TSOLUTIONS is a Sole Distributor for VIVOTEK for Thailand market, In this GDSF Seminar @ Secutech Thailand 2012, Topic is TSOLUTIONS : Integrated Security Solution Provider is a main theme, We are going to present all solutions special design and customs for each vertical market. For more information please visit www.tsolutions.co.th info@tsolutions.co.th Tel.025700444
TSOLUTIONS is a Sole Distributor for VIVOTEK for Thailand market, In this GDSF Seminar @ Secutech Thailand 2012, Topic is TSOLUTIONS : Integrated Security Solution Provider is a main theme, We are going to present all solutions special design and customs for each vertical market. For more information please visit www.tsolutions.co.th info@tsolutions.co.th Tel.025700444
สไลด์ประกอบการบรรยายในหัวข้อ "การผลิตสื่อวิดีโอระบบดิจิทัลเบื้องตน (Introduction to Digital Video Production)" ให้กับเจ้าหน้าที่ภายในศูนย์เทคโนโลยีอิเล็กทรอนิกส์และคอมพิวเตอร์แห่งชาติ
Advanced Creating Virtual Reality with HDR Panoramic Photography TechniqueRachabodin Suwannakanthi
Presentation for "Advanced Creating Virtual Reality with HDR Panoramic Photography Technique" training at Southern Thai Art Centre, The Institute for Southern Thai Studies on July 23, 2010.
GeoVision : Access Control Solutions : How to : Wiegand settingsTSOLUTIONS
This document provides instructions for setting up GV-Wiegand Capture to integrate with an access control system. It describes connecting the GV-Wiegand Capture device, configuring the Wiegand data format settings to match the card reader format, and testing the connection. The Wiegand data format is explained, including an example of the standard 26-bit format layout. Troubleshooting tips and instructions for getting help from technical support are also included if the correct format cannot be determined.
GeoVision : Access Control Solutions : Knowledge : AS Manager using MSSQL ServerTSOLUTIONS
1. The document provides instructions for using Microsoft SQL Server with GV-ASManager V2.0, including how to create and connect databases, and convert between Access and SQL database formats.
2. Key steps include installing prerequisites like DirectX and .NET Framework, then using the ASManager Database Setting dialog box to create, connect to, or convert between SQL Server and Access databases for configuration and log files.
3. Functions like database backup, recovery, and upgrading older versions from Access to SQL formats are also covered.
More Related Content
Similar to Security camera that meet all security need
สไลด์ประกอบการบรรยายในหัวข้อ "การผลิตสื่อวิดีโอระบบดิจิทัลเบื้องตน (Introduction to Digital Video Production)" ให้กับเจ้าหน้าที่ภายในศูนย์เทคโนโลยีอิเล็กทรอนิกส์และคอมพิวเตอร์แห่งชาติ
Advanced Creating Virtual Reality with HDR Panoramic Photography TechniqueRachabodin Suwannakanthi
Presentation for "Advanced Creating Virtual Reality with HDR Panoramic Photography Technique" training at Southern Thai Art Centre, The Institute for Southern Thai Studies on July 23, 2010.
GeoVision : Access Control Solutions : How to : Wiegand settingsTSOLUTIONS
This document provides instructions for setting up GV-Wiegand Capture to integrate with an access control system. It describes connecting the GV-Wiegand Capture device, configuring the Wiegand data format settings to match the card reader format, and testing the connection. The Wiegand data format is explained, including an example of the standard 26-bit format layout. Troubleshooting tips and instructions for getting help from technical support are also included if the correct format cannot be determined.
GeoVision : Access Control Solutions : Knowledge : AS Manager using MSSQL ServerTSOLUTIONS
1. The document provides instructions for using Microsoft SQL Server with GV-ASManager V2.0, including how to create and connect databases, and convert between Access and SQL database formats.
2. Key steps include installing prerequisites like DirectX and .NET Framework, then using the ASManager Database Setting dialog box to create, connect to, or convert between SQL Server and Access databases for configuration and log files.
3. Functions like database backup, recovery, and upgrading older versions from Access to SQL formats are also covered.
GeoVision : Video Management Solutions : How to : Upgrading GV-CMS CenterV2 C...TSOLUTIONS
The document provides instructions for upgrading GV-CMS Series software, including GV-Center V2, GV-VSM, GV-Dispatch Server, and GV-Control Center, to the latest versions. The steps include backing up current configuration settings and database, uninstalling current software and drivers, installing latest versions, and restoring backed up data.
GeoVision : Access Control Solutions : How to : Upgrading AS ManagerTSOLUTIONS
This document provides steps to upgrade GV-ASManager software to the latest version while keeping the current database. It involves backing up the existing database, uninstalling the current software and drivers, installing the new version, and then restoring the backed up database and converting it to be compatible with the new software version.
GeoVision : Video Management Solutions : How to : Trigger GV-NVR Thru AS-200TSOLUTIONS
The document describes how to configure a GV-AS200 controller and DVR to trigger recording based on door access. There are two applications: 1) Recording starts when an entry door is accessed and stops when an exit door is accessed, limiting access to one person. 2) Recording starts for a set time when any door is accessed, allowing multiple persons. Wiring the controller outputs to the DVR inputs triggers recording on door events. Settings include work mode, relay switches, and recording time length.
GeoVision : Video Management Solutions : Technology Solutions IndexTSOLUTIONS
The document provides a technical notice index for Geovision surveillance products. It lists technical notices organized by product category and date. The notices cover issues, compatibility problems, and how-to guides related to Geovision video systems, IP cameras, access control, mobile apps and other products. The index allows technicians to easily find relevant support documents to troubleshoot issues or learn how to use different Geovision solutions.
GeoVision : Access Control Solutions : Single Door with 2 times schedule TSOLUTIONS
This document describes how to implement single door access control with separate entry and exit schedules using a GV-AS200 controller module. The inputs of doors A and B on the module are connected together to function as a single door. The module is configured for one-way traffic to allow different schedules for the entry and exit readers. Separate time schedules are assigned to doors A and B to determine when the door will open for entry or exit.
GeoVision : Video Management Solutions : Open Windows Firewall to allow Webca...TSOLUTIONS
This document provides instructions for configuring the Windows firewall to allow a WebCam Server application. It describes opening specific ports required by the server, including ports 4550, 5550, 6550, and 80. It explains either allowing the applications automatically when they are launched, or manually adding them to the firewall exceptions list.
GeoVision : Intergation Solutions : GV-NVR and Access Control with PTZ preset...TSOLUTIONS
1) The document describes how to set up preset functions on a PTZ camera connected to a GV-AS200 controller to monitor two doors.
2) A single PTZ camera is connected to both the Door B and Door D outputs of the GV-AS200 module. When Door A opens, the camera view moves to Door A, and when Door C opens it moves to Door C.
3) The steps include connecting card readers and wires between doors and camera inputs, setting the door relay switches to NO, and allowing accessibility of Doors B and D even when only Doors A and C are used.
GeoVision : CCTV Solutions : Set Noise tolerance to avoid false alarmTSOLUTIONS
To reduce false motion detection alarms caused by grainy video under low light, the document recommends activating a camera's noise tolerance function. This allows adjusting the noise tolerance level to account for different amounts of video noise. Higher noise tolerance makes the camera more tolerant of noise, while increasing motion sensitivity makes it more sensitive to real motion. The noise tolerance setting can be configured for different motion detection and analysis functions in a camera's software.
This case study examines a connection issue experienced by a customer using Sanyo IP cameras with a GV-NVR video management system. The cameras would disconnect and reconnect periodically. Testing showed the problem occurred when directly accessing the cameras and was not specific to the video management system. The cause was determined to be an issue with the Sanyo cameras disconnecting and reconnecting on their own. The customer reported the problem to Sanyo for resolution.
GeoVision : CCTV Solutions : Rename preset cause GV-NVR restartTSOLUTIONS
This document discusses an issue in GV-System version 8.3.0.0 where renaming PTZ presets for certain camera models that had more than 16 presets defined would cause the GV-System to restart. The camera models affected are listed. The resolution is that the issue will be fixed in version 8.3.1.0 of the GV-System software.
This document contains a list of error messages for various applications along with descriptions of common problems and suggested procedures. It includes error messages for CenterV2, SMS, VSM, Control Center, Matrix, Webcam applications for live viewing, playback, server, and EMap functions. The errors range from issues with graphics cards, network ports being in use, missing or disconnected dongles, incorrect passwords, low storage space, and more. Suggested procedures include changing settings, upgrading software, ensuring proper hardware connections, and contacting server administrators.
GeoVision : CCTV Solutions : Recording issue with Bosch IP CameraTSOLUTIONS
When connecting Bosch IP cameras to a GV-System, videos would not record due to the i-frame distance default setting being set to zero in the Bosch camera web interface. To resolve this, the i-frame distance setting must be adjusted to a value between 1-30 in the Bosch camera encoder settings page to ensure proper recording.
GeoVision : CCTV Solutions : RAID vs Non-RAID System for Storing Surveillance...TSOLUTIONS
This document discusses the pros and cons of using RAID vs non-RAID systems for storing surveillance video data. It recommends using a non-RAID system with regular backups rather than a RAID system due to RAID's reduced storage capacity, lack of complete data protection, and risk of data loss if fault tolerance is exceeded. It also provides guidelines for setting up a RAID 5 system if RAID is used.
GeoVision : CCTV Solutions : POS Display for PlayerTSOLUTIONS
In GeoVision camera system version 8.3.0.0, POS videos could not be displayed using the Quick Search player from the Advanced Log Browser if the POS device ID matched the camera ID. This issue will be resolved in version 8.3.1.0. As a workaround, the document recommends assigning mismatched IDs for POS devices and cameras or changing the default player to ViewLog.
This document provides instructions for performing multicast on different IP ranges within the same LAN. It requires that the router supporting the different IP ranges has multicast pass through enabled. An example is provided where a GV-System on the 192.168.0.0 range multicasts video to a host on the 10.0.0.0 range by connecting the routers, enabling multicast pass through on the second router, and allowing the multicast packets to be received across the different IP ranges.
GeoVision : CCTV Solutions : GV-NVR for Object countingTSOLUTIONS
The document provides instructions to achieve higher accuracy for object counting using surveillance cameras. It discusses camera installation positioning the camera in the middle between two detection zones. It also recommends disabling auto gain control and auto white balance features if available, as well as properly configuring object size for the application and camera settings. System requirements of at least 512MB memory and a dual core CPU are required for 8 or more cameras.
GeoVision : CCTV Solutions : GV-NVR Lite VS QNAP VS-2008 ProTSOLUTIONS
The document compares the GV-NVR System Lite NVR to the QNAP VS-2008 Pro NVR. It finds that the GV-NVR System Lite provides smoother live video, records video at full frame rates from multiple megapixel cameras, and makes exporting and playing back recorded video files faster and easier than the VS-2008 Pro. The GV-NVR System Lite also offers more flexible recording modes and supports the RTSP and PSIA protocols.
GeoVision : CCTV Solutions : GV-NVR for Multiple remote connectionsTSOLUTIONS
A runtime error message occurred when connecting to multiple remote servers with 16 or more recording channels enabled. The error caused the GV-System to automatically shut down after clicking OK on the message. The issue was due to recording high channel counts while connected to two or more Center V2, WebCam, or Control Center servers. Reducing remote connections or updating to the next software version was recommended to resolve the problem.
GeoVision : CCTV Solutions : GV-NVR for Multiple remote connections
Security camera that meet all security need
1. Security Camera that meet all security need
Presenter: Ratchanita Chantacharoen
Title: General Manager
TSOLUTIONS CO.,LTD.
VIVOTEK Sole Distributor in Thailand
21. WDR Enhancement
rectifies this shortcoming of BLC by adjusting the tone curve evenly based on
the brightness levels in different areas of the field of view, brightening dark areas
and dimming excessively illuminated areas to increase visibility throughout the
enhanced video. The approach is so effective that it approaches the sensitivity
of the human visual system.
22. WDR Pro
is a version of multi- frame imaging. WDR Pro works by capturing alternate frames
using different exposure times. An image signal processor (ISP) then uses a
sophisticated algorithm to seamlessly combine the optimal portions of these two
complementary frames to create a composite frame that retains detail in both dark
and bright areas of the field of view.
27. Open Standard (ONVIF)
• Freedom to choose http://www.onvif.org/
• Driving IP-based physical security through global standardization.
• All encoding technology would follow the same way.
• Benefits for having ONVIF:
- Increased flexibility
- Future-proof systems
- Reduced total cost
42. Activity Adaptive Streaming
Low
Low
High
High
Bandwidth
Bandwidth
Bandwidth
Bandwidth Frame
Frame
Frame
Frame
Frame
Frame
Frame
Frame
43. SVC Technology
VIVOTEK SVC application in IP Surveillance
1. With SVC, each camera needs only one full frame rate bandwidth to
provide different frame rate data for live viewing and recording at one
single device.
2. SVC Camera requires
only one single stream to
provide different frame rate,
satisfying multiple hardware
requirements, and help
ultimate hardware
performance and system
management.
45. VIDEO MANAGEMENT SOFTWARE
VAST – Free Bundled CMS Software for Supreme Series
* Support unlimited camera
• Client/Server for remote video management
• PIP (Picture in Picture)
• Hierarchical Management
• VAST Matrix for Hundreds of Live Views
• Web Access via IE and FireFox
• Software run as a Service
• Real-time 64-CH live video monitoring
* Simultaneous 16-CH Synchronize playback
* Reliable recording with data backup
* Exported video to 3GP, AVI, EXE
* Post-Video Enhancement and Defog
* Dual monitor display
* Supports geographic E-map