In Pharma and Biotech, Weightage of the Documentation is around 70 % because as per FDA "If you do not have Document, You dint have do it."
So Good Documentation Practice is of tremendous importance for the Industry to comply any regulation like FDA, GMP or ISO.
In Pharma and Biotech, Weightage of the Documentation is around 70 % because as per FDA "If you do not have Document, You dint have do it."
So Good Documentation Practice is of tremendous importance for the Industry to comply any regulation like FDA, GMP or ISO.
Multi Layer Printed Circuit Board Introduction and Manufacturing processAditya Deshpande
Multi Layer Printed Circuit Board Introduction and Manufacturing process presentation will help you to understand how the miniaturization is possible in electronics and also the Manufacturing of Multi Layer Printed Circuit Board.
Coronavirus presentation by Leyla RashidliAzer Rashidov
Today,I've done a presentation for students about most important health issue in our community,that is called Middle East Respiratory Syndrome-Coronavirus(MERS-CoV).
Good documentation practice (commonly abbreviated GDP, recommended to abbreviate as GDocP to distinguish from "good distribution practice" also abbreviated GDP) is a term in the pharmaceutical industry to describe standards by which documents are created and maintained. While some GDocP standards are codified by various competent authorities, others are not but are considered cGMP (with emphasis on the "c", or "current"). Some competent authorities release or adopt guidelines, and they may include non-codified GDocP expectations. While authorities will inspect against these guidelines and cGMP expectations in addition to the legal requirements and make comments or observations if departures are seen. In the past years, the application of GDocP is also expanding to cosmetic industry, excipient and ingredient manufacturers.
Multi Layer Printed Circuit Board Introduction and Manufacturing processAditya Deshpande
Multi Layer Printed Circuit Board Introduction and Manufacturing process presentation will help you to understand how the miniaturization is possible in electronics and also the Manufacturing of Multi Layer Printed Circuit Board.
Coronavirus presentation by Leyla RashidliAzer Rashidov
Today,I've done a presentation for students about most important health issue in our community,that is called Middle East Respiratory Syndrome-Coronavirus(MERS-CoV).
Good documentation practice (commonly abbreviated GDP, recommended to abbreviate as GDocP to distinguish from "good distribution practice" also abbreviated GDP) is a term in the pharmaceutical industry to describe standards by which documents are created and maintained. While some GDocP standards are codified by various competent authorities, others are not but are considered cGMP (with emphasis on the "c", or "current"). Some competent authorities release or adopt guidelines, and they may include non-codified GDocP expectations. While authorities will inspect against these guidelines and cGMP expectations in addition to the legal requirements and make comments or observations if departures are seen. In the past years, the application of GDocP is also expanding to cosmetic industry, excipient and ingredient manufacturers.
Magento Mobile App Builder, Mobile App For Magento Ecommerce Store - AppJettyAppJetty
Mobile app builder for Magento is a mobile app extension which helps you to build a native Android app and native iOS app for your Magento store easily and quickly.
Know More: https://www.appjetty.com/magento-magemob-app-builder.htm
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
1. SlideShare Manual
There are four steps to use SlideShare component:
A) Installation
B) Uploading Slides
C) Displaying Slides on the pages
D) Slides Display Configuration
A) Installation
i) Installation of SlideShare Module, below are the :
1) Logging in to Administration Panel of Joomla.
2) Go to Install/Uninstall from Extensions on the menu.
3) Browse the package source, Click Upload File & Install.
4) Make sure the installation process completed successfully.
ii) Installation of SlideShare Component, below are the steps:
1) Go to Install/Uninstall from Extensions on the menu.
2) Browse the package source, Click Upload File & Install.
3) Make sure the installation process completed successfully.
iii) Adding API key, below are the steps:
1) Opening Component Category Manager for the SlideShare
2) Opening Parameters
3) Saving SlideShare global configuration
B. Uploading Slides Section
i) Add, Edit, Delete, Publish or Un-publish the Categories.
a) Opening Component Category Manager for the SlideShare
b) Publish the existing un-published category
c) Un-publish the existing published category
d) Adding new Category
e) Editing existing Category
f) Deleting existing Category
2. ii) Add, Edit, Delete, Publish or Un-publish the Slides.
a) Opening Presentation Manager for the SlideShare
b) Publish the existing un-published Slide
c) Un-publish the existing published Slide
d) Adding new Slide
e) Editing the existing Slide
f) Deleting the existing Slide
C. Displaying Slides on the pages
a) Adding the link to the menu
b) Working with Link Menu Items details
c) Editing the link
d) Making the link the default page
e) Deleting the link
f) Moving the link to other menu
g) Publishing or Unpulishing
h) Editing the link
D. Slides Display Configuration
a) Configuring the display parameters
b) Editing display parameters
3. A. Installation
i) Installation of SlideShare Module
1) Logging in to Administration Panel of Joomla:
User must logged in to administration panel of Joomla
2) Go to Install/Uninstall from Extensions on the menu:
From the main menu go to Extensions
Select Install/Uninstall
4. 3) Browse the package source, Click Upload File & Install:
Please browse the package from Upload Package File section, select the SlideShare
module package source files and click Upload file & Install button so that package can be
installed.
4) Make sure the installation process completed successfully:
If the installation process successfully done then you will have Message displayed
“Install Module Success“.
5. ii) Installation of SlideShare Component, below are the steps:
After the successful installation of the SlideShare module, you should do these steps
again for the installation of the SlideShare component installation.
1) Go to Install/Uninstall from Extensions on the menu:
From the main menu go to Extensions
Select Install/Uninstall
6. 2) Browse the package source, Click Upload File & Install:
Please browse the package from Upload Package File section, select the SlideShare
component package source files and click Upload file & Install button so that package
can be installed.
3) Make sure the installation process completed successfully:
If the installation process successfully done then you will have Message displayed
“Install Module Success“.
iii) Adding API key:
7. To use the SlideShare component user must ask for the API key at
http://www.SlideShare.net/developers.
a) Opening Component Category Manager for the SlideShare
To open Category Manager select SlideShare under the Components and select
Categories.
b) Opening Parameters
Click on the parameters from right corner of the category manager menu
c) Saving SlideShare global configuration
Clicking on parameters will take you to another page where you should fill out the form
as follows:
8. Field1:Auto-approve Frontend Submission; user should select ‘yes’ to use SlideShare
Field2:Key for SlideShare; Enter SlideShare key provided by SlideShare Team
Field3:Shared SecredKey; Enter SlideShare SecredKey provided by SlideShare Team
Field4:Username; Enter Username on SlideShare.net
Field5:Password; Enter Password on SlideShare.net
9. B. Uploading Slides Section
i) Add, Edit, Delete, Publish or Un-publish the Categories.
To use SlideShare, user must Add the category, by default there is only one category
which is “General”. To add, edit, delete, publish or un-publishing the categories user
should go to Components from the main menu.
i. Opening Component Category Manager for the SlideShare
To open Category Manager select SlideShare under the Components and select
Categories.
ii. Publish the existing un-published category
10. From the Published Column click on the “cross icon” to make the category published.
iii. Un-publish the existing published category
From the Published Column click on the “right icon” to make the category un-published.
iv. Adding new Category
To add the new category, click on the New button, you will then taken to the next page
type the name you want to make the category name and click the save button from the
right corner to save the changes you made.
11. v. Editing existing Category
Click the check box of he category and then click on edit button to edit the name of the
category you selected, it will take you to next page where you can edit the name make
changes as needed click on the save button to exit editing, to discard the changes you
made click on cancel button.
Click on the check box
Click on edit button
12. Make the changes to name of the category and then save for the changes you made or just
cancel to discard the changes.
vi. Deleting existing Category
Click the check box of the category you want to delete.
After making selection by clicking to the checkbox click on the delete button to delete the
category.
13. ii) Add, Edit, Delete, Publish or Un-publish the Slides.
User can upload your own presentations in different formats e.g. ppt, pdf, odp, pps.
a) Opening Presentation Manager for the SlideShare:
To open Presentation Manager select SlideShare under the Components and select Slides.
b) Publish the existing un-published category:
From the Published Column click on the “cross icon” to make the slide published
14. c) Un-publish the existing published category:
From the Published Column click on the “right icon” to make the slide un-published
d) Adding new Slide:
To add the new slide, click on the New button
You will then taken to the next page browse to select the slide you want to upload, type
the title you want to make the slide title, select the category you want you slide to show
in that category, type the description you want to show with the slide, type the tags you
want to the slide to be searched by those and then click the save button from the right
corner to save the changes you made.
15. e) Editing the existing Slide:
Click the check box of the slide and then click on edit button.
Clicking on edit button will take you to another page where you can edit the title,
category, description and the tags of the slide you selected.
Click on the save button to save the editing you made otherwise to discard the changes
you made click on cancel button.
16. f) Deleting the existing Slide:
Click the check box of the slide you want to delete.
After making selection click on the delete button to delete the slide.
17. B) Displaying Slides on the pages
a) Adding the link to the menu:
After making sure logged in to Administration panel, Go to Menus from the main menu,
click on Menu Manager.
You will be taken to Menu Manager page, select the menu where you want to put the link
for SlideShare then click to on according from the Menu Item(s) column.
You will be taken to Menu Item Manager page, click the new button from the menu item
manager’s menu.
18. A page will display with Menu Item: (New), select the menu item type where as you are
going to make link for SlideShare so click on SlideShare
You will be taken to expanded sub menu select the appropriate item to make link.
For SlideShare overview: Click on Slides
For SlideShare view: Click on Slide
For All uploaded slides: Click on Myslides
For Importing Slides: Click on Importslide
For Adding Slides: Click on Editslide
For Deleting the slides: Click on Delslide
19. b) Working with Link Menu Items details:
Type the title, you want it to be make an alias, confirm the link, making sure of display in
selected menu is the one you want the link to be displayed in. Select the parent menu
item, if Top selected means the link will be shown on the main of the menu. And if top
not selected the other selected menu item will be parent then the link will be shown under
parent item.
Make sure you want the link to be published on saving or not. Be sure with the Access
levels if you want the link to be shown to registered users select Registered, if you want it
to show for everyone, select the public.
20. Click save to save the changes you made, or just cancel to discard changes.
The link will be displayed as configured.
c) Editing the link:
Go to Menu Item Manager, select the item you want to edit by simply clicking on the
appropriate check box and then click on edit.
21. d) Making the link the default page:
Select the appropriate item you want it to be default and then click on default button.
e) Deleting the link:
Select the link you want to be delete and click on Trash button.
f) Moving the link to other menu:
22. Select the appropriate item you want to move it to other menu and click on Move button.
It will take to another page where you can select the menu you want the link to show in
that. Select the menu from Move to Menu drop down and click move button to make
changes otherwise click cancel to discard changes.
g) Publishing or Unpulishing:
Select the link you want to publish or unpublish and click publish if the link already
unpublished and vise versa.
23. h) Editing the link:
Select the link you want to edit and working with Menu Items Details.
Click to save changes you made otherwise click cancel to discard changes.
24. D. Slides Display Configuration
a) Configuring new display parameters
When adding a link to the menu, from the main menu section go to Menu Manager
The select the Menu Item(s) from the menu where you want to make link for SlideShare
Click on the new button from the right corner of the Menu Manager
Click on the SlideShare
25. Click on the SlideShare Overview presentation ( Slides ) link it will take you the next
page
Make the title, alias, select parent item
26. Right side panel of Parameters (Basic) you can select the Amount of Presentation for this
page. Select what if you want to show the title as yes or no.
Presentation in one row can be set by selecting one of the option from the dropdown
menu of Presentation in one row field.
27. Click the save button to save the changes, or cancel to discard changes.
b) Editing display parameters
To edit display parameters, from the main menu section go to Menu Manager
The select the Menu Item(s) from the menu where you want to make link for SlideShare
28. Click to edit on the already created link for the SlideShare
So then you will have the page where you can edit the parameters of the SlideShare from
the right side panel.
Open the drop down menu for changing the amount of Presentation to be displayed on a
page.
29. And click the drop down to edit the presentation in a row if required.
Click the save to button to save the changes or simply click cancel to discard changes.