What happens when your applications goes to Live? Where is the root cause of the problem? Is it the problem with my codes or the infrastructure that is hosting it? In this session, we will learn how System Center Operations Manager 2007 and System Center AVICode will be able to work together to provide end-to-end monitoring of your critical Business Application. Whilst it might not solve all mankind problems; but it surely will be able to resolve the never ending dispute between developers and system administrators on what went wrong when a problem occurs on the application.
A Fully Automatic Multimeter Calibration SystemNIMT
The document describes a fully automatic multimeter calibration system using a programmable switch. Key points:
1) A programmable switch was designed to automatically reconfigure cables for calibration without manual intervention.
2) The switch was inserted into an automatic calibration system to calibrate a multimeter.
3) Results showed the automatic system calibrated the multimeter as accurately as the manual system, reducing calibration time from 35 to 25 minutes.
Basic Principles of Radiation Thermometry and Thermometer CalibrationsNIMT
This document provides an overview of radiation thermometry and calibration of radiation thermometers. It begins with definitions of blackbody radiation and emissivity. It then describes the components and design considerations of spectral radiation thermometers. The document discusses factors to consider for non-contact temperature measurements such as suitable target-sensor distance. It also covers detector types, advantages of radiation thermometers, and common calibration methods including fixed point calibration and spectral responsivity measurement. Finally, it identifies uncertainty sources that can affect the accuracy of radiation thermometer calibrations.
Thailand Reference Material (TRM) คือชื่อทางการค้าของวัสดุ
อ้างอิงรับรองที่ผลิตโดยสถาบันมาตรวิทยาแห่งชาติ หรือหน่วยงานอื่นภายในประเทศที่สถาบันมาตรวิทยาแห่งชาติมอบหมาย โดยกระบวนการผลิต TRM เป็นไปตามข้อกำหนด ISO 17034: General requirements for the competence of reference material producers และ ISO GUIDE 35:Reference materials-Guidance for characterization and assessment of homogeneity and stability TRM สามารถสอบกลับได้ทางมาตรวิทยา (Traceable) ไปยัง SI Units ซึ่งในทางเคมีคือ หน่วย Mole (mol) โดยผ่านการให้ค่าจากห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติ ซึ่งได้ผ่านการเปรียบเทียบความสามารถในการวัดกับห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติของประเทศที่ ได้รับการยอมรับในระดับนานาชาติเช่น สหรัฐอเมริกา เยอรมันนี และญี่ปุ่น เป็นต้น วัสดุอ้างอิงรับรองเป็นวัสดุหรือสารมาตรฐานที่มีความเป็นเนื้อเดียว มีความเสถียรและมีใบรับรองค่าของคุณสมบัติที่เราสนใจ พร้อมแสดงค่าความไม่แน่นอนของผลการวัดและระบุการสอบกลับได้ของผลการวัดวัสดุอ้างอิง/วัสดุอ้างอิงรับรองเป็นส่วนหนึ่งที่มีความสำคัญต่อห้องปฏิบัติการวิเคราะห์และทดสอบ ใช้สำหรับ 1) สอบเทียบเครื่องมือ 2) ตรวจสอบความใช้ได้/ยืนยันความถูกต้องของวิธีทดสอบ และ 3) ควบคุมคุณภาพของวิธีการทดสอบ ทำให้ห้องปฏิบัติการของประเทศไทยสามารถวิเคราะห์ทดสอบได้อย่างถูกต้องและมีคุณภาพตามมาตรฐานตามระบบสากล
The document discusses the importance of illuminance meters having an accurate spectral response that matches the CIE luminous efficiency function V(λ). The author participated in a training program in Thailand on photometry standards. He conducted an experiment at NPLI where standard detectors and detectors from commercial luxmeters were tested behind blue and red filters. Ratios of the detector responses (R/B ratio) with the filters were calculated and compared. Standard detectors produced R/B ratios from 0.25 to 0.35, matching CIE values based on their spectral match. Commercial luxmeter detectors showed scattered R/B ratios, indicating they were not corrected for V(λ). The author concludes all luxmeters should have a V(λ)
1. Torque is a measure of rotational force and is important in many engineering applications. Regular calibration of torque tools is necessary to ensure accuracy and traceability to standards.
2. Hand torque tools are commonly used in research, inspections, and production. The document outlines standards for calibrating and classifying hand torque tools.
3. Torque wrench calibration devices must also be calibrated regularly according to standards. Participants calibrated a torque transducer using a torque wrench as the standard and prepared calibration procedures.
What happens when your applications goes to Live? Where is the root cause of the problem? Is it the problem with my codes or the infrastructure that is hosting it? In this session, we will learn how System Center Operations Manager 2007 and System Center AVICode will be able to work together to provide end-to-end monitoring of your critical Business Application. Whilst it might not solve all mankind problems; but it surely will be able to resolve the never ending dispute between developers and system administrators on what went wrong when a problem occurs on the application.
A Fully Automatic Multimeter Calibration SystemNIMT
The document describes a fully automatic multimeter calibration system using a programmable switch. Key points:
1) A programmable switch was designed to automatically reconfigure cables for calibration without manual intervention.
2) The switch was inserted into an automatic calibration system to calibrate a multimeter.
3) Results showed the automatic system calibrated the multimeter as accurately as the manual system, reducing calibration time from 35 to 25 minutes.
Basic Principles of Radiation Thermometry and Thermometer CalibrationsNIMT
This document provides an overview of radiation thermometry and calibration of radiation thermometers. It begins with definitions of blackbody radiation and emissivity. It then describes the components and design considerations of spectral radiation thermometers. The document discusses factors to consider for non-contact temperature measurements such as suitable target-sensor distance. It also covers detector types, advantages of radiation thermometers, and common calibration methods including fixed point calibration and spectral responsivity measurement. Finally, it identifies uncertainty sources that can affect the accuracy of radiation thermometer calibrations.
Thailand Reference Material (TRM) คือชื่อทางการค้าของวัสดุ
อ้างอิงรับรองที่ผลิตโดยสถาบันมาตรวิทยาแห่งชาติ หรือหน่วยงานอื่นภายในประเทศที่สถาบันมาตรวิทยาแห่งชาติมอบหมาย โดยกระบวนการผลิต TRM เป็นไปตามข้อกำหนด ISO 17034: General requirements for the competence of reference material producers และ ISO GUIDE 35:Reference materials-Guidance for characterization and assessment of homogeneity and stability TRM สามารถสอบกลับได้ทางมาตรวิทยา (Traceable) ไปยัง SI Units ซึ่งในทางเคมีคือ หน่วย Mole (mol) โดยผ่านการให้ค่าจากห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติ ซึ่งได้ผ่านการเปรียบเทียบความสามารถในการวัดกับห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติของประเทศที่ ได้รับการยอมรับในระดับนานาชาติเช่น สหรัฐอเมริกา เยอรมันนี และญี่ปุ่น เป็นต้น วัสดุอ้างอิงรับรองเป็นวัสดุหรือสารมาตรฐานที่มีความเป็นเนื้อเดียว มีความเสถียรและมีใบรับรองค่าของคุณสมบัติที่เราสนใจ พร้อมแสดงค่าความไม่แน่นอนของผลการวัดและระบุการสอบกลับได้ของผลการวัดวัสดุอ้างอิง/วัสดุอ้างอิงรับรองเป็นส่วนหนึ่งที่มีความสำคัญต่อห้องปฏิบัติการวิเคราะห์และทดสอบ ใช้สำหรับ 1) สอบเทียบเครื่องมือ 2) ตรวจสอบความใช้ได้/ยืนยันความถูกต้องของวิธีทดสอบ และ 3) ควบคุมคุณภาพของวิธีการทดสอบ ทำให้ห้องปฏิบัติการของประเทศไทยสามารถวิเคราะห์ทดสอบได้อย่างถูกต้องและมีคุณภาพตามมาตรฐานตามระบบสากล
The document discusses the importance of illuminance meters having an accurate spectral response that matches the CIE luminous efficiency function V(λ). The author participated in a training program in Thailand on photometry standards. He conducted an experiment at NPLI where standard detectors and detectors from commercial luxmeters were tested behind blue and red filters. Ratios of the detector responses (R/B ratio) with the filters were calculated and compared. Standard detectors produced R/B ratios from 0.25 to 0.35, matching CIE values based on their spectral match. Commercial luxmeter detectors showed scattered R/B ratios, indicating they were not corrected for V(λ). The author concludes all luxmeters should have a V(λ)
1. Torque is a measure of rotational force and is important in many engineering applications. Regular calibration of torque tools is necessary to ensure accuracy and traceability to standards.
2. Hand torque tools are commonly used in research, inspections, and production. The document outlines standards for calibrating and classifying hand torque tools.
3. Torque wrench calibration devices must also be calibrated regularly according to standards. Participants calibrated a torque transducer using a torque wrench as the standard and prepared calibration procedures.
Summary Report of the TCTP on Strengthening of Measurement Standards Institut...NIMT
The Third Country Training Programme on Strengthening of Measurement Standards Institutes of Asia Pacific Countries was held from January 16 to February 24, 2012 in Thailand. Twenty counterparts from 11 countries received training in 5 measurement standards including angle, photometry, radiation thermometry, RF, and torque standards. In addition to technical training, the counterparts participated in training on teamwork and cultural activities like a visit to Chang Island and a night show. All counterparts cooperated well during the intensive schedule and produced calibration certificates and procedures, demonstrating their commitment to applying the skills learned back in their home countries.
CCQM-K81 : Measurement of Chloramphenicol in Pig MuscleNIMT
This document summarizes a key comparison study for the determination of chloramphenicol in pig muscle conducted by the National Institute of Metrology, Thailand (NIMT). The study involved analysis of lyophilized pig muscle samples containing chloramphenicol at around the EU's maximum residue level of 0.3 μg/kg. NIMT used isotope dilution mass spectrometry with an in-house assessed chloramphenicol standard for quantification, and sample preparation involved extraction, solid phase extraction cleanup, and analysis by liquid chromatography-tandem mass spectrometry. NIMT's results were included in the calculation of the key comparison reference value.
The document appears to be a collection of symbols and characters without clear meaning in English. It includes punctuation marks, letters, and numbers arranged without spaces or organization into words or sentences. The formatting is also inconsistent with lines of varying lengths containing different groupings of symbols. The overall content and intent is unclear from the document as written.
2. ขน�ดคว�มรุนแรงของแผ่นดินไหว
กำรเรียกขนำดควำมรุนแรงของแผ่นดินไหวซึ่งตรงกับค�ำว่ำ SIZE ในภำษำอังกฤษนั้น สำมำรถบอกได้ 2 วิธี
วิธีแรก เป็นกำรบอก ความรุนแรง ของแผ่นดินไหวที่เรียกว่ำ Intensity เป็นกำรบอกควำมรุนแรงที่เกิดขึ้นของแผ่นดินไหว โดยมีตำรำง
บรรยำยเปรียบเทียบเรียงล�ำดับจำกควำมรับรู้ของคน หรือผลกระทบที่มีต่อสิ่งปลูกสร้ำงหรือพื้นดิน เรียงล�ำดับควำมเสียหำยจำกน้อยไปมำก รวมถึง
สภำพทำงธรณีวิทยำที่เปลี่ยนแปลง ซึ่งมำตรำบอกควำมรุนแรงที่นิยมใช้คือมำตรำเมอร์แคลลี่ (Modified Mercalli Intensity) ซึ่งแบ่งออกเป็น
12 อันดับ ดังนี้
I. Instrumental Not felt by many people unless in favourable conditions.
II. Feel able Felt only by a few people at best, especially on the upper floors of buildings. Delicately suspended objects may swing.
Felt quite noticeably by people indoors, especially on the upper floors of buildings. Many do not recognize it as an
III. Slight
earthquake. Standing motor cars may rock slightly. Vibration similar to the passing of a truck. Duration estimated.
Felt indoors by many people, outdoors by few people during the day. At night, some awakened. Dishes, windows,
IV. Moderate doors disturbed; walls make cracking sound. Sensation like heavy truck striking building. Standing motor cars rock
noticeably. Dishes and windows rattle alarmingly.
Felt outside by most, may not be felt by some outside in non-favourable conditions. Dishes and windows may break
V. Rather Strong
and large bells will ring. Vibrations like large train passing close to house.
Felt by all; many frightened and run outdoors, walk unsteadily. Windows, dishes, glassware broken; books fall off
VI. Strong
shelves; some heavy furniture moved or overturned; a few instances of fallen plaster. Damage slight.
Difficult to stand; furniture broken; damage negligible in building of good design and construction; slight to moderate
VII. Very Strong in well-built ordinary structures; considerable damage in poorly built or badly designed structures; some chimneys
broken. Noticed by people driving motor cars.
Damage slight in specially designed structures; considerable in ordinary substantial buildings with partial collapse.
VIII. Destructive Damage great in poorly built structures. Fall of chimneys, factory stacks, columns, monuments, walls. Heavy furniture
moved.
General panic; damage considerable in specially designed structures, well designed frame structures thrown out of
IX. Ruinous
plumb. Damage great in substantial buildings, with partial collapse. Buildings shifted off foundations.
Some well built wooden structures destroyed; most masonry and frame structures destroyed with foundation. Rails
X. Disastrous
bent.
XI. Very Disastrous Few, if any masonry structures remain standing. Bridges destroyed. Rails bent greatly.
Total damage - Everything is destroyed. Total destruction. Lines of sight and level distorted. Objects thrown into the
XII. Catastrophic
air. The ground moves in waves or ripples. Large amounts of rock move position.
9
Vol.12 No.56 May-June 2010
3. ส่วนวิธีที่ 2 เป็นกำรบอกขนาด – Magnitude ของแผ่นดินไหวจำกพลังงำนของแผ่นดินไหวที่ปลด
ปล่อยออกมำ มำตรำที่ใช้ในกำรวัดมีหลำยมำตรำแต่ที่รู้จักกันดี คือ มำตรำของริกเตอร์ (Richter Scale) ซึ่งตั้ง
เป็นเกียรติแก่นักวิทยำศำสตร์ชำวอเมริกัน ชำร์ล ฟรำนซิส ริกเตอร์ (Charles Francis Richter) ผู้คิดค้นวิธี
ค�ำนวณขนำดแผ่นดินไหวจำกขนำดของควำมสูงของคลื่นแผ่นดินไหว ที่ตรวจวัดได้ด้วยเครื่องมือตรวจ
แผ่นดินไหว เพื่อบ่งบอกขนำดของแผ่นดินไหว ณ ต�ำแหน่งทีเ่ กิดหรือทีเ่ รียกว่ำ “ศูนย์กลางแผ่นดินไหว” โดยทำง
วิชำกำรแผ่นดินไหว (Seismology) ใช้วิธีกำรบอกขนำดแผ่นดินไหวว่ำ “แผ่นดินไหวขนาด X” เท่ำนั้น แต่
ประชำชนทั่วไปมักใช้ว่ำ “แผ่นดินไหวขนาด X ริกเตอร์”
Richter Approximate
Approximate TNT for Joule
Seismic Energy equivalent Example
Magnitude Yield
0.0 1 kg (2.2 lb) 4.2 MJ
0.5 5.6 kg (12.4 lb) 23.5 MJ Large hand grenade
1.0 32 kg (70 lb) 132.3 MJ Construction site blast
1.5 178 kg (392 lb) 744.0 MJ WWII conventional bombs
2.0 1 metric ton 4.18 GJ Late WWII conventional bombs
2.5 5.6 metric tons 23.5 GJ WWII blockbuster bomb
3.0 31.6 metric tons 132.3 GJ Massive Ordnance Air Blast bomb
3.5 178 metric tons 747.6 GJ Chernobyl nuclear disaster, 1986
4.0 1 kiloton 4.18 TJ Small atomic bomb
4.5 5.6 kilotons 23.5 TJ
Nagasaki atomic bomb (actual seismic yield was
5.0 31.6 kilotons 134.4 TJ negligible since it detonated in the atmosphere)
Lincolnshire earthquake (UK), 2008
Little Skull Mtn. earthquake (NV, USA), 1992
5.5 178 kilotons 747.6 TJ Alum Rock earthquake (CA, USA), 2007
2008 Chino Hills earthquake (Los Angeles, USA)
6.0 1 megaton 4.18 PJ Double Spring Flat earthquake (NV, USA), 1994
Caracas (Venezuela), 1967 Rhodes (Greece), 2008
6.5 5.6 megatons 23.5 PJ
Eureka Earthquake (Humboldt County CA, USA), 2010
6.7 11.2 megatons 46.9 PJ Northridge earthquake (CA, USA), 1994
6.9 22.4 megatons 93.7 PJ San Francisco Bay Area earthquake (CA, USA), 1989
Java earthquake (Indonesia), 2009
7.0 31.6 megatons 132.3 PJ
2010 Haiti Earthquake
10
Vol.12 No.56 May-June 2010
4. Richter Approximate
Approximate TNT for Joule
Seismic Energy equivalent Example
Magnitude Yield
Energy released is equivalent to that of Tsar Bomba
(50 megatons, 210 PJ), the largest thermonuclear
7.1 44.7 megatons 186.9 PJ
weapon ever tested
1944 San Juan earthquake
Kashmir earthquake (Pakistan), 2005
7.5 178 megatons 744.0 PJ
Antofagasta earthquake (Chile), 2007
Tangshan earthquake (China), 1976
7.8 501 megatons 2.10 EJ
Hawke’s Bay earthquake (New Zealand), 1931)
San Francisco earthquake (CA, USA), 1906
Queen Charlotte earthquake (BC, Canada), 1949
México City earthquake (Mexico), 1985
8.0 1 gigaton 4.18 EJ Gujarat earthquake (India), 2001
Chincha Alta earthquake (Peru), 2007
Sichuan earthquake (China), 2008
1894 San Juan earthquake
Toba eruption[citation needed] 75,000 years ago;
8.5 5.6 gigatons 23.5 EJ the largest known volcanic event
Sumatra earthquake (Indonesia), 2007
8.8 15.8 gigatons 66.3 EJ Chile earthquake, 2010
9.0 31.6 gigatons 132.3 EJ Lisbon Earthquake (Lisbon, Portugal), All Saints Day, 1755
9.2 63.1 gigatons 264.0 EJ Anchorage earthquake (AK, USA), 1964
9.3 89.1 gigatons 372.9 EJ Indian Ocean earthquake, 2004
9.5 178 gigatons 744.0 EJ Valdivia earthquake (Chile), 1960
10.0 1 teraton 4.18 ZJ Never recorded by humans
Yucatán Peninsula impact (causing Chicxulub crater)
13.0 108 megatons 372.9 ZJ 65 Ma ago (108 megatons = 100 teratons; almost
5x1030 ergs = 500 ZJ)
11
Vol.12 No.56 May-June 2010