Solution The basic users of financial statements and the .pdf
•
0 likes•2 views
Solution : The basic users of financial statements and the way they use them are given below: 1st Investors: Investors use financial statements to know the risk they are taking by remain invested in the company and returns they are going to get for the risk they have taken. 2nd Lenders: Lenders use financial statement to know the ability of the company to pay interest and financial health of the company to provide further loans to the company. 3rd Creditors/Suppliers: Suppliers use financial statements to determine whether their debtor is able to pay due amount in time and profitability of the company to decide the terms of futures transactions to be done. 4th Owners or management : Management uses financial statements to make financial or operational decision for business . 5th Governments : Governments uses financial statement to know the activities of the company are appropriate for general public at large and whether pay taxes or not and law compliant or not. 6th Employees: Employees uses financial statement to know the stability & profitability of their employer business to know the value of stock options if any they get from their employer and their salary and job stability too. 7th Rating agencies: Rating agencies uses financial statement to do credit rating of the company or its securities. 8th Unions : Unions uses financial statements to know the ability of the company to pay compensation or other benefits to the members of their unions. Please feel free to ask if anything about above solution in comment section of the question..
Report
Share
Report
Share
Download to read offline
Recommended
Are there any other parties, aside from shareholders, who have a leg.pdf
Are there any other parties, aside from shareholders, who have a legitimate interest in a
company’s financial performance? What makes their interest legitimate?
Solution
Parties interested in the company’s financial performance are as listed below
1. Investors And Lenders
Investors and lenders are interested to know the solvency position of an organization. They
analyze the financial statement position to know about the safety of their investment and ability
to pay interest and repayment of principle amount on due date.
2. Creditors
Creditors are interested in analyzing the financial statements in order to know the short term
liquidity position of an organization. Creditors analyse the financial statement to know either the
organization is enable to pay the amount of short term liabilities on due date.
3. Management
Management is interested to analyze the financial statement for measuring the effectiveness of
its policies and decisions.It analyze the financial statements to know short term and long term
solvency position,profitability,liquidity position and return on investment from the business.
4.Government
Government is interested to analyze the financial position in determining the amount of tax
liability. It also helps for formulating effective plans and policies for economic growth..
Who are stakeholders Define who they are and then please share what.pdf
Who are stakeholders? Define who they are and then please share what particular interest each of
these stakeholders have in the information shared on the income statement, retained earnings
statement, balance sheet and statement of cash flows. How do we analyze if a company is
healthy or not?
Solution
Stakeholders are those persons or group of persons who have a interest in the company. The
Interest that they have may be financial or non financial, such as an employee has a financial
interest but customers have non-financial interest. Stakeholders are concerned about the working
of a company. Stakeholders are of two types
Various Types of Stakeholders are as follows:-
Different stakeholders have different interests in the company. Various Stakeholders and their
Interests are given below.
1.Customers. Customers have a stake in the goods of the company. Customers need to know that
company is making progress; it increases their confidence in using company’s products. All a
Customer need is Good a quality product with future care. A customer can understand from
Income statements of a company that whether companies do any research expenses to make their
product better for consumption.
2. Employees. Employees wants to see what company pays to them as a compensation for their
hard work. Companies Value added statements show the percentage of revenue distributed to
employees of company. Employees are also concerned about their job security. A profit making
company is suppose to give a satisfaction to employee that he has a good future in company.
3.Government. Government Collects takes which can be ascertained by reviewing Income
statement. Moreover companies help government by providing employment to millions of
people. Government has interest in knowing that companies prepare their financial statements
truthfully and frauds like Enron are not done.
4. Stock Holders. Stock Holders are basically owners of a company, They take major decisions
in working of a company. Results shown by income statements, Balance sheets and cash Flow
Statements help them take future decisions with precision.
5. Society. Society is also concerned about the working of business organizations. They have a
stake in Corporate Social Responsibility policies of a company. Whether company is taking
necessary steps to minimize pollution of water, air, or total environment as a whole. The
employment rate is another example of society’s stake in businesses.
6. Suppliers. Suppliers are Concerned about that cash position of company. The Current ratio of
Company. They supply Inventory so they need to know whether company is able to pay their
dues in time. Cash Flow statements show a supplier the position of cash of a company.
7. Creditors. Creditors are concerned about the payment of their dues.
8. Lenders. Lenders such as Bond Holders or Preference stock holders are concerned about the
efficient of use of their money and the return on their money. No one wants to lend his money to
a c.
Who are some other individuals who might want to use the informa.pdf
Who are some other individuals who might want to use the information in the financial
statements
Who are some other individuals who might want to use the information in the financial
statements
Who are some other individuals who might want to use the information in the financial
statements
Solution
Some Other Individuals who might use the information in financial statements
1) Suppliers - Suppliers are interested in the information of financial Statements. Suppliers get to
know about solvency and liquidity of company to pay its short term obligations.
2) Employees- Employees use the financial statement information to analyse about the
company\'s ability to pay salary and benefits. Others reasons of using financial statement
information are career development, Financial performance.
3) Customers - Customers use the financial statement information for assessing the company
expansion possibilities, its stability of operations, Its compliances review, for investment
decisions.
Internal.docRunning head Accounting information 1Acco.docx
Internal.doc
Running head: Accounting information
1
Accounting information
2
Accounting information
Student Name
University Name
Picket, n.d. defines internal controls as mechanisms to ensure objectives are achieved. Good controls encourage efficiency, compliance with laws and regulations, sound information, and seek to eliminate fraud and abuse. Internal control is also a process designed to provide assurance regarding the achievement of objectives in the effectiveness and efficiency of operations, reliability and internal and external reporting, and compliance with applicable laws and regulations and internal policies.
Everyone in the organization has some role to play in the organization’s internal control system. The board of directors is responsible for the company’s system of internal control and it sets appropriate policies on internal control and seek regular assurance to ensure that the system of internal control is effective in managing risks in the manner which it has approved. It is also the role of the management to implement board policies on risk and control and all the employees of an organization have some responsibility for internal control as part of their accountability for achieving objectives. Management also needs to review the effectiveness of internal control by forming its own view on effectiveness after due and careful enquiry based on the information and assurances provided to it.
A few examples of internal control activities are as follows: (1) Tracking of major agency achievements and comparing these to the plans, goals and established objectives by the management. (2) Establishing physical control to secure and safeguard vulnerable assets. (3) Use a variety of control activities in information processing. (4) There should be a proper execution of transactions by making sure they are authorized and executed only by persons
acting within the scope of their authority. (5) Segregate the key duties and responsibilities to reduce the risk of error or fraud. (6) Appropriate documentation of transactions and other
significant events and they should be readily available for examination. (7) Establish finance committee to spearhead planning and monitoring of financial activities and reporting. (8) Design an effective organizational structure that takes into account the culture of the organization which is critical for effective financial management. (9) Effective management controls which includes methods of financial planning and budgeting and reporting of actual results and follow-up of variances between budgeted and actual amounts.
There are two groups of users of accounting information: internal users and external users. The internal users are the company managers who use the accounting information to decide how to plan and control operations on a daily and long-term basis while the external users are the existing or the potential investors, creditors, analysts, financial advise.
Horngrens Accounting Global Edition 10th Edition Nobles Solutions Manual
Full download : http://alibabadownload.com/product/horngrens-accounting-global-edition-10th-edition-nobles-solutions-manual/
Horngrens Accounting Global Edition 10th Edition Nobles Solutions Manual
Recommended
Are there any other parties, aside from shareholders, who have a leg.pdf
Are there any other parties, aside from shareholders, who have a legitimate interest in a
company’s financial performance? What makes their interest legitimate?
Solution
Parties interested in the company’s financial performance are as listed below
1. Investors And Lenders
Investors and lenders are interested to know the solvency position of an organization. They
analyze the financial statement position to know about the safety of their investment and ability
to pay interest and repayment of principle amount on due date.
2. Creditors
Creditors are interested in analyzing the financial statements in order to know the short term
liquidity position of an organization. Creditors analyse the financial statement to know either the
organization is enable to pay the amount of short term liabilities on due date.
3. Management
Management is interested to analyze the financial statement for measuring the effectiveness of
its policies and decisions.It analyze the financial statements to know short term and long term
solvency position,profitability,liquidity position and return on investment from the business.
4.Government
Government is interested to analyze the financial position in determining the amount of tax
liability. It also helps for formulating effective plans and policies for economic growth..
Who are stakeholders Define who they are and then please share what.pdf
Who are stakeholders? Define who they are and then please share what particular interest each of
these stakeholders have in the information shared on the income statement, retained earnings
statement, balance sheet and statement of cash flows. How do we analyze if a company is
healthy or not?
Solution
Stakeholders are those persons or group of persons who have a interest in the company. The
Interest that they have may be financial or non financial, such as an employee has a financial
interest but customers have non-financial interest. Stakeholders are concerned about the working
of a company. Stakeholders are of two types
Various Types of Stakeholders are as follows:-
Different stakeholders have different interests in the company. Various Stakeholders and their
Interests are given below.
1.Customers. Customers have a stake in the goods of the company. Customers need to know that
company is making progress; it increases their confidence in using company’s products. All a
Customer need is Good a quality product with future care. A customer can understand from
Income statements of a company that whether companies do any research expenses to make their
product better for consumption.
2. Employees. Employees wants to see what company pays to them as a compensation for their
hard work. Companies Value added statements show the percentage of revenue distributed to
employees of company. Employees are also concerned about their job security. A profit making
company is suppose to give a satisfaction to employee that he has a good future in company.
3.Government. Government Collects takes which can be ascertained by reviewing Income
statement. Moreover companies help government by providing employment to millions of
people. Government has interest in knowing that companies prepare their financial statements
truthfully and frauds like Enron are not done.
4. Stock Holders. Stock Holders are basically owners of a company, They take major decisions
in working of a company. Results shown by income statements, Balance sheets and cash Flow
Statements help them take future decisions with precision.
5. Society. Society is also concerned about the working of business organizations. They have a
stake in Corporate Social Responsibility policies of a company. Whether company is taking
necessary steps to minimize pollution of water, air, or total environment as a whole. The
employment rate is another example of society’s stake in businesses.
6. Suppliers. Suppliers are Concerned about that cash position of company. The Current ratio of
Company. They supply Inventory so they need to know whether company is able to pay their
dues in time. Cash Flow statements show a supplier the position of cash of a company.
7. Creditors. Creditors are concerned about the payment of their dues.
8. Lenders. Lenders such as Bond Holders or Preference stock holders are concerned about the
efficient of use of their money and the return on their money. No one wants to lend his money to
a c.
Who are some other individuals who might want to use the informa.pdf
Who are some other individuals who might want to use the information in the financial
statements
Who are some other individuals who might want to use the information in the financial
statements
Who are some other individuals who might want to use the information in the financial
statements
Solution
Some Other Individuals who might use the information in financial statements
1) Suppliers - Suppliers are interested in the information of financial Statements. Suppliers get to
know about solvency and liquidity of company to pay its short term obligations.
2) Employees- Employees use the financial statement information to analyse about the
company\'s ability to pay salary and benefits. Others reasons of using financial statement
information are career development, Financial performance.
3) Customers - Customers use the financial statement information for assessing the company
expansion possibilities, its stability of operations, Its compliances review, for investment
decisions.
Internal.docRunning head Accounting information 1Acco.docx
Internal.doc
Running head: Accounting information
1
Accounting information
2
Accounting information
Student Name
University Name
Picket, n.d. defines internal controls as mechanisms to ensure objectives are achieved. Good controls encourage efficiency, compliance with laws and regulations, sound information, and seek to eliminate fraud and abuse. Internal control is also a process designed to provide assurance regarding the achievement of objectives in the effectiveness and efficiency of operations, reliability and internal and external reporting, and compliance with applicable laws and regulations and internal policies.
Everyone in the organization has some role to play in the organization’s internal control system. The board of directors is responsible for the company’s system of internal control and it sets appropriate policies on internal control and seek regular assurance to ensure that the system of internal control is effective in managing risks in the manner which it has approved. It is also the role of the management to implement board policies on risk and control and all the employees of an organization have some responsibility for internal control as part of their accountability for achieving objectives. Management also needs to review the effectiveness of internal control by forming its own view on effectiveness after due and careful enquiry based on the information and assurances provided to it.
A few examples of internal control activities are as follows: (1) Tracking of major agency achievements and comparing these to the plans, goals and established objectives by the management. (2) Establishing physical control to secure and safeguard vulnerable assets. (3) Use a variety of control activities in information processing. (4) There should be a proper execution of transactions by making sure they are authorized and executed only by persons
acting within the scope of their authority. (5) Segregate the key duties and responsibilities to reduce the risk of error or fraud. (6) Appropriate documentation of transactions and other
significant events and they should be readily available for examination. (7) Establish finance committee to spearhead planning and monitoring of financial activities and reporting. (8) Design an effective organizational structure that takes into account the culture of the organization which is critical for effective financial management. (9) Effective management controls which includes methods of financial planning and budgeting and reporting of actual results and follow-up of variances between budgeted and actual amounts.
There are two groups of users of accounting information: internal users and external users. The internal users are the company managers who use the accounting information to decide how to plan and control operations on a daily and long-term basis while the external users are the existing or the potential investors, creditors, analysts, financial advise.
Horngrens Accounting Global Edition 10th Edition Nobles Solutions Manual
Full download : http://alibabadownload.com/product/horngrens-accounting-global-edition-10th-edition-nobles-solutions-manual/
Horngrens Accounting Global Edition 10th Edition Nobles Solutions Manual
Sources of Finance.pdf
It is an endeavour to provide literature to UGC NET aspirants in commerce. This pdf contains the notes of Sources of Finance from the Unit 4 - Business Finance.
Horngren’s Financial & Managerial Accounting, 7th edition by Miller-Nobles so...
name：solution manual for Horngren's Financial & Managerial Accounting, 7th edition by Miller-Nobles
Edition： 7th edition
author：by Miller-Nobles
ISBN：9780136714248
type：solution manual
format：word/zip
All chapter include
Financial magment- Comparative Study of Sources of Finance
“Project Report on Comparative Study of Sources of Finance”
(MTNL and Reliance Communication)
7 27-2011 workers comp reforms
How’d we get to major workers’ comp reform in 2011?
Major features of the new legislation
Latest implementation information
Practical considerations
Fundamentals of Corporate Finance. Chapter 17 Payout Policy. 1) Wh.pdf
Fundamentals of Corporate Finance. Chapter 17 Payout Policy
. 1) What are the two ways corporations pay out cash to shareholders?
2) What companies are more likely to pay dividends?
3) What companies are not likely to pay dividends? Give examples.
4) Name and describe the 4 dividend dates.
5) What do states prohibit in regards to dividends?
6) Companies are not allowed to pay dividends past what point?
7) Describe stock dividends and stock splits.
8) What is stock repurchases?
9) Name and describe the 4 methods of stock repurchases.
10) What is green mail?
11) What are some manager’s dividend policies? Describe \"smoothing dividends\".
12) Describe good and bad news regarding stock dividends.
13) What does Modiligliani and Miller\'s argument state?.
Solution
1(I) Dividends: This is the most common way to payout cash to shareholders. Dividend is paid
annually & the decision to payout dividends totally depends upon the management of the
company.
(II) Repurchase of Shares: This is another way to payout cash. The repurchase can be done in
multiple ways. The most common way is to buy the shares back from the open market on the
prevailing prices. The other way is accelerated buy-back.
2) Companies with no better projects & future investment plans are more likely to payout
dividends as the company doesn’t have any future projects, which can earn higher return than the
market return & hence, they prefer to payout most of the profit through dividend.
3) Companies with a promising future projects, which have potential to generate higher returns,
are very less likely to pay dividends as it’s always better to invest in a project with higher returns
as it will stimulate growth & increase the value of the company.
4)(I) Declaration Date: The date, when dividends are announced by the board of directors.
(II) Date of Record: The date, on which the company will determine its shareholders, or
\"holders of record,\" and the company will use this date to establish to whom it will send
financial reports, proxy statements and other information.
(III) Ex-dividend Date: After the company sets the date of record, the ex-dividend date is set by
either the stock exchange or the National Association of Securities Dealers. If an investor
purchases a stock on or after its ex-dividend date, he or she will not receive the declared cash
dividend; instead, the seller of the stock will be entitled to that dividend. Investors who purchase
the stock before the ex-dividend date will receive the dividend.
(IV) Payment Date: The date, on which the declared dividend will be paid.
5) Legal-Capital: States prohibit corporations to pay cash dividends from its “Legal Capital”. It
refers to the sum of assets contributed to a company by shareholders when they are issued shares.
Capital Surplus Account: Corporation are prohibited from paying dividends using the funds from
the capital surplus account.
Retained Earnings: States also prohibit corporations from paying dividends using their ret.
Shares and Debentures - Financial Management
Welingkar Institute of Management Development and Research
By Gargi Kaoadia
InSurAnCe ManAgeMent, BoNus, MuTual FuNds, UnDerWritinG, ACTuarial SciEnce, A...
Short Description on Insurance Management, Mutual Funds, Bonus, Underwriting, Actuaries and Insurance Premium
Financial Report dentify the sources of finance available to Viet Son Tours
Financial Report dentify the sources of finance available to Viet Son Tourslamluanvan.net Viết thuê luận văn
DOWNLOAD MIỄN PHÍ 30000 TÀI LIỆU https://s.pro.vn/Z3UW
Dịch vụ viết thuê luận án tiến sĩ, luận văn thạc sĩ,báo cáo thực tập, khóa luận
Sdt/zalo 0967 538 624/0886 091 915
https://lamluanvan.net/dich-vu-so-3-viet-thue-assignment-luan-van-group/
Users of Accounting Information
Fundamentals of Accountancy, Business and Management - Users of Accounting Information
Xs mothers fourth child was X. the question its.pdf
X\'s mothers fourth child was X. the question itself says everything buddy... check
it once
Solution
X\'s mothers fourth child was X. the question itself says everything buddy... check
it once.
Types of Fluoride Additives Community water syst.pdf
Types of Fluoride Additives Community water systems in the United States use
one of three additives for water fluoridation. Decisions on which additive to use are based on
cost of product, product-handling requirements, space availability, and equipment. The three
additives are: * Fluorosilicic acid: a water-based solution used by most water fluoridation
programs in the United States. Fluorosilicic acid is also referred to as hydrofluorosilicate, FSA,
or HFS. * Sodium fluorosilicate: a dry additive, dissolved into a solution before being added to
water. * Sodium fluoride: a dry additive, typically used in small water systems, dissolved into a
solution before being added to water. Back to top Sources of Fluoride Additives Most fluoride
additives used in the United States are produced from phosphorite rock. Phosphorite is used
primarily in the manufacture of phosphate fertilizer. Phosphorite contains calcium phosphate
mixed with limestone (calcium carbonates) minerals and apatite—a mineral with high phosphate
and fluoride content. It is refluxed (heated) with sulfuric acid to produce a phosphoric acid-
gypsum (calcium sulfate-CaSO4) slurry. The heating process releases hydrogen fluoride (HF)
and silicon tetrafluoride (SiF4) gases which are captured by vacuum evaporators. These gases are
then condensed to a water-based solution of 23% FSA with the remainder as water.
Approximately 95% of FSA used for water fluoridation comes from this process. The remaining
5% of FSA is generated during the manufacture of hydrogen fluoride or from the use of
hydrogen fluoride in the manufacturing of solar panels and electronics. Since the early 1950s,
FSA has been the chief additive used for water fluoridation in the United States. The favorable
cost and high purity of FSA make it a popular source. Sodium fluorosilicate and sodium fluoride
are dry additives that come largely from FSA. FSA can be partially neutralized by either table
salt (sodium chloride) or caustic soda to get sodium fluorosilicate. If enough caustic soda is
added to neutralize the fluorosilicate completely, it results in sodium fluoride. Sodium fluoride is
also produced by mixing caustic soda with hydrogen fluoride, although approximately 90% of
the sodium fluoride used in the United States comes from FSA. Back to top Regulatory Scope
on Additives The U.S. Environmental Protection Agency (EPA) has authority over safe
community drinking water, as specified in the Safe Drinking Water Act. On the basis of the
scientific study of potential adverse health effects from contaminated water, the EPA sets a
Maximum Contaminant Level (MCL) concentration allowed for various organisms or
substances. Although EPA does not specifically regulate levels of “direct additives,” which are
chemicals added to water in the course of treatment, it does specify that the addition of chemicals
as part of treatment should not exceed the MCL concentration for regulated substances. This
MCL limit includes the levels natura.
More Related Content
Similar to Solution The basic users of financial statements and the .pdf
Sources of Finance.pdf
It is an endeavour to provide literature to UGC NET aspirants in commerce. This pdf contains the notes of Sources of Finance from the Unit 4 - Business Finance.
Horngren’s Financial & Managerial Accounting, 7th edition by Miller-Nobles so...
name：solution manual for Horngren's Financial & Managerial Accounting, 7th edition by Miller-Nobles
Edition： 7th edition
author：by Miller-Nobles
ISBN：9780136714248
type：solution manual
format：word/zip
All chapter include
Financial magment- Comparative Study of Sources of Finance
“Project Report on Comparative Study of Sources of Finance”
(MTNL and Reliance Communication)
7 27-2011 workers comp reforms
How’d we get to major workers’ comp reform in 2011?
Major features of the new legislation
Latest implementation information
Practical considerations
Fundamentals of Corporate Finance. Chapter 17 Payout Policy. 1) Wh.pdf
Fundamentals of Corporate Finance. Chapter 17 Payout Policy
. 1) What are the two ways corporations pay out cash to shareholders?
2) What companies are more likely to pay dividends?
3) What companies are not likely to pay dividends? Give examples.
4) Name and describe the 4 dividend dates.
5) What do states prohibit in regards to dividends?
6) Companies are not allowed to pay dividends past what point?
7) Describe stock dividends and stock splits.
8) What is stock repurchases?
9) Name and describe the 4 methods of stock repurchases.
10) What is green mail?
11) What are some manager’s dividend policies? Describe \"smoothing dividends\".
12) Describe good and bad news regarding stock dividends.
13) What does Modiligliani and Miller\'s argument state?.
Solution
1(I) Dividends: This is the most common way to payout cash to shareholders. Dividend is paid
annually & the decision to payout dividends totally depends upon the management of the
company.
(II) Repurchase of Shares: This is another way to payout cash. The repurchase can be done in
multiple ways. The most common way is to buy the shares back from the open market on the
prevailing prices. The other way is accelerated buy-back.
2) Companies with no better projects & future investment plans are more likely to payout
dividends as the company doesn’t have any future projects, which can earn higher return than the
market return & hence, they prefer to payout most of the profit through dividend.
3) Companies with a promising future projects, which have potential to generate higher returns,
are very less likely to pay dividends as it’s always better to invest in a project with higher returns
as it will stimulate growth & increase the value of the company.
4)(I) Declaration Date: The date, when dividends are announced by the board of directors.
(II) Date of Record: The date, on which the company will determine its shareholders, or
\"holders of record,\" and the company will use this date to establish to whom it will send
financial reports, proxy statements and other information.
(III) Ex-dividend Date: After the company sets the date of record, the ex-dividend date is set by
either the stock exchange or the National Association of Securities Dealers. If an investor
purchases a stock on or after its ex-dividend date, he or she will not receive the declared cash
dividend; instead, the seller of the stock will be entitled to that dividend. Investors who purchase
the stock before the ex-dividend date will receive the dividend.
(IV) Payment Date: The date, on which the declared dividend will be paid.
5) Legal-Capital: States prohibit corporations to pay cash dividends from its “Legal Capital”. It
refers to the sum of assets contributed to a company by shareholders when they are issued shares.
Capital Surplus Account: Corporation are prohibited from paying dividends using the funds from
the capital surplus account.
Retained Earnings: States also prohibit corporations from paying dividends using their ret.
Shares and Debentures - Financial Management
Welingkar Institute of Management Development and Research
By Gargi Kaoadia
InSurAnCe ManAgeMent, BoNus, MuTual FuNds, UnDerWritinG, ACTuarial SciEnce, A...
Short Description on Insurance Management, Mutual Funds, Bonus, Underwriting, Actuaries and Insurance Premium
Financial Report dentify the sources of finance available to Viet Son Tours
Financial Report dentify the sources of finance available to Viet Son Tourslamluanvan.net Viết thuê luận văn
DOWNLOAD MIỄN PHÍ 30000 TÀI LIỆU https://s.pro.vn/Z3UW
Dịch vụ viết thuê luận án tiến sĩ, luận văn thạc sĩ,báo cáo thực tập, khóa luận
Sdt/zalo 0967 538 624/0886 091 915
https://lamluanvan.net/dich-vu-so-3-viet-thue-assignment-luan-van-group/
Users of Accounting Information
Fundamentals of Accountancy, Business and Management - Users of Accounting Information
Similar to Solution The basic users of financial statements and the .pdf (20)
Horngren’s Financial & Managerial Accounting, 7th edition by Miller-Nobles so...
Horngren’s Financial & Managerial Accounting, 7th edition by Miller-Nobles so...
Financial magment- Comparative Study of Sources of Finance
Financial magment- Comparative Study of Sources of Finance
Fundamentals of Corporate Finance. Chapter 17 Payout Policy. 1) Wh.pdf
Fundamentals of Corporate Finance. Chapter 17 Payout Policy. 1) Wh.pdf
InSurAnCe ManAgeMent, BoNus, MuTual FuNds, UnDerWritinG, ACTuarial SciEnce, A...
InSurAnCe ManAgeMent, BoNus, MuTual FuNds, UnDerWritinG, ACTuarial SciEnce, A...
Financial Report dentify the sources of finance available to Viet Son Tours
Financial Report dentify the sources of finance available to Viet Son Tours
More from annapurnnatextailes
Xs mothers fourth child was X. the question its.pdf
X\'s mothers fourth child was X. the question itself says everything buddy... check
it once
Solution
X\'s mothers fourth child was X. the question itself says everything buddy... check
it once.
Types of Fluoride Additives Community water syst.pdf
Types of Fluoride Additives Community water systems in the United States use
one of three additives for water fluoridation. Decisions on which additive to use are based on
cost of product, product-handling requirements, space availability, and equipment. The three
additives are: * Fluorosilicic acid: a water-based solution used by most water fluoridation
programs in the United States. Fluorosilicic acid is also referred to as hydrofluorosilicate, FSA,
or HFS. * Sodium fluorosilicate: a dry additive, dissolved into a solution before being added to
water. * Sodium fluoride: a dry additive, typically used in small water systems, dissolved into a
solution before being added to water. Back to top Sources of Fluoride Additives Most fluoride
additives used in the United States are produced from phosphorite rock. Phosphorite is used
primarily in the manufacture of phosphate fertilizer. Phosphorite contains calcium phosphate
mixed with limestone (calcium carbonates) minerals and apatite—a mineral with high phosphate
and fluoride content. It is refluxed (heated) with sulfuric acid to produce a phosphoric acid-
gypsum (calcium sulfate-CaSO4) slurry. The heating process releases hydrogen fluoride (HF)
and silicon tetrafluoride (SiF4) gases which are captured by vacuum evaporators. These gases are
then condensed to a water-based solution of 23% FSA with the remainder as water.
Approximately 95% of FSA used for water fluoridation comes from this process. The remaining
5% of FSA is generated during the manufacture of hydrogen fluoride or from the use of
hydrogen fluoride in the manufacturing of solar panels and electronics. Since the early 1950s,
FSA has been the chief additive used for water fluoridation in the United States. The favorable
cost and high purity of FSA make it a popular source. Sodium fluorosilicate and sodium fluoride
are dry additives that come largely from FSA. FSA can be partially neutralized by either table
salt (sodium chloride) or caustic soda to get sodium fluorosilicate. If enough caustic soda is
added to neutralize the fluorosilicate completely, it results in sodium fluoride. Sodium fluoride is
also produced by mixing caustic soda with hydrogen fluoride, although approximately 90% of
the sodium fluoride used in the United States comes from FSA. Back to top Regulatory Scope
on Additives The U.S. Environmental Protection Agency (EPA) has authority over safe
community drinking water, as specified in the Safe Drinking Water Act. On the basis of the
scientific study of potential adverse health effects from contaminated water, the EPA sets a
Maximum Contaminant Level (MCL) concentration allowed for various organisms or
substances. Although EPA does not specifically regulate levels of “direct additives,” which are
chemicals added to water in the course of treatment, it does specify that the addition of chemicals
as part of treatment should not exceed the MCL concentration for regulated substances. This
MCL limit includes the levels natura.
This is blue because ion absorbs yellow radiation.pdf
This is blue because ion absorbs yellow radiation and transmits blue radiation
unchanged. As we know that copper is a transition metal and we also know that all transition
metals have coloured compounds due to their partially filled d orbitals. I hope you get it Please
rate
Solution
This is blue because ion absorbs yellow radiation and transmits blue radiation
unchanged. As we know that copper is a transition metal and we also know that all transition
metals have coloured compounds due to their partially filled d orbitals. I hope you get it Please
rate.
The theory, or doctrine, of forms (also called th.pdf
The theory, or doctrine, of forms (also called the theory of ideas) is Greek
philosopher Plato\'s (c. 428-347 b.c.) expression of his belief that there are forms that exist
outside the material realm, and therefore are unchanging-they do not come into existence,
change, or pass out of existence. It is these ideas that, according to Plato, are the objects or
essence of knowledge. Further, he posited that the body, the seat of appetite and passion, which
communes with the physical world (rather than the world of ideas or forms), is inferior to the
intellect. He believed the physical aspect of human beings to be irrational while the intellect, or
reason, was deemed to be rational. The origins of Plato\'s theory can be traced to Socrates (c.
470-399 b.c.), who believed that the psyche (inner spirit) has intuitive access to divinely known
principles or truths, which he attempted to formulate through his conversations with others.
Indeed, the Socratic dialogues, written by Plato, reveal that Socrates was striving to define the
exact nature of the traditional Greek moral virtues of piety, temperance, and courage. The theory,
or doctrine, of forms (also called the theory of ideas) is Greek philosopher Plato\'s (c. 428-347
b.c.) expression of his belief that there are forms that exist outside the material realm, and
therefore are unchanging-they do not come into existence, change, or pass out of existence. It is
these ideas that, according to Plato, are the objects or essence of knowledge. Further, he posited
that the body, the seat of appetite and passion, which communes with the physical world (rather
than the world of ideas or forms), is inferior to the intellect. He believed the physical aspect of
human beings to be irrational while the intellect, or reason, was deemed to be rational. The
origins of Plato\'s theory can be traced to Socrates (c. 470-399 b.c.), who believed that the
psyche (inner spirit) has intuitive access to divinely known principles or truths, which he
attempted to formulate through his conversations with others. Indeed, the Socratic dialogues,
written by Plato, reveal that Socrates was striving to define the exact nature of the traditional
Greek moral virtues of piety, temperance, and courage. The theory, or doctrine, of forms (also
called the theory of ideas) is Greek philosopher Plato\'s (c. 428-347 b.c.) expression of his belief
that there are forms that exist outside the material realm, and therefore are unchanging-they do
not come into existence, change, or pass out of existence. It is these ideas that, according to
Plato, are the objects or essence of knowledge. Further, he posited that the body, the seat of
appetite and passion, which communes with the physical world (rather than the world of ideas or
forms), is inferior to the intellect. He believed the physical aspect of human beings to be
irrational while the intellect, or reason, was deemed to be rational. The origins of Plato\'s theory
can be traced to Socrates (c. .
The left ring would undergo nitration more easily.pdf
The left ring would undergo nitration more easily because it has an activating group
attached to it (the O has plenty of electrons to delocalize across the entire ring) whereas the right
ring has a carbonyl as it\'s immediate substituent, which is a withdrawing group (it\'s sucking up
electrons in resonance and delivering it to the oxygen.)
Solution
The left ring would undergo nitration more easily because it has an activating group
attached to it (the O has plenty of electrons to delocalize across the entire ring) whereas the right
ring has a carbonyl as it\'s immediate substituent, which is a withdrawing group (it\'s sucking up
electrons in resonance and delivering it to the oxygen.).
sol a. Im guessing that they are used to react .pdf
sol a. I\'m guessing that they are used to react with potassium iodide. They oxidise
the iodide ion to the tri-iodide complex. so b. Sodium thiosulfate reduces tri-iodide to iodide.
Solution
sol a. I\'m guessing that they are used to react with potassium iodide. They oxidise
the iodide ion to the tri-iodide complex. so b. Sodium thiosulfate reduces tri-iodide to iodide..
Resonance structures demonstrate one of the weakn.pdf
Resonance structures demonstrate one of the weaknesses of the Lewis structure.
Molecules represented by a the Lewis structure either have single bonds, double bonds, or triple
bonds. The multiple bonds can sometimes be drawn in more than one place. In reality, the
multiple bond is averaged out over the molecule, so that all of the atoms may have a 1 1/2 bond
or a 1 1/3 bond rather than a single or a double bond.
Solution
Resonance structures demonstrate one of the weaknesses of the Lewis structure.
Molecules represented by a the Lewis structure either have single bonds, double bonds, or triple
bonds. The multiple bonds can sometimes be drawn in more than one place. In reality, the
multiple bond is averaged out over the molecule, so that all of the atoms may have a 1 1/2 bond
or a 1 1/3 bond rather than a single or a double bond..
no. of moles = massmolecular weight here no mass.pdf
no. of moles = mass/molecular weight here no mass is given in question
Solution
no. of moles = mass/molecular weight here no mass is given in question.
Moles of EDTA added initially to the solution = (.pdf
Moles of EDTA added initially to the solution = (25.0 mL* 1 L / 1000 mL) *
0.0452 mol/L =0.00113 mol Excess EDTA present in the solution after reacting withNi+2 and
Zn+2 = (12.4 mL * 1 L /1000mL) * 0.0123 mol/L 0.00015 mol Moles of EDTA reacting with
Zn+2 andNi+2 = 0.00113 mol - 0.00015 mol = 0.00098 mol Zn+2 and Ni+2 react with EDTA
in1:1 ratio Moles of Zn+2 and Ni+2 inthe solution = 0.00098 mol EDTA was displaced from
Zn and the liberated EDTA wastitrated with Mg+2 Moles of Mg+2 reacting with EDTA
liberatedfrom Zn+2 = (29.2 mL * 1 L / 1000 mL) * 0.0123mol/L = 0.00035916 mol Each mole
of EDTA is bound to 1 mole ofZn+2 Moles of Zn+2 in the solution = 0.00035916mol Zn+2
Moles of Ni+2 in the solution = 0.00098 mol -0.00035916 mol =0.00062084 mol Ni+2 [Zn+2] =
0.00035916 molZn+2 / 0.050 L = 0.0072 M Zn+2 [Ni+2] = 0.00062084 mol Ni+2 /0.050 L =
0.0124 M Ni+2
Solution
Moles of EDTA added initially to the solution = (25.0 mL* 1 L / 1000 mL) *
0.0452 mol/L =0.00113 mol Excess EDTA present in the solution after reacting withNi+2 and
Zn+2 = (12.4 mL * 1 L /1000mL) * 0.0123 mol/L 0.00015 mol Moles of EDTA reacting with
Zn+2 andNi+2 = 0.00113 mol - 0.00015 mol = 0.00098 mol Zn+2 and Ni+2 react with EDTA
in1:1 ratio Moles of Zn+2 and Ni+2 inthe solution = 0.00098 mol EDTA was displaced from
Zn and the liberated EDTA wastitrated with Mg+2 Moles of Mg+2 reacting with EDTA
liberatedfrom Zn+2 = (29.2 mL * 1 L / 1000 mL) * 0.0123mol/L = 0.00035916 mol Each mole
of EDTA is bound to 1 mole ofZn+2 Moles of Zn+2 in the solution = 0.00035916mol Zn+2
Moles of Ni+2 in the solution = 0.00098 mol -0.00035916 mol =0.00062084 mol Ni+2 [Zn+2] =
0.00035916 molZn+2 / 0.050 L = 0.0072 M Zn+2 [Ni+2] = 0.00062084 mol Ni+2 /0.050 L =
0.0124 M Ni+2.
IV Water has a high boiling compared to H2S. .pdf
IV: Water has a high boiling compared to H2S.
Solution
IV: Water has a high boiling compared to H2S..
it is NO2 addition in meta position giving 1,3 di.pdf
it is NO2 addition in meta position giving 1,3 dinitro benzene
Solution
it is NO2 addition in meta position giving 1,3 dinitro benzene.
in saturn weight is 1.064 times that of the earth.pdf
in saturn weight is 1.064 times that of the earth 1.064*130 =138.32 ponds please
rate
Solution
in saturn weight is 1.064 times that of the earth 1.064*130 =138.32 ponds please
rate.
If I am reading the question right, this would be.pdf
If I am reading the question right, this would be similar to something like a pond or
a creek receiving fertilizer runoff. This is a more biological standpoint rather than chemical, but
the ideas should be the same. #1. Influx of nutrients causes a bacterial/algal bloom, depleting
water of oxygen. #2. As oxygen levels drop, algae/bacteria begin to die depleting water even
more. #3. Animal live begins to die, causing another increase in nitrogen (ammonia etc) in the
water #4. Anaerobic bacteria as well as plants begin to remove carbon dioxide, phosphates,
nitrogen etc from the water and begin to bring system back into equilbrium. #5. Assuming influx
of fertilizer runoff it not constant, the system will either return to its original state, or a new
equilibrium, depending on how extreme the case was. Another possibility, considering the
\"dynamic surface\", would mean that the extra carbon dioxide would outgas and allow oxygen
to reenter the system. This is the general order, and there might be repetition of steps or one or
two might switch places.
Solution
If I am reading the question right, this would be similar to something like a pond or
a creek receiving fertilizer runoff. This is a more biological standpoint rather than chemical, but
the ideas should be the same. #1. Influx of nutrients causes a bacterial/algal bloom, depleting
water of oxygen. #2. As oxygen levels drop, algae/bacteria begin to die depleting water even
more. #3. Animal live begins to die, causing another increase in nitrogen (ammonia etc) in the
water #4. Anaerobic bacteria as well as plants begin to remove carbon dioxide, phosphates,
nitrogen etc from the water and begin to bring system back into equilbrium. #5. Assuming influx
of fertilizer runoff it not constant, the system will either return to its original state, or a new
equilibrium, depending on how extreme the case was. Another possibility, considering the
\"dynamic surface\", would mean that the extra carbon dioxide would outgas and allow oxygen
to reenter the system. This is the general order, and there might be repetition of steps or one or
two might switch places..
Which of the following are true statements about serial interfaces.pdf
Which of the following are true statements about serial interfaces?
Answer D. The default encapsulation is HDLC, but it can be changed
Explanation:-
Serial interfaces is used to connect to devices outside the network boundary or WAN.
They are multilink point-to-point connections.
The default encapsulation is HDLC(High-Level Data Link Controller), but it can be changed to
Frame Relay, PPP, Synchronous Data Link Control (SDLC), SMDS, Cisco Serial Tunnel
(STUN), Cisco Bisync Serial Tunnel (BSTUN), X.25-based encapsulations.
Solution
Which of the following are true statements about serial interfaces?
Answer D. The default encapsulation is HDLC, but it can be changed
Explanation:-
Serial interfaces is used to connect to devices outside the network boundary or WAN.
They are multilink point-to-point connections.
The default encapsulation is HDLC(High-Level Data Link Controller), but it can be changed to
Frame Relay, PPP, Synchronous Data Link Control (SDLC), SMDS, Cisco Serial Tunnel
(STUN), Cisco Bisync Serial Tunnel (BSTUN), X.25-based encapsulations..
Thermostability is the quality of a subst.pdf
Thermostability
is the quality of a substance to resist irreversible change in its chemical or
physical structure, often by resisting decomposition or polymerisation, at a high relative
temperature.
Thermostable materials may be used industrially as fire retardants. A thermostableplastic, an
uncommon and unconventional term, is likely to refer to a thermosetting plastic that cannot be
reshaped when heated, than to a thermoplastic that can be remelted and recast. Thermostability
also commonly refers to a protein resistant to change in its protein structure due to applied heat.
Thermostable proteins
Most life-forms on Earth live at temperatures of less than 50 °C, commonly from 15 to 50 °C.
Above this, thermal energy may cause the unfolding of the protein structure, where the activity
of the protein is abolished and a condition understandably deleterious to continuing life-
functions. The denaturing of proteins in albumen from a clear, nearly colourless liquid to an
opaque white, insoluble gel is a common example of this.
Certain thermophilic life-forms exist which can withstand temperatures above this, and have
corresponding adaptations to preserve protein function at these temperatures. . These can include
altered bulk properties of the cell to stabilize all proteins, and specific changes to individual
proteins. Examining homologous proteins present in these thermophiles and other organisms
reveal only slight differences in the protein structure. One notable difference is the presence of
extra hydrogen bonds in the thermophile\'s proteins—meaning that the protein structure is more
resistant to unfolding. The presence of certain types of salt has been observed to alter
thermostability in the proteins, indicating that salt bridges likely also play a role in
thermostability Other factors of protein thermostability are compactness of protein structure,.
oligomerization and strength interaction between subunits.
Thermostable enzymes such as Taq polymerase and Pfu DNA polymerase are used in
polymerase chain reactions where temperatures of 94 °C or over are used to melt apart DNA
strands.
Approaches to improve thermostability of proteins
Protein engineering can be used to enhance the thermostability of proteins. A number of site-
directed and random mutagenesis techniques, in addition to directed evolution .have been used to
increase the thermostability of target proteins. Comparative methods have been used to increase
the stability of mesophilic proteins based on comparison to thermophilic homologs. Additionally,
analysis of the protein unfolding by molecular dynamics can be used to understand the process of
unfolding and then design stabilizing mutations. Rational protein engineering for increasing
protein thermostability includes mutations which truncate loops, increase salt bridges. or
hydrogen bonds, introduced disulfide bonds. In addition, ligand binding can increase the stability
of the protein, particularly when purified.
Bacillus lichenifor.
True,Design activities for high risk system interfaces might come up.pdf
True,Design activities for high risk system interfaces might come up in early inception phase
iterations.
Solution
True,Design activities for high risk system interfaces might come up in early inception phase
iterations..
WAN is a wide area network in which two or more computer or other de.pdf
WAN is a wide area network in which two or more computer or other devices connected to share
data and resources. There are two types of medias are used for creating a comouter network i.e.
Wired or Guided Media and Wirless or Unguided Media.
For the connectivity of two points over a large distance we can choose any of the media on the
basis of following charactersitics.
1. Wired Media- There are three types of wired medias are used for connectivity ie. Twisted, Co-
axial and Fiber Optics
for the long distance of connectivity we choose Fiber Optics due to it provide very high speed of
data transfer. but the cost of these types of media is very expensive.
If we choose Twisted Pair it has a limitation of transfer rate is maximum of 100mbps which is
feasible for LAN not for the WAN.
2. Wireless Media- Wirelesss connectity can be established with the help of Wi-Fi Router,
Satelite Communication, Radar etc. No doubt it provide fast transfer of data over the network but
mail problem of these types of devices are first it is very expensive, second issue is with the
range offered by the Wireless Access point is at limited distance so a large number of Wireless
access points are required to establish a long distance based wan.
Also backbone is required to be establish with wired media, which again restricted to the speed
of the network.
Solution
WAN is a wide area network in which two or more computer or other devices connected to share
data and resources. There are two types of medias are used for creating a comouter network i.e.
Wired or Guided Media and Wirless or Unguided Media.
For the connectivity of two points over a large distance we can choose any of the media on the
basis of following charactersitics.
1. Wired Media- There are three types of wired medias are used for connectivity ie. Twisted, Co-
axial and Fiber Optics
for the long distance of connectivity we choose Fiber Optics due to it provide very high speed of
data transfer. but the cost of these types of media is very expensive.
If we choose Twisted Pair it has a limitation of transfer rate is maximum of 100mbps which is
feasible for LAN not for the WAN.
2. Wireless Media- Wirelesss connectity can be established with the help of Wi-Fi Router,
Satelite Communication, Radar etc. No doubt it provide fast transfer of data over the network but
mail problem of these types of devices are first it is very expensive, second issue is with the
range offered by the Wireless Access point is at limited distance so a large number of Wireless
access points are required to establish a long distance based wan.
Also backbone is required to be establish with wired media, which again restricted to the speed
of the network..
The most important characteristics that comprise the software qualit.pdf
The most important characteristics that comprise the software quality are:
• Functionality
• Reliability
• Usability
• Efficiency
• Maintainability
• Portability
Functionality:
Functionality is the essential characteristic of any product or the service that refers to the
specification of the functions of the software and to the correctness of the functions. As the
system does not typically function in isolation, it helps the system to interact with the other
components. This relates to the unauthorized access to the software functions.
Reliability:
This characteristic concerns the frequency of failure of the software and has the capacity of
software to withstand and recover from components or environment and failure. It is also capable
of bringing back the failed system to the full operation, including data and network connections.
Usability:
It is used to determine the simplicity of the systems function, relate the user models to computer
interaction methods and has the ability of software to be easily operated by the user.
Efficiency:
This characteristic is concerned with the system resources used when providing the required
functionality. The amount of disk space, memory, network etc provides a good indication of this
characteristic.
Maintainability:
This characteristic has the ability to identify the root cause of a failure within the software, the
amount of effort to change a system and the effort needed to test the system changes.
Portability:
The ability of the system to change to new specifications or operating environments.
To achieve the software of high quality it is necessary to understand the ways how the software
system fails. The challenges are:
Solution
The most important characteristics that comprise the software quality are:
• Functionality
• Reliability
• Usability
• Efficiency
• Maintainability
• Portability
Functionality:
Functionality is the essential characteristic of any product or the service that refers to the
specification of the functions of the software and to the correctness of the functions. As the
system does not typically function in isolation, it helps the system to interact with the other
components. This relates to the unauthorized access to the software functions.
Reliability:
This characteristic concerns the frequency of failure of the software and has the capacity of
software to withstand and recover from components or environment and failure. It is also capable
of bringing back the failed system to the full operation, including data and network connections.
Usability:
It is used to determine the simplicity of the systems function, relate the user models to computer
interaction methods and has the ability of software to be easily operated by the user.
Efficiency:
This characteristic is concerned with the system resources used when providing the required
functionality. The amount of disk space, memory, network etc provides a good indication of this
characteristic.
Maintainability:
This characteristic has .
The electronic configuration of H is 1s1 It has one valence electr.pdf
The electronic configuration of H is 1s1
It has one valence electron like the ist group and
It gets octet configuration [He] when it accepts one electron like the Group 7 elements
(Halogens)
Hence Hydrogen is like group 1 and group 7.
Solution
The electronic configuration of H is 1s1
It has one valence electron like the ist group and
It gets octet configuration [He] when it accepts one electron like the Group 7 elements
(Halogens)
Hence Hydrogen is like group 1 and group 7..
More from annapurnnatextailes (20)
Xs mothers fourth child was X. the question its.pdf
Xs mothers fourth child was X. the question its.pdf
Types of Fluoride Additives Community water syst.pdf
Types of Fluoride Additives Community water syst.pdf
This is blue because ion absorbs yellow radiation.pdf
This is blue because ion absorbs yellow radiation.pdf
The theory, or doctrine, of forms (also called th.pdf
The theory, or doctrine, of forms (also called th.pdf
The left ring would undergo nitration more easily.pdf
The left ring would undergo nitration more easily.pdf
sol a. Im guessing that they are used to react .pdf
sol a. Im guessing that they are used to react .pdf
Resonance structures demonstrate one of the weakn.pdf
Resonance structures demonstrate one of the weakn.pdf
no. of moles = massmolecular weight here no mass.pdf
no. of moles = massmolecular weight here no mass.pdf
Moles of EDTA added initially to the solution = (.pdf
Moles of EDTA added initially to the solution = (.pdf
it is NO2 addition in meta position giving 1,3 di.pdf
it is NO2 addition in meta position giving 1,3 di.pdf
in saturn weight is 1.064 times that of the earth.pdf
in saturn weight is 1.064 times that of the earth.pdf
If I am reading the question right, this would be.pdf
If I am reading the question right, this would be.pdf
Which of the following are true statements about serial interfaces.pdf
Which of the following are true statements about serial interfaces.pdf
True,Design activities for high risk system interfaces might come up.pdf
True,Design activities for high risk system interfaces might come up.pdf
WAN is a wide area network in which two or more computer or other de.pdf
WAN is a wide area network in which two or more computer or other de.pdf
The most important characteristics that comprise the software qualit.pdf
The most important characteristics that comprise the software qualit.pdf
The electronic configuration of H is 1s1 It has one valence electr.pdf
The electronic configuration of H is 1s1 It has one valence electr.pdf
Recently uploaded
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Protectable subject matters, Protection in biotechnology, Protection of other biological materials, Ownership and period of protection
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
mass media studies
CBSE
Full Book
for class 11th
Fresher’s Quiz 2023 at GMC Nizamabad.pptx
General quiz conducted for freshers ,2k23 batch at Government Medical College,Nizamabad
Contact:srisuryab199@gmail.com
What is the purpose of studying mathematics.pptx
Students often ask about what the purpose is for their learning. This PowerPoint highlights some really important reasons to study Mathematics.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Thesis Statement for students diagnonsed withADHD.ppt
Presentation required for the master in Education.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance
Best Digital Marketing Institute In NOIDA
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Advantages and Disadvantages of CMS from an SEO Perspective
Advantages and Disadvantages of CMS from an SEO Perspective
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Recently uploaded (20)
"Protectable subject matters, Protection in biotechnology, Protection of othe...
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Thesis Statement for students diagnonsed withADHD.ppt
Thesis Statement for students diagnonsed withADHD.ppt
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance.pptx
Advantages and Disadvantages of CMS from an SEO Perspective
Advantages and Disadvantages of CMS from an SEO Perspective
Solution The basic users of financial statements and the .pdf
- 1. Solution : The basic users of financial statements and the way they use them are given below: 1st Investors: Investors use financial statements to know the risk they are taking by remain invested in the company and returns they are going to get for the risk they have taken. 2nd Lenders: Lenders use financial statement to know the ability of the company to pay interest and financial health of the company to provide further loans to the company. 3rd Creditors/Suppliers: Suppliers use financial statements to determine whether their debtor is able to pay due amount in time and profitability of the company to decide the terms of futures transactions to be done. 4th Owners or management : Management uses financial statements to make financial or operational decision for business . 5th Governments : Governments uses financial statement to know the activities of the company are appropriate for general public at large and whether pay taxes or not and law compliant or not. 6th Employees: Employees uses financial statement to know the stability & profitability of their employer business to know the value of stock options if any they get from their employer and their salary and job stability too. 7th Rating agencies: Rating agencies uses financial statement to do credit rating of the company or its securities. 8th Unions : Unions uses financial statements to know the ability of the company to pay compensation or other benefits to the members of their unions. Please feel free to ask if anything about above solution in comment section of the question.