Bộ nguồn tổ ong 24V Schneider Electric , Beeteco.comBeeteco
Bộ nguồn tổ ong 24V Schneider Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Bộ nguồn tổ ong 24V Schneider Electric , Beeteco.comBeeteco
Bộ nguồn tổ ong 24V Schneider Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
White Paper Mold-ID - Mold Management for Injection Molding with RFIDManfred Muenzl
Tools are subject to wear and tear and must be maintained and serviced on a regular base.
Inspection of the tools is often dependent on the experience values of individual employees, handwritten notes or planned figures in the ERP system that are not available to everyone or that are not monitored.
In many cases the maintenance or inspection is only carried out when the produced parts no longer fulfill the required quality standards or if the mold fails at its service.
That causes unplanned downtime of the machine and is not acceptable.
Clamping Force Monitoring for Injection Molding MachinesManfred Muenzl
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
This document is a PowerPoint presentation about the topical approach in social studies. It introduces the topical approach as selecting topics suitable for students' age, ability, and interest and covering each topic fully when first introduced. Specific topics are taken as central themes. Merits include helping students understand facts in context and imparting integrated knowledge without overload. The approach can be adapted for students. Demerits are that it is difficult to adopt and requires competent, resourceful teachers. The presentation was created by Lekshmi M.S. for her social science optional course.
The document discusses high durability cables for welding applications. It describes several cable types including silicone cables, thermoplastic cables, fiberglass sleeved cables, PTFE cables, and stainless steel tube cables. Each cable type is detailed in terms of materials used, performance characteristics like weld slag and flame resistance, and results from durability testing involving tens of thousands of weld cycles. Additional products are presented like protective covers, mounting accessories, silicone tubing and sheeting for cable protection, and inductive sensors designed for welding environments.
This document outlines the content for a course on pavement design called CEE320 at Washington State University. It covers topics such as the purpose and significance of pavements, types of pavement materials and structures, design methods, and an example design problem. The course will discuss flexible and rigid pavements, parameters for pavement design, and use the AASHTO and WSDOT design methods. References for further information are also provided.
Easy step to Tool- & Lifecycle Management for plastic injection moldsManfred Muenzl
The document discusses a tool called Mold-ID that aims to increase transparency and process optimization in production. Currently, tool inspection is dependent on employee experience and notes, and maintenance is often only done after quality issues occur. Mold-ID addresses this by automatically counting production cycles, documenting tool information, and visualizing tool status to enable preventative maintenance and reduce unplanned downtime.
Entreprise connectée, sociale et collaborative. Tendre vers une relation clie...Fabien Fournillon
Présentation de thèse professionnelle. Comment optimiser les interactions sociales entre communautés internes et externes de l'entreprise afin d'optimiser la relation client ? Vous y trouverez des bonnes pratiques et une matrices vous permettant d'évaluer le degré de maturité social de votre entreprise ou organisation. J'aborde également dans ce support de nombreux points relatifs au Social CRM, la circulation des données, l'architecture d'un Système d'lnformation "idéal" qui intègre ce nouveau paradigme de la relation client. Vous pouvez obtenir l'ensemble de mon travail de recherche en vous rendant sur la page de mon blog : http://nouveaumarketeur.fr/category/these/ ainsi que sur mon blog dans lequel je traite des nouveaux enjeux de la profession avec un angle décalé. N'hésitez pas à me suivre sur Twitter @FFournillon et vous rendre également sur la page Facebook du blog Le Nouveau Marketeur : http://www.facebook.com/LeNouveauMarketeur dans laquelle je partage des sujets d'actualité que vous ne retrouverez pas nécessairement sur mon blog. Bonne lecture et n'hésitez pas à me contacter !
This document discusses different types of pavements, including flexible, rigid, and semi-rigid pavements. It describes key design factors for both flexible and rigid pavements such as traffic load, pavement materials, subgrade strength assessed by CBR value, and design life. The document emphasizes the importance of pavement design, noting it accounts for nearly half the road construction cost. Good pavements are important as they can easily bear and transmit loads.
The document provides guidance on ramp safety for vehicles operating in airport areas. It outlines definitions for different surface areas like movement areas, maneuvering areas, and aprons. It discusses authority requirements, speed limits, right of way rules, and hazards to watch out for around aircraft like jet blast, rotating propellers, and taxiing procedures. Safety protocols are presented for various weather conditions, markings, and prohibited activities like smoking or alcohol use while operating vehicles on the ramp.
Using infographics in your content strategy Cameron Pegg
An infographic is truly worth a 1000 words. Learn about the different kinds of infographics and how you can incorporate them into your content strategy.
VKPAK, started from labeling machine manufacturer, also invested and shared several factories from filling machine, capping machine and packing machine. We are providing quality packing solutions for bottle filling and packing in the industries of home care and personal care , foodstuff, agrochemical , chemical and lubricate oil for liquids, cream/ointment, fluid and half-fluid, powders, and granules products.
Integrating R&D, manufacture, marketing ,and service in one, we provide complete production line from bottle feeding, washing, filling, capping/sealing, labeling , cartooning.
Our goal is to make a liquid filler that works well and is reliable. We want to help our clients save money, be more productive, and use less packaging material. We want to be known as experts in this area, and we are a growing company that can make special machines to fill liquid bottles. We always invest in new ideas to make our products even better. We share our success with our customers and employees. We want to sell our machines all over the world and work with others.
We offer the machines and the lines with great impact for your product quality and productivity.
We are sincerely looking forward for your contact.
Our company is a supplier of LED connectors and wiring harness solutions, which has been established for more than 20 years.
We have more than 20 listed display manufacturers long-term cooperation, We have a sound management system and the certification required for all target markets, such as CE UL
VDE ROHS . . . . . .
White Paper Mold-ID - Mold Management for Injection Molding with RFIDManfred Muenzl
Tools are subject to wear and tear and must be maintained and serviced on a regular base.
Inspection of the tools is often dependent on the experience values of individual employees, handwritten notes or planned figures in the ERP system that are not available to everyone or that are not monitored.
In many cases the maintenance or inspection is only carried out when the produced parts no longer fulfill the required quality standards or if the mold fails at its service.
That causes unplanned downtime of the machine and is not acceptable.
Clamping Force Monitoring for Injection Molding MachinesManfred Muenzl
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
This document is a PowerPoint presentation about the topical approach in social studies. It introduces the topical approach as selecting topics suitable for students' age, ability, and interest and covering each topic fully when first introduced. Specific topics are taken as central themes. Merits include helping students understand facts in context and imparting integrated knowledge without overload. The approach can be adapted for students. Demerits are that it is difficult to adopt and requires competent, resourceful teachers. The presentation was created by Lekshmi M.S. for her social science optional course.
The document discusses high durability cables for welding applications. It describes several cable types including silicone cables, thermoplastic cables, fiberglass sleeved cables, PTFE cables, and stainless steel tube cables. Each cable type is detailed in terms of materials used, performance characteristics like weld slag and flame resistance, and results from durability testing involving tens of thousands of weld cycles. Additional products are presented like protective covers, mounting accessories, silicone tubing and sheeting for cable protection, and inductive sensors designed for welding environments.
This document outlines the content for a course on pavement design called CEE320 at Washington State University. It covers topics such as the purpose and significance of pavements, types of pavement materials and structures, design methods, and an example design problem. The course will discuss flexible and rigid pavements, parameters for pavement design, and use the AASHTO and WSDOT design methods. References for further information are also provided.
Easy step to Tool- & Lifecycle Management for plastic injection moldsManfred Muenzl
The document discusses a tool called Mold-ID that aims to increase transparency and process optimization in production. Currently, tool inspection is dependent on employee experience and notes, and maintenance is often only done after quality issues occur. Mold-ID addresses this by automatically counting production cycles, documenting tool information, and visualizing tool status to enable preventative maintenance and reduce unplanned downtime.
Entreprise connectée, sociale et collaborative. Tendre vers une relation clie...Fabien Fournillon
Présentation de thèse professionnelle. Comment optimiser les interactions sociales entre communautés internes et externes de l'entreprise afin d'optimiser la relation client ? Vous y trouverez des bonnes pratiques et une matrices vous permettant d'évaluer le degré de maturité social de votre entreprise ou organisation. J'aborde également dans ce support de nombreux points relatifs au Social CRM, la circulation des données, l'architecture d'un Système d'lnformation "idéal" qui intègre ce nouveau paradigme de la relation client. Vous pouvez obtenir l'ensemble de mon travail de recherche en vous rendant sur la page de mon blog : http://nouveaumarketeur.fr/category/these/ ainsi que sur mon blog dans lequel je traite des nouveaux enjeux de la profession avec un angle décalé. N'hésitez pas à me suivre sur Twitter @FFournillon et vous rendre également sur la page Facebook du blog Le Nouveau Marketeur : http://www.facebook.com/LeNouveauMarketeur dans laquelle je partage des sujets d'actualité que vous ne retrouverez pas nécessairement sur mon blog. Bonne lecture et n'hésitez pas à me contacter !
This document discusses different types of pavements, including flexible, rigid, and semi-rigid pavements. It describes key design factors for both flexible and rigid pavements such as traffic load, pavement materials, subgrade strength assessed by CBR value, and design life. The document emphasizes the importance of pavement design, noting it accounts for nearly half the road construction cost. Good pavements are important as they can easily bear and transmit loads.
The document provides guidance on ramp safety for vehicles operating in airport areas. It outlines definitions for different surface areas like movement areas, maneuvering areas, and aprons. It discusses authority requirements, speed limits, right of way rules, and hazards to watch out for around aircraft like jet blast, rotating propellers, and taxiing procedures. Safety protocols are presented for various weather conditions, markings, and prohibited activities like smoking or alcohol use while operating vehicles on the ramp.
Using infographics in your content strategy Cameron Pegg
An infographic is truly worth a 1000 words. Learn about the different kinds of infographics and how you can incorporate them into your content strategy.
VKPAK, started from labeling machine manufacturer, also invested and shared several factories from filling machine, capping machine and packing machine. We are providing quality packing solutions for bottle filling and packing in the industries of home care and personal care , foodstuff, agrochemical , chemical and lubricate oil for liquids, cream/ointment, fluid and half-fluid, powders, and granules products.
Integrating R&D, manufacture, marketing ,and service in one, we provide complete production line from bottle feeding, washing, filling, capping/sealing, labeling , cartooning.
Our goal is to make a liquid filler that works well and is reliable. We want to help our clients save money, be more productive, and use less packaging material. We want to be known as experts in this area, and we are a growing company that can make special machines to fill liquid bottles. We always invest in new ideas to make our products even better. We share our success with our customers and employees. We want to sell our machines all over the world and work with others.
We offer the machines and the lines with great impact for your product quality and productivity.
We are sincerely looking forward for your contact.
Our company is a supplier of LED connectors and wiring harness solutions, which has been established for more than 20 years.
We have more than 20 listed display manufacturers long-term cooperation, We have a sound management system and the certification required for all target markets, such as CE UL
VDE ROHS . . . . . .
Longxin Laser Teconology Founded in 2008, It is a national high-tech enterprise integrating R&D, production and sales of metal pipe forming and cutting intelligent equipment. We are committed to Become a leading privider of intelligent laser automation solution.
Our products are widely used in construction machinery, auto parts, decoration engineering, kitchen and bathroom hardware, smart home, medical equipment and many other industries. So far, it has served more than 3,000 global enterprises.
www.longxinlaser.com
OLYM Metal Product Co., Ltd is the leading investment casting manufacture in China, founded in 2001,We are a lost wax casting company, producing all kinds of investment casting parts, Lost wax investment casting process parts.precision casting parts. We are the leading lost wax casting supplier investment casting Itd in China.
Our metal casting, investment & precision casting is in good quality among China investment casting factories. we chinese casting, casting parts obtain good repute in investment casting market at home and abroad, and OLYM investment casting corporation use silica sol lost wax casting process to produce precision metal casting with materials of carbon steel,alloy steel,stainless steel,Mn steel,lost foam parts will be designed by our engineers in China, include different sizes of investment casting parts, can you check ? some of investment casting parts in our website,but most of them not,you know we can not put all the metal casting products on it .
Our investment casting corporation is one of the top innovators among casting factories in China, castings are exported to America,Canada,England (Britain,United Kingdom),France,Germany,Australia South Africa Holland,Spain ,Russian ,Japan ,Switzerland market...! Our products have high quality with the users consistent highly praise.
Core Competitiveness:Our professional team will help you optimizing whole solutions for your design.
Communication Skills: We are able to communicate technical information with you in English.
Excellent Service: Welcome to visit our factory, we are willing to pick up at the airport or elsewhere.
Timely Delivery Time: Our PMC department will work out manufacturing plan with you to ensure ensure efficient production at a desired quantity, quality and timeframe
As a China investment casting parts Supplier, we can produce investment casting parts according to your requirements.
http://www.castch.com
Skype:olymcast2001
Whatsapp/wechat/mobile:8613822621994
Email:jessie@olymcast.com
27. 防爆型微脉冲位移传感器
压力达到600bar,可靠的安全检测
美国和加拿大
微脉冲传感器J-DEXC专门开发用于美国和加拿大。J-DEXC系统完
全满足美国管理局的要求并且实现简易的维护。J-DEXC包含了坚固
的防爆外壳和易于更换维护的电气组件。
应用:
■■液压式和气动式驱动阀;
■■压缩机的离合器监控;
■■液位检测;
■■液位监控;
■■危险区域内的液压缸移动精密位置检测;
Class I, Division 1, Groups A, B, C, and D
Class II, Division 1, Groups E, F, and G; Class III
T6 Ta=65°C, T5 Ta=80°C Type 4X/6P; IP 68
Class I, Zone 1 AEx d IIC T6 Ta=65°C, T5 Ta=80°C
Class I, Zone 1 Ex d IIC T6 Ta=65°C, T5 Ta=80°C
SIRA 11ATEX1104X
IECEx SIR 11.0048X
C US
11-2411253X
II 1/2GD
Ex d IIC T6/T5 Ga/Gb Ta +65°C (T6) +80°C (T5)
Ex t IIIC T85/T100°C Da IP 68 Ta +65°C (T85) +80°C (T100)
0518
测量范围在25-4000mm之间
具有防爆功能的BTL微脉冲传感器在钢铁工业苛刻的环境中表现非
常出色。该非接触式系统在欧洲和其它国家都已有很好的应用。
欧洲:防爆等级’d’-防爆封装
传感器标识Ex d IIB+H2 T6 Ga/Gb满足电气设备在潜在爆炸区域的
要求。相关的安全规定必须遵守(EX-RL,EN60079-14,EN60079-1).
传感器符合设备组II 1/2G标准,标识Ex d IIB+H2 T6,满足关于在含
有爆炸气体的环境中使用电气设备的要求。传感器符合设备组II 3D
标准,标识Ex Td IP67 T85℃,满足关于在含易燃性A类气体的22区
中使用电气设备的要求。
Zone 1
partition
Zone 0 ATEX
IEC
IECEx
n www.balluff.com 27
33. IP 20电源-常规数据
■■最高使用效率可达92%;
■■极低的热量产生和流失;
■■提升系统效率;
■■3级状态指示;
■■功率提升(150%/4s);
■■结构极其紧凑;
■■更有效的利用电源模块
■■系统无需过量功率储备
■■带过载保护功能
■■无需定期维护和维修
■■更高的生产率
■■达到寿命后更换电源
■■使用寿命15年(在80%载荷工况,40℃条件下)
■■封装结构确保承受高冲击和震动载荷
■■设有常开报警触点
智能电源
满足系统最大系统使用性
巴鲁夫为本土化工厂高效运行研发/生产智能电源,是高功效连续工
作的理想产品。电源的工作状态可通过动态光学显示器呈现(纹波):
可显示负载水平、应力水平和使用期限。若使用期限LED指示灯转
为红色,则暗示您需更换电源模块。
状态监控可以指示出30%-50%的储存余量防止过载,可避免不必要
的故障并减少过载维护。
5A电流输出产品有一款紧凑的,部分封闭的外壳结构并且能够承受
高冲击和震动载荷,这是得它成为钢铁生产的理想选择。
负载水平
生命周期
压力水平
也能提供
IP67
等级电源
也能提供
IP67
等级电源
输出电流/功率/电压5A/120 W/24 V DC(SELV) 10 A/240 W/24 V DC (SELV)
输入电压100...240 V AC, 单相 100...240 V AC,单相
订购代号 BAE00EK BAE00EU
订货编码BAE PS-XA-1W-24-050-013 BAE PS-XA-1W-24-100-014
输入电压范围 90...264 V AC/135...340 V DC 90...264 V AC/135...340 V DC
峰值电流1.14 at 230 V AC/2,1 A at 110 V AC 2.11 at 230 V AC/4.4 A at 110 V AC
频率范围48...62 Hz 48...62 Hz
输入电阻6.3 A/250 V AC internal 6.3 A/250 V AC internal
电压范围 22...28 V DC 22...28 V DC
max.最大温度漂移 ±0.03 %/°C 0.03 %/°C
滞留时间> 150 ms at 230 V AC/> 25 ms at 115 V AC > 120 ms at 230 V AC/> 15 ms at 115 V AC
状态指示 压力水平,生命周期,负载水平压力水平,生命周期,负载水平
电源升压 150 % for 4 s 150 % for 4 s
效率 高功效,典型值>89% 高功效,典型值>91%
响应正向特性正向特性
环境/粗存温度–25...+70°C/–40...+80°C –25...+70°C /–40...+80°C
安装 DIN导轨安装 DIN导轨安装
并行模式Yes(带外部二极管) Yes(带外部二极管)
防护等级符合IEC 60529 IP20 IP20
额定参数曲线 –2.5 %/°C above +60 °C –2.5 %/°C above +60 °C
冷却 自然对流自然对流
外壳材质 金属,部分封装金属,部分封装
生命周期(80%负载,40°C) 15 years 15 years
保质期 2 years 2 years
认证 CE CE
n www.balluff.com 33