This document provides an overview of SRAN 19 dimensioning and supported configurations for the Flexi Multiradio 10 and AirScale System Modules. It describes the cell set concept where independent sub-configurations called "cell sets" can be combined to build full BTS configurations. The document outlines the SRAN and LTE cell sets that define the supported baseband and radio capacity for different technologies and combinations. It also lists the hardware modules supported in SRAN 19 and provides examples of dimensioning for GSM, WCDMA, LTE and shared modes.
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
Evolving to an open C-RAN Architecture for 5Gkinsleyaniston
This white paper provides an assesment of the emerging C-RAN architecture with a focus on the practical evolitionary path that will take mobile operators from the distributed RANs of today to the fully-virtualized and open cloud RANs of future. For more details, please visit: https://www.fujitsu.com/us/products/network/products/smart-xhaul-solutions/index.html
This guide covers the deployment of Aruba WLAN in a typical campus network, and it is considered part of the base designs guides within the VRD core technologies series. This guide covers the design recommendations for a campus deployment and it explains the various configurations needed to implement the Aruba secure, high-performance, multimedia grade WLAN solution in large campuses.
Business Case Scenarios in the Deployment of a WiMAX™ Network(quantumwimax.com)Ari Zoldan
It is very important for the operator or network planner to consider a variety of factors before forging ahead with WiMAX™ equipment choices and deployment alternatives. This white paper is intended to provide the reader with a perspective on the implications that various deployment choices have on the complexity and cost-effectiveness of the final WiMAX network.
CNCF TUG (Telecom User Group) Ike Alisson 5G New Service Capabilities Rev pa10Ike Alisson
5G New Service Capabilities (with an overview on the synergy between 5G CN and RAN (O-RAN Specifications) via CUPS and some of the Enhancements for URLLC UCs enhancements
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
Evolving to an open C-RAN Architecture for 5Gkinsleyaniston
This white paper provides an assesment of the emerging C-RAN architecture with a focus on the practical evolitionary path that will take mobile operators from the distributed RANs of today to the fully-virtualized and open cloud RANs of future. For more details, please visit: https://www.fujitsu.com/us/products/network/products/smart-xhaul-solutions/index.html
This guide covers the deployment of Aruba WLAN in a typical campus network, and it is considered part of the base designs guides within the VRD core technologies series. This guide covers the design recommendations for a campus deployment and it explains the various configurations needed to implement the Aruba secure, high-performance, multimedia grade WLAN solution in large campuses.
Business Case Scenarios in the Deployment of a WiMAX™ Network(quantumwimax.com)Ari Zoldan
It is very important for the operator or network planner to consider a variety of factors before forging ahead with WiMAX™ equipment choices and deployment alternatives. This white paper is intended to provide the reader with a perspective on the implications that various deployment choices have on the complexity and cost-effectiveness of the final WiMAX network.
CNCF TUG (Telecom User Group) Ike Alisson 5G New Service Capabilities Rev pa10Ike Alisson
5G New Service Capabilities (with an overview on the synergy between 5G CN and RAN (O-RAN Specifications) via CUPS and some of the Enhancements for URLLC UCs enhancements
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.