Siemens S4 Switchboard

Related catalogues Contents
Low-Voltage Controls and
Distribution
SIRIUS · SENTRON · SIVACON
Order No.:
Catalog
E86060-K1002-A101-A7-7600
Technical Information incl.
LV 1
LV 1 T
Systems • Controlgear: Contactors and contactor assemblies,
solid-state switching devices • Protection equipment • Load
feeders, motor starters and soft starters • Monitoring and
control devices • Detecting devices • Commanding and
signaling devices • Transformers • Power supplies • Planning
and configuration with SIRIUS • Power Management System •
SIVACON Power, distribution boards, busway and cubicle
systems • SENTRON switching and protection devices for
power distribution • Air circuit breakers, molded case circuit
breakers, switch disconnectors • Software for power distribution
• BETA low-voltage circuit protection
Low-Voltage
Controls and Components
for Applications according to UL
Order no.:
E86060-K1816-A101-A1-7600
LV 16 SIRIUS 3RV17 and 3RV18 circuit breakers according to
UL 489 • SIVACON Components for 8US Distribution Systems
according to UL 508A • SENTRON 3WL5 air circuit
breakers/non-automatic air circuit breakers according to UL
489/IEC • SENTRON 3VL Molded Case Circuit Breakers
according to UL 489/IEC • ALPHA Devices according to UL
Standard • BETA Devices according to UL standard
Industrial Communication
Industrial Communication
for Automation and Drives
Order No.:
E86060-K6710-A101-B6-7600
E86060-K6710-A121-A2-7600
IK PI
IK PI N
PROFINET/Industrial Ethernet • Industrial Mobile
Communicaton • PROFIBUS to IEC 61158/EN 50170 • SIMATIC
ET 200 distributed I/Os • AS-Interface to EN 50295/IEC 61158 •
Remote operation with SINAUT Telecontrol • Routers •
ECOFAST system
SICUBE
System Cubicles and
Cubicle Air-Conditioning
Order No.:
E86060-K1920-A101-A3-7600
LV 50 System cubicles • Cubicle modifications • Cubicle expansion
components • Accessories • Special cubicles Cubicle solutions
in applications • Cubicle air-conditioning • Special colors
SIDAC
Reactors and Filters
Order No.:
E86060-K2803-A101-A4-7600
LV 60 Commutating reactors for converters • Mains reactors for
frequency converters • Iron-core output reactors • Ferrite output
reactors • Iron-core smoothing reactors • Smoothing air-core
reactors • Filter reactors • Application-specific reactors • Radio
interference suppression filters • dv/dt filters • Sinewave filters
SIVACON 8PS
CD-K, BD01, BD2
Busbar Trunking Systems
up to 1250 A
Order No.:
E86060-K1870-A101-A3-7600
LV 70 Busbar trunking systems, overview • CD-K system
(25 A to 40 A) • BD01 system (40 A to 160 A) • BD2 system (160
A to 1250 A)
Automation & Drives
The A&D Offline Mall
CD-ROM:
E86060-D4001-A110-C6-7600
DVD:
E86060-D4001-A510-C6-7600
CA 01 All Automation and Drives products,
including those in the catalogs listed above.
A&D Mall
Internet:
http://www.siemens.com/automa
tion/mall
All Automation and Drives products,
including those in the catalogs listed above.
Catalog-PDF
Internet:
http://www.automation.
siemens.com/cd
All catalogs for low-voltage controls and distribution can be
downloaded as PDF files.
Registered trademarks Technical Assistance
All product designations may be registered trademarks or
product names of Siemens AG or other supplying
companies. Third parties using these trademarks or product
names for their own purposes may infringe upon the rights of
the trademark owners.
Further information about low-voltage controls is available on
the Internet at:
http://www.siemens.com/lowvoltage
Expert technical assistance for
Low-voltage controls and
electrical installation.
Tel.: +49 (9 11) 8 95-59 00
Fax: +49 (9 11) 8 95-59 07
E-Mail: technical-
assistance@siemens.com

sivacon S4
Power Distribution Boards
Catalogue LV 56 · 2008
Introduction
1
2
Standard Configurations
3
Cubicles, Supporting Structure and
Enclosures
4
Busbar System
5
Assembly Kits for Switching Devices
6
Covers, Modular Doors, Mounting Plates,
19” Rack
7
Internal Separation
8
Air-conditioning Products
9
Accessories
10
Mechanical Dimensions
11
Planning and Configuration
12
Appendix
13
Not valid:
Catalogue LV 56 · 2006
Contact your local Siemens
representative for further information
© Siemens AG 2008
The products listed in
this catalogue are ma-
nufactured at produc-
tion units working accor-
ding to a quality system
certified for conformity
to EN 29001 (ISO 9001)

2 Siemens LV 56 · 2008
Information on catalogue LV 56 · 2008 and Manual SIVACON S4 · 2008
Catalogue LV 56 · 2008 contains the data relevant
to selection and ordering.
Additional information is given in SIVACON S4 Manual.
Delivery class (DC)1)
The delivery class indicates a product’s delivery time
in working days from order receipt to product ready
for dispatching from the warehouse.
Total deliver time is given by the sum of order processing time in the country of
origin, predetermined delivery time and transport time.
Price1)
The stated price is in € and refers to the price per
unit (PU).
Price unit (PU)
The price unit speciﬁes to how many items (IT), sets
(ST) or metres (M) the stated price and weight
applies.
Price group (PG)1)
Each product is assigned to a price group.
Dimensions
All dimensions are expressed in mm.
1) Information is provided on a separate price list.
Explanations

Siemens LV 56 · 2008
1Introduction
1/2 Siemens Automation and Drives
Welcome
1/4 Sharpen your competitive edge
Totally Integrated Automation
1/6 Low-Voltage Power Distribution
with SIVACON, SENTRON and SIMARIS

1/2 Siemens LV 56 · 2008
Siemens Automation and Drives.
Welcome
More than 60,000 people aiming for the same goal: in-
creasing your competitiveness. That's Siemens Automa-
tion and Drives.
We offer you a comprehensive portfolio for sustained
success in your sector, whether you’re talking automa-
tion engineering, drives or electrical installation sys-
tems. Totally Integrated Automation (TIA) and Totally In-
tegrated Power (TIP) form the core of our offering. TIA
and TIP are the basis of our integrated range of products
and systems for the manufacturing and process indus-
tries as well as building automation. This portfolio is
rounded off by innovative services over the entire life cy-
cle of your plants.
Learn for yourself the potential our products and sys-
tems offer. And discover how you can permanently in-
crease your productivity with us.
Your regional Siemens contact can provide more infor-
mation. He or she will be glad to help.

Siemens IK PI · 2000
1/41/4 Siemens LV 56 · 2008
Integrated energy distribution
from a single source.
Totally Integrated Power
Totally Integrated Power (TIP) brings together all the components
of electrical energy distribution into an integrated whole. Thus TIP
provides the answer to growing market demands in the planning,
construction and use of utility buildings and industrial buildings.
On the basis of TIP, we offer integrated solutions for energy distri-
bution, from medium voltage to the power outlet. Totally Integra-
ted Power is based here on integration in planning and configu-
ring as well as on perfectly matched products and systems.

1/5Siemens LV 56 · 2008
Totally Integrated Power offers communication
and software modules for connecting the energy
distribution systems to industrial automation and
building automation. This enables the implemen-
tation of significant savings potential.

1/6 Siemens LV 56 · 2008
SIVACON power distribution boards
SENTRON switching devices
SIMARIS software for power distribution
Low-voltage power distribution with
SIVACON, SENTRON and SIMARIS
Non-residental buildings and industrial plants have one thing in
common: without electricity, everything comes to a halt. The avai-
lability, safety and cost effectiveness of the power distribution sys-
tem is of utmost importance – from the medium voltage supply
point through to the socket outlet. And only integrated solutions
can ensure maximum efficiency for planning, configuration and
operation.
The concept is called Totally Integrated Power from Siemens.
Total integration in planning and configuration creates synergies
and saves costs. Perfectly matched products and systems pro-
vide efficient engineering and reliable operation. In the field of
low-voltage power distribution, the following product ranges are
available:
SIVACON: From flexible busbar trunking systems through to safe
power distribution boards and motor control centers.
SENTRON: From well-proven switch disconnectors through to in-
telligent circuit breakers.
Software for power distribution: Everything for dimensioning,
configuring, visualizing and controlling your power distribution.

2SIVACON S4
2/2 Introduction
2/3 General Data
2/6 Technical Data
2/7 Declaration of conformity

2/2 Siemens LV 56 · 2008
SIVACON S4 Power Distribution Boards
2
Introduction
■Front view
SIVACON S4 is an AS (TTA-TSK) switchgear and controlgear
system, type tested according to IEC 60439-1, CEI EN 60439-1,
for installation as primary or secondary boards in industrial and
service sector facilities, including hospitals, shopping centres,
banks, schools. etc. The SIVACON S4 energy distribution
concept consists of a full line-up of boards in galvanised
chromed sheet steel, of sturdy design, suitable for any
installation modality: self-standing, ﬂush or wall-mounted.
SIVACON S4 low-voltage power distribution boards are
constructed according to a modular design system and, by
means of ad hoc assembly kits, can be combined to meet all
power distribution needs.

2/3Siemens LV 56 · 2008
2
■Description
System
SIVACON S4 is a system of low-voltage power distribution
boards, for indoor use, panelled on four sides, suitable for self-
standing or wall-mounted installation.
The cubicle
The constituent elements of the cubicle framework, having a
2.5mm thick profile, are inserted into one another to form a
parallelepiped shaped column. This provides the bearing
structure supporting all add-on interior switchgear components,
i.e., assembly kits, busbar systems, mounting plates, etc. Stable
and rugged construction is ensured through the use of Torx self-
tapping screws. Equipotential and safe grounding of all parts
are also achieved.
The enclosure
Enclosure parts made of galvanised sheet steel are
dimensioned as a function of the cubicle they are fitted to.
Different versions make it possible to achieve various degrees of
protection: IP 30/31, IP 40/41 or IP 55. Walls and doors are
coated with slightly embossed RAL 7035 powder-paint. In
addition to the standard two-way interlocking system, the doors
can be equipped with numerous types of operating mechanism
including rotary handles, with or without locks, to meet any need.
Assembly kit covers are secure by means of captive quick-
release screws. Opening and closing is by rotating the handle
by 1/4 turn. Using the hinge option, the covers may open to the
right or to the left.
Busbar system
The main busbar system of SIVACON S4 offers an appropriate
scaling of rated currents, matched to a rated current of up to
4000 A and short-circuit currents of standard transformers.
It is possible to set up systems with network configurations such
as TN-C, TN-S, IT and TT. Vertical distribution busbar systems
are available as cascaded versions up to 1600 A or non-
cascaded versions up to 2700 A.
Internal separation
Depending on individual requirements, internal partitions are
available from form 1 to form 4.
Assemly kits
For open and enclosed automatic breakers, disconnectors,
SENTRON circuit breakers, modular units as well as contactors,
a wide range of dedicated kits are available. Modular adjustable
mounting plates or plates for electrotechnical use, as well as
dedicated ventilation and air-conditioning components
complete the line-up of parts for the construction of boards as
typically used at industrial facilities or for automation purposes.
The items available include a range of assembly kits for Siemens
Sentron WL and VL circuit breakers, in fixed, plug-in and
drawout versions, as well as kits with DIN rails, according to DIN
43656, for the wide range of the Beta Series modular devices.
• The components of the cubicle and the assembly kits are
made of galvanised chromed sheet.
• The components of the enclosure, such as panels and doors
are coated with slightly embossed RAL 7035 powder-paint.
• Air-conditioning components complete the line-up of
SIVACON S4 system components.
General data

2/4 Siemens LV 56 · 2008
2
General Data
■Applications
Main features
• Type AS (TTA-TSK) power distribution boards according to
CEI EN 60439-1.
• Modular systems supplied loose (supplied as assembly kits
with individually packaged components, including fasteners;
assembly instructions for do-it-yourself installation).
• New design, ventilation and closing system.
• Slightly embossed RAL 7035 powder coating.
• Doors with universal stop.
• Degree of protection IP30, IP31, IP40, IP41, IP55
• Busbar system rated current up to 4000 A
• Busbar system short-circuit current Icw up to 100 kA (1s).
• Busbar system peak current Ipk up to 220 kA.
• Height 2000 mm
• Width 400, 600, 800, 1000, 1200 mm.
• Depth 400, 600, 800 mm.
• Kits for Sentron 3WL, 3VL, 3KA, 3KL circuit breakers, Beta
modular devices on DIN rails.
• Kits of prefabricated bars for Sentron 3WL, 3VL circuit
breakers.
• Internal separation form 1, 2, 3, 4.
• Easy design and conﬁguration with the SCFB software tool.
Construction and testing modalities
All installation and wiring operations must be performed in
keeping with the information and data given in the catalogues
and the assembly manuals.
The installation and individual testing of the low-voltage boards
must be performed according to standards IEC 60439-1 and
CEI EN 60439-1.
Protection of the environment
To the best of our knowledge, our materials do not contain
materials in concentrations or applications prohibited by
directive 2002/95/EC (RoHs).
All the materials used are recyclable.

2/5Siemens LV 56 · 2008
2
■Exploded view
Quick and easy assembly
1
5
13
11
8
9
15
6
7
10
14
4
12
17
18
6
1 Cubicle
2 Base with front covers
3 Base side covers
4 Supporting Structure
5 Blind top plate
6 Side panel with design
7 Giugiaro Design glazed wall
8 Front frame
9 Cable compartment cover
10 Covers for equipment kits
11 Segregation for horizontal busbars
12 Segregation for vertical
distribution busbars
13 Horizontal busbars
14
Vertical distribution busbars,
non-cascaded
15 Real panel
16
Mounting plate for
Sentron VL circuit breaker
17 Blind bottom plate
18 Main grounding bar PE
2
3
16
16
01724

2/6 Siemens LV 56 · 2008
2
Technical Data
■Overview
Standards and regulations Type AS (TTA-TSK) assembled protection and circuit
breakers for low-voltage (L.V. boards)
IEC 60439-1, EN 60439-1
Air clearances and creepage distances Rated impulse withstand voltage (Uimp) 12 kV
Overvoltage category IV
Pollution degree 3
Internal separation forms 1, 2b, 3b,
4a, 4b
Rated insulation voltage (Ui) 1000 V
Rated operational voltage (Ue) Up to 690 V
Rated frequency 50/60 Hz
Rated current (In) of
(3-pole and 4-pole) busbar system
Main horizontal bars Rated current
Rated peak current of busbar
system (Ipk)
Rated short-time current of
busbar system (Icw)
Up to
Up to
Up to
4000 A
220 kA
100 kA, 1s
Protection of people in the event of internal arcs Type tested according to IEC 61641
Degree of protection ≤ IP40, without glazed door
Rated utilisation voltage
Rated short-time current without extra kit
Length of internal arc without extra kit
Length of internal arc with extra kit
400 V
50 kA
100 ms
300 ms
Surface treatment Cubicle, interior components, enclosure
Coated with RAL 7035 powder
Galvanised
Epoxy resin
Cold phosphatised
Thickness of coating
min.
min.
20 µm
RAL 7035
70 µm
Insulation class According to IEC 61140, EN 61140 SK1
Degree of protection According to IEC 60529, EN 60529 IP 30, IP 31, IP 40, IP 41, IP 55
Resistance to mechanical impacts According to IEC 62262, paragraph 9.6 IP 3X
≥ IP 4X
IK08
IK10
Additional static loads on frame components Front frame
Covers
Internal inner door
Internal door / double door
Door module
Exterior covers
revolving
ﬁxed
with quick closing screws, H 50-300mm
with hinges
W 400, 600mm
W 800mm
W 1000, 1200mm
H 150-200mm
H 250-350mm
H 400-800mm
1,0 kg
5,0 kg
0,5 kg
1,0 kg
2,0 kg
0,0 kg
2,5 kg
10,0 kg
5,0 kg
2,5 kg
0,5 kg
1,5 kg
3,0 kg
10,0 kg
Max construction weight According to IEC 62208, paragraph 9.3, 9.4,
Type tested with static load by lifting a cubicle
1200 kg
Operating conditions
Ambient temperature1)
Installation altitude
ȅ 35 °C
ȅ 2000 m
Frame parts: 2.5 mm – Galvanised chromed sheet steel, with 25mm hole pattern according to DIN 43 660
Dimensions Exterior dimensions
Base
Height: 2000 mm
Width: 400, 600, 800, 1000, 1200 mm
Depth: 400, 600, 800 mm
Height: 100, 200 mm
1) For different ambient temperatures and installation altitudes, take into account the appropriate correction factors (see chapter on Planning and Conﬁguration)

2/7Siemens LV 56 · 2008
2
■Overview
Declaration of conformity

2/8 Siemens LV 56 · 2008
2
■Overview
Declaration of conformity

3Standard Configurations
3/2 SIVACON S4 with Sentron 3VL
circuit breakers and modular
devices
3/3 SIVACON S4 with Sentron 3WL
circuit breakers
3/4 SIVACON S4 with Sentron 3VL
circuit breakers
3/5 SIVACON S4 with Sentron 3WL,
3VL circuit breakers and modular
devices

3/2 Siemens LV 56 · 2006
Standard Conﬁgurations
3
SIVACON S4 with Sentron 3VL
circuit breakers and modular devices
■Power distribution board data
Height x Width x Depth 2000mm x 1200mm x 400mm
Height of base, 100mm
Degree of protection IP55
Main busbar system without
Vertical busbar system cascaded 1250 A, 50kA
Front covers, full height door
Internal separation 2b
■Assembly kit
Infeed Sentron 3VL1250, cable entry from
top, terminals for cables,
extended terminal covers
Starters Sentron 3VL,
extended terminal covers, modular
devices
Cubicle, base, Supporting Structure, enclosures
8PQ1202-4BA02 1 Cubicle H2000/B1200/T400
8PQ3000-1BA38 2 Bottom plate partition crossbar
8PQ3000-1BA43 2 Exterior intermediate supporting structure
8PQ1012-0BA01 1 Base H100/B1200
8PQ1010-4BA01 1 Base side covers H100/P400
8PQ2000-6BA04 1 Fixed front frame H1800/B600
8PQ2197-2BA14 1 Cable compartment cover B200
8PQ2197-6BA14 1 IP55 glazed door, right/2-way interlock./H1975/B600
8PQ2197-4BA05 1 IP55 door, left/2-way interlock./H1975/B400
8PQ2302-4BA04 1 Bottom plate IP55/B200/P400
8PQ2302-4BA01 1 Top plate IP55/B1200/P400
8PQ2420-2BA01 1 Rear panel IP55/H2000/B1200
8PQ2520-4BA01 1 Side panel with design/H2000/P400
Busbar system
8PQ4000-0BA32 1 Support for vertical busbars, cascaded, 30x30
8PQ4000-0BA86 8 Copper busbar 30x10/L2000
8PQ4000-0BA85 1 Copper busbar 30x5 /L2000
Kits for switchgear, covers, mounting plates
8PQ2020-6BA02 1 Instrum. cover 4X72x72 + 1 sw./H200/B600
8PQ6000-3BA11 1 Kit for 3VL 7, 3/4 poles, vertical/H600/P600
8PQ2060-6BA03 1 Cover 3VL 7 3/4 poles, vertical/H600 B600
8PQ2020-6BA01 1 Cover H200/B600
8PQ6000-3BA36 1 DIN 24UM/B600 rail assembly kit
8PQ2015-6BA07 1 Cover for modular elements 24UM/H150/B600
8PQ6000-3BA18 2 Assembly kit for 3VL 2, 3, 4 poles, horiz./H200/B600
8PQ2020-6BA04 2 Cover for 3VL 1 3,3, 4 poles, horiz./H200/B600
8PQ6000-2BA87 1 Assembly kit 3VL 4, 4 poles, horiz./H250/B600
8PQ2025-6BA02 1 Cover for 3VL4, horiz. fixed, remov./H250/B600
Kits for switchgear, busbar connection
8PQ6000-1BA64 2 Vertical busbar connection kit for 3VL 3./4p/horiz./fixed
8PQ6000-1BA66 1 Vertical busbar connection kit for 3VL 4 /4p/horiz./fixed
Internal separation
8PQ4000-0BA06 1 Vertical partition for distribution busbars, form 2b H1900/P400
Accessories
8PQ9400-0BA06 1 SIVACON – SIEMENS cubicle ID plate
8PQ3000-0BA38 1 Cable anchoring brackets C30/P400 (600, 800)
8PQ9500-1BA36 1 Flat head square screws DIN 603 M10X55
8PQ9500-0BA05 1 Nuts M10 ISO 4032/M10
8PQ9500-0BA60 1 Clamping washer DIN 6796/10
8PQ9400-0BA02 1 Busbar connect. kit
cable, conductors, small parts, screws, nuts, washers with locking
edges for cable connection
020010200202003

3/3Siemens LV 56 · 2008
3
SIVACON S4 with Sentron 3WL circuit breakers
Height of base 100mm
Main busbar system Standard at top, 3200A, 65kA
Distribution busbar system, vertical cascaded, 2 x 1600A
Front panels, cover
Internal segregation 4b
■Assembly kit
Infeed / starters Sentron 3WL Gr. II, ﬁxed, connection
to distribution busbars.
Cables from top/bottom
Max 12 cables per phase per M12
cable terminal
Cubicle, base, Supporting structure, enclosure
8PQ1208-6BA01 2 Cubicle H2000/ B800/P600
8PQ1204-6BA01 1 Cubicle H2000/B400/P600
8PQ3000-0BA01 2 Interior side upright H1600/P600
8PQ3000-0BA03 1 Interior side upright H1800/P600, 800
8PQ1204-4BA05 2 Board coupling kit
8PQ1018-0BA01 2 Base with front covers H100/B800
8PQ2000-8BA03 1 Exterior cover IP4X/H1975/B400
8PQ2197-8BA11 2 Finishing frame IP3X/H1975/B800
8PQ2308-6BA06 1 Bottom plate IP4X/cables/B800/P600
8PQ2308-6BA03 1 Top plate IP4X/cables/B800/P600
8PQ2308-6BA02 1 Top plate IP4X//B800/P600
8PQ2304-6BA02 1 Top plate IP4X/B400/P600
8PQ2420-8BA02 2 Rear panel IP4X/H2000/B800
8PQ2520-6BA01 1 Side panel with design H2000/P600
Busbar system
8PQ4000-0BA04 2 Main busbars holder 3200 A
8PQ4000-0BA37 1 Flying support (reinforcement)
8PQ4000-0BA82 1 Support for grounding bar PE
8PQ4000-0BA63 2 Support for vertical cascaded busbar /30x40
8PQ4000-0BA74 2 Kit for vertic./horiz. busbars 30x40/P600, 800
8PQ4000-0BA80 2 Copper busbar 40x5 / L2000
8PQ6000-3BA32 2 Kit for 3WL11 12,3/4 poles/fixed H550/B800
8PQ2055-8BA05 2 Cover for 3WL12/4P/H550/B800
8PQ2055-8BA01 2 Cover H550/B800
8PQ2050-8BA01 2 Cover H500/B800
8PQ6000-0BA47 2 prefabricated distribution bars for 3WL1232/fixed/B800
8PQ6000-0BA65 2 prefabricated bars to cables for 3WL 1232/fixed/B800
Internal separation
8PQ3000-0BA54 1 Separation form 2b, main busbars B800/P600
8PQ4000-0BA03 1 Separation form 2b, distribution bars H1900/P600
8PQ4000-0BA07 1 Separation form 2b, distribution bars H1600/P600
8PQ3000-0BA82 2 Partition supporting rail H1600
8PQ5000-0BA10 2 Separation form 3 3WL12/3-4 poles/pull-out/H550/B800
8PQ5000-0BA21 2 Separation form 4 3WL12/3-4 poles/vert. bars/B800
8PQ5000-0BA38 2 Separation form 4 3WL12/3-4 poles/cables/B800
Accessories
8PQ9400-0BA06 1 SIEMENS SIVACON column ID plate
8PQ9400-0BA02 3 Busbar connection kit
8PQ9500-0BA16 1 Flat head screw DIN 603/M10x45
8PQ9500-0BA05 3 Hexagonal nut ISO4032/M10
8PQ3000-0BA73 2 Cable anchoring bracket
8PQ3000-0BA43 2 Cable anchoring bracket C30/B800
020040200502006

3/4 Siemens LV 56 · 2006
3
SIVACON S4 with Sentron 3VL
and modular devices
Distribution busbar system, vertical non-cascaded 630 A, 15kA
Front covers, full height door
Internal separation 1
■Assembly kit
Infeed Sentron 3VL 630, cable entry from
top, terminals for several wires,
extended terminal covers
Starters Sentron 3VL
extended terminal covers, modular
devices
8PQ1206-4BA01 1 Cubicle H2000/ B600/P400
8PQ1208-4BA01 1 Cubicle H2000/B800/P400
8PQ3000-1BA38 1 Bottom plate partition crossbar P400
8PQ3000-1BA42 1 Exterior intermediate upright for covers
8PQ1204-4BA04 1 Switchboard coupling gasket IP55
8PQ2000-2BA01 1 Covers for cable compartment IP3X/H2000/B200
8PQ2197-8BA14 1 IP55 glazed door/right/2-way interlock./H1975/B800
8PQ2197-6BA10 1 IP55 glazed door/left/2-way interlock./H1975/B600
8PQ2308-4BA01 1 Top plate IP55/B800/P400
Busbar system
8GF5763 10 Main busbar holder 30x10.50mm
8PQ3000-1BA42 2 Exterior intermediate upright for covers
8PQ4000-0BA86 8 Copper busbars 30x10/L2000
8PQ4000-0BA83 1 Copper busbars 20x5 / L2000
8PQ2020-6BA02 1 Cover for 4 instruments 1 sw. 72x72 H200/B600
8PQ3000-1BA56 1 Blind mounting plate kit H200/B600
8PQ6000-3BA05 1 Assembly kit for 3VL5 3, 4 poles/vertic. H400/B600
8PQ2040-6BA08 1 Cover for 3VL5 3, 4 poles/vertic./fixed, rim H400/B600
8PQ6000-3BA18 1 Assembly kit for 3VL2 3, 4 poles/horiz./fixed/H200/B600
8PQ2020-6BA04 1 Cover for 3VL1 3, 4 poles/horiz./fixed H200 B600
8PQ2020-6BA12 8 Cover for modular devices, 1 row, 24 UM/H200/B600
8PQ6000-3BA36 8 Modular DIN rails kit. 1 row, 24 UM/B600
8PQ3000-1BA61 1 Modular mounting plate H400/B600
8PQ2040-6BA01 1 Cover H400/B600
8PQ6000-3BA22 2 Assembly kit for 3VL2 3, 4 poles/vertic./fixed/H350/B600
8PQ2035-6BA03 2 Cover for 3VL1 3,4 poles/vertic./fixed, remov. H350/B600
8PQ2005-6BA01 2 Cover H50/B600
Accessories
8PQ3000-0BA73 1 Cable anchoring brackets
8PQ3000-0BA42 1 Cable anchoring brackets C30/B600
8PQ6000-0BA16 1 Horizontal raceway fastening bracket
8PQ9600-0BA01 1 35mm DIN rail for terminal board L1600
020070200802009

3/5Siemens LV 56 · 2008
3
SIVACON S4 with Sentron 3WL,
Sentron 3VL and modular devices
Distribution busbar system, vertical cascaded, 1600A, 50 kA 50mm
System
Front covers, glazed door
Internal separation 4b
■Assembly kit
Infeed Sentron 3WL Gr. I, ﬁxed, central
connection to main busbars, cable
entry from top/bottom
Connector Sentron 3WL, Gr. I, ﬁxed
Starters Sentron 3VL with rear attachments
for cable connection at rear
Modular devices
8PQ1206-6BA01 1 Cubicle H2000/ B600/P600
8PQ1208-6BA01 2 Cubicle H2000/B800/P600
8PQ3000-1BA40 2 Bottom plate partition crossbar P600
8PQ3000-0BA03 3 Interior side upright H1800/P600, 800
8PQ3000-1BA36 2 Interior side upright H1800/P600
8PQ3000-1BA42 2 Exterior intermediate upright
8PQ2000-2BA01 2 Covers for cable compartment IP3X/H2000/B200
Busbar system
8PQ4000-0BA63 2 Support for distribution busbars, cascaded 30x40
8PQ4000-0BA82 1 Support for busbar PE
8GF5762 4 Support for busbars 20x5.50mm
8PQ6000-3BA31 2 Kit for 3WL11 3, 4 poles/3WL12/3p/H550/B600
8PQ2055-6BA07 2 Cover for 3WL11/4p/H550/B600
8PQ6000-2BA87 2 Kit for 3VL4/4p/horiz./H250/B600
8PQ2025-6BA02 2 Cover for 3VL4/4p/horiz./fixed, remov./H250/B600
8PQ6000-3BA18 2 Kit for 3VL2-3, 4 poles/horiz./fixed/H200/B600
8PQ2020-6BA04 2 Cover for 3VL1 3, 4 poles/horiz./fixed, remov./H200/B600
8PQ6000-3BA10 1 Kit for 3VL5 4 poles/horiz./H350/B600
8PQ2035-6BA04 1 Cover for 3VL 5/4poles/horiz./fixed, remov./H350/B600
8PQ6000-3BA36 6 Modular DIN rails kit, 1 row, 24 UM/B600
8PQ2020-6BA12 6 Modular cover, 1 row, 24 UM/B600
8PQ3000-1BA65 1 Modular mounting plate H600/B600
8PQ2040-6BA01 1 Cover H400/B600
8PQ2060-6BA01 1 Cover H600/B600
8PQ2030-6BA01 2 Cover H300/B600
8PQ2025-6BA01 1 Cover H250/B600
0201902020

3/6 Siemens LV 56 · 2006
3
SIVACON S4 with Sentron 3WL,
Sentron 3VL circuit breakers and modular device
8PQ6000-0BA34 3 Distribution busbar connection kit for 3WL11 16/fixed/B600
8PQ6000-0BA52 1 Cable connection kit for 3WL11 16/fixed/B600
8PQ6000-1BA64 2 Distribution busbar connection kit for 3VL3/4p/horiz./fixed
8PQ6000-1BA66 2 Distribution busbar connection kit for 3VL4/4p/horiz./fixed
8PQ6000-1BA68 1 Distribution busbar connection kit for 3VL5/horiz./fixed
Internal separation
8PQ4000-0BA03 2 Separ. form 2b for vertical bars H1900/P600
8PQ3000-0BA83 3 Supporting rail for crossbars and partitions H1800
8PQ5000-2BA61 7 Separ. form 3, horizontal/B600
8PQ5000-2BA57 1 Separ. form 3, vertic./rear/H350/B600
8PQ5000-2BA36 1 Separ. form 3, vertic./later./H350
8PQ5000-2BA30 2 Separ. form 3, vertic./later./..250A/H200
8PQ5000-0BA07 2 Separ. form 3, 3WL11/3, 4 poles/estraib./H550/B600
8PQ5000-0BA30 3 Separ. form 4, 3WL11/3, 4 poles/cables/B600
8PQ5000-0BA14 1 Separ. form 4, 3WL11/3, 4 poles/distribuz./B600
8PQ5000-2BA33 2 Separ. form 3, vertic./later./..400..630A/H250
8PQ9400-0BA03 5 Protective bellows
Accessories
8PQ9400-0BA02 2 Busbar connection kit
8PQ9500-0BA05 2 Hexagonal nut ISO4032/M10
8PQ3000-0BA73 1 Cable anchoring bracket
8PQ3000-0BA42 1 Cable anchoring bracket C30/B800
without screws, nuts and washers with locking edges for cable con-
nection
02021

Siemens LV 56 · 2008Siemens LV 56 · 2008
4Cubicle, Supporting Structure
and Enclosure
4/2 General Data
4/4 Cubicles and Supporting Structure
4/8 Base
4/9 Enclosure

4/2 Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
4
General Data
■Overview
3
1
4
2
1 Cubicle
2 Base with front covers
3 Glazed door Giugiaro Design
4 Rear wall
5
8
5
9
9
10 10
7
6
5 Side panel with design bar
6 Base besides covers
7 Bottom plate
8 Top plate
9 Supporting structure for main busbars
in standard position
10 Supporting structure for main busbars in standard position
and riser compartment 600mm + 200mm
NSE0_01670

4/3Siemens LV 56 · 2008
4
General Data
■Overview
Cross section of possible combinations of cubicles, Supporting
structureand enclosures seen from above.
1
4
2
1 Supporting structure external for cover
2 Internal cover B200
3 Cover frame
4 Cubicle panelling IP3X or5
5 Door IP4X, IP55
02023
1
2
5
3
1
2
1 Supporting structure external for door
2 Outer plate B200, 400 or door B400, 600
3 Cover frame
4 Cubicle panelling IP3X or
5 Door IP4X, IP55
1 Supporting structure external for door
2 Outer plate B200, 400 or door B400, 600
3 Modular door
02022
3
2
2
3
4
02024
2
6
6 Cubicle
6
6 Cubicle
4
4 Cubicle

4/4 Siemens LV 56 · 2008
4
■Description
The cubicle is a framework consisting of vertical and horizontal
sections plus the fasteners necessary to assemble them.
This provides the bearing structure support to all add-on interior
switchgear components. Stable and rugged construction is
achieved through the use of galvanised sections and self-tapping
screws. Equipotential and safe grounding of all constituent parts
are also achieved.
The cubicle uprighte have holes spaced 25 mm apart for
anchoring to the base or the floor. In the upper part these holes
make it possible to fit crossbars, or eyebolts for board handling
purposes.
The installation of interior components, kits, crossbars, supporting
parts, etc., is facilitated by the presence of height, width and
depth locators.
The supporting structure is made up of a vertical section,
crossbars and fastening screws.
In cubicles of various heights and width it ensures segregation
between the equipment compartment and the busbar
compartment, partitioning the cubicles into equipment
compartments and main, or distribution, busbars compartments.
■Configuration
The values quoted below are the external dimensions.
A complete configuration is made of the following elements:
cubicle, bottom plate partition crossbar and supporting structure
for equipment heights of 1600mm or 1800mm.
To assemble two or more cubicles by width or depth, request the
board coupling kit for each coupling point.
– Bottom plate partition not required
+++ Function performed by the cubicle
■Selection and ordering data
Supporting strucutre
Height
mm
Width
mm
Dept
mm
Cubicle Bottom plate
partition
Equipment height
1800 mm 1600 mm
Cubicle and supporting structure with one section
2000 400 400 8PQ1204-4BA01 – +++ 8PQ3000-0BA65
2000 600 400 8PQ1206-4BA01 – +++ 8PQ3000-0BA65
2000 800 400 8PQ1208-4BA01 – +++ 8PQ3000-0BA65
2000 1000 400 8PQ1201-4BA02 8PQ3000-1BA38 +++ 8PQ3000-0BA65
2000 1200 400 8PQ1202-4BA02 8PQ3000-1BA38 +++ 8PQ3000-0BA65
2000 400 600 8PQ1204-6BA01 – 8PQ3000-0BA03 8PQ3000-0BA01
2000 600 600 8PQ1206-6BA01 – 8PQ3000-0BA03 8PQ3000-0BA01
2000 800 600 8PQ1208-6BA01 – 8PQ3000-0BA03 8PQ3000-0BA01
2000 1000 600 8PQ1201-6BA02 8PQ3000-1BA40 8PQ3000-0BA03 8PQ3000-0BA01
2000 1200 600 8PQ1202-6BA02 8PQ3000-1BA40 8PQ3000-0BA03 8PQ3000-0BA01
2000 400 800 8PQ1204-8BA01 – 8PQ3000-0BA03 8PQ3000-0BA02
2000 600 800 8PQ1206-8BA01 – 8PQ3000-0BA03 8PQ3000-0BA02
2000 800 800 8PQ1208-8BA01 – 8PQ3000-0BA03 8PQ3000-0BA02
2000 1000 800 8PQ1201-8BA03 2x 8PQ3000-1BA38 8PQ3000-0BA03 8PQ3000-0BA02
2000 1200 800 8PQ1202-8BA02 2x 8PQ3000-1BA38 8PQ3000-0BA03 8PQ3000-0BA02
01797
02025
02026
02027
Cubicle and supporting structure

4/5Siemens LV 56 · 2008
4
Cubicle and Supporting structure
■Description
The supporting structure external is made up of a vertical
section and the relative fasteners.
The Supporting structure for internal covers constitutes a
cubicle upright that makes it possible to fit a front frame and an
interior cover in front of a cubicle part 200mm in width.
The Supporting strucutre for outer covers/door constitutes two
cubicle uprights and makes it possible to fit modular doors/a front
frame and a door/exterior cover.
■Configuration
A complete configuration is made up of the following elements:
cubicle, bottom plate partition crossbar, supporting structure, for
an equipment height of 1800mm or 1600mm, and an supporting
structure external for the installation of interior covers or an
exterior cover/doors.
For separation forms >1 when using 200mm, 400mm, 600mm
cubicles, as cable compartment or equipment compartment
request an additional supporting structure, see page 4/7.
A combination of supporting structure external for internal covers
and modular doors is not possible.
– not possible
+++ Function performed by the supporting structure external
Interior intermediate side upright Supporting structure external
Height
mm
Width
mm
Depth
mm
Cubicle
partition
Cubicle Bottom plate
crossbar
Equipment height For upgrade
1800 mm 1600 mm Internal covers Door auter covers
Cubicles and Supporting structure with division into two sections
2000 800 400 600+200 8PQ1208-4BA01 8PQ3000-1BA38 +++ 8PQ3000-0BA65
8PQ3000-1BA31
8PQ3000-1BA42 8PQ3000-1BA43
2000 1000 400 600+400 8PQ1201-4BA02 8PQ3000-1BA38 +++ 8PQ3000-0BA65
8PQ3000-1BA31
– 8PQ3000-1BA43
2000 1000 400 800+200 8PQ1201-4BA02 8PQ3000-1BA38 +++ 8PQ3000-0BA65
8PQ3000-1BA31
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 400 600+600 8PQ1202-4BA02 8PQ3000-1BA38 +++ 8PQ3000-0BA65
8PQ3000-1BA31
– 8PQ3000-1BA43
2000 800 600 600+200 8PQ1208-6BA01 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
8PQ3000-1BA42 8PQ3000-1BA43
2000 1000 600 600+400 8PQ1201-6BA02 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
– 8PQ3000-1BA43
2000 1000 600 800+200 8PQ1201-6BA02 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 600 600+600 8PQ1202-6BA02 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
– 8PQ3000-1BA43
2000 800 800 600+200 8PQ1208-8BA01 2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
8PQ3000-1BA42 8PQ3000-1BA43
2000 1000 800 600+400 8PQ1201-8BA03 2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
– 8PQ3000-1BA43
2000 1000 800 800+200 8PQ1201-8BA03 2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 800 600+600 8PQ1202-8BA02 2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
– 8PQ3000-1BA43
01797
02025
02028
02029
02030

4/6 Siemens LV 56 · 2008
4
■Description
The supporting structrure external is made up of a vertical
section and the relative fasteners.
The supporting structure external of internal covers
constitutes a cubicle upright and makes it possible to fit a front
frame and an interior cover in front of a cubicle part 200mm in
width.
The supporting structure external outer cover/doors
constitutes two cubicle uprights and makes it possible to fit
externally modular doors/a front frame and a door/ cover.
■Configuration
A complete configuration is made up of the following elements:
cubicle, bottom plate partition crossbar, side supporting structure
for an equipment height of 1800mm or 1600mm and an
intermediate upright.
The exterior intermediate upright consists of the following
combination of:
2 Supporting structure external for internal covers
or
1 Supporting structure external for internal covers and
1 intermediate upright for exterior cover/door.
or
2 Supporting structure external for outer cover/door
A combination of exterior intermediate upright for interior covers
and modular doors is not possible.
For separation forms >1 when using 200mm, 400mm, 600mm
cubicles, as cable compartment or equipment compartment
request an additional intermediate upright, see page 4/7.
board coupling kit.
+++ Function performed by the exterior supporting structure
Supporting structure Supporting structure external
Height
mm
Width
mm
Depth
mm
Cubicle sub-
division into
sections
Cubicle Bottom plate par-
tition crossbars
Equipment height For upgrade
1800 mm 1600 mm Interior covers Modular doors/ex-
terior covers
Cubicle and supporting structure with subdivision into three sections
2000 1000 400 200+600+200 8PQ1201-4BA02 2x 8PQ3000-1BA38 +++ 8PQ3000-0BA65
2x 8PQ3000-1BA31
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 400 400+600+200 8PQ1202-4BA02 2x 8PQ3000-1BA38 +++ 8PQ3000-0BA65
2x 8PQ3000-1BA31
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 400 200+800+200 8PQ1202-4BA02 2x 8PQ3000-1BA38 +++ 8PQ3000-0BA65
2x 8PQ3000-1BA31
8PQ3000-1BA42 8PQ3000-1BA43
2000 1000 600 200+600+200 8PQ1201-6BA02 2x 8PQ3000-1BA40 8PQ3000-0BA03
2x 8PQ3000-1BA36
8PQ3000-0BA01
2x 8PQ3000-1BA32
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 600 400+600+200 8PQ1202-6BA02 2x 8PQ3000-1BA40 8PQ3000-0BA03
2x 8PQ3000-1BA36
8PQ3000-0BA01
2x 8PQ3000-1BA32
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 600 200+800+200 8PQ1202-6BA02 2x 8PQ3000-1BA40 8PQ3000-0BA03
2x 8PQ3000-1BA36
8PQ3000-0BA01
2x 8PQ3000-1BA32
8PQ3000-1BA42 8PQ3000-1BA43
2000 1000 800 200+600+200 8PQ1201-8BA03 4x 8PQ3000-1BA38 8PQ3000-0BA03
2x 8PQ3000-1BA37
8PQ3000-0BA02
2x 8PQ3000-1BA34
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 800 400+600+200 8PQ1202-8BA02 4x 8PQ3000-1BA38 8PQ3000-0BA03
2x 8PQ3000-1BA37
8PQ3000-0BA02
2x 8PQ3000-1BA34
8PQ3000-1BA42 8PQ3000-1BA43
2000 1200 800 200+800+200 8PQ1202-8BA02 4x 8PQ3000-1BA38 8PQ3000-0BA03
2x 8PQ3000-1BA37
8PQ3000-0BA02
2x 8PQ3000-1BA34
8PQ3000-1BA42 8PQ3000-1BA43
01797
02031
02032
02033
02034
Cubicle supporting structure

4/7Siemens LV 56 · 2008
4
Cubicle and Supporting structure
■Description
The supporting structure is made up of vertical and horizontal
sections and the relative fasteners.
In cubicles of different depths the supporting structure ensures
the creation of equipment and cable compartments and divides
the cubicle into equipment compartment, main or distribution
busbars compartment as well as cable compartment.
■Configuration
For sepation forms 2, 3, 4 when using 200mm, 400mm or 600mm
cubicles, in a cubicle partitioned on the left/right as cable
compartment or equipment compartment, order an supporting
structure kit as an additional component.
1 required only for supporting structure external for internal covers
■Description
The kit for coupling two or more boards by width or depth consists
of fastening plates and screws.
The board coupling gasket kit with degree of protection IP55
consists of a self-adhesive gasket roll.
.
■Configuration
To assemble two or more cubicles by width or depth, request a
For a degree of protection IP55, order an IP55 board coupling
gasket kit as an additional component.
Supporting structure
Height
mm
Depth
mm
Equipment height
1800 mm 1600 mm
Supporting structure
2000 400 8PQ3000-1BA42 1 8PQ3000-1BA31
2000 600 8PQ3000-1BA36 8PQ3000-1BA32
2000 800 8PQ3000-1BA37 8PQ3000-1BA34
02035
02036
Ordering code UI
Board coupling kit
Board coupling by width or depth kit 8PQ1204-4BA05 8PQ1204-4BA05 1
IP55 board coupling gasket 8PQ1204-4BA04 8PQ1204-4BA04 1

4/8 Siemens LV 56 · 2008
4
■Description
The base kit is made of the following elements: corner pieces,
front covers and the relative fasteners.
Ad hoc covers to be order separately are available for the side
covers. The covers of the base are not suitable for board
transport and handling.
For special situations, such as rolling, moving the cubicles on
roller an ad hoc reinforcement kit is available (that can be
applied along the width or the depth of the cubicle as a function
of the direction of movement). Base reinforcements are mounted
internally, at the front, back or side.
■Configuration
For each board, consisting of one or more cubicles, the “side
covers” kit must be ordered once for the H 100 base and twice
for the H 200 base.
Height
mm
Width
mm
Depth
mm
Ordering code UI
Base with front covers
100 400 – 8PQ1014-0BA01 1
100 600 – 8PQ1016-0BA01 1
100 800 – 8PQ1018-0BA01 1
100 1000 – 8PQ1011-0BA01 1
100 1200 – 8PQ1012-0BA01 1
200 400 – 8PQ1024-0BA01 1
200 600 – 8PQ1026-0BA01 1
200 800 – 8PQ1028-0BA01 1
200 1000 – 8PQ1021-0BA01 1
200 1200 – 8PQ1022-0BA01 1
Base covers besides
100 – 400 8PQ1010-4BA01 2
100 – 600 8PQ1010-6BA01 2
100 – 800 8PQ1010-8BA01 2
Base reinforcement
100 – 400 8PQ1014-0BA02 2
100 – 600 8PQ1016-0BA02 2
100 – 800 8PQ1018-0BA02 2
100 400 – 8PQ1014-0BA02 2
100 600 – 8PQ1016-0BA02 2
100 800 – 8PQ1018-0BA02 2
100 1000 – 8PQ1011-1BA01 2
100 1200 – 8PQ1012-2BA01 2
01642017980164301644
Transport with base and lift truck Transport with reinforced base and rollers
01078
01079
Base

4/9Siemens LV 56 · 2008
4
■Description
The front or blind covers of the various assembly kits are
anchored to a “cover frame” by means of quick locking screws
(a hinge kit can be an option to obtain a rotary cover).
A cover frame 1600 or 1800 mm high in ﬁxed or swivel versions
is available. In the frame there is room to house the front covers
of the assembly kits. The rotary mechanism enables the frame to
be rotated over a 180° angle.
This gives full access to the interior components of the board.
■Configuration
The cover frame are available for 600 mm and 800 mm wide
cubicles.
Frame types available:
– H 1600 mm frame for assembly kits with built-in covers for
busbar systems in the upper part and grounding bars in the
lower part.
– H 1800 mm frame for assembly kits. For a rear upper busbar
system, the space available in the upper section is 150 mm
high and only 300 mm deep. This module can be used only
for covers and DIN rail kits for modular units.
For an exact selection, see also the notes in chapter 5 “busbar
systems”.
Height for equipment
mm
Width
mm
Ordering code UI
Fixed cover frame for front main busbars
1600 600 8PQ2000-6BA03 1
1600 800 8PQ2000-8BA03 1
Fixed cover frame without or with rear main busbars
1800 600 8PQ2000-6BA04 1
1800 800 8PQ2000-8BA04 1
Swivel cover frame for front main busbars
1600 600 8PQ2000-6BA02 1
1600 800 8PQ2000-8BA02 1
Swivel cover frame without or with rear main busbars
1800 600 8PQ2000-6BA01 1
1800 800 8PQ2000-8BA01 1
01802018030162601625
Enclosure

4/10 Siemens LV 56 · 2008
4
Enclosure
■Description
For 600mm and 800mm wide cubicles with front frame, cubicle
panelling are available as an alternative to doors.
With its thickness, the finishing frame ensures the same height
as an adjacent door, as well as the same height of the cover of
the uprights of the galvanised chromed cubicle.
Cubicle panelling, covers and finishing frame achieve a degree
of protection of IP30/31.
■Configuration
For use only in conjunction with a front frame.
Only for 600mm and 800mm wide cubicles.
Height Width
mm
Degree
of protection
Ordering code UI
Cubicle panelling
Cubicle height 600 IP30 8PQ2197-6BA11 1
01636
■Description
A outer cover can be instead a door of 200mm and 400mm wide
compartments.
The kit includes a painted cover, a green column identification
strip, an anchoring support and the relative fasteners. This cover
must be used in conjunction with the cover frame or as an
alternative to the door.
■Configuration
The covers can be can be mounted as desired on the front or the
back of the cubicle.
For use only in conjunction with the supporting structure external
for outer covers/door.
Height cover Width
mm
Degree
of protection
Ordering code UI
Outer cover
01663
■Description
For 200mm wide cubicle sections, an internal cover that can be
mounted behind the door is available.
The kit is made up of a cover, an anchoring support and
fasteners. This cover must be used in conjunction with a cover
frame and can be placed behind the door.
■Configuration
When a 200mm section is produced in a cubicle, this section
can be placed indifferently on the left or the right side, and is
closed with an interior cover.
For use only in conjunction with an supporting structure externa
for internal covers.
Height of cover Width
mm
Degree
of protection
Ordering code UI
Internal cover for 200mm section
01799

4/11Siemens LV 56 · 2008
4
Enclosure
■Description
The SIVACON S4 door kit is made up of Giugiaro Design glazed
doors or metal plate doors, a green column identification strip,
hinges and preassembled bar lock closing system with two-way
interlocking mechanism.
The two-way interlocking mechanism can be replaced with a
rotary handle (standard doors are not suitable for semi-
cylindrical profiles).
Thanks to the new hinge and locking system, the door hinges
can be fitted either on the left or the right.
The position of the hinges can be easily modified at a later stage.
If it is deemed necessary to fit a closing system with rotary
handle and semi-cylindrical profile with security key, on account
of cylinder depth, a series of dedicated doors with right or left
side hinges are available.
■Configuration
Standard version doors use a 3mm two-way interlocking system.
The doors can be mounted indifferently to the front or back of the
cubicle.
In cubicles with degree of protection IP40 the top plate, the
doors and the rear wall must have the same degree of
protection.
Door type Doorheight
mm
Door width
mm
Degree of
protection
Hinge position Ordering code UI
Cubicle door with two-way interlocking system
Finned plate door 1975 400 IP40 left 8PQ2197-4BA08 1
Finned plate door 1975 400 IP40 right 8PQ2197-4BA11 1
Plate door 1975 400 IP55 left 8PQ2197-4BA05 1
Plate door 1975 400 IP55 right 8PQ2197-4BA10 1
Glazed door 1975 600 IP55 left 8PQ2197-6BA10 1
Glazed door 1975 600 IP55 right 8PQ2197-6BA14 1
016350163301634

4/12 Siemens LV 56 · 2008
4
■Description
The SIVACON S4 door kit is made up of Giugiaro Design glazed
doors or metal doors, a green column identification strip, hinges
and preassembled bar lock closing system with rotary handle
mechanism for semi-cylindrical profile.
■Configuration
Standard version doors use a two-way interlocking mechanism.
Semi-cylindrical profile: see chapter s10 “Accessories”.
The doors can be mounted indifferently to the front or back of the
cubicle.
The hinges for double doors are hooked onto the cubicle
externally.
The double doors of 1000mm wide cubicles are split into a
600mm left section and a 400mm right section. Opening
sequence: right and then left.
The double doors of 1200mm wide cubicles are split 50/50.
Opening sequence: right and then left.
In cubicles with degree of protection IP40, the top plate, the
doors and the rear wall must have the same degree of
protection.
Door type Doorheight
mm
Door width
mm
Degree of
protection
Hinge position Ordering code UI
Door with rotary handle for semi-cylindrical profile DIN 18252/18254, 8 x 45°
Double door with two-way interlocking mechanism
Finned plate door 1975 1000 IP40 – 8PQ2197-1BA14 1
Plate door 1975 1000 IP55 – 8PQ2197-1BA13 1
Double door with rotary handle for semi-cylindrical profile
0180401805018060169601698
Enclosure

4/13Siemens LV 56 · 2008
4
Enclosure
■Description
The inner door kit includes a door and hinges. The inner door is
mounted behind the main cubicle door and in front of the large-
sized mounting plate for electrotechnical applications.
■Configuration
The inner door requires a depth of 30 mm and cannot be used
in conjunction with a cover frame.
Height Width
mm
Ordering code UI
Inner door
Cubicle height 600 8PQ2000-6BA05 1
01699

4/14 Siemens LV 56 · 2008
4
Enclosure
1) Lieferbar ab 02/2007.
■Description
Bottom plates are available with degree of protection IP55
without cable entry opening and with degree of protection IP40
with variable cable entry opening.
■Configuration
For 800mm wide cubicles, order two 400mm deep bottom
plates.
For 800mm, 1000mm, 1200mm wide cubicles, bottom plate
selection depends on the combination of variants
corresponding to cubicle subdivision.
Width
mm
Depth
mm
Degree
of protection
Ordering code UI
Bottom plate without cable entry
200 400 IP55 8PQ2302-4BA04 1
400 400 IP55 8PQ2304-4BA05 1
600 400 IP55 8PQ2306-4BA05 1
800 400 IP55 8PQ2308-4BA05 1
200 600 IP55 8PQ2302-6BA04 1
400 600 IP55 8PQ2304-6BA05 1
600 600 IP55 8PQ2306-6BA05 1
800 600 IP55 8PQ2308-6BA05 1
Bottom plate with variable cable entry
400 400 IP40 8PQ2304-4BA06 1
600 400 IP40 8PQ2306-4BA06 1
800 400 IP40 8PQ2308-4BA06 1
400 600 IP40 8PQ2304-6BA06 1
600 600 IP40 8PQ2306-6BA06 1
800 600 IP40 8PQ2308-6BA06 1
01631
01632

4/15Siemens LV 56 · 2008
4
Enclosure
■Description
Top plates are available with degree of protection IP55 and IP40
without cable entry opening. A version with degree of protection
IP40 with variable cable entry opening is also available. The top
plates with degree of protection IP55 are secured with screws on
one side and snap into the board structure on the other. By
means of a further upgrade, degree of protection IPX1 can be
achieved.
■Configuration
For cubicles with degree of protection IP 40, the top plates, the
bottom plates, the doors and the panels must have the same
degree of protection IP 40.
With the IPX1 upgrade, cubicles with degree of protection IP30
and IP40 can achieve degree of protection IP31 and IP41
respectively. Column height is increased by 62 mm.
Width
mm
Depth
mm
Degree
of protection
Ordering code UI
Top plate without cable entry
400 400 IP40 8PQ2304-4BA02 1
400 600 IP40 8PQ2304-6BA02 1
400 800 IP40 8PQ2304-8BA02 1
600 400 IP40 8PQ2306-4BA02 1
600 600 IP40 8PQ2306-6BA02 1
600 800 IP40 8PQ2306-8BA02 1
800 400 IP40 8PQ2308-4BA02 1
800 600 IP40 8PQ2308-6BA02 1
800 800 IP40 8PQ2308-8BA02 1
1000 400 IP40 8PQ2301-4BA02 1
1000 600 IP40 8PQ2301-6BA02 1
1000 800 IP40 8PQ2301-8BA02 1
1200 400 IP40 8PQ2302-4BA02 1
1200 600 IP40 8PQ2302-6BA02 1
1200 800 IP40 8PQ2302-8BA02 1
400 400 IP55 8PQ2304-4BA01 1
400 600 IP55 8PQ2304-6BA01 1
400 800 IP55 8PQ2304-8BA01 1
600 400 IP55 8PQ2306-4BA01 1
600 600 IP55 8PQ2306-6BA01 1
600 800 IP55 8PQ2306-8BA01 1
800 400 IP55 8PQ2308-4BA01 1
800 600 IP55 8PQ2308-6BA01 1
800 800 IP55 8PQ2308-8BA01 1
1000 400 IP55 8PQ2301-4BA01 1
1000 600 IP55 8PQ2301-6BA01 1
1000 800 IP55 8PQ2301-8BA01 1
1200 400 IP55 8PQ2302-4BA01 1
1200 600 IP55 8PQ2302-6BA01 1
1200 800 IP55 8PQ2302-8BA01 1
Top plate with cable entry
400 400 IP40 8PQ2304-4BA03 1
400 600 IP40 8PQ2304-6BA03 1
400 800 IP40 8PQ2304-8BA03 1
600 400 IP40 8PQ2306-4BA03 1
600 600 IP40 8PQ2306-6BA03 1
600 800 IP40 8PQ2306-8BA03 1
800 400 IP40 8PQ2308-4BA03 1
800 600 IP40 8PQ2308-6BA03 1
800 800 IP40 8PQ2308-8BA03 1
Top plate upgrade for IPX1
400 400 IPX1 8PQ2304-4BA04 1
400 600 IPX1 8PQ2304-6BA04 1
400 800 IPX1 8PQ2304-8BA04 1
600 400 IPX1 8PQ2306-4BA04 1
600 600 IPX1 8PQ2306-6BA04 1
600 800 IPX1 8PQ2306-8BA04 1
800 400 IPX1 8PQ2308-4BA04 1
800 600 IPX1 8PQ2308-6BA04 1
800 800 IPX1 8PQ2308-8BA04 1
1000 400 IPX1 8PQ2301-4BA03 1
1000 600 IPX1 8PQ2301-6BA03 1
1000 800 IPX1 8PQ2301-8BA03 1
1200 400 IPX1 8PQ2302-4BA03 1
1200 600 IPX1 8PQ2302-6BA03 1
1200 800 IPX1 8PQ2302-8BA03 1
01628
01627
01630
01629

4/16 Siemens LV 56 · 2008
4
Enclosure
■Description
Rear panels are available with degrees of protection IP40 and
IP55. Rear panels with degree of protection IP40 are galvanised
chromed, and those with degree of protection IP55 are slightly
embossed, RAL 7035 powder-coated.
■Configuration
For cubicles with degree of protection IP 40, the top plates, the
bottom plates, the doors and the rear panels must have the
same degree of protection IP 40.
■Description
The side panels are powder-coated and are available with
degree of protection IP 55, with or without Design bar.
■Configuration
For each board, order one kit of side panels.
Width
mm
Depth
mm
Degree
of protection
Ordering code UI
Rear panel
2000 400 IP40 8PQ2420-4BA02 1
2000 600 IP40 8PQ2420-6BA02 1
2000 800 IP40 8PQ2420-8BA02 1
2000 1000 IP40 8PQ2420-1BA02 1
2000 1200 IP40 8PQ2420-2BA02 1
2000 400 IP55 8PQ2420-4BA01 1
2000 600 IP55 8PQ2420-6BA01 1
2000 800 IP55 8PQ2420-8BA01 1
2000 1000 IP55 8PQ2420-1BA01 1
2000 1200 IP55 8PQ2420-2BA01 1
0178901637
Width
mm
Depth
mm
Degree
of protection
Ordering code UI
Side panel with design
2000 400 IP55 8PQ2520-4BA01 2
2000 600 IP55 8PQ2520-6BA01 2
2000 800 IP55 8PQ2520-8BA01 2
Side panel without design
2000 400 IP55 8PQ2520-4BA02 2
2000 600 IP55 8PQ2520-6BA02 2
2000 800 IP55 8PQ2520-8BA02 2
0164001639

Siemens LV 56 · 2008Siemens LV 56 · 2008
5Busbar System
5/2 General Data
5/3 Main busbar system
5/7 Vertical distribution busbar
system
5/11 Compact busbar systems
5/13 Copper bars
5/14 Busbar connection fasteners

5/2 Siemens LV 56 · 2008
Busbar System
5
General Data
■Overview
2
1
4
3
1 System of main busbar with
rectangular profile
2 Main busbar extension kit
3 Grounding bar PE
4 Busbar holder
5
5 Reinforcement
4
01676

5/3Siemens LV 56 · 2008
Busbar System
5
Main busbar system
■Technical specifications
Admissible rated current for main busbar systems
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h average).
In different operating conditions, the correction factors given in the “Planning and Configuration” chapter have to be taken into account.
Cross-sections for PE conductor
The cross-sections specified for PE conductors were type tested according to IEC 60439-1. According to IEC 60439-1 a PE conductor cross-section corresponding to
25% the cross-section of main conductors is also admissible.
Determination of the number of reinforcements as a function of short-circuit current and cubicle width
1) The number of reinforcements applies to a main busbar system. Since the 3700 A and 4000 A main busbar system is made up of two systems mounted in parallel,
the number of reinforcements to be ordered must be doubled.
For the determination of the distances between busbar holders and reinforcements, refer to the SIVACON S4 Manual.
No. of bars per phase Dimensions
[mm]
Rated current at an ambient temperature of 35 °C
Depth of cubicle 400mm Depth of cubicle 600mm Depth of cubicle 800mm
IP ≤ IP41 IP 55 IP ≤ IP41 IP 55 IP ≤ IP41 IP 55
2 20 × 10 1190 965 1190 965 1190 965
2 30 × 10 1630 1310 1630 1310 1630 1310
4 20 × 10 1920 1420 1920 1540 1930 1650
4 30 × 10 2460 1790 2490 1950 2510 2110
4 40 × 10 2980 2150 3040 2350 3100 2560
4 50 × 10 3220 2330 3320 2570 3410 2820
2 × 4 20 × 10 3700 3000
2 × 4 30 × 10 4660 3680
No. of bars Dimensions
[mm]
Icw
1s
2 20 × 5 65 kA
2 30 × 5 85 kA
2 40 × 5 100 kA
2 30 × 10 100 kA
Busbar cross-section Width [mm] No. of reinforcements as a function of Ipk, Icw and cubicle width
No of bars Dimensions
[mm]
Icw = 25 kA
Ipk = 52,5 kA
Icw = 35 kA
Ipk = 73,5 kA
Icw = 50 kA
Ipk = 105 kA
Icw = 65 kA
Ipk = 143 kA
Icw = 85 kA
Ipk = 187 kA
Icw = 100 kA
Ipk = 220 kA
2 20 × 10 400 0 0
600 0 0
800 1 1
1000 1 1
1200 2 2
2 30 × 10 400 0 0
600 0 1
800 1 1
1000 1 2
1200 2 2
4 20 × 10 400 0 0 0
600 0 0 1
800 1 1 2
1000 2 2 3
1200 2 2 3
4 30 × 10 400 0 0 0 0
600 0 0 1 1
800 1 1 2 2
1000 2 2 3 3
1200 2 2 3 3
4 40 × 10 400 0 0 0 0
600 0 0 1 1
800 1 1 2 2
1000 1 1 3 3
1200 2 2 3 4
4 50 × 10 400 0 0 0 0
600 0 0 1 1
800 1 1 2 2
1000 1 1 3 3
1200 2 2 3 4
2 × 4 1 20 × 10 400 0 0 0
600 1 1 1
800 2 2 2
1000 3 3 3
1200 4 4 4
2 × 4 1 30 × 10 400 0 0 0
600 1 1 1
800 2 2 2
1000 3 3 3
1200 4 4 4

5/4 Siemens LV 56 · 2008
Busbar System
5
■Description
The main busbar system of SIVACON S4 offers an appropriate
scaling of rated currents, matched to the rated currents of
standard version circuit breakers and transformers.
The busbar holders have been designed for the use of
rectangular copper proﬁles.
By using 2, 4 or 8 sub-conductors per phase, it is possible to
achieve high resistance to short-circuits and make the
connections without having to drill holes. This arrangement also
simplify handling of one or more cubicles.
The main horizontal busbar system provides for a variety of
network conﬁgurations such as TN-C, TN-S, IT and TT.
The connection of the PE bar to the cubicle is type-tested
(resistance to short-circuits) and ensures a safe transfer of fault
currents to the cubicle.
For TN-C network systems, a type-tested connection (PEN
jumper) between the PEN bar and the cubicle is available.
■Configuration
SIVACON S4 main busbar system in standard position
- Installation position: front top
- Cubicle depth 600 mm
- Rated current up to 3200 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules
- Installation position: front rear
- Front frame for 1600mm high modules or
- Front frame for 1800mm high modules mm; the 150mm high upper module must be used only to fit the front cover
- Installation position: front top and rear (double upper system)
SIVACON S4 main busbar system in optional position
- Installation position: at different heights at rear
- Side upright for 1800 mm high modules
- Front frame for 1800 mm high modules
- To position the busbars at an optional height other than in the upper part of the cubicle, order two 350mm long crossbars per
cubicle
Main busbar system with PEN jumper
- The PEN jumper establishes the connection between the PEN bar and the cubicle. 1 PEN jumper per cubicle is required
PE bar connection
- The connection of the PE bar to the cubicle is included in the main busbar kit
0170201703017040170501701016920170601710
Main busbar system

5/5Siemens LV 56 · 2008
Busbar System
5
The number of reinforcements to be used depends on the value of the short-circuit current and cubicle width.
The additional internal arc protection kit is required for arcing times of between 100 ms and 300 ms. Order one kit per side panel.
Dimensions
mm × mm
Ordering code UI
Main busbar holder kit up to 3200 A, with PE grounding bar connection to cubicle
20 × 10, 30 × 10, 40 × 10, 50 × 10 8PQ4000-0BA04 2
Main busbar holder kit up to 4000 A, with PE grounding bar connection to cubicle
20 × 10, 30 × 10, 40 × 10, 50 × 10 8PQ4000-0BA60 2
Busbar reinforcement kit
20 × 10, 30 × 10, 40 × 10, 50 × 10 8PQ4000-0BA37 1
Additional internal arc protection kit
8PQ9400-0BA21 2
02037
1
2
1 1
2
1 1
2
1
Single-cubicle transport unit
02038
Multi-cubicle transport unit
1
2
1
2
1
2
1
Main busbar holder1
Reinforcement2
01685016860168702039
Main busbar systems

5/6 Siemens LV 56 · 2008
Busbar System
5
Dimensions
mm × mm
Ordering code UI
Main busbars extension kit for L1, L2, L3, N or PEN1
20 × 10 8PQ4000-0BA53 4
30 × 10 8PQ4000-0BA54 4
40 × 10 8PQ4000-0BA56 4
50 × 10 8PQ4000-0BA57 4
Extension kit for PE grounding bar
20 × 5, 30 × 5, 30 × 10 8PQ4000-0BA52 2
40 × 5, 40 × 10, 50 × 10 8PQ4000-0BA67 2
Connection kit for double main busbar system 1
(order 1 per cubicle; cannot be installed in 400mm wide cubicles)
– 8PQ4000-0BA62 1
PEN jumper for main busbar system1
– 8PQ4000-0BA12 10
PE bar connection to cubicle (accessory)
– 8PQ4000-0BA82 6
0167401673017900170601710
Main busbar system
1) Without screws, washers and nuts.

5/7Siemens LV 56 · 2008
Busbar System
5
Vertical distribution busbar system
■Overview
Cascaded distribution busbar system with profiled
busbars
Single arrangement
Cascaded distribution busbar system with rectan-
gular bars
Single arrangement
Non-cascaded distribution busbars system with
regular busbars
Single arrangement
Cascaded distribution busbar system with profiled
busbars
Double arrangement, side-by-side
Cascaded distribution busbar system with rectan-
gular bars
Double arrangement, aligned
Non-cascaded distribution busbar system with
rectangular bars
Double arrangement, aligned
02040
02041
02042
02043
02044
02045

5/8 Siemens LV 56 · 2008
Busbar System
5
Admissible rated current values for cascaded vertical distribution busbars
The rated sort-time current Icw for a cascaded vertical
busbar system is determined on the basis of no. of busbars,
busbar size and shape, and the number of busbar
holders.
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h average).
Admissible rated current values for non-cascaded vertical distribution busbars
The rated sort-time current Icw of a non-cascaded vertical
busbar system is determined on the basis of no. of busbars,
busbar size, and number of reinforcements.
For each cubicle, order one kit (3 pcs.) of non-cascaded busbar
holders.
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h
average).
[mm]
Admissible current for
a temperature of 35 °C
No. of holders per cubicle and per system
IP ≤ IP41 IP 55 Icw = 25 kA
Ipk = 52,5 kA
Icw = 35 kA
Ipk = 73,5 kA
Icw = 50 kA
Ipk = 105 kA
Icw = 65 kA
Ipk = 143 kA
Icw = 85 kA
Ipk = 187 kA
1 30 × 10 922 837 4 4
1 40 × 10 1100 980 4 4
2 30 × 10 1530 1337 4 4 4 5
2 40 × 10 1651 1543 4 4 4 5
Profiled busbar 30 × 30 1289 1066 4 4 4 5
Profiled busbar 40 × 30 1518 1217 4 4 4 5
2 x 2 30 × 10 3060 2674 4 5 8
2 x 2 40 × 10 3302 3086 4 5 8
2 x Profiled busbar 30 × 30 2578 2132 4 5 8
2 x Profiled busbar 40 × 30 3036 2434 4 5 8
[mm]
Admissible current for a
temperature of 35 °C
No. of reinforcements per cubicle
IP ≤ IP41 IP 55 Icw = 25 kA
Ipk = 52 kA
Icw = 35 kA
Ipk = 73 kA
Icw = 50 kA
Ipk = 105 kA
Icw = 65 kA
Ipk = 143 kA
Icw = 85 kA
Ipk = 187 kA
Icw = 100 kA
Ipk = 220 kA
2 20 × 10 1010 820 0 0
2 30 × 10 1390 1110 0 0 2
4 20 × 10 1630 1207 0 0 2 2
4 30 × 10 2091 1520 0 0 2 2 2
4 40 × 10 2533 1825 0 0 0 2 2 4
4 50 × 10 2737 1980 0 0 0 2 2 4

5/9Siemens LV 56 · 2008
Busbar System
5
■Configuration
Cascaded vertical distribution busbar system
For proﬁled busbars, the connections are made by
means of T-head screws. When using rectangular busbars,
the connections are made by means of screws
and connection kits.
Busbar dimensions
mm × mm
Busbar shape Cubicle
width
mm
Cubicle
depth
mm
Position of
main busbars
Position of
vertical distri-
bution bus-
bars
Ordering code UI
Busbar holder kit for cascaded vertical distribution busbars
40 × 30 Profiled busbar 200 – – – 8PQ4000-0BA63 4
40 × 10 Rectangular
busbar
200 – – – 8PQ4000-0BA63 4
30 × 30 Profiled busbar 200 – – – 8PQ4000-0BA32 4
30 × 10 Rectangular
busbar
200 – – – 8PQ4000-0BA32 4
Busbar holder kit for non-cascaded vertical distribution busbars
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
200 – – – 8PQ4000-0BA77 3
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
400 – – – 8PQ4000-0BA31 3
Busbar reinforcement kit
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
– – – – 8PQ4000-0BA37 1
End support for non-cascaded vertical busbars
– – 200 – – – 8PQ4000-0BA78 1
– – 400 – – – 8PQ4000-0BA61 1
Anchoring support for N or PE bars in cable compartment
– – – – – – 8PQ4000-0BA11 4
0169001688016870168901707

5/10 Siemens LV 56 · 2008
Busbar System
5
Bus bar dimensions
mm × mm
Busbar shape Cubicle
width
mm
Cubicle
depth
mm
Position of
main busbars
Position of
vertical distri-
bution bus-
bars
Ordering code UI
Connection kit between cascaded vertical busbars/horizontal busbars 1
30 × 30, 30 × 10 – – 400 front right 8PQ4000-0BA45 1
40 × 30, 40 × 10 – – 400 front right 8PQ4000-0BA47 1
30 × 30, 30 × 10 – – 600, 800 front right 8PQ4000-0BA46 1
40 × 30, 40 × 10 – – 600, 800 front right 8PQ4000-0BA48 1
30 × 30, 30 × 10 – – 800 rear right 8PQ4000-0BA50 1
40 × 30, 40 × 10 – – 800 rear right 8PQ4000-0BA51 1
30 × 30, 30 × 10 – – 400 front left 8PQ4000-0BA73 1
40 × 30, 40 × 10 – – 400 front left 8PQ4000-0BA75 1
30 × 30, 30 × 10 – – 600, 800 front left 8PQ4000-0BA72 1
40 × 30, 40 × 10 – – 600, 800 front left 8PQ4000-0BA74 1
30 × 30, 30 × 10 – - 800 rear left 8PQ4000-0BA70 1
40 × 30, 40 × 10 – - 800 rear left 8PQ4000-0BA71 1
Connection kit between non-cascaded vertical busbars/horizontal busbars1
20 × 10, 30 × 10 – – 400 front – 8PQ4000-0BA38 1
40 × 10, 50 × 10 – – 400 front – 8PQ4000-0BA41 1
20 × 10, 30 × 10 – – 600, 800 front – 8PQ4000-0BA40 1
40 × 10, 50 × 10 – – 600, 800 front – 8PQ4000-0BA42 1
20 × 10, 30 × 10 – – 800 rear – 8PQ4000-0BA43 1
40 × 10, 50 × 10 – – 800 rear – 8PQ4000-0BA44 1
Busbar clamp kit for M10 screw
– – – – – – 8PQ9400-0BA02 20
017180167501743
1) without screws, washers and nuts

5/11Siemens LV 56 · 2008
Busbar System
5
Compact busbar system
■Overview
Compact busbar systems may be arranged as desired with uprights and crossbars.
02046
02047
Compact busbar systems 8GF57
non-cascaded, anchored to crossbars
Compact busbar systems 8GF57
cascaded, anchored to crossbars
5
1
3
5
2
4
Crossbars for anchoring depth-wise4
Supporting structure5
Non-cascaded busbar support1
Cascaded busbar support2
Crossbars for anchoring width-wise3

5/12 Siemens LV 56 · 2008
Busbar System
5
Compact busbar system
Admissible rated current for copper busbars, for an ambient temperature of 35 °C according to DIN 43671
■Description
Compact busbar systems are used for the distribution of
currents up to 630A and rated short-time currents Icw upto 25
kA.
■Configuration
Compact busbar systems, with pole centre distance of 50mm,
can be used in conjunction with the rapid wiring assembly
system for modular devices SIKclip.
For compact busbar systems, with pole centre distance of
60mm, a wide range of adapters for SIRIUS, SENTRON 3VL is
available together with many other accessories.
No. of busbars Dimensions
[mm]
Rated current at a temperature of Holder spacing [mm]
65 °C 85 °C 105 °C Icw = 5 kA Icw = 10 kA Icw = 15 kA Icw = 20 kA Icw = 25 kA
1 15 × 5 222 293 349 600 400
1 20 × 5 274 362 430 600 600 400
1 30 × 5 379 500 595 600 600 450 352 300
1 30 × 10 573 756 900 600 600 400 300 250
Description No. of
poles
Busbar dimensions
mm × mm
Busbar shape Arrangement Ordering code UI
Compact busbar system, 50mm pole centre distance
Busbar holder 4 15 × 5, 20 × 5, 30 × 5 Rectangular non-cascaded 8GF5762 1
Busbar holder 4 30 × 10 Rectangular non-cascaded 8GF5763 1
Busbar holder 4 15 × 5, 20 × 5, 30 × 5 Rectangular cascaded 8GF5760 1
Busbar holder 4 30 × 10 Rectangular cascaded 8GF5761 1
Compact busbar holder system, 60mm pole centre distance
Busbar holder 3 15 × 5, 20 × 5, 30 × 5, 30 × 10 Rectangular non-cascaded 8US1923-3AA01 1
Busbar holder 4 15 × 5, 20 × 5, 30 × 5, 30 × 10 Rectangular non-cascaded 8US1923-4AA00 1
Busbar holder end cover 3 – – – 8US1922-1AC00 1
Busbar holder end cover 4 – – – 8US1922-1AB00 1
Busbar cover section – 20 × 5, 30 × 5 Rectangular – 8US1922-2AA00 1
Busbar cover section – 20 × 10, 30 × 10 Rectangular – 8US1922-0BA00 1
0204802049
Bild5-9BUS1Bild5-9BUS2
Bild 5-9 BUS 3

5/13Siemens LV 56 · 2008
Busbar System
5
Dimensions
mm × mm
Threading Current
A
∆ T
K
Length
mm
Ordering code UI
Rigid busbar, perforated, with threading
15 × 5 M6 – – 2000 8GF5751 1
20 × 5 M6 – – 2000 8GF5737 1
30 × 5 M6 – – 2000 8GF5742 1
Rigid busbar, perforated
40 × 5 for M10 – – 2000 8PQ4000-0BA81 1
60 × 5 for M10 – – 1750 8PQ4000-1BA05 1
80 × 5 for M10 – – 2000 8PQ4000-1BA06 1
100 × 5 for M10 – – 2000 8PQ4000-1BA07 1
30 × 10 for M10 – – 2000 8GF5752 1
40 × 10 for M10 – – 2000 8PQ4000-0BA24 1
Rigid busbar
20 × 5 – – – 2000 8PQ4000-0BA83 1
30 × 5 – – – 2000 8PQ4000-0BA85 1
40 × 5 – – – 2000 8PQ4000-0BA80 1
15 × 10 – – – 2000 8PQ4000-1BA04 1
20 × 10 – – – 2000 8PQ4000-0BA84 1
30 × 10 – – – 2000 8PQ4000-0BA86 1
40 × 10 – – – 2000 8PQ4000-0BA17 1
50 × 10 – – – 2000 8PQ4000-0BA18 1
60 × 10 – – – 2000 8PQ4000-0BA87 1
80 × 10 – – – 2000 8PQ4000-0BA88 1
100 × 10 – – – 2000 8PQ4000-1BA00 1
120 × 10 – – – 2000 8PQ4000-1BA01 1
PVC insulated flexible busbar
13 × 3 × 0,5 – 160 20 2000 8GF5680 1
13 × 3 × 0,5 – 160 40 2000 8GF5686 1
20 × 5 × 1 – 250 20 2000 8GF5681 1
16 × 4 × 0,8 – 250 40 2000 8GF5687 1
32 × 5 × 1 – 400 20 2000 8GF5682 1
24 × 4 × 1 – 400 40 2000 8GF5688 1
40 × 8 × 1 – 630 20 2000 8GF5683 1
40 × 5 × 1 – 630 40 2000 8GF5690 1
40 × 10 × 1 – 800 30 2000 8PQ4000-1BA03 1
40 × 10 × 1 – 1000 40 2000 8PQ4000-1BA03 1
40 × 10 × 1 – 1250 50 2000 8PQ4000-1BA03 1
50 × 10 × 1 – 1250 20 2000 8PQ4000-1BA02 1
Rigid busbar, H shaped
30 × 30 – – – 1610 8PQ4000-0BA27 4
40 × 30 – – – 1610 8PQ4000-0BA26 4
0167901679016780168001677
Copper bars

5/14 Siemens LV 56 · 2008
Busbar System
5
■Description
To ensure a reliable connection of the copper busbars, it is
important to select quality fasteners, of the right size, suitable
and appropriately treated for the task.
The table below provides an overview of the various copper
busbars - fasteners combination options, so as to facilitate
selection and ordering.
■Configuration
The stated quantity of fasteners applies to a 4-pole
arrangement.
Rules for the calculation of the screw length for different busbar
dimensions:
– Length of screw with M8 threading = busbars proﬁle + 15 mm
– Length of screw with M10, M12 threading = busbars proﬁle +
20 mm
Profile Dimensions
mm × mm
Quan-
tity
Ordering code Description
Main busbar systems with 2 bars per phase
Connection from
main busbars to:
Cascaded vertical
busbars
Profiled busbar 30 × 30, 40 × 30 4 8PQ9500-0BA14 DIN 603 - M10x35 non-cascaded square screw
8 8PQ9500-0BA01 M10x25 T-head screw
12 8PQ9500-0BA60 DIN 6796 10 clamping washer
12 8PQ9500-0BA05 Hexagonal nut ISO 4032 M10
Rectangular busbar 2 × 30 × 10 4 8PQ9500-0BA14 DIN 603 - M10x35 non-cascaded square screw
8 8PQ9500-1BA36 DIN 603 - M10x55 non-cascaded square screw
8 8PQ9400-0BA02 Rail clamp
12 8PQ9500-0BA60 DIN 6796 - 10 clamping washer
12 8PQ9500-0BA05 ISO 4032 - M10 hexagonal nut
Non-cascaded
vertical busbars
Rectangular busbar 2 × 20 × 10, 2 × 40 × 10 12 8PQ9500-0BA14 DIN 603 - M10x35 non-cascaded square screw
Connectionbe-
tweencubicleand
mainbusbars
L1...3, N (PEN) Rectangular busbar 2 × 20 × 10, 2 × 30 × 10 8 8PQ9500-0BA16 DIN 603 - M10x45 non-cascaded square screw
Connection be-
tween main bus-
bar PEN ands
cubicle
PEN (per cubicle) 2 8PQ9500-0BA34 DIN7500 - M6x10 self-tapping screw
Main busbar systems with 4 bars per phase
Connection from
main busbars to:
Cascaded vertical
busbars
Profiled busbar 30 × 30, 40 × 30 4 8PQ9500-0BA16 DIN 603 - M10x45 non-cascaded square screw
8 8PQ9500-0BA01 M10x25 T-head screw
12 8PQ9500-0BA60 DIN 6796 10 clamping washer
12 8PQ9500-0BA05 Hexagonal nut ISO 4032 M10
Non-cascaded
vertical busbars
Connectionbe-
tweencubicleand
mainbusbars
L1...3, N (PEN) Rectangular busbar 4 × 20 × 10, 4 × 30 × 10 8 8PQ9500-0BA16 DIN 603 - M10x45 non-cascaded square screw
Connection be-
tween main bus-
bar PEN and
cubicle
PEN (per cubicle) 2 8PQ9500-0BA34 DIN7500 - M6x10 self-tapping screw
Fasteners for connections
between copper busbars

6Assembly Kits for Switching
Devices
6/2 General Data
6/3 Assembly kit for
SENTRON 3WL circuit
breakers
SENTRON 3VL moulded case
circuit breakers
SENTRON 3VT moulded case
circuit breakers
SENTRON 3K disconnectors
6/26 Assembly kit for in-line fuse
switch disconnectors
SENTRON 3NJ4
6/29 Assembly kit for in-line fuse
switch disconnectors
SENTRON 3NJ6
6/32 Assembly kit for modular
installation devices

6/2
6
General Data
■Overview
3
1
4
2
1 Assembly kit for SENTRON 3WL
circuit breakers
2 DIN rail for BETA modular devices
3 Assembly kit for SENTRON 3VL
case circuit breakers, horizontal intallation
4 Assembly kit for SENTRON 3VL
case circuit breakers, vertical installation
01694

6/3Siemens LV 56 · 2008
6
Assembly kit for SENTRON 3WL
circuit breakers
■Overview
3
1
4
2
1 Fixed part for draw-out version
2 Front attachments, flanged, horizontal, vertical
3 Switch position indicator contacts
4 Grounding contact
5
8
9
11
10
7
6
5 Protective louvers
12
13
14
15
16
17
18
25
19
20
21
22
23
24
6 PROFIBUS COM 15 communication module
7 CubicleBUS external modules
8 Auxiliary disconnectors, closing solenoid
9 Connector system for auxiliary units
10 Auxiliary contact modules
11 Front frame
12 Support for locking devices
13 Clear cover
14 Emergency stop button, locking key
15 Motorised mechanism
16 Operation counter
17 Breaker Status Sensor (BSS)
18 Electronic overcurrent release (ETU)
19 Reset solenoid
20 BDA (Breaker Data Adapter) module
21 4-line LCD display
22 Earth fault protection module
23 Rating Plug
24 Measuring function module
25 SENTRON WL circuit breaker

6/4
6
circuit breakers
1) Size II with In max ≤ 2500 A.
2) Size II with In max ≤ 3200 A.
For further information, see the technical documents on SENTRON 3WL
Switching capacity
Size I II
Type 3WL11 3WL12
Switching capacity class N S N S H
Rated operating voltage Ue
up to AC 415 V
Icu kA 55 66 66 80 100
Ics kA 55 66 66 80 100
Icm kA 121 145 145 176 220
up to AC 500 V
Icu kA 55 66 66 80 100
Ics kA 55 66 66 80 100
Icm kA 112 145 145 176 220
up to AC 690 V
Icu kA 42 50 50 75 85
Ics kA 42 50 50 75 85
Icm kA 88 105 105 165 187
up to AC 1000 V
Icu kA – – – – 45
Ics kA – – – – 45
Icm kA – – – – 95
Rated short-time current Icw of circuit breaker
Size I II
Type 3WL11 3WL12
0,5 s kA 50 66 66 80 100
1 s kA 42 50 55 66 80
2 s kA 29,5 35 39 46 501)/562)
3 s kA 24 29 32 37 401)/502)
Rated short-circuit current Icc of circuit breaker
Size I II
Type 3WL11 3WL12
up to AC 500 V kA 50 66 66 80 100
up to AC 690 V kA 42 50 50 75 85
Size I II II
Type up to
3WL11 10
3WL11 12 3WL11 16 3WL12 08 3WL12 10 3WL12 12 3WL12 16 3WL12 20 3WL12 25 3WL12 32
Minimum
phase size
Busbars, Cu, piece 1 × 2 × 2 × 1 × 1 × 2 × 2 × 3 × 2 × 3 ×
bare mm2 60 × 10 40 × 10 50 × 10 50 × 10 60 × 10 40 × 10 50 × 10 50 × 10 100 × 10 100 × 10
Busbars, Cu piece 1 × 2 × 2 × 1 × 1 × 2 × 2 × 3 × 2 × 3 ×
insulated, black mm2 60 × 10 40 × 10 50 × 10 50 × 10 60 × 10 40 × 10 50 × 10 50 × 10 100 × 10 100 × 10

6/5Siemens LV 56 · 2008
6
circuit breakers
■Description
The assembly kit for SENTRON 3WL circuit breakers is made up of:
• Mounting plate
• Crossbars
• Cover with cut-out and fast closing screws (designed for the
installation of the Sentron 3WL with cover frame)
• Separation partition
• Fasteners
The horizontal plate is suitable for the installation of circuit
breakers, in fixed and draw out versions of different sizes.
Horizontal separation ensures the required arcing spaces.
■Configuration
The assembly kits for Sentron 3WL circuit breakers are suitable
for currents of up to 3200 A.
The Sentron 3WL 1240 circuit breaker can be installed only in
800mm deep cubicles.
The assembly kit for Sentron 3WL circuit breakers can be
installed only in 600mm and 800mm deep cubicles.
The cover has a cut-out to fit the relative frame 3WL 9111-
0AP01-0AA0.
■Description
The support kit consists of a strip in fibreglass reinforced plastic
sized 25x25mm and the relative fasteners to secure it to the
cubicle or to the side upright.
■Configuration
The distance between the circuit breaker terminal bar and the
support and the distance between two supports is ≤ 100mm.
Size No. of poles Width
mm
Module height
mm
Mounting plate
SENTRON 3WL
Cover
SENTRON 3WL
Assembly kit for Sentron 3WL, in fixed and draw out versions
BG I, BG II 3 600 550 8PQ6000-3BA31 8PQ2055-6BA05
BG I 4 600 550 8PQ6000-3BA31 8PQ2055-6BA07
BG I 3/4 800 550 8PQ6000-3BA32 8PQ2055-8BA04
BG II 3 800 550 8PQ6000-3BA32 8PQ2055-8BA07
BG II 4 800 550 8PQ6000-3BA32 8PQ2055-8BA05
02050
02051
mm
Support
Ordering code
UI
Support for Sentron 3WL, in fixed and draw out versions
BG I 3/4 600 8PQ6000-4BA35 4
BG II 3 600 8PQ6000-4BA36 4
BG I 3/4 800 8PQ6000-4BA37 4
BG II 3/4 800 8PQ6000-4BA38 4
02057

6/6
6
circuit breakers
■Description
The support kit is made up of crossbars, corner pieces and the
fasteners to secure the support to the structure or the side
upright.
■Configuration
For the arrangement of supports in standard position in the
SIVACON S4 system, see chapter 11 “Dimensions”.
The connection of distribution busbars is not included in the kit.
The busbars must be mounted by the board installation
technician.
mm
Support
Ordering code
UI
Support for busbar connection kit for Sentron 3WL, in fixed and draw out versions
BG I 3,4 600 8PQ3000-1BA70 1
BG II 3 600 8PQ3000-1BA70 1
BG I, BG II 3,4 800 8PQ3000-1BA71 1
Support busway connection SIVACON 8PS
NSE0_02058
02211

6/7Siemens LV 56 · 2008
6
circuit breakers
■Description
The connections to SIVACON 8PS busways are optimised for the
connection of Sentron 3WL circuit breakers in the SIVACON S4
system.
■Configuration
It is important to select the correct combination of circuit breaker,
busway connection and busway.
Busway
connection
Ordering code
Conductor
configuration
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Sentron 3WL
GR I
BVP:660299 100% PEN LDA3423(5)-...
1600
LDA2423(5)-...
1250
LDA1423(5)-...
1100
BVP:660300 100% N 100% PE LDA3623(5)-...
1600
LDA2623(5)-...
1250
LDA1623(5)-...
1100
BVP:660301 100% PEN LDA4423(5)-...
2000
– –
BVP:660302 100% N 100% PE LDA2623(5)-...
2000
– –
Sentron 3WL
GR II
BVP:660303 100% PEN LDA3423(5)-...
2600
LDA2423(5)-...
2000
–
BVP:660304 100% N 100% PE LDA3623(5)-...
2600
LDA2623(5)-...
2000
–
BVP:660305 50% PEN LDA6413(5)-...
3000
LDA5413(5)-...
2500
LDA4413(5)-...
2000
BVP:660306 100% PEN LDA6423(5)-...
3000
LDA5423(5)-...
2500
LDA4423(5)-...
2000
BVP:660307 50% N 50% PE LDA6613(5)-...
3000
LDA5613(5)-...
2500
LDA4613(5)-...
2000
BVP:660308 100% N 50% PE LDA6623(5)-...
3000
LDA5623(5)-...
2500
LDA4623(5)-...
2000
BVP:660309 50% PEN LDA6413(5)-...
3400
– –
BVP:660310 100% PEN LDA6423(5)-...
3400
– –
BVP:660311 50% N 50% PE LDA6613(5)-...
3400
– –
BVP:660312 100% N 50% PE LDA6623(5)-...
3400
– –
Busway
connection
Ordering code
Conductor
configuration
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Sentron 3WL
GR I
BVP:660321 100% PEN LXC0341-... 1400 LXC0141-... 1000 LXA0141-... 800 – –
BVP:660322 100% N 100% PE LXC0351-... 1400 LXC0151-... 1000 LXA0151-... 800 – –
BVP:660323 100% PEN LXA0541-... 1600 LXC0441-... 1600 LXA0441-... 1250 LXC0241-... 1250 LXA0241-... 1000
BVP:660324 100% N 100% PE LXA0551-... 1600 LXC0451-... 1600 LXA0451-... 1250 LXC0251-... 1250 LXA0251-... 1000
Sentron 3WL
GR II
BVP:660325 100% PEN LXA0641-... 2000 LXC0541-... 2000 – – –
BVP:660326 100% N 100% PE LXA0651-... 2000 LXC0551-... 2000 – – –
BVP:660327 100% PEN LXC0641-... 2500 – – – –
BVP:660328 100% N 100% PE LXC0651-... 2500 – – – –
BVP:660329 100% PEN LXA0741-... 2500 – – – –
BVP:660330 100% N 100% PE LXA0751-... 2500 – – – –
BVP:660331 100% PEN LXC0741-... 3200 – – – –
BVP:660332 100% N 100% PE LXC0751-... 3200 – – – –
BVP:660333 100% PEN LXA0841-... 3200 – – – –
BVP:660334 100% N 100% PE LXA0851-... 3200 – – – –

6/8
6
circuit breakers
■Description
The prefabricated Cu busbar kit for Sentron 3WL circuit breakers
is made up of:
• Crossbars
• Support
• Reinforcement
• Copper busbars
• Protective isolation shield
• Fasteners
With the cable entry variants and connection to the vertical
distribution busbars variants, the system offers connection kits
type tested in terms of CT mounting and number of connection
points, in cascaded form, for the respective circuit breaker rated
currents. Through the combination of variants it is possible to
achieve functions such as incomer, outgoing and coupler.
■Configuration
The Cu connecting busbar kit for Sentron 3WL circuit breakers
going to the cable connection system occupies the heights of
the module specified above or below the circuit breaker.
To be able to anchor, bend and connect the cables it is
necessary to leave enough space for the assembly operations.
Construction of connecting busbars for Sentron 3WL circuit
breakers with horizontal rear terminal bars for fixed versions.
Construction of connecting busbars for Sentron 3WL circuit
breakers with flanged terminal bars for draw out versions.
Module height
Size Cur-
rent
No. of
poles
Version Width
mm
above the breaker
mm
below the breaker
mm
Ordering code UI
Kit of prefabricated busbars for Sentron 3WL for connection to the vertical bars, cascaded
BG I 1600A 3/4 Fixed 600 250 300 8PQ6000-0BA34 1
BG I 1600A 3/4 Draw out 600 250 300 8PQ6000-0BA33 1
BG I 1600A 3/4 Fixed 800 250 300 8PQ6000-2BA45 1
BG II 2000A 3/4 Fixed 800 300 350 8PQ6000-0BA41 1
BG II 2000A 3/4 Draw out 800 300 350 8PQ6000-0BA40 1
BG II 3200A 3/4 Fixed 800 300 350 8PQ6000-0BA47 1
Kit of prefabricated busbars for Sentron 3WL for connection to the connecting cables
BG I 1600A 3/4 Fixed 600 200 250 8PQ6000-0BA52 1
BG I 1600A 3/4 Fixed 800 200 250 8PQ6000-2BA47 1
BG II 2000A 3/4 Fixed 800 350 400 8PQ6000-0BA58 1
BG II 3200A 3/4 Fixed 800 350 400 8PQ6000-0BA65 1
Sentron 3WL with horizontal rear terminal bars, for fixed version Sentron 3WL with flanges, for draw out version
02054
02055

6/9Siemens LV 56 · 2008
6
Assembly kit for SENTRON 3VL
moulded case circuit breakers
■Overview
3
1
4
2
1 Fixed part for plugin version
2 Side panels for draw out version
3 Phase separators
4 Front terminal bars, divergent
5
89
11
10
7
6
5 Front terminal bars, straight
12
13
14
15
161718
19
20
21
6 Terminals for Al/Cu cables
7 Terminals for copper cables and busbars
8 Terminal cover, extended
9 Terminal cover, standard
10 Front frame
11 Motorised operating mechanism
with spring accumulator
12 Direct rotary operating mechanism
13 Door locking rotary operating mechanism
14 SENTRON VL circuit breaker
15 Internal accessories
16 Electronic overcurrent release
17 Thermal/magnetic overcurrent release
18 DI module - RCD
19 Rear connections - flat and round
20 COM 10 PROFIBUS-DP communication module
21 Handheld testing device
10
3
4
5
8
9
7
6

6/10
6
Type VL 160X
3VL1
VL 160
3VL2
VL 250
3VL3
VL 400
3VL4
VL 630
3VL5
VL 800
3VL6
VL 1250
3VL7
VL 1600
3VL8
Connection dimensions and types for main circuits
Box terminals
Single- or multi-wire cable only copper mm2 2,5-95 2,5-95 25-185 50-300 – – – –
Flexible wire with sleeve connector mm2 2,5-50 2,5-50 25-120 50-240 – – – –
Busbar mm 12 × 10 12 × 10 17 × 10 25 × 10 – – – –
Clamp for flexible bar mm – – – – 2 pieces
6 × 32
– – –
Power supply terminals with multiple
cables
Single- or multi-wire cable copper or Al mm2 16-70 16-70 25-185 50-300 – – – –
Flexible wire with sleeve connector mm2 10-50 10-50 25-120 50-240 – – – –
Multiple feed-in terminal
Power supply terminals for cables copper or Al mm2 – – – 2 pieces
50-120
2 pieces
50-240
3 pieces
50-240
4 pieces
50-240
–
Flexible wire with end terminal mm2 – – – 2 pieces
50-95
2 pieces
50-185
3 pieces
50-185
4 pieces
50-185
–
Direct busbar connection copper or Al mm 17 × 7 22 × 7 24 × 7 32 × 10 40 × 10 2 × 40 × 10 2 × 50 × 10 3 × 60 × 10
Screw type for screwed connection M 5 M 5 M 8 M 8 M 6 M 8 M 8 –
Assembly kit for SENTRON 3VL
moulded case circuit breakers

6/11Siemens LV 56 · 2008
6
Assembly kit for SENTRON 3VL moulded
case circuit breaker, horizontal installation
■Description
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanisms. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be ﬁtted to the individual covers are available as an
option.
The Link-N kit includes support, cover and fasteners. In the 3-
and 4-pole moulded case circuit breaker combination this kit
provides the internal separation for a branch unit.
■Configuration
For horizontal installation and front connections, extended
terminal covers have to be ordered.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
■Description
The prefabricated Cu busbar kit for Sentron 3VL moulded case
circuit breakers for horizontal installation is made up of:
• Crossbars
• Support
• Plastic reinforcement
• Copper busbars
• Protective isolation shield
• Fastening screws
With the cable entry variants and connection to the vertical
distribution busbars variants, the system offers connection kits
type-tested in terms of CT mounting and number of connection
points to the busbars, in cascaded form, for the respective
circuit breaker rated currents.
■Configuration
The height of the connecting busbars kit matches the type of
circuit breaker.
The connecting busbar kit is suitable for branch units without
differential module.
In addition to the copper busbars and the cover, the “connecting
busbar” kit for Sentron VL circuit breakers for connection to the
cables contains lateral partitions with connecting terminals.
When ﬁtting connecting busbar kit for Sentron VL circuit breakers
for connection to the cascaded vertical busbars in a 600 mm
cubicle, the vertical distribution busbar system must be housed in
the same cubicle (800 mm cubicle with riser compartment 600 +
200 mm).
Circuit
breaker
No.
of
poles
Connection Cover with cut-out for
type of op. mechanism
Height
mm
Width
mm
Depth1
mm
Max no.
of circuit
breakers
Link-N support Equipment
mounting plate
Cover
Sentron 3VL moulded case circuit breakers, fixed, horizontal installation
VL 160X 3 front, rear Direct,mot.rotaryfrontmech. 150 600 400 1 8PQ6000-2BA74 8PQ2015-6BA03
VL 160X 4 front, rear Direct, mot. rotary front mech. 200 600 400 1 8PQ6000-3BA52 8PQ6000-2BA80 8PQ2020-6BA04
VL 160/250 3 front, rear Direct, mot. rotary front mech. 150 600 400 1 8PQ6000-3BA13 8PQ2015-6BA03
VL 160/250 4 front, rear Direct, mot. rotary front mech. 200 600 400 1 8PQ6000-3BA52 8PQ6000-3BA18 8PQ2020-6BA04
VL 400 3 front, rear Direct, mot. rotary front mech. 200 600 400 1 8PQ6000-2BA84 8PQ2020-6BA06
VL 400 4 front, rear Direct, mot. rotary front mech. 250 600 400 1 8PQ6000-3BA53 8PQ6000-2BA87 8PQ2025-6BA02
VL 630 3 front, rear Direct, mot. rotary front mech. 300 600 400 1 8PQ6000-3BA01 8PQ2030-6BA03
VL 630 4 front, rear Direct, mot. rotary front mech. 350 600 400 1 8PQ6000-3BA54 8PQ6000-3BA10 8PQ2035-6BA04
VL 800 3 rear Direct, mot. rotary front mech. 300 600 400 1 8PQ6000-3BA08 8PQ2030-6BA02
VL 800 4 rear Direct, mot. rotary front mech. 350 600 400 1 8PQ6000-4BA16 8PQ2035-6BA05
02064
02059
02060
Circuit
breaker
No. of
poles
Version Ad hoc covers for type
of op. mech.
Max. no. of
switches
Height of module
mm
Width
mm
Ordering code UI
Kit of connecting bars for Sentron 3VL for connection to cascaded vertical distribution bars
VL 250 3 fixed direct 1 150 600 8PQ6000-1BA63 1
Kit of connecting bars for Sentron 3VL for connection to the cables
0165201653
1 minimum depth

Siemens S4 Switchboard

Recommended

Recommended

More Related Content

What's hot

What's hot (9)

Viewers also liked

Viewers also liked (6)

Similar to Siemens S4 Switchboard

Similar to Siemens S4 Switchboard (20)

More from Mark Cheatle

More from Mark Cheatle (11)

Recently uploaded

Recently uploaded (20)

Siemens S4 Switchboard