Shashwata_Rahman_CV_Job
•
0 likes•127 views
Shashwata Rahman is an electrical engineer with experience in integrated analog circuits, mixed-signal electronics, RF systems, and high frequency electronics. He has worked on designing and testing RF frontends, LNA modules, and measurement setups at Infineon Technologies AG. Rahman holds an MSc in Communication Engineering from RWTH Aachen University where he designed a CMOS attenuator for a cognitive radio transceiver. He is proficient in design tools like AWR Microwave Office and programming languages including Matlab.
Report
Share
Report
Share
Download to read offline
Recommended
Resume 5-2015
This document is a resume for Michael L. Davis, an electrical engineer with 1 year of experience in the power industry seeking an entry-level position. He has a BS in Electrical Engineering from Texas A&M University with a 3.01 GPA and specialized in areas such as digital logic design, microprocessor systems, electronics, and electromagnetics. His current role as an Electrical Engineer IV at UC Synergetic involves preparing site drawings, calculations, and project packages for electrical distribution facilities projects.
Kiran Kumar Basavaraju_resume_TI_FT
Kiran Basavaraju is seeking an RF and wireless communication job for Spring 2015. He has experience as an RF engineer intern where he performed LTE network optimization and site testing. He has also presented workshops to increase children's interest in programming. His education includes a Master's degree in Electrical Engineering expected in May 2015 from UT Dallas with a 3.047 GPA, as well as a Bachelor's degree in Electronics and Communication from Visvesvaraya Technological University in India. He has skills in tools like Agilent ADS, AWR, MATLAB, and languages like Java, C, and HTML.
Oscars Resume
Oscar Medina is a graduating Masters student in Electrical Engineering from the University of North Texas, relocating to Boston upon graduation. He has internship experience at L-3 Communications and Textron Marine and Land Systems, where he tested RF components, designed circuit boards and vehicle systems, and supported engineers. Medina also has teaching experience as a teaching assistant and engineering skills in areas such as CAD, MATLAB, LabVIEW, VHDL, and electrical engineering equipment.
Ads lab
This document describes the Advanced Design System (ADS) electronic design automation software. ADS is produced by Keysight and is used for designing radio frequency, microwave, and high-speed digital electronics. It provides schematic capture, simulation, layout, and electromagnetic field simulation capabilities. Keysight has donated ADS to many universities, so most graduates are experienced using it. The document then lists some assignments for an RF and Microwave Engineering lab involving simulating basic filter and RLC circuits using ADS and designing single stub impedance matching circuits.
James_Bassett_Resume
James B. Bassett is seeking a position as a design engineer. He has a Bachelor of Science in Electrical Engineering from the University of Washington with a 3.98 GPA. He has hands-on experience in analog and digital circuit design through over 100 SPICE simulations and schematics as well as PCB layout experience. He also has 5 years of experience with electrical engineering test equipment and 4 years mentoring robotics teams.
Vanderheyden,Alexander_Job Resume 07-2016
Alexander Vanderheyden is a soon-to-be graduate of Virginia Polytechnic Institute and State University where he is earning a Master's of Engineering in Electrical and Computer Engineering focusing on communication technology. He has experience in communications engineering from his degree coursework. His objective is to enter an entry-level engineering position dealing with communications or defense technology once completing his graduate degree.
Girish_Resume_RF
This document provides a resume for Girish Kumar Puttaraju seeking a full-time position in communication/RF engineering. It outlines his academic qualifications including a Master's degree in Electrical Engineering from UT Dallas and Bachelor's degree in Electronics and Communication from India. It also details his technical skills in tools, programming languages, and hardware. His work experience includes an internship at Intel testing LTE firmware. Academic projects covered RF and microwave design, LTE simulation, power amplifier design, antenna design, and more.
Cover_Letter
Girish Kumar Puttaraju is applying for a full-time position in RF and communications. He recently graduated with a Master's degree in Electrical Engineering from The University of Texas at Dallas with a GPA of 3.7. His coursework focused on communication and RF topics. He has experience with tools like MATLAB, HFSS, FEKO, and design languages. He is confident that his academic knowledge and project experience designing components like amplifiers and antennas would be an asset for the position.
Recommended
Resume 5-2015
This document is a resume for Michael L. Davis, an electrical engineer with 1 year of experience in the power industry seeking an entry-level position. He has a BS in Electrical Engineering from Texas A&M University with a 3.01 GPA and specialized in areas such as digital logic design, microprocessor systems, electronics, and electromagnetics. His current role as an Electrical Engineer IV at UC Synergetic involves preparing site drawings, calculations, and project packages for electrical distribution facilities projects.
Kiran Kumar Basavaraju_resume_TI_FT
Kiran Basavaraju is seeking an RF and wireless communication job for Spring 2015. He has experience as an RF engineer intern where he performed LTE network optimization and site testing. He has also presented workshops to increase children's interest in programming. His education includes a Master's degree in Electrical Engineering expected in May 2015 from UT Dallas with a 3.047 GPA, as well as a Bachelor's degree in Electronics and Communication from Visvesvaraya Technological University in India. He has skills in tools like Agilent ADS, AWR, MATLAB, and languages like Java, C, and HTML.
Oscars Resume
Oscar Medina is a graduating Masters student in Electrical Engineering from the University of North Texas, relocating to Boston upon graduation. He has internship experience at L-3 Communications and Textron Marine and Land Systems, where he tested RF components, designed circuit boards and vehicle systems, and supported engineers. Medina also has teaching experience as a teaching assistant and engineering skills in areas such as CAD, MATLAB, LabVIEW, VHDL, and electrical engineering equipment.
Ads lab
This document describes the Advanced Design System (ADS) electronic design automation software. ADS is produced by Keysight and is used for designing radio frequency, microwave, and high-speed digital electronics. It provides schematic capture, simulation, layout, and electromagnetic field simulation capabilities. Keysight has donated ADS to many universities, so most graduates are experienced using it. The document then lists some assignments for an RF and Microwave Engineering lab involving simulating basic filter and RLC circuits using ADS and designing single stub impedance matching circuits.
James_Bassett_Resume
James B. Bassett is seeking a position as a design engineer. He has a Bachelor of Science in Electrical Engineering from the University of Washington with a 3.98 GPA. He has hands-on experience in analog and digital circuit design through over 100 SPICE simulations and schematics as well as PCB layout experience. He also has 5 years of experience with electrical engineering test equipment and 4 years mentoring robotics teams.
Vanderheyden,Alexander_Job Resume 07-2016
Alexander Vanderheyden is a soon-to-be graduate of Virginia Polytechnic Institute and State University where he is earning a Master's of Engineering in Electrical and Computer Engineering focusing on communication technology. He has experience in communications engineering from his degree coursework. His objective is to enter an entry-level engineering position dealing with communications or defense technology once completing his graduate degree.
Girish_Resume_RF
This document provides a resume for Girish Kumar Puttaraju seeking a full-time position in communication/RF engineering. It outlines his academic qualifications including a Master's degree in Electrical Engineering from UT Dallas and Bachelor's degree in Electronics and Communication from India. It also details his technical skills in tools, programming languages, and hardware. His work experience includes an internship at Intel testing LTE firmware. Academic projects covered RF and microwave design, LTE simulation, power amplifier design, antenna design, and more.
Cover_Letter
Girish Kumar Puttaraju is applying for a full-time position in RF and communications. He recently graduated with a Master's degree in Electrical Engineering from The University of Texas at Dallas with a GPA of 3.7. His coursework focused on communication and RF topics. He has experience with tools like MATLAB, HFSS, FEKO, and design languages. He is confident that his academic knowledge and project experience designing components like amplifiers and antennas would be an asset for the position.
CV_ASIM_11_2014
This document contains the resume of Muhammad Asim Akbar. It outlines his professional experience working as an engineer for ZTE HQ Islamabad from 2013 to present, where he performed tasks such as commissioning outdoor BTS equipment, network testing, and documentation. It also lists his prior roles as an instructor at a technical college and internship at PTCL Exchange, as well as his education and skills.
UTHIRA MOHAN- Resume
Uthira Mohan has a Master's degree in Electrical and Computer Engineering from the University of Illinois at Chicago and a Bachelor's degree in Electronics and Communication Engineering from Anna University, India. She has work experience as an intern at Cymer Technologies, Reliance Communications, and NLTVC Syn. Bhd. where she developed automation scripts, evaluated network performance, and designed algorithms. Her technical skills include programming languages like C/C++, Java, Python, and hardware description languages. She is proficient in MATLAB, networking protocols, and has completed projects related to IoT security, 5G modulation schemes, and motion planning robots.
Resume_Vibhas_Bhatnagar
Vibhas Bhatnagar is seeking a position in electrical engineering with a focus on electrical hardware and design. He has a Bachelor of Science in Electrical Engineering from Purdue University with a 3.38 GPA. His relevant experience includes engineering internships at Rockwell Automation and GETRAG Automotive Transmissions where he automated tests, programmed controllers, and measured motor performance. Currently, he is designing a high-fidelity power amplifier for his senior design project and conducting an experiment to minimize ground noise voltage.
Professional History
Current Resume on Projects and Updated Processes leading to enhanced work site production utilizing my Electrical Engineering background.
Resume (Krati Mittal)
Krati Mittal is seeking a position as an engineer where she can continue learning and advancing her skills. She has a Master's degree in Electronics and Communication Engineering and experience working on projects related to cognitive radio networks, channel estimation, signal detection in MIMO systems, and energy-efficient base station scheduling. Her technical skills include MATLAB, C, Java, and SQL.
ahsan cv
M. Ahsan Azeem received a Bachelor of Electrical Engineering from the National University of Computer and Emerging Sciences in Islamabad, Pakistan. He completed projects in RF amplifier design, ladder logic implementation, ALU design on L-Edit, and microcontroller-based water level control. Ahsan also received a 4-year merit scholarship and interned at FESCO WAPDA, learning about grid station distribution panels and team management. His skills include RF circuit design using ADS, layout design on L-Edit and MicroWind, and C++ programming.
CV_Suresh Pillai
Suresh Rajan Pillai is an electrical power engineer currently pursuing an M.Sc. in Electrical Power Engineering at RWTH Aachen University in Germany. He has over 4 years of experience conducting power system studies and transmission planning in India. His master's thesis involved developing a state estimation algorithm for hybrid AC-DC grids. He is fluent in English and several Indian languages and has an intermediate proficiency in German.
Eastman Chemical Company Experience
The student completed three co-op terms at Eastman Chemical Company in electrical engineering. In plant engineering, they worked on projects involving engineering drawings and wrote interlock test procedures. In control systems, they created a human machine interface for operators and implemented logic between it and a PLC. In electric utilities, they coordinated protective devices, processed connection requests, modeled power systems, and ensured compliance with electrical standards.
Cv
Kristoffer Jonsson has worked as a software engineer for EA DICE since 2015 developing online functionality and persistence in C++. He was previously a software engineer at SAAB Training Systems developing simulation software using physical modeling. Jonsson also has experience as a simulation engineer at SWECAST performing casting simulations in Magma Soft and SolidWorks. He received a Master of Science in Engineering Physics from Uppsala University in 2015 with a focus on computational science and applied mathematics.
Steffen Jensen Resume 2017-1-2
Steffen Jensen is an electrical and computer engineering student at the University of Rochester expected to graduate in May 2018 with a 3.83 GPA. He has experience programming in several languages and using design tools. Jensen has worked as a research intern for two summers, researching algorithms and flat panel speaker technology. He also has skills in using laboratory equipment and working independently and as part of a team.
Robert Jamison Resume
Robert Jamison is an electrical engineer with experience in communications engineering, antenna design and application, and RF electromagnetic fields. He has a B.S. in Electrical and Computer Engineering from North Carolina State University with a focus on communications. His professional experience includes work as an RF engineer for American Tower where he performed analysis on antenna deployment and as an engineering intern at RFMD (Qorvo) where he tested RF components. He is proficient in PCB design, signal processing, programming languages and software.
Letter of Recomendation
Glen Alasagas' electronics instructor from ITT Technical Institute recommends him for a position. The instructor taught Glen transmission line theory using a Smith Chart and simulator, spectrum analysis to interpret signals, and path design using software to optimize antenna locations and heights. The instructor enjoyed having Glen in class and can be contacted by phone or email for more information.
Nhr resume
Nivedita Reddy has a Masters in Electrical and Computer Engineering from UT Austin with a specialty in energy systems. She currently works as a Planning Engineer at ERCOT performing long-range transmission planning studies using software like PROMOD and PowerWorld. Previously she held internships at ERCOT in energy market management and metering. She also has work experience at IBM and her academic experience includes research and teaching assistant roles at UT Austin related to solar energy prediction and business modeling.
Aisi2017 keynote speaker
CupCarbon simulator: Simulating the D-LPCN algorithm to find the boundary nodes of a WSN by Ahcene Bounceur, University of Bretagne Occidentale, Brest, France
Willy_Bernal_Resume
This curriculum vitae summarizes Willy Bernal's education and professional experience. He has two master's degrees in electrical and mechanical engineering from the University of Pennsylvania, as well as bachelor's degrees in mechanical and electrical engineering. Bernal has worked as an engineer at the National Renewable Energy Laboratory developing technologies for renewable energy integration in buildings. He has also worked as a lead engineer at Litmotors building controls for an electric vehicle and done research internships at NREL and the University of Pennsylvania.
INDUSTRIAL INPLANT TRAINING IN EMBEDDED SYSTEMS-EEE/ECE/E&I/ICE/CSE/IT-MAASTECH
The document summarizes an inplant training program conducted for pre-final year students in various engineering fields. The program covers topics like basic electronics, embedded systems, circuit design, interfacing sensors and transducers, robotics applications, and mini project development. Students learn skills like component identification, soldering, C and VB programming. The fee for the 1000 INR per student program is designed to provide hands-on experience relevant to their fields of study. A minimum of 10 students is required and certificates will be awarded upon completion.
Engr.Nimra
Nimra Zahoor is seeking an opportunity as an electronics engineer. She has a Bachelor's degree in Electronics Engineering from Mehran University of Engineering and Technology with a 3.16 CGPA. During her studies, she gained experience through internships in various organizations and participated in several extracurricular activities including competitions and seminars. Her final year project involved using MATLAB for medicinal inspection through image processing and edge detection.
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
The document describes an in-plant training program conducted for pre-final year students in various engineering fields including ECE, EEE, E&I, ICE, CSE, IT and Biomedical. The 30 hour program covers topics like electronics component identification, basic circuit assembly and soldering, Orcad circuit design software, embedded systems, microcontroller interfacing, sensors and sample project testing. A similar 20 hour program for CSE/IT and MCA students covers C and Visual Basic programming basics and hardware interfacing. The fee for the program is Rs. 1000 per student.
JannatulFerdous_Resume
Jannatul Ferdous is seeking an internship or co-op in RF and wireless engineering. She has experience designing RF components and amplifiers up to 10 GHz using simulation tools like AWR Microwave Office. Some of her projects include designing an MMIC amplifier on GaAs between 2-4 GHz and a two-stage low noise amplifier for a 2 GHz bandwidth. She has worked as a lab assistant at UTD and as a research engineer and communications intern in Bangladesh.
Curriculum Vitae
Syed Kashan Ali is seeking a position that allows him to utilize his skills and experience in wireless engineering. He has a Master's degree in Wireless and Photonics Engineering and has worked as a researcher at Ericsson AB since 2011 where he designed and evaluated antennas. Prior to that, he held roles as an RF engineer and network engineer for Huawei Tech and L3 Communications where he performed tasks such as RF planning, optimization, and configuration.
Akshitha Resume
This document contains the resume of Akshitha Parchuri. She is seeking a position that allows her to utilize her experience in electrical and computer engineering. She has a Master's degree in these fields and has worked as an engineering intern and research assistant. Her skills include programming languages, applications, operating systems, and wireless technologies. She has experience with projects involving digital radio communication, Bluetooth-based home automation, and minimum energy control systems.
newresume
Bojan Andonovski is a mechatronics engineer with over 10 years of experience in assistive technology, power electronics, and industry automation. He holds a Research Degree in Assistive Medical Robotics from the University of Technology Sydney and Master's and Bachelor's degrees from universities in Germany and Macedonia. Andonovski currently works as a Mechatronics Engineer at K-Hart International, where he has designed and developed concepts for efficient solar panel systems. Prior to this, he held roles researching assistive medical robotics and developing advanced behaviors for robotic platforms.
More Related Content
What's hot
CV_ASIM_11_2014
This document contains the resume of Muhammad Asim Akbar. It outlines his professional experience working as an engineer for ZTE HQ Islamabad from 2013 to present, where he performed tasks such as commissioning outdoor BTS equipment, network testing, and documentation. It also lists his prior roles as an instructor at a technical college and internship at PTCL Exchange, as well as his education and skills.
UTHIRA MOHAN- Resume
Uthira Mohan has a Master's degree in Electrical and Computer Engineering from the University of Illinois at Chicago and a Bachelor's degree in Electronics and Communication Engineering from Anna University, India. She has work experience as an intern at Cymer Technologies, Reliance Communications, and NLTVC Syn. Bhd. where she developed automation scripts, evaluated network performance, and designed algorithms. Her technical skills include programming languages like C/C++, Java, Python, and hardware description languages. She is proficient in MATLAB, networking protocols, and has completed projects related to IoT security, 5G modulation schemes, and motion planning robots.
Resume_Vibhas_Bhatnagar
Vibhas Bhatnagar is seeking a position in electrical engineering with a focus on electrical hardware and design. He has a Bachelor of Science in Electrical Engineering from Purdue University with a 3.38 GPA. His relevant experience includes engineering internships at Rockwell Automation and GETRAG Automotive Transmissions where he automated tests, programmed controllers, and measured motor performance. Currently, he is designing a high-fidelity power amplifier for his senior design project and conducting an experiment to minimize ground noise voltage.
Professional History
Current Resume on Projects and Updated Processes leading to enhanced work site production utilizing my Electrical Engineering background.
Resume (Krati Mittal)
Krati Mittal is seeking a position as an engineer where she can continue learning and advancing her skills. She has a Master's degree in Electronics and Communication Engineering and experience working on projects related to cognitive radio networks, channel estimation, signal detection in MIMO systems, and energy-efficient base station scheduling. Her technical skills include MATLAB, C, Java, and SQL.
ahsan cv
M. Ahsan Azeem received a Bachelor of Electrical Engineering from the National University of Computer and Emerging Sciences in Islamabad, Pakistan. He completed projects in RF amplifier design, ladder logic implementation, ALU design on L-Edit, and microcontroller-based water level control. Ahsan also received a 4-year merit scholarship and interned at FESCO WAPDA, learning about grid station distribution panels and team management. His skills include RF circuit design using ADS, layout design on L-Edit and MicroWind, and C++ programming.
CV_Suresh Pillai
Suresh Rajan Pillai is an electrical power engineer currently pursuing an M.Sc. in Electrical Power Engineering at RWTH Aachen University in Germany. He has over 4 years of experience conducting power system studies and transmission planning in India. His master's thesis involved developing a state estimation algorithm for hybrid AC-DC grids. He is fluent in English and several Indian languages and has an intermediate proficiency in German.
Eastman Chemical Company Experience
The student completed three co-op terms at Eastman Chemical Company in electrical engineering. In plant engineering, they worked on projects involving engineering drawings and wrote interlock test procedures. In control systems, they created a human machine interface for operators and implemented logic between it and a PLC. In electric utilities, they coordinated protective devices, processed connection requests, modeled power systems, and ensured compliance with electrical standards.
Cv
Kristoffer Jonsson has worked as a software engineer for EA DICE since 2015 developing online functionality and persistence in C++. He was previously a software engineer at SAAB Training Systems developing simulation software using physical modeling. Jonsson also has experience as a simulation engineer at SWECAST performing casting simulations in Magma Soft and SolidWorks. He received a Master of Science in Engineering Physics from Uppsala University in 2015 with a focus on computational science and applied mathematics.
Steffen Jensen Resume 2017-1-2
Steffen Jensen is an electrical and computer engineering student at the University of Rochester expected to graduate in May 2018 with a 3.83 GPA. He has experience programming in several languages and using design tools. Jensen has worked as a research intern for two summers, researching algorithms and flat panel speaker technology. He also has skills in using laboratory equipment and working independently and as part of a team.
Robert Jamison Resume
Robert Jamison is an electrical engineer with experience in communications engineering, antenna design and application, and RF electromagnetic fields. He has a B.S. in Electrical and Computer Engineering from North Carolina State University with a focus on communications. His professional experience includes work as an RF engineer for American Tower where he performed analysis on antenna deployment and as an engineering intern at RFMD (Qorvo) where he tested RF components. He is proficient in PCB design, signal processing, programming languages and software.
Letter of Recomendation
Glen Alasagas' electronics instructor from ITT Technical Institute recommends him for a position. The instructor taught Glen transmission line theory using a Smith Chart and simulator, spectrum analysis to interpret signals, and path design using software to optimize antenna locations and heights. The instructor enjoyed having Glen in class and can be contacted by phone or email for more information.
Nhr resume
Nivedita Reddy has a Masters in Electrical and Computer Engineering from UT Austin with a specialty in energy systems. She currently works as a Planning Engineer at ERCOT performing long-range transmission planning studies using software like PROMOD and PowerWorld. Previously she held internships at ERCOT in energy market management and metering. She also has work experience at IBM and her academic experience includes research and teaching assistant roles at UT Austin related to solar energy prediction and business modeling.
Aisi2017 keynote speaker
CupCarbon simulator: Simulating the D-LPCN algorithm to find the boundary nodes of a WSN by Ahcene Bounceur, University of Bretagne Occidentale, Brest, France
Willy_Bernal_Resume
This curriculum vitae summarizes Willy Bernal's education and professional experience. He has two master's degrees in electrical and mechanical engineering from the University of Pennsylvania, as well as bachelor's degrees in mechanical and electrical engineering. Bernal has worked as an engineer at the National Renewable Energy Laboratory developing technologies for renewable energy integration in buildings. He has also worked as a lead engineer at Litmotors building controls for an electric vehicle and done research internships at NREL and the University of Pennsylvania.
INDUSTRIAL INPLANT TRAINING IN EMBEDDED SYSTEMS-EEE/ECE/E&I/ICE/CSE/IT-MAASTECH
The document summarizes an inplant training program conducted for pre-final year students in various engineering fields. The program covers topics like basic electronics, embedded systems, circuit design, interfacing sensors and transducers, robotics applications, and mini project development. Students learn skills like component identification, soldering, C and VB programming. The fee for the 1000 INR per student program is designed to provide hands-on experience relevant to their fields of study. A minimum of 10 students is required and certificates will be awarded upon completion.
Engr.Nimra
Nimra Zahoor is seeking an opportunity as an electronics engineer. She has a Bachelor's degree in Electronics Engineering from Mehran University of Engineering and Technology with a 3.16 CGPA. During her studies, she gained experience through internships in various organizations and participated in several extracurricular activities including competitions and seminars. Her final year project involved using MATLAB for medicinal inspection through image processing and edge detection.
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
The document describes an in-plant training program conducted for pre-final year students in various engineering fields including ECE, EEE, E&I, ICE, CSE, IT and Biomedical. The 30 hour program covers topics like electronics component identification, basic circuit assembly and soldering, Orcad circuit design software, embedded systems, microcontroller interfacing, sensors and sample project testing. A similar 20 hour program for CSE/IT and MCA students covers C and Visual Basic programming basics and hardware interfacing. The fee for the program is Rs. 1000 per student.
What's hot (18)
INDUSTRIAL INPLANT TRAINING IN EMBEDDED SYSTEMS-EEE/ECE/E&I/ICE/CSE/IT-MAASTECH
INDUSTRIAL INPLANT TRAINING IN EMBEDDED SYSTEMS-EEE/ECE/E&I/ICE/CSE/IT-MAASTECH
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
Similar to Shashwata_Rahman_CV_Job
JannatulFerdous_Resume
Jannatul Ferdous is seeking an internship or co-op in RF and wireless engineering. She has experience designing RF components and amplifiers up to 10 GHz using simulation tools like AWR Microwave Office. Some of her projects include designing an MMIC amplifier on GaAs between 2-4 GHz and a two-stage low noise amplifier for a 2 GHz bandwidth. She has worked as a lab assistant at UTD and as a research engineer and communications intern in Bangladesh.
Curriculum Vitae
Syed Kashan Ali is seeking a position that allows him to utilize his skills and experience in wireless engineering. He has a Master's degree in Wireless and Photonics Engineering and has worked as a researcher at Ericsson AB since 2011 where he designed and evaluated antennas. Prior to that, he held roles as an RF engineer and network engineer for Huawei Tech and L3 Communications where he performed tasks such as RF planning, optimization, and configuration.
Akshitha Resume
This document contains the resume of Akshitha Parchuri. She is seeking a position that allows her to utilize her experience in electrical and computer engineering. She has a Master's degree in these fields and has worked as an engineering intern and research assistant. Her skills include programming languages, applications, operating systems, and wireless technologies. She has experience with projects involving digital radio communication, Bluetooth-based home automation, and minimum energy control systems.
newresume
Bojan Andonovski is a mechatronics engineer with over 10 years of experience in assistive technology, power electronics, and industry automation. He holds a Research Degree in Assistive Medical Robotics from the University of Technology Sydney and Master's and Bachelor's degrees from universities in Germany and Macedonia. Andonovski currently works as a Mechatronics Engineer at K-Hart International, where he has designed and developed concepts for efficient solar panel systems. Prior to this, he held roles researching assistive medical robotics and developing advanced behaviors for robotic platforms.
Farag- Resume
Farag Ihsona is seeking a position in telecommunications engineering with a focus on photonics and fiber optics. He has a Master's degree in Telecommunications Engineering Technology from RIT and a Bachelor's degree in Electrical and Electronic Engineering from the University of Garyounis in Libya. His experience includes graduate research in polarization division multiplexing systems, modeling electro-absorption modulators, and characterizing photonic components. He has worked as a research assistant, teacher assistant, site engineer, and equipment test engineer.
CV of Rahman
Fahad Rahman has a Master's degree in Communication Technology from University of Ulm and a Bachelor's degree in Electrical and Telecommunication Engineering from North South University. His master's thesis involved designing a 110GHz voltage controlled oscillator using SiGe BiCMOS technology. He has work experience in image processing and pattern recognition at Daimler AG and research experience in microelectronics and optoelectronics at University of Ulm. He has skills in programming, hardware development, measurement equipment, and spoken English.
kiran_Basavaraju_B
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas and expects to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He is proficient in software such as AWR, MATLAB, and Agilent ADS. Kiran has also interned as an RF engineer where he performed LTE network optimization and site testing.
Shilpi Sharma Resume
Shilpi Sharma is seeking a position as an RF and Microwave Design Engineer. She has a Master's degree in Electrical Engineering from UT Dallas with a 3.889 GPA and a Bachelor's degree in Electronics Engineering from Birla Institute of Technology with an 8.05/10 GPA. Her relevant coursework includes RF and Microwave Circuits, Systems Engineering, Amplifier Design, and Antenna Engineering. For course projects, she has designed and analyzed RF circuits and systems using software like AWR Microwave Office and HFSS and has experience measuring circuits using equipment like vector network analyzers. She has worked as an RF Antenna and System Research Assistant and had an internship at National Instruments in their A
Ramkumar_CV
This document is a resume for Ramkumar Sainagsubramanian. It summarizes his work experience as a product engineer and RFIC/mixed signal engineer for various companies over the past 6+ years. It details his roles and responsibilities supporting new product introduction, production ramp, quality control, and supply chain management. It also lists his education credentials and technical skills.
Daisy_resume_2016_s
Daisy Ingram has over 30 years of experience in RF systems engineering, including 16 years working on millimeter-wave phased array and radar systems. She has expertise in RF payload system design, transceiver module design, and component design for both military and commercial projects. Ingram has led several internal research projects developing new technologies such as MMIC amplifiers, antenna arrays, and receiver systems. She holds an M.S. and B.S. in Electrical Engineering from UCLA.
kiran_Basavaraju_LW
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas, expected to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He also has experience simulating wireless communication systems and analyzing link budgets and system performance.
MANOJ_H_RAO_Resume
Manoj Rao has a Master's degree in Electrical and Computer Engineering from UT Austin with a 3.88 GPA. He has over 2 years of industry experience as a design engineer at Texas Instruments where he worked on digital and physical design of ADCs. He also had an internship at NVIDIA working on power management unit verification. His skills include RTL design, synthesis, physical design, and experience with tools like Verilog, VHDL, Synopsys, and Cadence.
Hrishikesh atre resume intern
Hrishikesh Atre is a master's student in electrical engineering at UT Dallas with a GPA of 3.83. He has a bachelor's degree in electronics and communication engineering from Chaitanya Bharathi Institute of Technology. His objective is to attain an internship or co-op position in electrical engineering. He has experience designing a data acquisition system using microcontrollers as an intern at Vector Technologies. His skills include MATLAB, C/C++, Verilog, VHDL, and he has done projects simulating OFDM, DTMF, and designing FIR filters.
Nma resume jan16th
This document is a resume for Nikhil Anand Muthya that outlines his education, technical skills, academic projects, work experience, and a publication. It shows that he has a Master's degree in Electrical Engineering from UT Dallas and a Bachelor's degree in Electronics and Communication from BNM Institute of Technology. His technical skills include tools like LabVIEW, MATLAB and hardware like oscilloscopes. He has worked on academic projects involving transmission line matching, LTE simulation, and space debris detection. His work experience includes internships at Apple testing radiated emissions and a role at Accord Software developing GNSS receivers and downconverters. He has one publication on DME interference mitigation.
Resume
Mitchell D. Herndon is seeking an engineering position and has relevant experience constructing hardware components and cable harnesses for electronic warfare systems through co-ops at Georgia Tech Research Institute. He has a 3.6 GPA while pursuing a Bachelor of Science in Electrical Engineering from Georgia Institute of Technology graduating in Fall 2016. Additionally, he has worked as a water quality technician and tutor. Herndon has skills in programming languages like MATLAB, C, C++ and software like Labview, Quartus II and has experience with electronics hardware. He is pursuing a master's degree in electrical engineering.
Giacomo Cernicchi - MSc_ENG
This document provides information about a Master of Science thesis titled "Design and implementation of a software module for the Media Server introduction in a Java Call Control development environment". The thesis involves implementing a software module to introduce a Media Server into a Java Call Control (JCC) development environment. The module, developed in Java, allows typical Media Server functionality using MGCP protocol. It integrates easily into a JCC Resource Adaptor and provides a tool for creating multimedia VoIP services in JCC. The document also lists subjects covered in the Msc (Hons) in Telecommunication and Computer Science Engineering program, including areas of telecommunications, automation, electronics, computer science, measurements and quality, and electromagnetic fields.
akshay resume
Akshay Mohan is an RF design engineer currently working at Amazon Lab126. He has a MS in Electrical Engineering from University of Texas at Dallas and a BE in Electronics and Communication from Visvesvaraya Technological University, RIT, Bangalore. His experience includes internships at Amazon Lab126 and Apple where he worked on RF subsystem design, testing, and characterization for products including the Fire Phone, Fire TV, e-readers and Amazon Echo. He has strong skills in RF simulations, PCB design, and FCC/CTIA compliance testing.
AnupVMathur
Anup Mathur has experience as an engineering intern at Spirent Communications where he worked on enhancing channel modeling and developing test cases for channel emulators. He has also conducted research projects on SDN controllers for wireless networks, relay attacks on NFC, content-based routing, and power management in wireless sensors. Mathur is skilled in programming languages like C, C++, C#, Matlab, and Python and has an MS in Electrical and Computer Engineering from Rutgers University.
HANI
Hani Esmaeelzadeh is a Ph.D. student in Electrical Engineering at UCLA studying circuits and embedded systems. He received his M.S. in Electrical Engineering from Sharif University of Technology in Iran and his B.S. from K.N. Toosi University of Technology, also in Iran. His research interests include RFICs, analog and mixed-signal circuits, and data converters. He has worked on projects involving oscillators, phase-locked loops, synthesizers, and pipeline ADCs. He has received several honors and fellowships for his academic and research accomplishments.
Norbert Prack_CV
This CV summarizes the experience and qualifications of Norbert Prack, a telecommunications engineer seeking a new position. Prack has over 13 years of experience in radio access network engineering roles for Ericsson in Hungary, including integration, troubleshooting, software upgrades, and optimization of GSM, UTRAN, and LTE networks. He also has experience providing customer support and conducting testing and projects for major operators around the world. Prack has a degree in electrical engineering and is proficient in Microsoft Office, RAN protocols, and several Ericsson tools.
Similar to Shashwata_Rahman_CV_Job (20)
Shashwata_Rahman_CV_Job
- 1. shashwata.rahman@gmail.com Tel: 017632439126 Gräfstrasse 121A, München, 81241 1 CURRICULUM VITAE Shashwata Rahman PERSONAL PROFILE An electrical engineer specializing in the fields of Integrated Analog Circuits, Mixed-Signal Electronics, RF- Systems and High Frequency Electronics, with a comprehensive knowledge of designing, simulating, measuring and verifying high frequency devices, seeking for opportunities to work, learn and showcase engineering potential in a professional company. WORK EXPERIENCE Work Student AE (Designing frontends with uplink carrier aggregation) June 2016 – March 2017 Company: Infineon Technologies AG (IFAG PMM RFS AE MRF) Tasks: Research, design, PCB layout, measure and optimise an uplink RF-frontend for mobile phone transceiver with carrier aggregation. Device Modelling for various Infineon LNA modules Measuring, verifying, and data compiling for Transceiver and LNA modules. Design RFFE (RF-Front End) panel and the concept for user interface. Internship AE (Optimizing the Gamma Opt measurement setup) Dec. 2015 – May 2016 Company: Infineon Technologies AG (IFAG PMM RFS AE MRF) Tasks: Assembling and optimising the Gamma Optimum measurement setup which is used to find the best case impedance matching for the lowest noise figure with respective gains. Measuring, verifying, matching network optimisation, soldering and data compiling for various LNA modules. Scripting and Matlab coding to optimise existing lab automation software. Analytical study on Various Repeaters. Student Assistant (Assisting with the design of a High-If transmitter): May 2015 – Aug 2015 CHAIR: IAS (Integrated Analog Circuits and RF-Systems), RWTH Aachen University, Aachen, Germany Tasks: Simulating, designing, process testing and creating layouts for components for a High- IF transmitter for a Cognitive Radio Transceiver. Student Assistant (Develop Matlab models for EWOD): Jan. 2014 – April 2014 CHAIR: UMIC (Ultra high speed Mobile Information and Communication), RWTH Aachen University, Aachen, Germany Tasks: Researching, designing and implementing COMSOL and MATLAB models for Digital Microfluidic Devices for Lab-on-Chip via Electro-wetting on Dielectrics (EWOD). Student Assistant (Designing Switch mode Class-F amplifiers): Sept. 2013 – Jan 2014 CHAIR: HFE (High Frequency Electronics), RWTH Aachen University, Aachen, Germany Tasks: Designing and simulating a Switch Mode Class-F Power Amplifier for 3GHz with High PAE. Middle School Teacher: Jan. 2008 – Jan. 2010 Princeton Education Tuition Centre, Dhaka, Bangladesh Subjects: Mathematics, Physics and Economics.
- 2. EDUCATION Communication Engineering (Master of Science) Sept. 2010 – March2017 RWTH Aachen University, Aachen, Germany (CGPA – 2.7) Master Thesis: May 2014 – Jan. 2015 Topic: Designing of the Input Stage of a High-IF Transmitter for a Cognitive Radio Transceiver Task: Designing, simulating and optimising a highly linear CMOS Attenuator with a linear in dB attenuation range of 0-35dB providing automatic gain control and adequate input matching (Grade: 1.3). Seminar: “Standards, Design and Technologies for Automotive Radars”. Electrical and Electronics Engineering (Bachelor of Science) June 2006 – June 2010 American International University Bangladesh (AIUB), Dhaka, Bangladesh (CGPA - 1.54) Bachelor Project and Thesis: Designing and implementing a sensor based automated fire-fighting robot kit that is capable of detecting and neutralizing fire. (Grade: 1.0) Secondary School (GCE A-Levels) Feb 2004 – Feb 2006 Mastermind School, Dhaka, Bangladesh Subjects Taken: Mathematics, Higher Mathematics, Physics, Economics. HARDWARE SKILLS Measurement Setups: S-parameter, Noise Figure, Gamma Optimum, Harmonics, IIP3, Cross Modulation. Soldering: SMT and THT soldering via soldering paste, soldering iron and Heat plate. SOFTWARE SKILLS Design tools: AWR Microwave Office (very good), Cadence Virtuoso (proficient), ADS (very good), COMSOL (good), P-spice (good), Lab View (good), Eagle (basic) Programming Languages: Matlab (good), C (Basic), Embedded C (Basic), Python (Basic). MS Office: MS Word (proficient), MS Power Point (proficient), MS Excel (very good), MS Visio (Proficient). Operating systems: Windows (excellent), Linux (good), TinyOS (basic). LANGUAGE PROFICIENCY Bangla: Native speaker English: Proficient (IELTS Overall Band 8.0) Deutsch: Basic (A2, Sprachenzentrum der RWTH Aachen) Hindi: Good (Speaking) Urdu: Good (Speaking)