Standard 41 is a New York based furniture design and fabricator. We specialize in custom pieces, working with the clients to assure that each piece is exactly what is needed; aesthetically and functionally.

1. six generations have come down to this.

2. Train to Dijon

3. Train to Dijon
Train to Dijon was born from boredom with the ubiquitous
Solid walnut, maple, cherry , Beech,
90-degree angle. The table, bench and chairs are tilted
96lx32dx28h
at a 12-degree angle – enough to be noticeable without
compromising structural integrity. The collection is crafted
Bleach, water based top coat
from European Beech that is bleached to emphasize the
playfulness of the shadows. The hand painted yellow reveal
underneath the top was inspired by blurred landscapes,
subtle pops of color, and gleaming lights when looking out a
train window. Train to Dijon references the classic farm table,
but with a modern slant.

5. Cross Roads Table
Cross Roads Table is a minimal table that breaks the symmetry of a Stainless Steel
traditional table. The hint of color, alternating between in and out, gives a
whimsical slant. Glass
Pigmented Lacquer
92lx34dx29h

6. Bouncing Ball Table
Bouncing Ball is dining table inspired by two boys bouncing a Stainless Steel
red rubber ball between the two of them. The compounded
angle creates a minimal but sturdy base. Glass
Pigmented Lacquer
92lx34dx29h

7. Il Palio

8. Il Palio
Il Palio is a solid Walnut table, with an oil finish, and Solid walnut, maple, cherry
is a nod to Andrew’s father’s trademark of pairing 34”wx28h
an organic table top with a geometric base. Named
after a square in Siena that hosts a biannual horse 3 part oil finish
race, the table is essentially two intersecting squares
bisected with a circular top: A round race in a square.

9. All Y’alls

10. All Y’alls
All Y’alls is the result of a conversation with Dallas Available in:
interior designers who wanted bigger tables with more Solid walnut, maple, cherry
bling. Rising to the challenge while staying true to his Gold plated corners
minimalist roots, Andrew designed a table that melds 84lx32dx28h
modernism with Texas flare. The 24k gold corners rift on 3 part oil finish
the idea of pre-fab, knock down furniture.

11. Heavy Metal
Heavy metal was inspired by turning the shadows Stainless steel
of a table into light. The stainless steel reflects the Solid and veneered wood
surrounding light and illuminates what is normally lost
in shadows. Andrew incorporates the shadow into his Walnut, maple, cherry
pieces; both the shadow cast on itself and the shadow 70lx32dx29h
cast on the surroundings. 3 part oil finish

12. Stripe Table
Stripe table was inspired by the Gees Bend Quilts of Available in:
Alabama. The quilts, which use geometric textile scraps and Solid walnut, maple, cherry
bold stitching for their design evolve as you encircle them. 72lx34dx29h
The machined lines within the table top seem to move as Machined grooves, raw or painted
the light and shadows change depending upon the viewers Leaf version available
angle. 3 part oil finish

13. Cross Roads Desk
Cross Roads Desk is a minimal table that breaks the symmetry of a Stainless Steel
traditional Desk. The hint of color, alternating between in and out,
gives a whimsical slant. Glass
Pigmented Lacquer
92lx34dx29h

14. Laptop Desk
Laptop Desk is a modern functioning desk Available in:
reminiscent of traditional school desks. Solid walnut, maple, cherry
With wire management and storage built in for 55lx32dx28h
electronics, the ink well has been replaced. Hidden shelf for power strip
and transformers
Standard 41 co-sponsored “the Desk Project” for Wire management
Kids of Kathmandu. The auction of 11 original 3 part oil finish
desks from 11 designers helped pay for the
education of 41 orphans in Nepal.

15. Barts Desk
Barts Desk is a new design based on our console table. The middle Solid and veneered wood
drawer can function as a docking station for a netbook, with a wire
management system built in. walnut, maple, cherry
44lx18dx33h
3 part oil finish

16. DKNY Chairs

17. Dining Chair
Oh! Donald-Front
Oh! Donna -Back
DKNY Chairs
DKNY approached Standard 41 and wanted a Solid and Veneers
“feminized” version of Standard 41’s dining chair for their
showroom. After three weeks of prototyping the choice
came down to two similar chairs except one had a return
on the leg and one had one gentle curve running the entire
length of the back leg. DKNY went with the one with the
return-more feminine. Standard 41 has decided to include
both in their line.
A whole spectrum of woods and colors available.

19. Love Chaise
A Chaise for two. Available in Solid and veneered
Walnut, maple, cherry
Outdoor version for poolside Stainless steel
relaxation available. Upholstered cushions in Rayon
wool blend
50lx33dx32h
3 part oil finish

20. Standard 41’s version of a classic arm chair.
Lounge Chair
Available in solid
walnut, maple, cherry
Upholstered cushions in Rayon wool
blend
33lx33dx29h
3 part oil finish

21. Lounge Chair
Love Chaise

22. Bridge Stool
Plank Bench
Minimal Seating
Standard 41 offers several minimal seating options to Availabe in solid:
accompany their tables. Walnut, maple, cherry
3 part oil finish

23. Slant Credenza
Mid-Century for this century.

24. Slant Credenza
A classic, mid-century inspired credenza for today’s needs. Available in Solid and veneered
The Slant Credenza is infinitely customizable. Walnut, maple, cherry
60lx22dx29h
Wine storage
components
Wire management
Infinite possibilities
3 part oil finish

25. Big Boy
The Big Boy is as promised, Big. Custom designed and Available in Solid and veneered
fabricated to fit a myriad of needs. Walnut, maple, cherry
96lx22dx29h
Wine storage
components
Wire management
Infinite possibilities
3 part oil finish

26. Standard 41 is just six generations and a few years old. It all started in the Austro-Hungarian Empire, with Raible father and sons working as
furniture makers, cabinetmakers, instrument makers and, legend would have it, chicken thieves.
In a fit of independence, Andrew Raible, the sixth generation, explored advertising, graphic design and other respectable jobs before going
back to grad school (Pratt Institute) to study furniture and Industrial design. He was back to the inevitable wood shop.
After several successful partnerships and collaborations (Refinery Furniture, 3 Square Design) Andrew started Standard 41 to create a line
of furniture that tends towards reinterpretations of mid-century Scandinavian and American designs - with a sculptural twist. His minimal
furniture’s clarity and restraint often belie its practicality and usefulness. And over time, a seemingly austere table, chair or credenza reveals
a hidden sense of fun.
John Raible, the father and architect, was, to anyone that knew him, a sculptor. He taught his son to play more with angles, to embrace the
idea that a curve, a swirl, and a knot are not beyond or below the realm of a minimalist Raible.
Andrew is constantly thinking and rethinking minimalism and modernism, exploring ways to create pieces that are true to an aesthetic he
was raised on, but one that can breathe and can offer new life in today’s world.
Standard41 continues to grow in its partnerships with showrooms and manufacturers. It also remains true to what has sustained the Raibles
through the generations, the relationship with individual clients. With John joining past chicken thieves in May of 2008, the generations
are looking down more than ever. Andrew is integrating the combined experience of his forefathers into a company that acknowledges the
past and also embraces the future..
Taible is the next evolution of Standard 41; A collection of modern, minimal and slightly quirky tables as well as seating to accompany
them. We focus on the unique design and customization of our work. Our tables are designed to be lived with for generations. We always
will.

27. April 2011

28. October 2010

29. October 2010

31. Furniture that doesn’t take itself too seriously is here in the Stripe
dining table. Clean lines hold down a vibrant stripe in a white
lacquer inlay, and your choice of walnut, cherry, or maple. A great
twist for the adventurous-no need for tablecloths.

33. We customize any of our pieces and look forward to working together to design and fabricate unique work.
Please feel free to contact us regarding any and all questions.
While Standard 41 has a modern and minimal design aesthetic, our new venture, Standard 41 Collaborates, broadens our horizon. We are col-
laborating with numerous talented artisans of metal, stone, wood, finishing, upholstery, and glass to assist you in fabricating any design you can
think up. We can help you take an idea from sketch to renderings, shop drawings and thru fabrication.We enjoy the collaborative nature of these
projects, they allow us to work with you in realizing your designs come to life.We have worked with high end Interior Designers, home owners
who have a vision but don’t know how to pursue it to it’s end, and with other fabricators who needed a connection to other artisans.Send us
your sketch, we’ll go from there.
Andrew Raible
917/805-0835
andrew@standard41.com
andrew@taible.com