Sharath Chandra Addu is seeking a professional position where he can effectively contribute his 2 years of engineering design experience. He has experience in sheet metal design, modeling, assembly, and drafting using NX software. He has worked on automotive projects for Mahindra & Mahindra and Magna Automotive involving the design of components like floor panels, window frames, and mounting brackets. His responsibilities included 3D modeling, preparing bills of materials in SAP, and releasing drawings in TeamCenter.
The chapter describes principles of the chemical analysis in the SEM and TEM. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
Series of powerpoint slides showing 6 different composite forming techniques: Hand lay-up, vacuum bagging, compression moulding, filament winding, pultrusion and resin transfer moulding. The slides are adapted from the University of Liverpool "Composite Materials" lectures [MATS311] by Prof. W. Cantwell.
Series of powerpoint slides showing three different drawing processes used in the manufacture of wires, rod, tubes and drinks cans. The slides are adapted from the University of Liverpool "Materials Processing" lectures [MATS214] by Dr J. Wilcox.
The chapter describes principles of the chemical analysis in the SEM and TEM. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
Series of powerpoint slides showing 6 different composite forming techniques: Hand lay-up, vacuum bagging, compression moulding, filament winding, pultrusion and resin transfer moulding. The slides are adapted from the University of Liverpool "Composite Materials" lectures [MATS311] by Prof. W. Cantwell.
Series of powerpoint slides showing three different drawing processes used in the manufacture of wires, rod, tubes and drinks cans. The slides are adapted from the University of Liverpool "Materials Processing" lectures [MATS214] by Dr J. Wilcox.
Automotive Manufacturing Process OverviewTal Vagman
Hexagon a leader in manufacturing intelligence solutions explains briefly the automotive production process and key engineering and data challenges facing global producers.
Accredited as Mechanical Engineer. Professional with experience in the Design of Automotive Interior Trims as a Design Engineer and familiar with CATIA V5 R21 (especially in surface designing), profound Knowledge of the plastics that are used in automotive sector. Good understanding of standard automotive design and problem-solving techniques. Good amount of knowledge on GD & T.
1. To support Spires INDIA/UAE/ENG and its suppliers on all Design activities
2. To organise CATIA V5/V6 training courses for our clients.
3. To organise ENOVIA V5/V6 training courses
4. Expected to travel across units in India/UAE/UK
Presently working as Design Engineer in Nebula Technologies Bangalore, Nebula Technologies provides New product design/Concept Design, Reverse engineering solutions and services to various engineering service providers and OEM automotive customers globally.
- Technically accomplished professional with nearly 1 years of experience in Design Engineering and Measurement.
- Presently associated with Nebula Technologies, Bangalore as a Design and Measurement Engineer.
- Areas of expertise include CAD, Creo-Parametric 2, Unigraphics NX, Solidworks and Pro/ Engineer.
- An out-of-the-box thinker with sound GD&T knowledge.
- Possess excellent planning, analytical and interpersonal skills
• Responsible for full Design Concept & full 3D modelling ecstatic look Interior and Exterior (Plastics) & Structure (Sheet metal).
• Optimizing the given product if necessary for manufacturing ease
• Support to manufacturing, planning and SSC team for Proto & Pilot development
• Finding the solution for Signoff Closure Points from the Manufacturer End
• Analysis and resolution of manufacturing, assembly line & field issues
• Review and verification of new component design for Manufacturing Feasibility (Plastic Injection Moulding items,& casting PDC items).
• Design Optimization done by eliminating sheet metal and replacing with plastic material for cost reduction
• Rendering the product as attractive look
• Problem identification in the product samples and Proceeding design modification if needed as well for production also.
• Own product design at ecstatic look ratio and using sheet metal ,plastics, rubber ,mechanism using for linear and rotary motion.
• Design releases for manufacturing the components from initial to final stage through PLM and ARENA
Proficient design engineer having 9+ years of product design experience by using Unigraphics as a cad tool. Good hardworking nature no time bounds when required, well worked with client through phone and mails communication. Passionate about Quality and on time Delivery (OTD).Anticipating a good career which is suitable for my strengths and skill set.
1. RESUME
ADDU SHARATH CHANDRA E-mail: sharath.addu@gmail.com
H. No13-8/10, Mobile No: +919030292955
Patel Nagar,
Nakrekal,
Nalgonda (Dist.) – 508211,
Telangana.
CAREER OBJECTIVE:
To be a Professional and seeking in the field where I can effectively contribute my skills that leads to the
growth of the organization and whereas I can learn and grow.
WORK EXPERIENCE:
2 Years of experience in Engineering Design from DESIGNTECH SYSTEMS Ltd, Pune.
Working experience of Sheet metal design.
Good hands on Modeling, Sheet Metal, Assembly & Drafting.
Working Knowledge on GD&T.
Experience in Automotive sector.
Knowledge of ISO, IS, DIN standards.
Proficient in Conceptual design.
EDUCATION QUALIFICATIONS:
B-Tech in Aravindaksha educational society, Suryapet (2009-2013) with First Class Degree.
Intermediate in MPC from St`Annes Jr.College, Rayapuram (2007-2009) with First class
SSC from St`Annes high school, Rayapuram (2006-2007) with First class.
SKILLS AND ABILITIES:
Excellent knowledge of 3D Modelling, Sheet metal, Drafting & Assembly through Unigraphics NX10.
Good hands on NX 7.5, 8.0, 8.5, 9.0 versions.
Working knowledge of Team Centre.
Creating Bill of Materials by using SAP.
CAREER PROFILE:
Mahindra & Mahindra Ltd, Mumbai, (on behalf of Designtech systems ltd) from November 2014 to till
date.
Magna automotive closures, Pune (on behalf of Designtech systems ltd) from May 2014 to
October 2014.
2. PROJECT WORK DETAILS:
CLIENT: Mahindra & Mahindra Ltd, (1.8Year).
PROJECT #1: Project involves detailing of Backhoe Loader (BHL) cabin.
DESCRITION: Project involves detail designing, assemblies and its components in Sheet metal
Module in Unigraphics.
RESPONSIBILITIES: The scope of work is to develop new concepts considering optimization
techniques, taking reference of current backhoe loader (BHL) cabin.
Worked on components like FLOOR PANELS, WINDOW FRAMES,
MOUNTING BRACKETS, and ROOF TOP FRAME of BHL cabin by using
sheet metal and 3D modelling in NX.9.0&NX.10.0.
During the process capturing the cost reduction responsibilities.
Interaction with the CAE, NVH team members during the development of proto
to production release.
Coordinating with the testing team for development of product and solving the
issues in design aspect.
Preparing the E- BOM of a respective components and assemblies by using SAP.
Updating and releasing the 2D drawings in TeamCenter.
CLIENT: MAGNA SEATING ENGINEERING SERVICES INDIA, Pune (6months).
PROJECT #2: Working on Projects for Global clients like Chrysler, GM, and Ford.
DESRIPTION: Seating System components on Team Centre integrated NX8.5.
RESPONSIBILITIES: Create/support team with output/query ppts.
Modelling & Drafting of Sheet Metal components like Recliner sub Assembly,
Back Frame sub Assembly, Riser Assembly for middle row seats.
Detail Drafting of assemblies and sub-components.
PERSONAL PROFILE:
NAME : A.Sharath Chandra
D O B : 10-10-1991.
LANGUAGES : English, Hindi & Telugu.
ADDRESS : S/O Venkataiah
H. NO: 13-8/10, Nakrekal, Nalgonda, Telangana-508211.
DECLARATION:
I hereby declare that the above mentioned information is correct and I bear the responsibility for the
correctness of the above mentioned particulars.
Date : 30-06-2016
Place : Bhopal. (A.SHARATH CHANDRA)