本研究は、開発途上国におけるより効果的な水・衛生教育のあり方について、ラオス農村部の小学校において独自に行ったフィールド調査の結果を用いて検証を行った。今日、世界の国々は富める先進国と貧困に悩む途上国に分けられ、その暮らしのあまりにも大きな差は、さも世界が二分化されていると言っても過言ではない。そして今、その内の途上国は貧困を引き金とした飢餓や教育の不足等の多くの社会問題を抱えている。その中の一つに水・衛生問題がある。水は人間にとって生命の維持や生活に欠くことのできないものであり、2015年に国連が定めた「持続可能な開発目標」（Sustainable Development Goals: SDGs）でも全ての人々が安全な水を使用できることを項目の一つに掲げられているほどである。しかし現状、世界では約9億人もの人々が安全な水にアクセスをすることができず、そしてそのほとんどは途上国の住民である。今回、我々はこの水・衛生問題に着眼し、2016年9月にラオスの小学校に赴いて質問票調査とインタビュー調査を行った。今回はそれにより得た調査結果と、これまでの論文のデータに基づき、途上国の水・衛生の現状と、その子どもの健康への影響を計量経済学的に検証した上で、今後実行可能な方策を提示する。
本研究は、開発途上国におけるより効果的な水・衛生教育のあり方について、ラオス農村部の小学校において独自に行ったフィールド調査の結果を用いて検証を行った。今日、世界の国々は富める先進国と貧困に悩む途上国に分けられ、その暮らしのあまりにも大きな差は、さも世界が二分化されていると言っても過言ではない。そして今、その内の途上国は貧困を引き金とした飢餓や教育の不足等の多くの社会問題を抱えている。その中の一つに水・衛生問題がある。水は人間にとって生命の維持や生活に欠くことのできないものであり、2015年に国連が定めた「持続可能な開発目標」（Sustainable Development Goals: SDGs）でも全ての人々が安全な水を使用できることを項目の一つに掲げられているほどである。しかし現状、世界では約9億人もの人々が安全な水にアクセスをすることができず、そしてそのほとんどは途上国の住民である。今回、我々はこの水・衛生問題に着眼し、2016年9月にラオスの小学校に赴いて質問票調査とインタビュー調査を行った。今回はそれにより得た調査結果と、これまでの論文のデータに基づき、途上国の水・衛生の現状と、その子どもの健康への影響を計量経済学的に検証した上で、今後実行可能な方策を提示する。
Chemo bio synthesis of silver nanoparticlesJagpreet Singh
Silver nanoparticles have a lot of ways of synthesis like physical and chemical
methods; some of these methods use a lot of chemical substances and are
very hazardous for humans and environment, so a novel, great, environmental
friendly, cheap and easy to use world of green chemistry has been used. A
number of characterization techniques such as UV-visible spectroscopy, Fourier
transformation infrared spectroscopy, X-ray diffraction study and scanning
electron microscopy revealed that silver nanoparticles have been used. Thus
the different response of the functional groups and the difference in the peaks
and UV-visible data was studied and then compared to understand and know
the way these different reducing agents react to the same starting material. The
green synthesis had a UV-visible peak at 446 nm while the one with chemical
synthesis had a peak at 395 nm. FTIR results of silver nanoparticles synthesis
by trisodium citrate (TSC) showed a peak at 1505 cm-1 which shows that the
compound has a stretching of the -C=C – bond. In another case, which was done
by using Sodium borohydride (NaBH4) a peak at 1695 cm-1 showed a –C=O- bond
indicating stretching and a weak absorption intensity. Another peak was present
which indicates a –O-H bond formation and presence which is a strong bond are
found to exist. A notable peak came for synthesis by orange peel at 1517 cm-1
which represents a –C=C- bond stretching as in aromatic compounds. Another
peak at 1732 cm-1 indicates the –C=O- bond. The XRD results on one of the
silver sample prepared by green methods showed silver nanomaterials formed
which had a average particle size of around 42 nm. FE-SEM results revealed that
silver nanomaterials were formed and had a flake like appearance in one of the
results. All the overall comparison showed that different modes of synthesis
of silver nanomaterials and different reducing agents give same materials but
with different peaks and intensities. All this data provided knowledge about the
fact that an alternative method can be used to create new nanoparticles if one
of the previously considered to tried method fails thus helping in extending the
broadways for research.
Synthesis of Spinel based Catalysts by Wet chemical methods for Colour Remova...PranavkumarRana
The study aimed at color removal and COD degradation of
synthetic wastewater of methylene blue dye via photocatalysis using various spinel catalysts
prepared by different methods. The methylene blue dye with strong azo bond with structure
made up of autochrome and chromophore. The Azo dyes are widely used in textile, paper and
leather industries. The present study is essentially related to the degradation of selected
methylene blue and dye from synthetic dye wastewater however it has been extended to actual
industrial effluents. In order to control wastewater pollution due to dyes the UV-Photocatalytic
degradation technology has been carried out by some researchers using spinel catalysts. Spinel
catalysts are oxides with general formula AB2O4 where A and B are the rare earth, A has
octahedral site and B has tetrahedral site. alkaline earth, alkali metals and transition metal
cations which are expected to be able to overcome the limitations of semiconductors as
photocatalysts.
Visible Light Induced Selective Photocatalytic Oxidation of Benzyl Amine to N...IJERA Editor
Irradiated semiconductor catalysis in the presence of molecular oxygen can be considered as an innovative and sustainable technique for organic transformations. The present work reports the preparation ofGraphene oxide/TiO2composite by improved Hummer’s method followed by hydrothermal technique. The prepared system was characterized by various physico-chemical techniques such as X-Ray diffraction, IR-Spectroscopy, UV-DRS, XPS, SEM and TEM Analysis.On reaction, benzylamine in CH3CN yieldedN-benzylidene-1-phenylmethanamine as the sole product. The reaction was monitored by GC-MS Analysis.
Transparent and Conducting TiO2 : Nb Thin Films Prepared by Spray Pyrolysis T...arj_online
To date, only sputtering and pulsed laser deposition (PLD) techniques have been employed
successfully to fabricate highly conducting and transparent TiO2:Nb (TNO) films. In this article, we demonstrate
that transparent and conducting
TiO2
: Nb
films can be made by the spray pyrolysis technique. The films were
deposited on Corning 7059 glass substrates at 500
15˚C using an alcoholic precursor solution consisting of
titanium (iv) isopropoxide and
NbCl5
. The influence of increasing
Nb
concentration on the electrical, optical
and structural properties was investigated. The minimum resistivity, 3.36
-3 10
Ω cm, for
Ti1-xNbxO2
film (x
= 0.15) was obtained after 1 hour post deposition annealing in hydrogen atmosphere at 500˚C. The x-ray
diffraction of hydrogen annealed films showed a polycrystalline anatase (004)-oriented phase without any second
phases. The optical band gap for undoped and doped films lay in the range 3.38 – 3.47 eV. Using dispersion
analysis, optical constants were determined from spectro-photometric measurements for films on glass.
Visible Light Assisted Degradation of Eosin Yellow using Heteroatom Functiona...IJERA Editor
10 ppm EY dye were successfully photodegraded using visible light active 0.75wt% Ba & 0.25wt% Zr codoped
TiO2 nanomaterial that were synthesized by Sol-gel method as nanomaterials under irradiation for 20
minutes and characterized by various advanced instrumental techniques. The X-ray Diffraction Spectroscopic
showed that the prepared nanomaterial were in the anatase phase with 2θ at 25.3º. UV-visible Diffuse
Reflectance Spectra analysis explained that the dopants found in the TiO2, imparts a significance absorption
shift towards visible region and their exisistance were confirmed by X-ray Photoelectron Spectral data.
Quantitatively the formation of hydroxyl radical by the nanomaterial in aqueous solution under visible
light irradiation was investigated by the photoluminiscent technique. Finally the effects of different parameters
in the photocatalytic degradation of EY were established in aqueous solution
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Chemo bio synthesis of silver nanoparticlesJagpreet Singh
Silver nanoparticles have a lot of ways of synthesis like physical and chemical
methods; some of these methods use a lot of chemical substances and are
very hazardous for humans and environment, so a novel, great, environmental
friendly, cheap and easy to use world of green chemistry has been used. A
number of characterization techniques such as UV-visible spectroscopy, Fourier
transformation infrared spectroscopy, X-ray diffraction study and scanning
electron microscopy revealed that silver nanoparticles have been used. Thus
the different response of the functional groups and the difference in the peaks
and UV-visible data was studied and then compared to understand and know
the way these different reducing agents react to the same starting material. The
green synthesis had a UV-visible peak at 446 nm while the one with chemical
synthesis had a peak at 395 nm. FTIR results of silver nanoparticles synthesis
by trisodium citrate (TSC) showed a peak at 1505 cm-1 which shows that the
compound has a stretching of the -C=C – bond. In another case, which was done
by using Sodium borohydride (NaBH4) a peak at 1695 cm-1 showed a –C=O- bond
indicating stretching and a weak absorption intensity. Another peak was present
which indicates a –O-H bond formation and presence which is a strong bond are
found to exist. A notable peak came for synthesis by orange peel at 1517 cm-1
which represents a –C=C- bond stretching as in aromatic compounds. Another
peak at 1732 cm-1 indicates the –C=O- bond. The XRD results on one of the
silver sample prepared by green methods showed silver nanomaterials formed
which had a average particle size of around 42 nm. FE-SEM results revealed that
silver nanomaterials were formed and had a flake like appearance in one of the
results. All the overall comparison showed that different modes of synthesis
of silver nanomaterials and different reducing agents give same materials but
with different peaks and intensities. All this data provided knowledge about the
fact that an alternative method can be used to create new nanoparticles if one
of the previously considered to tried method fails thus helping in extending the
broadways for research.
Synthesis of Spinel based Catalysts by Wet chemical methods for Colour Remova...PranavkumarRana
The study aimed at color removal and COD degradation of
synthetic wastewater of methylene blue dye via photocatalysis using various spinel catalysts
prepared by different methods. The methylene blue dye with strong azo bond with structure
made up of autochrome and chromophore. The Azo dyes are widely used in textile, paper and
leather industries. The present study is essentially related to the degradation of selected
methylene blue and dye from synthetic dye wastewater however it has been extended to actual
industrial effluents. In order to control wastewater pollution due to dyes the UV-Photocatalytic
degradation technology has been carried out by some researchers using spinel catalysts. Spinel
catalysts are oxides with general formula AB2O4 where A and B are the rare earth, A has
octahedral site and B has tetrahedral site. alkaline earth, alkali metals and transition metal
cations which are expected to be able to overcome the limitations of semiconductors as
photocatalysts.
Visible Light Induced Selective Photocatalytic Oxidation of Benzyl Amine to N...IJERA Editor
Irradiated semiconductor catalysis in the presence of molecular oxygen can be considered as an innovative and sustainable technique for organic transformations. The present work reports the preparation ofGraphene oxide/TiO2composite by improved Hummer’s method followed by hydrothermal technique. The prepared system was characterized by various physico-chemical techniques such as X-Ray diffraction, IR-Spectroscopy, UV-DRS, XPS, SEM and TEM Analysis.On reaction, benzylamine in CH3CN yieldedN-benzylidene-1-phenylmethanamine as the sole product. The reaction was monitored by GC-MS Analysis.
Transparent and Conducting TiO2 : Nb Thin Films Prepared by Spray Pyrolysis T...arj_online
To date, only sputtering and pulsed laser deposition (PLD) techniques have been employed
successfully to fabricate highly conducting and transparent TiO2:Nb (TNO) films. In this article, we demonstrate
that transparent and conducting
TiO2
: Nb
films can be made by the spray pyrolysis technique. The films were
deposited on Corning 7059 glass substrates at 500
15˚C using an alcoholic precursor solution consisting of
titanium (iv) isopropoxide and
NbCl5
. The influence of increasing
Nb
concentration on the electrical, optical
and structural properties was investigated. The minimum resistivity, 3.36
-3 10
Ω cm, for
Ti1-xNbxO2
film (x
= 0.15) was obtained after 1 hour post deposition annealing in hydrogen atmosphere at 500˚C. The x-ray
diffraction of hydrogen annealed films showed a polycrystalline anatase (004)-oriented phase without any second
phases. The optical band gap for undoped and doped films lay in the range 3.38 – 3.47 eV. Using dispersion
analysis, optical constants were determined from spectro-photometric measurements for films on glass.
Visible Light Assisted Degradation of Eosin Yellow using Heteroatom Functiona...IJERA Editor
10 ppm EY dye were successfully photodegraded using visible light active 0.75wt% Ba & 0.25wt% Zr codoped
TiO2 nanomaterial that were synthesized by Sol-gel method as nanomaterials under irradiation for 20
minutes and characterized by various advanced instrumental techniques. The X-ray Diffraction Spectroscopic
showed that the prepared nanomaterial were in the anatase phase with 2θ at 25.3º. UV-visible Diffuse
Reflectance Spectra analysis explained that the dopants found in the TiO2, imparts a significance absorption
shift towards visible region and their exisistance were confirmed by X-ray Photoelectron Spectral data.
Quantitatively the formation of hydroxyl radical by the nanomaterial in aqueous solution under visible
light irradiation was investigated by the photoluminiscent technique. Finally the effects of different parameters
in the photocatalytic degradation of EY were established in aqueous solution
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptx
中間報告 スライド
1. Analysis the power during the
process gold nanoparticles growth
made by ultrasonic irradiation
Department of Sustainable System Sciences
Tanaka Yuki
Nov. 30th
2. Contents
1 Analysis the power during the process gold nanoparticles growth
made by ultrasonic irradiation
1.1 | The purpose of this study
1.2 | Reaction Principles
1.3 | Surface Plasmon Resonance ( Not complete )
1.4 | Analysis of GNPs Growth with UV-vis
1.5 | Experiment and results
1.6 | Discussion
2016/11/30 1
3. Contents
2 The effect of substances in the solution on the bubbles caused
by ultrasonic irradiation
2.1 | Experimental method
2.2 | Substances
2.3 | Results and consideration
3 Conclusion
2016/11/30 2
4. The purpose of this study
• To control the size of gold nanoparticles
(GNPs) by changing the ultrasonic intensity
• To find more easier process of this than
previous method
2016/11/30 3
1) Stepwise Preparation of Spherical Gold Nanoparticles Passivated with
Cationic Amphiphiles, Yuki Inoue,Yo Tsutamoto,Daiki Muko,
ANALYTICAL SCIENCES,2016,vo.32,p 875~880
5. Reaction principle of GNP seeds made by
ultrasonic irradiation
Au(Ⅰ) Stabilized with
Cetyl trimethyl ammonium bromide(CTAB)
2016/11/30 4
Au+
Ultrasonic irradiation
AuPyrolysis
H2O →・OH + ・H
Radical reaction
RH +・OH → M + H2O
RH +・H → M + H2
Au(Ⅰ) reduction action
Au(Ⅰ) + M → Au + H+ + M`
Au
Under ascorbic asid
Au(Ⅰ)seeds formation reaction
m Au → Au m
Au seed
~5nm
Au
Au
6. Reaction principle of growth of GNP seeds
2016/11/30 5
Au
Au+
Au
Au
Growth of GNP seeds
Au m + Au → Au m+1
GNPs (5 ~ 100 nm)
9. Experimental method
2016/11/30 8
About
60 ml
28℃
4mm
Ultrasonic
oscillator
HAuCl4
CTAB
Ascorbic acid
Thermocouple
Under Ar Irradiation
Frequency : 200 kHz
Output : 200 W
Irradiation time : 2 min
Measured GNPs growth
with UV-vis
Measured temperature change
with thermocouple
10. Results ~ analysis of GNPs growth ~
2016/11/30 9
0
0.1
0.2
0.3
0.4
0.5
250 350 450 550 650 750
Absorbance
Wave length ( nm )
20 min
18 min
16 min
14 min
12 min
10 min
8 min
6 min
4 min
2 min
Standing time
11. Results ~ temperature change ~
2016/11/30 10
28
29
30
31
32
33
34
35
0 50 100 150
Solutiontemperature(℃)
Time ( s )
Pure water
Au solution
Stopped
irradiation
Temperature difference
Au solutionPure water
33.1 ℃ 34.2 ℃
* Temperature after irradiation stopped
13. Discussion
・Substances dissolved in solution effect on the bubbles
・Before control the size of gold nanoparticles (GNPs) by
changing the ultrasonic intensity, experienced the
effect of dissolved substances.
2016/11/30 12
Possibility
14. The effect of substances in the
solution on the bubbles caused
by ultrasonic irradiation
15. Experimental method
2016/11/30 14
About
60 ml
28℃
4mm
Ultrasonic
oscillator
Under Ar Irradiation
Frequency : 200 kHz
Output : 200 W
Irradiation time : 2 min
Measured temperature change
with thermocouple
Thermocouple
Methanol
or
Isopropanol
17. Results ~ temperature change ~
2016/11/30 16
28
29
30
31
32
33
34
35
36
37
0 50 100 150
Solutiontemperature(℃)
Time (s)
▲ Methanol
■ Pure water
◆ Isopropanol
Stopped
irradiation
Temperature difference
Obtained Data
Methanol > Pure water > Isopropanol
Why did not ?
Isopropanol > Pure water
18. Consideration
2016/11/30 17
A bubble in the Isopropanol solution
Cavitation bubble
Hydrophobic substances
adhered on the surface of the bubbles
effect on the bubble`s characteristic.
19. Conclusion
• Substances in the solution probably effect on the bubble
characteristic
• The condition that the bubble`s change should be considered
to control the size of gold nanoparticles (GNPs) by changing
the ultrasonic intensity
2016/11/30 18
