Kiran Kumar Basavaraju_resume_TI_FT
•
2 likes•168 views
Kiran Basavaraju is seeking an RF and wireless communication job for Spring 2015. He has experience as an RF engineer intern where he performed LTE network optimization and site testing. He has also presented workshops to increase children's interest in programming. His education includes a Master's degree in Electrical Engineering expected in May 2015 from UT Dallas with a 3.047 GPA, as well as a Bachelor's degree in Electronics and Communication from Visvesvaraya Technological University in India. He has skills in tools like Agilent ADS, AWR, MATLAB, and languages like Java, C, and HTML.
Report
Share
Report
Share
Download to read offline
Recommended
DGK - Resume (Final)
Danish Gul Khan is an electrical engineer from Pakistan with over 7 years of experience. He has a Master's degree in Electrical Engineering and has worked on projects involving electrical system design, transmission and distribution, substation maintenance, and smart grid implementation. His experience includes working as an Assistant Manager at K Electric and as an Assistant Superintendent at Karachi Shipyard and Engineering Works.
KyleGinterResume2015
Kyle Steven Ginter is a motivated Electrical and Computer Engineering student seeking an entry-level engineering position. He has a 3.1 GPA from Rutgers University and experience through coursework and internships in areas such as circuit design, programming, hardware testing, and systems engineering. Ginter has strong technical and communication skills and is hardworking with a desire to learn.
TOBIN MATHEW
- Tobin Mathew is seeking an LTE Inter-Operability Test (IOT) engineering position with experience testing LTE networks and protocols. He has a Master's in Electrical Engineering from the University of North Texas and relevant technical skills and coursework. His experience includes IOT testing of Motorola devices at Motorola Mobility and junior RF engineering at NSN.
Resume 2017
This document is a resume for James Lai seeking an entry-level electrical engineering position. It lists his education including a Master's degree in Electrical Engineering from San Jose State University and a Bachelor's degree from UC San Diego. It details his relevant coursework and skills including experience with circuit design tools, RF systems, and programming. It also lists his work experience, including an internship developing test programs for microcontrollers and previous positions testing antennas and maintaining arcade machines.
Brad rust resume
Electrical Engineer in search of a team to join that values creativity, continual learning, and bringing value to the marketplace that goes beyond the bottom line. In other words, I want to do good work with great people.
CV
Aneeb Ahmad is seeking a position that utilizes his strong organizational skills and ability to work well with others. He has over 3 years of experience as a drive test engineer for 4G and 3G networks. His responsibilities include drive testing, site auditing, throughput testing, coverage testing, and resolving customer complaints. He has a B.E. in Electrical Engineering with a specialization in telecommunications and is Cisco CCNA certified.
ResumeKR_072016
This document provides a summary and resume for Karl Ray, including his contact information, work experience, education, certifications, and skills. Ray has over 30 years of experience as a systems and software engineer working on projects involving missile warning, missile defense, ground stations, and satellites. He is highly skilled in requirements engineering, modeling and simulation, performance analysis, integration and testing of complex distributed systems.
Ahmad Arbaz CV updated
Ahmad Arbaz is a computer and networks engineer seeking an opportunity to utilize his engineering skills and experience. He has a B.Sc. in Computer Engineering from the University of Engineering and Technology with a CGPA of 2.42. His professional experience includes an internship at Mobilink GSM where he worked on RF optimization and drive testing. He has technical skills in Microsoft Office, networking, databases, and programming languages. His areas of interest include networking, telecommunications, and databases.
Recommended
DGK - Resume (Final)
Danish Gul Khan is an electrical engineer from Pakistan with over 7 years of experience. He has a Master's degree in Electrical Engineering and has worked on projects involving electrical system design, transmission and distribution, substation maintenance, and smart grid implementation. His experience includes working as an Assistant Manager at K Electric and as an Assistant Superintendent at Karachi Shipyard and Engineering Works.
KyleGinterResume2015
Kyle Steven Ginter is a motivated Electrical and Computer Engineering student seeking an entry-level engineering position. He has a 3.1 GPA from Rutgers University and experience through coursework and internships in areas such as circuit design, programming, hardware testing, and systems engineering. Ginter has strong technical and communication skills and is hardworking with a desire to learn.
TOBIN MATHEW
- Tobin Mathew is seeking an LTE Inter-Operability Test (IOT) engineering position with experience testing LTE networks and protocols. He has a Master's in Electrical Engineering from the University of North Texas and relevant technical skills and coursework. His experience includes IOT testing of Motorola devices at Motorola Mobility and junior RF engineering at NSN.
Resume 2017
This document is a resume for James Lai seeking an entry-level electrical engineering position. It lists his education including a Master's degree in Electrical Engineering from San Jose State University and a Bachelor's degree from UC San Diego. It details his relevant coursework and skills including experience with circuit design tools, RF systems, and programming. It also lists his work experience, including an internship developing test programs for microcontrollers and previous positions testing antennas and maintaining arcade machines.
Brad rust resume
Electrical Engineer in search of a team to join that values creativity, continual learning, and bringing value to the marketplace that goes beyond the bottom line. In other words, I want to do good work with great people.
CV
Aneeb Ahmad is seeking a position that utilizes his strong organizational skills and ability to work well with others. He has over 3 years of experience as a drive test engineer for 4G and 3G networks. His responsibilities include drive testing, site auditing, throughput testing, coverage testing, and resolving customer complaints. He has a B.E. in Electrical Engineering with a specialization in telecommunications and is Cisco CCNA certified.
ResumeKR_072016
This document provides a summary and resume for Karl Ray, including his contact information, work experience, education, certifications, and skills. Ray has over 30 years of experience as a systems and software engineer working on projects involving missile warning, missile defense, ground stations, and satellites. He is highly skilled in requirements engineering, modeling and simulation, performance analysis, integration and testing of complex distributed systems.
Ahmad Arbaz CV updated
Ahmad Arbaz is a computer and networks engineer seeking an opportunity to utilize his engineering skills and experience. He has a B.Sc. in Computer Engineering from the University of Engineering and Technology with a CGPA of 2.42. His professional experience includes an internship at Mobilink GSM where he worked on RF optimization and drive testing. He has technical skills in Microsoft Office, networking, databases, and programming languages. His areas of interest include networking, telecommunications, and databases.
Iyyappan_updated_cv_june_2016
This document contains a summary of Iyyappan B's resume. He has over 2 years of experience in FPGA and RTL design. He has skills in Verilog/VHDL, Xilinx tools, C/C++, and has worked on projects involving motor control, solar tracking, health monitoring, and cryptography. He has a B.E. in ECE and is currently working as a VLSI Programmer/Engineer.
Musahid Resume
Mohammad Musahid is a senior executive with over 3.6 years of experience in telecom as an RF engineer. He is currently working for IKYA Human Capital Solutions on Reliance JIO 4G projects in Mumbai, optimizing the LTE network and managing a team of LTE RF engineers. Previously he worked for Telecom Network Solution on Reliance 3G projects in Mumbai as a 3G RF optimizer, and for Cell Asia Infocomm on Reliance 3G projects as both a 3G RF engineer and DT engineer. He has a Bachelor's degree in Electronics and Communication Engineering.
2016-02-17 research seminar
The document summarizes the current state of research on Voice over IP (VoIP) quality of service (QoS) in wireless mesh networks (WMNs). It provides background on the challenges of supporting VoIP in dynamic WMNs. The author's research plan involves evaluating VoIP performance under different QoS feature modifications, including adding fixed mesh routers and using IPv6. Simulations will measure delay, jitter and packet loss under scenarios with varying mobility and traffic conditions. Progress so far includes a published paper and near completion of a second paper for submission.
Transport pv-p1 b-updated
Ciena India is looking for SVT/PV (System Verification or Product Verification ) Engineer with 2 Plus Year experience with Layer 2 / Packet / MPLS Technology. Candidate can apply directly to me at nabajaj@ciena.com.
SylvainFlamantCV
Sylvain Flamant has over 30 years of experience in digital signal processing, firmware design, and algorithm development. He has expertise in DSL technologies including designing timing recovery firmware and modeling systems in Mathcad. His work experience includes senior roles at Ikanos/Qualcomm and Wiltron/Anritsu developing DSP hardware and firmware. He holds an MSEE from Stanford University and patents in peak-to-average ratio reduction and clock signal recovery.
Cv mrudang pujari
Mrudang Pujari is an ASIC design engineer with expertise in microarchitecture design, RTL coding, digital system design, CDC techniques, and FPGA design. He has experience with Verilog, SystemVerilog, and Perl scripting. Some of his projects include implementing USB 3.1 smart isochronous scheduling in Verilog and calculating USB bandwidth utilization. He completed his BTech in Electronics and Communication Engineering and had a six-month internship in front-end design and verification. Currently he works as an ASIC design engineer focusing on microarchitecture, RTL coding, and digital design.
TRACK C: Methodology for Mixed Mode Design & Verification of Complex SoCs/ Ja...
This document discusses methodology for mixed mode design and verification of complex system-on-chips. It begins with examples of mixed signal SoCs including RF analog front ends and power management ICs. It then discusses the analog and digital design flows and lessons learned from mixed mode projects. Key lessons include the need for clear communication between analog and digital teams, respecting differences in their flows, phasing implementation to allow for changes, and reusing the digital verification environment for mixed mode verification. The conclusion emphasizes that mixed mode design and verification is an iterative team process.
Matthew Getz Resume
Matthew Getz has over 5 years of experience in engineering roles, including as a test engineer and contractor. He has experience designing test hardware and software, characterizing analog and digital circuits, and modifying FPGA code. He has a Bachelor's degree in Electrical Engineering and skills in programming, PCB design, and using test equipment.
Resume
1) The document describes work testing the Tellabs 7300 Ethernet Switch, including understanding requirements, planning test scenarios, executing test cases, identifying and reporting defects, and creating a test report.
2) Testing focused on layer 2 protocols like STP, MSTP/RSTP, ERPS, and ELPS. Additional responsibilities included interoperability testing and configuring layer 2 features.
3) A second project involved developing a multi-service server providing FTP, TCP, and UDP services to clients using C and socket programming. Work included documentation, coding, unit testing, and complete testing.
PLC based control system
This document appears to be a dissertation submitted by Rahul Donga to Gujarat Technological University in partial fulfillment of a Bachelor of Engineering degree. It was developed by Rahul Donga at J.B. Electronics and LDRP Institute of Technology and Research in Gandhinagar, India. The dissertation discusses programmable logic controllers, including their components, programming, and applications.
OM
This document is a curriculum vitae for Om Ji Mishra that summarizes his professional experience and qualifications. He has over 2 years of experience in RF engineering working on 4G/3G/2G networks. He is proficient in several drive test and optimization software tools. His experience includes network planning, parameter optimization, troubleshooting, and project work for Ericsson and Reliance Jio.
CRP Resume - February 2017 (Updated)
Christopher Poniatowski is seeking an electrical engineering position where he can apply his education and technical skills. He has a B.S. in Electrical Engineering from Syracuse University and relevant coursework, projects, and research experience. His skills include programming languages, hardware, and engineering software. He also has work experience in project management, food service, and as a caddy providing customer assistance.
YINI summary
Robert Tanner completed a year-long industry placement at Dstl Security Sciences from September 24, 2013 to September 6, 2014. During this time, he engaged in various technical tasks including data analysis, technical drawing, electronics manufacturing, procurement, testing equipment evaluation, bench tests and trials, and editing technical documents. Some of his achievements included building and testing 25 antenna simulators, designing a bench-testable receiver, contributing to a technical datasheet, and wiring USB cables for use in trials. He also improved his skills in areas like Matlab, technical drawing, soldering, and professional conduct within a workplace.
xiangyuzhang
Xiangyu Zhang is a graduate student studying electronic and computer engineering at the University of Massachusetts Amherst. He has experience in formal equivalence checking, SAT solving, and circuit security research. His research focuses on developing oracle-guided incremental SAT solvers and logic circuit camouflage tools. He has also worked as a teaching assistant for computer systems lab courses.
Resume_Gautham
Gautham Gnanasekar is an electrical engineering graduate with experience developing FPGA prototypes of floating point operators. He has skills in design tools like MATLAB, Simulink, and FPGA tools. He interned at The MathWorks developing high-performance FPGA prototypes for floating point arithmetic and verified ASIC designs as a trainee. He has experience with projects involving floating point adder design, asynchronous FIFO design, and MIPS CPU synthesis.
Zhixian Huang Resume by 20160615
Graduate student seeking a full-time Software Engineering position starting in July 2016 with experience in embedded systems development, Linux, computer networking, cloud computing, robotics, and security. Proficient in Python, C/C++ and has prior experience with MATLAB, HTML, and JavaScript.
Sneha.K_Ericssonsummary1
Sneha Kulkarni is a Core Engineer with over 1 year of experience in networking and telecommunications. She has worked with Ericsson India Pvt Ltd in Bangalore on projects involving BSS operations and maintenance, network planning, and technology migrations for telecom operators like Bharati Airtel and Reliance. Her skills include C, C++, Python, 2G, 3G, 4G technologies, and tools like Clarity, PUTTY, F-SAT and Net-term. She holds a Bachelor's degree in Electronics and Communication Engineering.
Shrilesh kathe 2017
Shrilesh Kathe has experience developing ETL solutions using Apache Spark, Python, and Hive. He has worked as an offshore ETL developer for Nike implementing their WEST BI CWA system using Spark SQL, Python, and Hive. Some of his responsibilities included developing a generic ETL solution to capture web traffic data, writing PySpark applications to parse raw data and store it in partitioned tables, and facilitating XML parsing and logical functions in Python. He also has a Bachelor's degree in Electronics and Telecommunication and certifications in Apache Spark and Java.
sanjeev_cv_updated
This document contains a summary of Sanjeev Kumar's resume. It outlines his objective to secure a challenging position utilizing his technical skills. It details his educational qualifications including a B.Tech degree in 2014. It describes his professional experience from 2016 to present as an RF engineer conducting drive tests and analyzing networks to improve coverage and quality for various mobile operators. It lists his technical skills in using drive test tools and his responsibilities in monitoring network parameters and resolving issues for 2G, 3G and 4G networks.
jayesh_resume
- Jayesh Kumar Sharma is currently working as a Consultant in IP & Testchip Design at Cadence Design Systems since July 2015. He previously worked as a Physical Design Trainee at Orange Semiconductor Private Limited from November 2014 to June 2015.
- He has comprehensive knowledge and experience in physical design implementation, strategies, and static timing analysis. He is proficient with EDA tools like Cadence Virtuoso, Encounter, and languages like Verilog and Perl/TCL.
- Some of his projects include completing the physical design of blocks at 45nm technology with gate counts of 90K and 245K, writing scripts for PNR flows, and fixing timing, DRCs, LVS,
kiran_Basavaraju_B
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas and expects to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He is proficient in software such as AWR, MATLAB, and Agilent ADS. Kiran has also interned as an RF engineer where he performed LTE network optimization and site testing.
kiran_Basavaraju_LW
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas, expected to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He also has experience simulating wireless communication systems and analyzing link budgets and system performance.
More Related Content
What's hot
Iyyappan_updated_cv_june_2016
This document contains a summary of Iyyappan B's resume. He has over 2 years of experience in FPGA and RTL design. He has skills in Verilog/VHDL, Xilinx tools, C/C++, and has worked on projects involving motor control, solar tracking, health monitoring, and cryptography. He has a B.E. in ECE and is currently working as a VLSI Programmer/Engineer.
Musahid Resume
Mohammad Musahid is a senior executive with over 3.6 years of experience in telecom as an RF engineer. He is currently working for IKYA Human Capital Solutions on Reliance JIO 4G projects in Mumbai, optimizing the LTE network and managing a team of LTE RF engineers. Previously he worked for Telecom Network Solution on Reliance 3G projects in Mumbai as a 3G RF optimizer, and for Cell Asia Infocomm on Reliance 3G projects as both a 3G RF engineer and DT engineer. He has a Bachelor's degree in Electronics and Communication Engineering.
2016-02-17 research seminar
The document summarizes the current state of research on Voice over IP (VoIP) quality of service (QoS) in wireless mesh networks (WMNs). It provides background on the challenges of supporting VoIP in dynamic WMNs. The author's research plan involves evaluating VoIP performance under different QoS feature modifications, including adding fixed mesh routers and using IPv6. Simulations will measure delay, jitter and packet loss under scenarios with varying mobility and traffic conditions. Progress so far includes a published paper and near completion of a second paper for submission.
Transport pv-p1 b-updated
Ciena India is looking for SVT/PV (System Verification or Product Verification ) Engineer with 2 Plus Year experience with Layer 2 / Packet / MPLS Technology. Candidate can apply directly to me at nabajaj@ciena.com.
SylvainFlamantCV
Sylvain Flamant has over 30 years of experience in digital signal processing, firmware design, and algorithm development. He has expertise in DSL technologies including designing timing recovery firmware and modeling systems in Mathcad. His work experience includes senior roles at Ikanos/Qualcomm and Wiltron/Anritsu developing DSP hardware and firmware. He holds an MSEE from Stanford University and patents in peak-to-average ratio reduction and clock signal recovery.
Cv mrudang pujari
Mrudang Pujari is an ASIC design engineer with expertise in microarchitecture design, RTL coding, digital system design, CDC techniques, and FPGA design. He has experience with Verilog, SystemVerilog, and Perl scripting. Some of his projects include implementing USB 3.1 smart isochronous scheduling in Verilog and calculating USB bandwidth utilization. He completed his BTech in Electronics and Communication Engineering and had a six-month internship in front-end design and verification. Currently he works as an ASIC design engineer focusing on microarchitecture, RTL coding, and digital design.
TRACK C: Methodology for Mixed Mode Design & Verification of Complex SoCs/ Ja...
This document discusses methodology for mixed mode design and verification of complex system-on-chips. It begins with examples of mixed signal SoCs including RF analog front ends and power management ICs. It then discusses the analog and digital design flows and lessons learned from mixed mode projects. Key lessons include the need for clear communication between analog and digital teams, respecting differences in their flows, phasing implementation to allow for changes, and reusing the digital verification environment for mixed mode verification. The conclusion emphasizes that mixed mode design and verification is an iterative team process.
Matthew Getz Resume
Matthew Getz has over 5 years of experience in engineering roles, including as a test engineer and contractor. He has experience designing test hardware and software, characterizing analog and digital circuits, and modifying FPGA code. He has a Bachelor's degree in Electrical Engineering and skills in programming, PCB design, and using test equipment.
Resume
1) The document describes work testing the Tellabs 7300 Ethernet Switch, including understanding requirements, planning test scenarios, executing test cases, identifying and reporting defects, and creating a test report.
2) Testing focused on layer 2 protocols like STP, MSTP/RSTP, ERPS, and ELPS. Additional responsibilities included interoperability testing and configuring layer 2 features.
3) A second project involved developing a multi-service server providing FTP, TCP, and UDP services to clients using C and socket programming. Work included documentation, coding, unit testing, and complete testing.
PLC based control system
This document appears to be a dissertation submitted by Rahul Donga to Gujarat Technological University in partial fulfillment of a Bachelor of Engineering degree. It was developed by Rahul Donga at J.B. Electronics and LDRP Institute of Technology and Research in Gandhinagar, India. The dissertation discusses programmable logic controllers, including their components, programming, and applications.
OM
This document is a curriculum vitae for Om Ji Mishra that summarizes his professional experience and qualifications. He has over 2 years of experience in RF engineering working on 4G/3G/2G networks. He is proficient in several drive test and optimization software tools. His experience includes network planning, parameter optimization, troubleshooting, and project work for Ericsson and Reliance Jio.
CRP Resume - February 2017 (Updated)
Christopher Poniatowski is seeking an electrical engineering position where he can apply his education and technical skills. He has a B.S. in Electrical Engineering from Syracuse University and relevant coursework, projects, and research experience. His skills include programming languages, hardware, and engineering software. He also has work experience in project management, food service, and as a caddy providing customer assistance.
YINI summary
Robert Tanner completed a year-long industry placement at Dstl Security Sciences from September 24, 2013 to September 6, 2014. During this time, he engaged in various technical tasks including data analysis, technical drawing, electronics manufacturing, procurement, testing equipment evaluation, bench tests and trials, and editing technical documents. Some of his achievements included building and testing 25 antenna simulators, designing a bench-testable receiver, contributing to a technical datasheet, and wiring USB cables for use in trials. He also improved his skills in areas like Matlab, technical drawing, soldering, and professional conduct within a workplace.
xiangyuzhang
Xiangyu Zhang is a graduate student studying electronic and computer engineering at the University of Massachusetts Amherst. He has experience in formal equivalence checking, SAT solving, and circuit security research. His research focuses on developing oracle-guided incremental SAT solvers and logic circuit camouflage tools. He has also worked as a teaching assistant for computer systems lab courses.
Resume_Gautham
Gautham Gnanasekar is an electrical engineering graduate with experience developing FPGA prototypes of floating point operators. He has skills in design tools like MATLAB, Simulink, and FPGA tools. He interned at The MathWorks developing high-performance FPGA prototypes for floating point arithmetic and verified ASIC designs as a trainee. He has experience with projects involving floating point adder design, asynchronous FIFO design, and MIPS CPU synthesis.
Zhixian Huang Resume by 20160615
Graduate student seeking a full-time Software Engineering position starting in July 2016 with experience in embedded systems development, Linux, computer networking, cloud computing, robotics, and security. Proficient in Python, C/C++ and has prior experience with MATLAB, HTML, and JavaScript.
Sneha.K_Ericssonsummary1
Sneha Kulkarni is a Core Engineer with over 1 year of experience in networking and telecommunications. She has worked with Ericsson India Pvt Ltd in Bangalore on projects involving BSS operations and maintenance, network planning, and technology migrations for telecom operators like Bharati Airtel and Reliance. Her skills include C, C++, Python, 2G, 3G, 4G technologies, and tools like Clarity, PUTTY, F-SAT and Net-term. She holds a Bachelor's degree in Electronics and Communication Engineering.
Shrilesh kathe 2017
Shrilesh Kathe has experience developing ETL solutions using Apache Spark, Python, and Hive. He has worked as an offshore ETL developer for Nike implementing their WEST BI CWA system using Spark SQL, Python, and Hive. Some of his responsibilities included developing a generic ETL solution to capture web traffic data, writing PySpark applications to parse raw data and store it in partitioned tables, and facilitating XML parsing and logical functions in Python. He also has a Bachelor's degree in Electronics and Telecommunication and certifications in Apache Spark and Java.
sanjeev_cv_updated
This document contains a summary of Sanjeev Kumar's resume. It outlines his objective to secure a challenging position utilizing his technical skills. It details his educational qualifications including a B.Tech degree in 2014. It describes his professional experience from 2016 to present as an RF engineer conducting drive tests and analyzing networks to improve coverage and quality for various mobile operators. It lists his technical skills in using drive test tools and his responsibilities in monitoring network parameters and resolving issues for 2G, 3G and 4G networks.
jayesh_resume
- Jayesh Kumar Sharma is currently working as a Consultant in IP & Testchip Design at Cadence Design Systems since July 2015. He previously worked as a Physical Design Trainee at Orange Semiconductor Private Limited from November 2014 to June 2015.
- He has comprehensive knowledge and experience in physical design implementation, strategies, and static timing analysis. He is proficient with EDA tools like Cadence Virtuoso, Encounter, and languages like Verilog and Perl/TCL.
- Some of his projects include completing the physical design of blocks at 45nm technology with gate counts of 90K and 245K, writing scripts for PNR flows, and fixing timing, DRCs, LVS,
What's hot (20)
TRACK C: Methodology for Mixed Mode Design & Verification of Complex SoCs/ Ja...
TRACK C: Methodology for Mixed Mode Design & Verification of Complex SoCs/ Ja...
Similar to Kiran Kumar Basavaraju_resume_TI_FT
kiran_Basavaraju_B
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas and expects to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He is proficient in software such as AWR, MATLAB, and Agilent ADS. Kiran has also interned as an RF engineer where he performed LTE network optimization and site testing.
kiran_Basavaraju_LW
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas, expected to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He also has experience simulating wireless communication systems and analyzing link budgets and system performance.
akshay resume
Akshay Mohan is an RF design engineer currently working at Amazon Lab126. He has a MS in Electrical Engineering from University of Texas at Dallas and a BE in Electronics and Communication from Visvesvaraya Technological University, RIT, Bangalore. His experience includes internships at Amazon Lab126 and Apple where he worked on RF subsystem design, testing, and characterization for products including the Fire Phone, Fire TV, e-readers and Amazon Echo. He has strong skills in RF simulations, PCB design, and FCC/CTIA compliance testing.
Sachin kumarasokan resume
Sachin Kumar Asokan is a graduate student studying RF engineering. He has a Master's degree in electrical engineering from UT Dallas and a Bachelor's degree in instrumentation and control engineering from SRM University. He has internship experience testing RF signals and wireless networks for T-Mobile and BNSF Railway. Additionally, he has internship and course experience designing, simulating, fabricating, and testing RF components including filters, power dividers, and antennas. His technical skills include simulation tools, programming languages, and test equipment for RF and microwave systems.
JannatulFerdous_Resume
Jannatul Ferdous is seeking an internship or co-op in RF and wireless engineering. She has experience designing RF components and amplifiers up to 10 GHz using simulation tools like AWR Microwave Office. Some of her projects include designing an MMIC amplifier on GaAs between 2-4 GHz and a two-stage low noise amplifier for a 2 GHz bandwidth. She has worked as a lab assistant at UTD and as a research engineer and communications intern in Bangladesh.
JuswantoWardojo
Juswanto Wardojo is an experienced electrical engineer with 22 years of experience developing RF, microwave, wireless, and fiber optic communication systems. He has expertise in C/C++, MATLAB, and CAD tools like ADS, Xilinx ISE, and PADS. Currently he works as a staff test engineer at Peregrine Semiconductor designing RF power amplifier production test platforms.
Nma resume jan16th
This document is a resume for Nikhil Anand Muthya that outlines his education, technical skills, academic projects, work experience, and a publication. It shows that he has a Master's degree in Electrical Engineering from UT Dallas and a Bachelor's degree in Electronics and Communication from BNM Institute of Technology. His technical skills include tools like LabVIEW, MATLAB and hardware like oscilloscopes. He has worked on academic projects involving transmission line matching, LTE simulation, and space debris detection. His work experience includes internships at Apple testing radiated emissions and a role at Accord Software developing GNSS receivers and downconverters. He has one publication on DME interference mitigation.
Embedded_Resume
The document is a resume for Siddharth Timiri Vijayakumar seeking an opportunity as an Embedded Systems Engineer. It summarizes his proficient experience programming in C/C++ and Assembly along with modeling experience using MATLAB, Simulink and LabVIEW. It also lists his expertise interfacing with communication protocols and microcontrollers, experience developing firmware and device drivers, and skills including analog/digital circuit design.
Girish_Resume_RF
This document provides a resume for Girish Kumar Puttaraju seeking a full-time position in communication/RF engineering. It outlines his academic qualifications including a Master's degree in Electrical Engineering from UT Dallas and Bachelor's degree in Electronics and Communication from India. It also details his technical skills in tools, programming languages, and hardware. His work experience includes an internship at Intel testing LTE firmware. Academic projects covered RF and microwave design, LTE simulation, power amplifier design, antenna design, and more.
Resume-Electronics Design Engineer
Sachin N P is a hardware design engineer with 5 years of experience. He has expertise in hardware design, digital and mixed signal circuit design, design review, troubleshooting, and product life cycle processes. He has worked on several projects including a generic GNSS receiver, an IRNSS/GPS/SBAS receiver, and an IRNSS reference receiver. For these projects, he performed schematic design, PCB layout, validation testing, documentation, and environmental testing. He has a Bachelor's degree in Electronics and Communication Engineering.
Curriculum Vitae
Syed Kashan Ali is seeking a position that allows him to utilize his skills and experience in wireless engineering. He has a Master's degree in Wireless and Photonics Engineering and has worked as a researcher at Ericsson AB since 2011 where he designed and evaluated antennas. Prior to that, he held roles as an RF engineer and network engineer for Huawei Tech and L3 Communications where he performed tasks such as RF planning, optimization, and configuration.
Resume
Syed Kashan Ali is seeking a position that allows him to utilize his skills in integrity, professionalism, and career development. He has over 8 years of experience in fields including research, engineering, planning, and optimization for companies such as Ericsson, L-3, Huawei, and Telecard. He has expertise in areas like antenna design, radio frequency planning, network optimization, and software like ADS, HFSS, and TEMS.
Hrishikesh atre resume intern
Hrishikesh Atre is a master's student in electrical engineering at UT Dallas with a GPA of 3.83. He has a bachelor's degree in electronics and communication engineering from Chaitanya Bharathi Institute of Technology. His objective is to attain an internship or co-op position in electrical engineering. He has experience designing a data acquisition system using microcontrollers as an intern at Vector Technologies. His skills include MATLAB, C/C++, Verilog, VHDL, and he has done projects simulating OFDM, DTMF, and designing FIR filters.
AMIT SINGH RESUME
Amit Pratap Singh is seeking a position that utilizes his 9+ years of experience in telecommunications operations and maintenance, including experience with OSS tools, PDH, SDH, CWDM, DWDM and network management tools. He currently works as an Assistant Manager for Problem Management at Tata Communications, where he is responsible for troubleshooting customer links, new link implementation, and ensuring network uptime of 99.95%. Singh has a Bachelor's Degree in Electronics and Communication Engineering and is ITIL certified in service management.
Resume
George Bates has over 20 years of experience in the IT and telecommunications fields. He has extensive expertise in networking, IP technologies, and mobility products integration and testing. Currently he works as the Transport Test Lead for Alcatel-Lucent, leading testing of small cell features and Ethernet, IPv4, IPv6, and IPsec transport. Previously he held roles testing LTE, CDMA, and EVDO technologies and networks. He has a proven track record of managing projects, resolving complex issues, and training others.
James_Bassett_Resume
James B. Bassett is seeking a position as a design engineer. He has a Bachelor of Science in Electrical Engineering from the University of Washington with a 3.98 GPA. He has hands-on experience in analog and digital circuit design through over 100 SPICE simulations and schematics as well as PCB layout experience. He also has 5 years of experience with electrical engineering test equipment and 4 years mentoring robotics teams.
David's Curriculum Vitae
David Watling has over 25 years of experience in test development and engineering. He currently works at NVIDIA as a test development engineer, where he helps calibrate RF chips and develops firmware algorithms. Previously, he held positions at Zarlink Semiconductor developing RF test fixtures, and at CorinTech and Dowty Maritime assisting with circuit design, testing, and management. He has extensive skills in RF measurement, semiconductor testing, embedded systems, and engineering management.
Achyuta_CV
Achyuta Naga M is seeking a role where he can contribute to hardware design and validation with a focus on innovation and automation. He has experience as an Analog & Mixed Signal IC Test Engineer at Texas Instruments and as a Hardware Application Engineer at Qualcomm India where he developed tools to help customers map RF bands and reduce design time. Prior to that, he worked as an RF Sub-System Design Engineer at Astra Microwave Products where he accomplished several design improvements including reducing power consumption and emissions. He has strong skills in circuit design, testing, troubleshooting, and developing design tools using Visual Basic.
Rajendra Bareto-Resume-Final
Rajendra Baretto has over 16 years of experience in digital signal processing for wireless and wireline products. He has expertise in algorithms, feasibility studies, optimization, debugging, and new product development. His core skills include DSP, MATLAB, C programming, and experience with technologies like xDSL, GSM, WCDMA, and WLAN. He has worked on projects involving DSL standards, power amplifier design, channel coding, and interference cancellation.
Peter's Resume
Peter Geris is a highly skilled and dependable Drive Test Engineer. He has over 10 years of experience testing telecommunications software and troubleshooting networks. Currently he works as an Associate RF Engineer for Telnet-Inc, where he conducts site optimization testing, manages drive testing work, and identifies issues to improve network efficiency. Previously he held engineering roles with PCTEL and 3S Network, where he coordinated project installations and upgrades. Geris has a Bachelor's degree in Communication and Electrical Engineering and is proficient in drive testing tools and radio access technologies.
Similar to Kiran Kumar Basavaraju_resume_TI_FT (20)
Kiran Kumar Basavaraju_resume_TI_FT
- 1. KIRAN BASAVARAJU www.linkedin.com/pub/kiran-basavaraju/45/299/758/ +1(214)-984-7585 601 W Renner Road, Apt 117, Richardson, TX kiran.arty078@gmail.com OBJECTIVE: Seeking job opportunity in the field of RF & Wireless Communication for Spring 2015. WORK EXPERIENCE: RF Engineer Intern Dec 2013 - May 2014 GTL USA Inc - Dallas, TX ─ LTE Network Optimization, RF script design using TEMS & generation sweep testing, Site shakedown. ─ Involved in launches of 1C and 2C macro sites and cluster analysis with good client feedback. ─ Continually improved methods measurement, report generation. (MS Office All packages) Workshop Presenter Aug 2013 - Dec 2013 Dept of CS, UTD - Dallas, TX ─ Volunteered in special outreach programs form department chair in effort to increase children interest in programming. (UTD K-12 Outreach Program) ─ Assisted in developing student-led teaching on analytic skills & computer program technologies. RELEVANT EXPERIENCE: ─ RF & MICROWAVE LAB (DESIGN AND MEASUREMENT LAB) (UTD) - Designed MMIC Amplifier, Patch Antenna, 4:1 power split Wilkinson type equal Power Divider, Resonator(Series & Parallel), Coupler(Branched Line & Edge), Filters(Maximally Flat & Equi-Ripple), Amplifiers on FR-4 substrate and Tested. Tools: AWR , Agilent VNA E5071C ─ ANALOG IC DESIGN & ANALYSIS (UTD) - Designed and analyzed a differential amplifier with a active current mirror load using cadence. Performed AC and DC sweep analysis. Tools: Cadence. ─ RF & MICROWAVE AMPLIFIER DESIGN (UTD) ─ TWO STAGE BROADBAND AMPLIFIER DESIGN: Designed a two stage broadband amplifier. Performed DC, AC, Stability Analysis. Simulated the design results on CAD tool. Tools: AWR ─ TWO STAGE LOW-NOISE AMPLIFIER: Designed a two stage low noise amplifier. Performed Input, Output & Interstage matching design and analysis. Designed bias network and performed stability analysis to match desired project goals using CAD tools. Tools: AWR ─ RF & MICROWAVE SYSTEMS (UTD) - FLIGHT LANDING ASSISTANCE SYSTEM: Designed and analyzed an RF system that comprises of Transmit-Receive blocks, Simulations. Link Budget Analysis, Cascaded gain & Noise figure, P1DB, OIP3 were calculated. Tools : AWR-VSS ─ WIRELESS COMMUNICATION (UTD) - PHYSICAL LAYER SIMULATION OF A SIMPLIFIED OFDM - LTE TECHNOLOGY (Wi-Fi 802.11g): Implemented & analyzed simplified version of Wireless Communication of LTE OFDM system over AWGN channel & Multipath channel by Calculating BER (Bit Error Rate) performance for QPSK, 16 QAM & Adaptive modulation techniques. Tools: MATLAB ─ DIGITAL SIGNAL PROCESSING (UTD) - Designed DTMF Transmitter and receiver using oscillators, band pass and low pass filters. Demonstrated the necessity of various filters. Tools: MATLAB EDUCATION: ─ Master of Science in Electrical Engineering. Expected May 2015 The University of Texas at Dallas, Richardson, TX - GPA: 3.047 ─ Bachelor of Engineering in Electronics & communication. July 2012 Visvesvaraya Technological University, India - GPA: 3.7 TECHNICAL SKILLS: Software Application & Tools: Agilent ADS, AWR, MATLAB, TEMS 5.1, MS Office (All Packages) Programming Languages: Core Java, C ,HTML Wireless Technology & Network Protocols: OSI, TCP /IP, MPLS, BGP, 3GPP, GSM, LTE, OFDM,WCDMA GRADUATE COURSEWORK: Analog IC Analysis & Design Design & Measurement LAB RF & Microwave Amplifier Design RF & Microwave System Engineering RF & Microwave Circuits Wireless Communication Fields & Waves-Electromagnetic Telecommunication Networks Digital Signal Processing