting of prefabricated components that are assembled on-site. The components are designed and manufactured based on a client's requirements and structural calculations. This allows the building to be lighter and less expensive than traditional on-site construction, with components delivered and assembled more quickly.
Steel building detail
1. The document discusses the building system for a plane frame structure. It uses steel H-shapes for columns, beams, bracing, and tie beams arranged in a rigid frame to transfer loads from the roof and floors to the foundation.
2. For multi-floor structures, the frames can be pure rigid, use rigid horizontal connections with hinged verticals plus bracing, or use hinged joints for both with bracing in both directions. Column and beam shapes include H-shapes, boxes, crosses, and pipes.
3. Bracing includes both flexible rod steel and stiffer section steel. It is used to provide rigidity and transfer horizontal forces. Details are provided for nodes, bracing,
Wood Framing F 09
The document discusses light wood frame construction methods used for floors, walls, and roofs. It describes common framing materials like wood studs, joists, and sheathing. Balloon framing and platform framing methods are explained. Key terms related to light wood frame construction are also defined.
Peb
This document provides information on pre-engineered buildings (PEBs) including their design, applications, advantages over conventional buildings, major components, and an overview of Richa Industries, a leading PEB manufacturer. PEBs are designed and fabricated off-site then assembled on-site, making construction faster than conventional buildings. They can be used for warehouses, factories, offices and more. Advantages include quicker construction, quality control, architectural flexibility, durability and lower lifetime costs. Richa Industries provides PEBs across India and has experience with tall, large span, and multistory PEB projects for various clients.
Drywall tips
Este documento explica el sistema constructivo Drywall o sistema de construcción en seco. Se describe brevemente la historia del Drywall, cómo surgió en 1916 en Estados Unidos y cómo se expandió por el mundo. Luego explica detalladamente el proceso paso a paso para construir una pared simple con el sistema Drywall y cómo instalar un cielo raso.
03-working details-ceiling-by Prof Dr. Ehab Ezzat 2018
The document provides specifications for ceiling installation including hangers, clips, connectors, profiles and accessories. It lists various ceiling profile options ranging from 16 to 24 inches. Fixings include screws and expandable metal plugs for reinforced concrete roofs. Suspension wires should be within 6 inches of light fixtures. Profiles include CD 60x27, UA50x40, and connectors are provided for interchangeability. Accessories include angles, frames and universal connectors for ceiling profiles.
Pipe Support Engineering & Design - June
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most. We look forward to having you join us for this complimentary presentation on Engineering and Design of Pipe Supports.
BUILDING TECH 5_06.pptx
This document provides information about alternative building construction systems, specifically cable structures and membrane structures. It defines cables and their uses in tension structures like suspension bridges and cable-stayed bridges. Membrane structures are described as thin, flexible sheets that can be used to construct pneumatic structures, tensile membrane structures, and cable domes. Examples are given of large-scale cable and membrane structures along with discussions of their materials, advantages, and disadvantages.
Building Technology I
This document provides details on a group project to design a 3-storey apartment block using Industrialized Building System (IBS). It includes an introduction to IBS in Malaysia, the main IBS systems used, and details on the precast concrete system being implemented. Precast components discussed include hollow core panels, slabs, beams, columns, stairs, and toilet pods. The manufacturing process for these precast elements is also summarized.
Elementos cocina
Este documento proporciona información sobre varios productos organizadores para cocinas, baños y clósets. Incluye detalles sobre un burro de planchar para montar en la pared, sistemas de mesas extraíbles, herrajes para gabinetes de esquina y entrepaños giratorios. También presenta accesorios como ganchos, lámparas y soportes para mejorar la organización en el hogar.
Prefab company profile nw
Prefab Engineers offers turn-key solutions for PEB'' s by offering a comprehensive service package including design, manufacture, supply and installation of PEB'' s. Its diverse product line includes per-fabricated canopies, standing seam roofing systems, and miscellaneous steel building components as C- and Z- purlins in a range of commonly used sizes.
Inspection manual for piping
This document provides an overview of piping materials and selection guidelines. It defines key piping terms like pipe and tubing. It describes various types of pipes based on the manufacturing method, such as electric resistance welded pipe, furnace butt welded pipe, seamless pipes, and more. The document outlines factors to consider for material selection like design life, temperature, pressure, corrosion allowance, service conditions, and economics. It provides specific guidelines for material selection for high temperature exposures above 232°C and ambient/intermediate temperatures from 0°C to 232°C. The focus is on selecting materials that will be resistant to various deterioration modes over the design life of the piping system.
Branch connections
In 1943 when Bonney Forge pioneered
the “Shape of Reinforcement” for branch connections, who would have thought it would fast become a
recog- nized industry standard. Today, Bon- ney Forge Branch Connections offer complete run pipe
reinforcement while avoiding cracks, fillet welds, and sharp re-entrant corner reinforcement taper-
ing at the sides, thus preventing abrupt changes in thickness where the fitting
joins the header pipe.
Pipe shields for beginners
This presentation will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over its 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This presentation will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!
Slip on flange welding according TO asme b31.3
This document discusses slip-on flange welding according to ASME B31.3-2016 standards. It explains that slip-on flange welding uses an equal fillet weld and the weld size is measured by the leg length using a welding gauge. It provides equations for calculating the fillet weld size on both the flange face side and hub end side based on the pipe wall thickness and hub thickness. A practical example is given to demonstrate calculating the weld sizes for a sample stainless steel flange.
2.2 RC components.pdf
This document discusses various reinforced concrete components used in construction including beams, columns, floor slabs, and roofs. It provides details on their functions, typical shapes, construction considerations, and examples. Beams are horizontal members that transfer loads to columns and can be continuous, T-shaped, or L-shaped when cast with floor slabs. Columns are vertical members that support beams and floors and can be various cross-sections. Floor slabs divide levels and support loads through different systems like one-way spanning, two-way flat plates, or ribbed floors. Roofs provide weather protection and strength to sustain loads.
Piling Mandrels for the Installation of Plastic Sheet Piling
Piling Mandrels for the Installation of Plastic Sheet PilingThe Hammerman Equipment Plastic Piling Co. Ltd
A brief presentation on the available piling mandrels for installing plastic piling, as available from THE Plastic Piling CompanyCross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses.
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses. SBCBreakfastSessions
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses. Principal PhD, PEng, PE, LEED® AP Moses Structural Engineers Inc.Composite Concrete-Steel Construction in Tall Buildings by Dr. Naveed
The document discusses composite concrete-steel construction systems used in tall buildings. It describes how composite and mixed systems use concrete and steel acting together to provide benefits like increased strength and stiffness. Common composite elements discussed include composite floors, beams, columns, shear walls, and link beams. Composite columns provide benefits like increased strength and stiffness. Concrete-filled steel tubes are an efficient composite column type. Recent developments in composite shear walls include concrete-filled composite plate shear wall systems that offer enhanced seismic performance. Case studies of composite tall buildings in Asia are also presented.
Piping Components Handbook (Piping Training Material) for Oil & Gas Engineer
Learn in detail every aspect of Pipe & Pipe Fittings used in process industry
•Different types of Pipe, Pipe fittings (Elbow, Tee, reducers, Caps etc.), Flanges, Gaskets, Branch Connection, Bolting materials
•Materials (Metal-Carbon Steel, Stainless Steel, Alloy Steel etc. Non-Metal- PVC/VCM, HDPE, GRE-GRP etc.)
•Manufacturing methods
•Heat treatment requirements
•Inspection and Testing requirements (Non Destructive Testing, Mechanical & Chemical testing)
•Dimensions & Markings requirements
•Code & Standard used in piping
G&W High Voltage Cable Accessories - Joints & Terminations
This document provides information about G&W Electric's cable accessories, including:
1. G&W Electric manufactures cable accessories such as terminations and joints rated from 69kV to 230kV for extruded dielectric cable systems.
2. The accessories are factory molded and tested, and installation options include mechanical shrink or slip on methods.
3. G&W Electric has certification for its products and testing facilities to ensure product quality and reliability.
BUILDING TECH 5.pptx
This document provides information about an architecture course on alternative building construction systems. It includes the course name, description, units, contact hours, prerequisites, objectives, and outline. The course aims to teach students about non-conventional construction methods through lectures, studio time, and sample drawings. It covers alternative systems like cast-in-place concrete, precast concrete, prestressed concrete, composite construction, tensile structures, shell structures, and pre-engineered buildings.
Itt grinnell pipe hanger design & engineering 2008
We are ITT GRINNELL leading manufacturers of Piping, valves and Pipe supports.
For any inquires in GCC area mail us at: info.me@ittgrinnell.com
Asme pipe fiting
The document discusses several ASME/ANSI B16 standards that cover pipes, fittings, flanges, valves, and other components used in various piping systems. It provides brief summaries of each standard, outlining what types of components they apply to as well as what requirements they specify regarding pressure ratings, materials, dimensions, markings and other attributes. In total, over 20 different ASME standards are referenced that establish specifications and requirements for a wide range of piping system components.
Constant Spring Supports Webinar
This document provides an overview of a webinar presented by Piping Technology & Products, Inc. and its subsidiaries on constant spring supports. It discusses the characteristics and design of constant spring supports, including various types and configurations. It also covers related topics like installation, testing, maintenance, and value-added engineering services.
BARRA-E-PAG-11
Kinedyne ofrece varias barras de aluminio y acero para doble piso y retención, incluyendo barras estándar de la Serie E o A, barras de aluminio para trabajo pesado, y barras de acero. Las barras están diseñadas para usarse con rieles logísticos Kinedyne y pueden soportar cargas verticales de hasta 3,000 libras y cargas horizontales de hasta 2,500 libras, dependiendo del modelo.
oil gas engineering-41-phpapp02
This document provides an overview of an oil and gas engineering training program. It covers topics like project engineering, design basis, engineering disciplines, process design, equipment, piping and instrumentation, civil works, and health and safety. The training aims to give participants a detailed understanding of the engineering activities in various disciplines and show sample deliverables. It also explains the challenges of oil and gas engineering projects. The document contains several figures to illustrate engineering workflows, project organization, and more.
Cold storage insulated panels
Our Cold Store insulated panels with the latest German Technology in this industry to service all Cold Store applications ( freeze & Frozen Cold Store rooms ) in Egypt and Middle East - As for our panel products certificate ( To be the only factory in the Middle East Certified as FM Approval ) with fire resistance ; user safety and heat isolation to our panels and to be among the rare top world manufacturers for the sandwich panels with this certificate
Alex panel Powered by Alexandria Steel Forming ( Alex Form )
our sandwich panel products considered in prefabricated buildings ; Construction Structures of industrial ; commercial & administrative buildings ; Live Stock & Poultry Houses for Agriculture sector ; with the latest German Technology in this industry ; the only production line in the Middle East with its latest technology - • As for our panel products certificate ( To be the only factory in the Middle East Certified as FM Approval ) with fire resistance ; user safety and heat isolation to our panels and to be among the rare top world manufacturers for the sandwich panels with this certificate
More Related Content
What's hot
BUILDING TECH 5_06.pptx
This document provides information about alternative building construction systems, specifically cable structures and membrane structures. It defines cables and their uses in tension structures like suspension bridges and cable-stayed bridges. Membrane structures are described as thin, flexible sheets that can be used to construct pneumatic structures, tensile membrane structures, and cable domes. Examples are given of large-scale cable and membrane structures along with discussions of their materials, advantages, and disadvantages.
Building Technology I
This document provides details on a group project to design a 3-storey apartment block using Industrialized Building System (IBS). It includes an introduction to IBS in Malaysia, the main IBS systems used, and details on the precast concrete system being implemented. Precast components discussed include hollow core panels, slabs, beams, columns, stairs, and toilet pods. The manufacturing process for these precast elements is also summarized.
Elementos cocina
Este documento proporciona información sobre varios productos organizadores para cocinas, baños y clósets. Incluye detalles sobre un burro de planchar para montar en la pared, sistemas de mesas extraíbles, herrajes para gabinetes de esquina y entrepaños giratorios. También presenta accesorios como ganchos, lámparas y soportes para mejorar la organización en el hogar.
Prefab company profile nw
Prefab Engineers offers turn-key solutions for PEB'' s by offering a comprehensive service package including design, manufacture, supply and installation of PEB'' s. Its diverse product line includes per-fabricated canopies, standing seam roofing systems, and miscellaneous steel building components as C- and Z- purlins in a range of commonly used sizes.
Inspection manual for piping
This document provides an overview of piping materials and selection guidelines. It defines key piping terms like pipe and tubing. It describes various types of pipes based on the manufacturing method, such as electric resistance welded pipe, furnace butt welded pipe, seamless pipes, and more. The document outlines factors to consider for material selection like design life, temperature, pressure, corrosion allowance, service conditions, and economics. It provides specific guidelines for material selection for high temperature exposures above 232°C and ambient/intermediate temperatures from 0°C to 232°C. The focus is on selecting materials that will be resistant to various deterioration modes over the design life of the piping system.
Branch connections
In 1943 when Bonney Forge pioneered
the “Shape of Reinforcement” for branch connections, who would have thought it would fast become a
recog- nized industry standard. Today, Bon- ney Forge Branch Connections offer complete run pipe
reinforcement while avoiding cracks, fillet welds, and sharp re-entrant corner reinforcement taper-
ing at the sides, thus preventing abrupt changes in thickness where the fitting
joins the header pipe.
Pipe shields for beginners
This presentation will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over its 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This presentation will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!
Slip on flange welding according TO asme b31.3
This document discusses slip-on flange welding according to ASME B31.3-2016 standards. It explains that slip-on flange welding uses an equal fillet weld and the weld size is measured by the leg length using a welding gauge. It provides equations for calculating the fillet weld size on both the flange face side and hub end side based on the pipe wall thickness and hub thickness. A practical example is given to demonstrate calculating the weld sizes for a sample stainless steel flange.
2.2 RC components.pdf
This document discusses various reinforced concrete components used in construction including beams, columns, floor slabs, and roofs. It provides details on their functions, typical shapes, construction considerations, and examples. Beams are horizontal members that transfer loads to columns and can be continuous, T-shaped, or L-shaped when cast with floor slabs. Columns are vertical members that support beams and floors and can be various cross-sections. Floor slabs divide levels and support loads through different systems like one-way spanning, two-way flat plates, or ribbed floors. Roofs provide weather protection and strength to sustain loads.
Piling Mandrels for the Installation of Plastic Sheet Piling
Piling Mandrels for the Installation of Plastic Sheet PilingThe Hammerman Equipment Plastic Piling Co. Ltd
A brief presentation on the available piling mandrels for installing plastic piling, as available from THE Plastic Piling CompanyCross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses.
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses. SBCBreakfastSessions
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses. Principal PhD, PEng, PE, LEED® AP Moses Structural Engineers Inc.Composite Concrete-Steel Construction in Tall Buildings by Dr. Naveed
The document discusses composite concrete-steel construction systems used in tall buildings. It describes how composite and mixed systems use concrete and steel acting together to provide benefits like increased strength and stiffness. Common composite elements discussed include composite floors, beams, columns, shear walls, and link beams. Composite columns provide benefits like increased strength and stiffness. Concrete-filled steel tubes are an efficient composite column type. Recent developments in composite shear walls include concrete-filled composite plate shear wall systems that offer enhanced seismic performance. Case studies of composite tall buildings in Asia are also presented.
Piping Components Handbook (Piping Training Material) for Oil & Gas Engineer
Learn in detail every aspect of Pipe & Pipe Fittings used in process industry
•Different types of Pipe, Pipe fittings (Elbow, Tee, reducers, Caps etc.), Flanges, Gaskets, Branch Connection, Bolting materials
•Materials (Metal-Carbon Steel, Stainless Steel, Alloy Steel etc. Non-Metal- PVC/VCM, HDPE, GRE-GRP etc.)
•Manufacturing methods
•Heat treatment requirements
•Inspection and Testing requirements (Non Destructive Testing, Mechanical & Chemical testing)
•Dimensions & Markings requirements
•Code & Standard used in piping
G&W High Voltage Cable Accessories - Joints & Terminations
This document provides information about G&W Electric's cable accessories, including:
1. G&W Electric manufactures cable accessories such as terminations and joints rated from 69kV to 230kV for extruded dielectric cable systems.
2. The accessories are factory molded and tested, and installation options include mechanical shrink or slip on methods.
3. G&W Electric has certification for its products and testing facilities to ensure product quality and reliability.
BUILDING TECH 5.pptx
This document provides information about an architecture course on alternative building construction systems. It includes the course name, description, units, contact hours, prerequisites, objectives, and outline. The course aims to teach students about non-conventional construction methods through lectures, studio time, and sample drawings. It covers alternative systems like cast-in-place concrete, precast concrete, prestressed concrete, composite construction, tensile structures, shell structures, and pre-engineered buildings.
Itt grinnell pipe hanger design & engineering 2008
We are ITT GRINNELL leading manufacturers of Piping, valves and Pipe supports.
For any inquires in GCC area mail us at: info.me@ittgrinnell.com
Asme pipe fiting
The document discusses several ASME/ANSI B16 standards that cover pipes, fittings, flanges, valves, and other components used in various piping systems. It provides brief summaries of each standard, outlining what types of components they apply to as well as what requirements they specify regarding pressure ratings, materials, dimensions, markings and other attributes. In total, over 20 different ASME standards are referenced that establish specifications and requirements for a wide range of piping system components.
Constant Spring Supports Webinar
This document provides an overview of a webinar presented by Piping Technology & Products, Inc. and its subsidiaries on constant spring supports. It discusses the characteristics and design of constant spring supports, including various types and configurations. It also covers related topics like installation, testing, maintenance, and value-added engineering services.
BARRA-E-PAG-11
Kinedyne ofrece varias barras de aluminio y acero para doble piso y retención, incluyendo barras estándar de la Serie E o A, barras de aluminio para trabajo pesado, y barras de acero. Las barras están diseñadas para usarse con rieles logísticos Kinedyne y pueden soportar cargas verticales de hasta 3,000 libras y cargas horizontales de hasta 2,500 libras, dependiendo del modelo.
oil gas engineering-41-phpapp02
This document provides an overview of an oil and gas engineering training program. It covers topics like project engineering, design basis, engineering disciplines, process design, equipment, piping and instrumentation, civil works, and health and safety. The training aims to give participants a detailed understanding of the engineering activities in various disciplines and show sample deliverables. It also explains the challenges of oil and gas engineering projects. The document contains several figures to illustrate engineering workflows, project organization, and more.
What's hot (20)
Piling Mandrels for the Installation of Plastic Sheet Piling
Piling Mandrels for the Installation of Plastic Sheet Piling
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses.
Cross-Laminated Timber: Revolutionizing Wood Use in Construction - David Moses.
Composite Concrete-Steel Construction in Tall Buildings by Dr. Naveed
Composite Concrete-Steel Construction in Tall Buildings by Dr. Naveed
Piping Components Handbook (Piping Training Material) for Oil & Gas Engineer
Piping Components Handbook (Piping Training Material) for Oil & Gas Engineer
G&W High Voltage Cable Accessories - Joints & Terminations
G&W High Voltage Cable Accessories - Joints & Terminations
Itt grinnell pipe hanger design & engineering 2008
Itt grinnell pipe hanger design & engineering 2008
More from Mohamed Abdel Kader
Cold storage insulated panels
Our Cold Store insulated panels with the latest German Technology in this industry to service all Cold Store applications ( freeze & Frozen Cold Store rooms ) in Egypt and Middle East - As for our panel products certificate ( To be the only factory in the Middle East Certified as FM Approval ) with fire resistance ; user safety and heat isolation to our panels and to be among the rare top world manufacturers for the sandwich panels with this certificate
Alex panel Powered by Alexandria Steel Forming ( Alex Form )
our sandwich panel products considered in prefabricated buildings ; Construction Structures of industrial ; commercial & administrative buildings ; Live Stock & Poultry Houses for Agriculture sector ; with the latest German Technology in this industry ; the only production line in the Middle East with its latest technology - • As for our panel products certificate ( To be the only factory in the Middle East Certified as FM Approval ) with fire resistance ; user safety and heat isolation to our panels and to be among the rare top world manufacturers for the sandwich panels with this certificate
Alex form ( Alexandria Steel Forming ) Business Presentation Profile
Alexandria Steel Forming ( Alex Form ) with its mature experience with its Business Core Competence " Construction ; Storage and Insulation " As a steel service center unique supplier component for steel structure & prefabricated buildings ( Construction & Building materials ) in Egypt and Middle East -• Manufacturing all metal sectors according to customer request for industrial purposes - • Production of many cold rolled steel sections in different steel grades according to Egyptian standards as well as according to international specifications for export purposes- • Manufacture and supply of corrugated sheets for the covering works of metal installations and all industrial purposes- • Manufacture and supply of conveyors and fittings (Z, C, U, Purlin), angles for industrial purposes as well as structural steel structure as well as sigma sector
Kindly you can watch our industrial business factories scale : https://drive.google.com/file/d/1thBRCujm2IBAyC6dXFxmNiGn3VvmkfKs/view?usp=sharing
Mohamed abdel kader 2015
Mohamed Abdel-Kader Ibrahim is seeking a position in facility engineering management or asset maintenance management. He has a Bachelor's degree in electronics and communication engineering from Arab Academy for Science and Technology. His work experience includes positions as a maintenance planning engineer at Alex Fertilizers Company and as a facility maintenance supervisor and quality observer engineer at Arab Academy for Science and Technology and Maritime Transport. He has additional training in project management, accounting, marketing and other business subjects.
More from Mohamed Abdel Kader (7)
Alex panel Powered by Alexandria Steel Forming ( Alex Form )
Alex panel Powered by Alexandria Steel Forming ( Alex Form )
Alex form ( Alexandria Steel Forming ) Business Presentation Profile
Alex form ( Alexandria Steel Forming ) Business Presentation Profile
Volunteer organization work - IEEE AAST Student branch
Volunteer organization work - IEEE AAST Student branch
Recently uploaded
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSDpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence