Spec 20180405054057
•
0 likes•37 views
The document provides specifications for butyl acetate including a minimum purity of 99.0% as measured by GC, a specific gravity range of 0.8790 to 0.8850 at 20/20 degrees, and a refractive index range of 1.3920 to 1.3970 at n20/D. It notes that specifications may be updated without notice but product quality will still meet the latest standards, and includes contact information for TCI Europe, TCI Deutschland, and Tokyo Chemical Industry UK.
Report
Share
Report
Share
Download to read offline
Recommended
Cost of environmental chamber 
This document describes environmental test chambers for testing materials under various temperature and humidity conditions. It provides specifications for four chamber models ranging in size from 40*50*40 cm to 60*85*80 cm. The chambers can maintain temperatures from -70°C to +150°C and humidity levels from 20-98% RH. They have high temperature and humidity control accuracy and uniformity. The chambers are made of stainless steel and insulation foam and have various safety and control features.
LVD TEST REPORT
The test report summarizes testing of a LED street light according to IEC 60598-2-3 and EN 60598-2-3 standards. No deviations from technical specifications were found. The light was tested for safety, dust and moisture resistance, insulation, creepage distances, endurance, and heat resistance. All tests were passed, indicating the light meets the requirements.
POLYTRAK 8502 PI Sheet
Polytrak catalyst is a powder Ziegler-Natta catalyst supported on MgCl2 used for polymerizing propylene. It has a typical average particle size of 48-62 μm. When used in a one hour bulk polytest, it produces polypropylene with an activity greater than 36 kg/g/hr, melt flow rate of 3-5 g/10 min, and bulk density of 0.440-0.470 g/ml. The catalyst contains titanium and an internal donor and should be handled under nitrogen and stored below 50°C in sealed drums.
8501 Oxygen Permeation Analyser
The document summarizes an oxygen permeation analyzer called the 8501. It features advanced digital electronics, automated test routines, data logging capabilities, and accuracy traceable to standards. The 8501 offers a cost-effective solution for measuring oxygen transmission rates through permeable films. It features easy operation, with tests taking as short as 20 minutes. The analyzer is compact, precise, and rugged for high volume production facilities.
Portable pH Meter for Process Measurement
For periodic pH measurements or redox measurements, this mobile pH meter is the ideal choice. It combines great durability and intuitive, one-handed operation with the high measurement confidence and diagnostics you expect from METTLER TOLEDO.
Refine current tolerance limits of process factors to sustain the continual p...
The document discusses methods for discovering product-specific process knowledge to improve quality in the foundry industry. It proposes using statistical techniques like principal component analysis and penalty matrices on in-process data to determine optimal tolerance ranges for factors like percentage of carbon, iron, and aluminum. This helps reduce defective castings from 2-3% to below 1% by minimizing deviations from expected results. The methods also align with requirements for risk-based thinking and documenting organizational knowledge in the ISO 9001:2015 standard.
Combustible hydro carbon sensor pt205
The PT205-LEL is a combustible hydrocarbon sensor that uses a catalytic bead sensor to detect combustible vapors from 0-100% LEL. It has a microprocessor-based modular design that provides a 4-20mA output and LED status indicator. The sensor is approved for use in hazardous locations and has a response time of less than 10 seconds for 100% LEL methane gas.
40 rfc 2022.pdf
Mineral Water Bottling Plant, Installation Available. ₹ 5.50 Lakh / Unit ; Mineral Water Bottling Plant. ₹ 40 Lakh / starting.
Steps to Start Mineral Water Plant Business · 1. Know the market opportunity · 2. Certification and License · 3. Good area and locality, This bottling plant is used in numerous industries for solving drinking water issues. Due to the easy installation, our Mineral Water Bottling Plant, A packaged potable water plant filtrates and processes borewell water with the aid of reverse osmosis and packages it into bottles. This bottling plant is used in numerous industries for solving drinking water issues. Due to the easy installation, our Mineral Water Bottling Plant, Mineral Water Process Details Mineral Water Bottling Plant ... World Latest Technologies of Process for Mineral Water (Bottled Water) Production from Different, Mineral water plant requires the water coming from naturally occurring sources like mountain water and spring water. Such water involves minerals that offer drinking water, ... Water Plant, 24 BPM Packaged Drinking Water Plant and Mineral Water Bottle Filling Machine offered by Gajanand Machine Private Limted, Surat, Gujarat.
Recommended
Cost of environmental chamber
This document describes environmental test chambers for testing materials under various temperature and humidity conditions. It provides specifications for four chamber models ranging in size from 40*50*40 cm to 60*85*80 cm. The chambers can maintain temperatures from -70°C to +150°C and humidity levels from 20-98% RH. They have high temperature and humidity control accuracy and uniformity. The chambers are made of stainless steel and insulation foam and have various safety and control features.
LVD TEST REPORT
The test report summarizes testing of a LED street light according to IEC 60598-2-3 and EN 60598-2-3 standards. No deviations from technical specifications were found. The light was tested for safety, dust and moisture resistance, insulation, creepage distances, endurance, and heat resistance. All tests were passed, indicating the light meets the requirements.
POLYTRAK 8502 PI Sheet
Polytrak catalyst is a powder Ziegler-Natta catalyst supported on MgCl2 used for polymerizing propylene. It has a typical average particle size of 48-62 μm. When used in a one hour bulk polytest, it produces polypropylene with an activity greater than 36 kg/g/hr, melt flow rate of 3-5 g/10 min, and bulk density of 0.440-0.470 g/ml. The catalyst contains titanium and an internal donor and should be handled under nitrogen and stored below 50°C in sealed drums.
8501 Oxygen Permeation Analyser
The document summarizes an oxygen permeation analyzer called the 8501. It features advanced digital electronics, automated test routines, data logging capabilities, and accuracy traceable to standards. The 8501 offers a cost-effective solution for measuring oxygen transmission rates through permeable films. It features easy operation, with tests taking as short as 20 minutes. The analyzer is compact, precise, and rugged for high volume production facilities.
Portable pH Meter for Process Measurement
For periodic pH measurements or redox measurements, this mobile pH meter is the ideal choice. It combines great durability and intuitive, one-handed operation with the high measurement confidence and diagnostics you expect from METTLER TOLEDO.
Refine current tolerance limits of process factors to sustain the continual p...
The document discusses methods for discovering product-specific process knowledge to improve quality in the foundry industry. It proposes using statistical techniques like principal component analysis and penalty matrices on in-process data to determine optimal tolerance ranges for factors like percentage of carbon, iron, and aluminum. This helps reduce defective castings from 2-3% to below 1% by minimizing deviations from expected results. The methods also align with requirements for risk-based thinking and documenting organizational knowledge in the ISO 9001:2015 standard.
Combustible hydro carbon sensor pt205
The PT205-LEL is a combustible hydrocarbon sensor that uses a catalytic bead sensor to detect combustible vapors from 0-100% LEL. It has a microprocessor-based modular design that provides a 4-20mA output and LED status indicator. The sensor is approved for use in hazardous locations and has a response time of less than 10 seconds for 100% LEL methane gas.
40 rfc 2022.pdf
Mineral Water Bottling Plant, Installation Available. ₹ 5.50 Lakh / Unit ; Mineral Water Bottling Plant. ₹ 40 Lakh / starting.
Steps to Start Mineral Water Plant Business · 1. Know the market opportunity · 2. Certification and License · 3. Good area and locality, This bottling plant is used in numerous industries for solving drinking water issues. Due to the easy installation, our Mineral Water Bottling Plant, A packaged potable water plant filtrates and processes borewell water with the aid of reverse osmosis and packages it into bottles. This bottling plant is used in numerous industries for solving drinking water issues. Due to the easy installation, our Mineral Water Bottling Plant, Mineral Water Process Details Mineral Water Bottling Plant ... World Latest Technologies of Process for Mineral Water (Bottled Water) Production from Different, Mineral water plant requires the water coming from naturally occurring sources like mountain water and spring water. Such water involves minerals that offer drinking water, ... Water Plant, 24 BPM Packaged Drinking Water Plant and Mineral Water Bottle Filling Machine offered by Gajanand Machine Private Limted, Surat, Gujarat.
Cost audit Report & Record Rules 2014
The document outlines the key changes to the cost audit process and reporting requirements as per the Companies Act 2014. It provides details of the industries that are subject to cost audit and the regulatory authorities. It also summarizes the changes made to the cost audit forms and reporting structure, which is now required to be done based on the 4 digit CETA chapter rather than product group wise. The cost audit report is divided into 4 parts covering general information, cost details, product profitability, and financial reconciliation.
LED Optical Aging Test Instrument
According to IESNA LM-80-2008, LM-82 and TM-21, it will record the lumen for L70, L50 and L30, the software is based on Arrhenius model to calculate the LED life
Cost audit report rules 2014
The document summarizes the key changes to the cost audit process and reporting requirements under the Companies Act of 2014. It outlines 33 industries that are subject to cost audit, and specifies the regulatory authorities and excise codes for each. It also summarizes the new cost audit report format, which is divided into four parts covering general information, cost accounting policies, product details, and profitability analysis. The reporting requires itemization by 4-digit CETA chapter code rather than product group. Two forms - CRA-1 for cost records and CRA-3 for the cost audit report - have replaced the previous forms under the Companies Act of 2011.
Ammo lyt 700 iq ammonium nh4 sensor-wtw
Ammo lyt 700 iq ammonium nh4 sensor-wtw - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
8000 Oxygen Permeation Analysers
The document describes Systech Illinois' range of oxygen permeation analyzers for testing packaging films, bottles, containers, and other materials. The analyzers provide precise measurement of oxygen transmission rates, with measurement ranges from 0.005 cc/m2/day to 432,000 cc/m2/day. They feature modular designs, intuitive software, temperature and humidity control, and various models for testing films, packages, or multiple samples simultaneously.
Tomasetto LPG injectors
The document discusses Tomasetto Achille Spa, an Italian company established in 1982 that designs and manufactures components for LPG and CNG fuel systems. It operates out of a 7,000 square meter plant in Castegnero, Italy, near Venice, and produces multi-valves, reducers, and other products for the automotive CNG and LPG markets. The company focuses on technology, quality, reliability, and customization to meet customer needs and specifications.
Kojic acid dipalmitate coa
This certificate of analysis provides the results of quality testing for a batch of Kojic Acid Dipalmitate produced by Octagon Chemicals Limited. The batch number is 200103 with a manufacturing date of January 22, 2020 and expiration date of January 21, 2022. All test results including identification, melting point, loss on drying, residue on ignition, heavy metals, arsenic, pathogens, and assay were within standards. The batch was deemed to meet the enterprise's requirements for quality.
CMA05MT900-A版承認書(FOR 訊舟)20090615
The document is a product specification sheet for SMD chip common mode chokes. It includes:
1. Product name, specifications, customer information, and contact details.
2. Description of the product shape, size, applications, features, and test equipment.
3. Standard electrical specifications including impedance, DC resistance, current rating, and tolerance.
4. Recommended PCB layout pattern, tape and reel specifications, common mode performance curve, and electrical performance test procedures.
5. Material safety data sheet.
Pocket Chroma Colorimeter
Make traditional laboratory instrument available for the production
on-line quality acceptance, thus greatly improved the efficiency of fluorescent lamp,
CFL, LED.
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...Acmas Technologies Pvt. Ltd.
The Acm- MP-DDS- series economical microprocessor based dissolved oxygen meter are very accurate and
economical DO meters.Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Le price training presentation
This document provides information about Kittiwake, a company that manufactures condition monitoring products for various industrial applications including marine, industrial, renewable energy, offshore, and power. It describes Kittiwake's credentials, product offerings for oil, fuel, and water sampling and testing, online condition monitoring sensors, and acoustic emission monitoring. Guidelines are also provided on setting up an effective onsite oil analysis program.
Case study: Deposition Watch sees buildup inside process pipes
Deposition Watch images and monitors deposits, such as waxes and hard scales inside industrial pipelines and calculates free volume index to indicate how much free space remains in the pipe.
Accurate data offered by the system can be used to optimize pipe cleaning cycle or to control the usages of anti-scaling chemicals. In this case the customer uses the system to monitor calcium carbonate scaling for optimization of pipe cleaning cycles.
Deposition Watch is non-nuclear and doesn't contain any moving parts. The system is available in IECEx/ATEX approved version.
More information at www.rocsole.com
Loctite 420 instant adhesive, 20 g
LOCTITE 420 INSTANT ADHESIVE is a general purpose cyanoacrylate wicking type plastic bonder. Mil Spec: Mil-A-46050C Type II Class I. Commercial Item Description A-A-3097: Type II Class 1.
IP67 Test Report
This test report provides the results of testing an electric sealing box to IEC 60529 standards for ingress protection ratings. No deviations from the technical specifications were found. The item was tested for an IP67 rating, protecting against dust ingress and water immersion to 1 meter for 30 minutes. All clauses and tests for the IP67 rating were passed. In summary, the electric sealing box was found to meet the requirements for an IP67 ingress protection rating according to IEC 60529.
English construction regulatory information request censp 02
The document is a regulatory information request from W.R. Grace & Co. for the product CENSPERSE RT 02, distributed by temcon solutions GmbH. It requests information on the product's composition, chemical inventory status, transportation details, additives/contaminants, and EU REACH compliance. The product contains 68-04-3 sodium 2-hydroxy-1,2,3-propane tricarboxylate (68-80%) and 7631-86-9 silicon dioxide (0-20%). The distributor, Michael Kassautzki of temcon solutions GmbH, certified the information provided is accurate to the best of his knowledge.
Optimizing chemical process through robust taguchi design a case study
This document summarizes a study that used Taguchi design of experiments to optimize a chemical process (XYZ Ltd.) to maximize the purity of chemical X. The study identified four controllable factors (additive quantity, reaction temperature, pH, chemical quantity) and one noise factor (room temperature) to investigate. An L9 orthogonal array was used to conduct 27 experiments, and purity percentage was measured. Analysis of variance identified three significant controllable factors. Optimal settings were identified to maximize either the average purity, minimize variability in purity, or minimize the standard deviation based on customer priorities. Validation trials confirmed the optimal settings achieved the target purity optimization.
2015 GS Caltex Solvent Catalog
GS Caltex has one of the world's largest aromatics production capacities as a single-site factory. It produces various aromatic chemicals including benzene, toluene, xylene, and paraxylene through its petroleum refining and petrochemical processes. GS Caltex will continue strengthening its competitiveness to become a global energy leader by expanding its facilities and product lines.
Carbon-dioxide-Detector.pdf
We supply carbon dioxide detectors which is a portable unit with wide measuring ranges, equipped with sound and adjustable alarms.
Led lumen-maintenance-and-life-test-system
The document is a test report from Lisun Electronics evaluating the lumen maintenance and color stability of white LED samples from OSRAM Lighting over 6,000 hours of operation. Key findings include:
- The samples maintained over 96% of their initial lumen output after 6,000 hours and were predicted to reach L70 and L50 ratings of over 33,000 hours based on TM-21 projections.
- Chromaticity shift was small, within a du'v' range of -0.0001 to 0.0018 over the test period.
- No sample failures occurred and performance was stable under the test conditions of 55°C case temperature and 6,000 hour duration.
More Related Content
Similar to Spec 20180405054057
Cost audit Report & Record Rules 2014
The document outlines the key changes to the cost audit process and reporting requirements as per the Companies Act 2014. It provides details of the industries that are subject to cost audit and the regulatory authorities. It also summarizes the changes made to the cost audit forms and reporting structure, which is now required to be done based on the 4 digit CETA chapter rather than product group wise. The cost audit report is divided into 4 parts covering general information, cost details, product profitability, and financial reconciliation.
LED Optical Aging Test Instrument
According to IESNA LM-80-2008, LM-82 and TM-21, it will record the lumen for L70, L50 and L30, the software is based on Arrhenius model to calculate the LED life
Cost audit report rules 2014
The document summarizes the key changes to the cost audit process and reporting requirements under the Companies Act of 2014. It outlines 33 industries that are subject to cost audit, and specifies the regulatory authorities and excise codes for each. It also summarizes the new cost audit report format, which is divided into four parts covering general information, cost accounting policies, product details, and profitability analysis. The reporting requires itemization by 4-digit CETA chapter code rather than product group. Two forms - CRA-1 for cost records and CRA-3 for the cost audit report - have replaced the previous forms under the Companies Act of 2011.
Ammo lyt 700 iq ammonium nh4 sensor-wtw
Ammo lyt 700 iq ammonium nh4 sensor-wtw - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
8000 Oxygen Permeation Analysers
The document describes Systech Illinois' range of oxygen permeation analyzers for testing packaging films, bottles, containers, and other materials. The analyzers provide precise measurement of oxygen transmission rates, with measurement ranges from 0.005 cc/m2/day to 432,000 cc/m2/day. They feature modular designs, intuitive software, temperature and humidity control, and various models for testing films, packages, or multiple samples simultaneously.
Tomasetto LPG injectors
The document discusses Tomasetto Achille Spa, an Italian company established in 1982 that designs and manufactures components for LPG and CNG fuel systems. It operates out of a 7,000 square meter plant in Castegnero, Italy, near Venice, and produces multi-valves, reducers, and other products for the automotive CNG and LPG markets. The company focuses on technology, quality, reliability, and customization to meet customer needs and specifications.
Kojic acid dipalmitate coa
This certificate of analysis provides the results of quality testing for a batch of Kojic Acid Dipalmitate produced by Octagon Chemicals Limited. The batch number is 200103 with a manufacturing date of January 22, 2020 and expiration date of January 21, 2022. All test results including identification, melting point, loss on drying, residue on ignition, heavy metals, arsenic, pathogens, and assay were within standards. The batch was deemed to meet the enterprise's requirements for quality.
CMA05MT900-A版承認書(FOR 訊舟)20090615
The document is a product specification sheet for SMD chip common mode chokes. It includes:
1. Product name, specifications, customer information, and contact details.
2. Description of the product shape, size, applications, features, and test equipment.
3. Standard electrical specifications including impedance, DC resistance, current rating, and tolerance.
4. Recommended PCB layout pattern, tape and reel specifications, common mode performance curve, and electrical performance test procedures.
5. Material safety data sheet.
Pocket Chroma Colorimeter
Make traditional laboratory instrument available for the production
on-line quality acceptance, thus greatly improved the efficiency of fluorescent lamp,
CFL, LED.
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...Acmas Technologies Pvt. Ltd.
The Acm- MP-DDS- series economical microprocessor based dissolved oxygen meter are very accurate and
economical DO meters.Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Le price training presentation
This document provides information about Kittiwake, a company that manufactures condition monitoring products for various industrial applications including marine, industrial, renewable energy, offshore, and power. It describes Kittiwake's credentials, product offerings for oil, fuel, and water sampling and testing, online condition monitoring sensors, and acoustic emission monitoring. Guidelines are also provided on setting up an effective onsite oil analysis program.
Case study: Deposition Watch sees buildup inside process pipes
Deposition Watch images and monitors deposits, such as waxes and hard scales inside industrial pipelines and calculates free volume index to indicate how much free space remains in the pipe.
Accurate data offered by the system can be used to optimize pipe cleaning cycle or to control the usages of anti-scaling chemicals. In this case the customer uses the system to monitor calcium carbonate scaling for optimization of pipe cleaning cycles.
Deposition Watch is non-nuclear and doesn't contain any moving parts. The system is available in IECEx/ATEX approved version.
More information at www.rocsole.com
Loctite 420 instant adhesive, 20 g
LOCTITE 420 INSTANT ADHESIVE is a general purpose cyanoacrylate wicking type plastic bonder. Mil Spec: Mil-A-46050C Type II Class I. Commercial Item Description A-A-3097: Type II Class 1.
IP67 Test Report
This test report provides the results of testing an electric sealing box to IEC 60529 standards for ingress protection ratings. No deviations from the technical specifications were found. The item was tested for an IP67 rating, protecting against dust ingress and water immersion to 1 meter for 30 minutes. All clauses and tests for the IP67 rating were passed. In summary, the electric sealing box was found to meet the requirements for an IP67 ingress protection rating according to IEC 60529.
English construction regulatory information request censp 02
The document is a regulatory information request from W.R. Grace & Co. for the product CENSPERSE RT 02, distributed by temcon solutions GmbH. It requests information on the product's composition, chemical inventory status, transportation details, additives/contaminants, and EU REACH compliance. The product contains 68-04-3 sodium 2-hydroxy-1,2,3-propane tricarboxylate (68-80%) and 7631-86-9 silicon dioxide (0-20%). The distributor, Michael Kassautzki of temcon solutions GmbH, certified the information provided is accurate to the best of his knowledge.
Optimizing chemical process through robust taguchi design a case study
This document summarizes a study that used Taguchi design of experiments to optimize a chemical process (XYZ Ltd.) to maximize the purity of chemical X. The study identified four controllable factors (additive quantity, reaction temperature, pH, chemical quantity) and one noise factor (room temperature) to investigate. An L9 orthogonal array was used to conduct 27 experiments, and purity percentage was measured. Analysis of variance identified three significant controllable factors. Optimal settings were identified to maximize either the average purity, minimize variability in purity, or minimize the standard deviation based on customer priorities. Validation trials confirmed the optimal settings achieved the target purity optimization.
2015 GS Caltex Solvent Catalog
GS Caltex has one of the world's largest aromatics production capacities as a single-site factory. It produces various aromatic chemicals including benzene, toluene, xylene, and paraxylene through its petroleum refining and petrochemical processes. GS Caltex will continue strengthening its competitiveness to become a global energy leader by expanding its facilities and product lines.
Carbon-dioxide-Detector.pdf
We supply carbon dioxide detectors which is a portable unit with wide measuring ranges, equipped with sound and adjustable alarms.
Led lumen-maintenance-and-life-test-system
The document is a test report from Lisun Electronics evaluating the lumen maintenance and color stability of white LED samples from OSRAM Lighting over 6,000 hours of operation. Key findings include:
- The samples maintained over 96% of their initial lumen output after 6,000 hours and were predicted to reach L70 and L50 ratings of over 33,000 hours based on TM-21 projections.
- Chromaticity shift was small, within a du'v' range of -0.0001 to 0.0018 over the test period.
- No sample failures occurred and performance was stable under the test conditions of 55°C case temperature and 6,000 hour duration.
Similar to Spec 20180405054057 (20)
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...
Economical Microprocessor Based Dissolved Oxygen Meter by ACMAS Technologies ...
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
Case study: Deposition Watch sees buildup inside process pipes
Case study: Deposition Watch sees buildup inside process pipes
English construction regulatory information request censp 02
English construction regulatory information request censp 02
Optimizing chemical process through robust taguchi design a case study
Optimizing chemical process through robust taguchi design a case study
Recently uploaded
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
Recently uploaded (20)
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support Use cases solutions development and implementation.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Spec 20180405054057
- 1. Specification Apr 5, 2018 (JST) TOKYO CHEMICAL INDUSTRY CO.,LTD. 4-10-1 Nihonbashi-Honcho, Chuo-ku, Tokyo 103-0023 Japan Chemical Name: Butyl Acetate Product Number: A0024 CAS RN: 123-86-4 Tests Specifications Purity(GC) min. 99.0 % Specific gravity (20/20) 0.8790 to 0.8850 Refractive index n20/D 1.3920 to 1.3970 The contents of the specifications are subject to change without advance notice. The specification values displayed here are the most up to date values. There may be cases where the product labels display a different specification, however, the product quality still meets the latest specification. Customer service: TCI EUROPE N.V. Tel: +32-3-735-0700 Fax: +32-3-735-0701 E-mail: Sales-EU@TCIchemicals.com TCI Deutschland GmbH Tel: +49 6196 64053-00 Fax: +49 6196 64053-01 E-mail: Sales-DE@TCIchemicals.com Tokyo Chemical Industry UK Ltd Tel: +44 1865 78 45 60 Fax: +44 1865 78 45 61 E-mail: Sales-UK@TCIchemicals.com