Wifi auxiliary modules by SecArmour
•Download as PPTX, PDF•
0 likes•701 views
This document provides an overview of Wi-Fi security concepts including Wi-Fi frames, channels, modes of a wireless network interface controller, and various Wi-Fi auxiliary modules. It describes management, control, and data frames, common Wi-Fi channels, the six possible wireless NIC modes, and several auxiliary modules for tasks like creating a fake access point, sending deauthentication packets, flooding CTS/RTS frames, broadcasting an SSID list, and fuzzing beacon frames.
Report
Share
Report
Share
Recommended
NVDK-ESP32 WiFi Station / Access Point
This document discusses WiFi technology, wireless devices, and wireless security. It provides an overview of WiFi including that it uses 2.4GHz and 5.8GHz bands and SSIDs to identify networks. Common wireless devices are access points, stations, routers, and repeaters. Basic security methods are disabling SSID broadcast and using MAC address filtering, but WPA2 is recommended. Instructions are given for configuring an ESP32 as a WiFi station to scan for networks and as a soft AP.
FortiWLC
The document describes the features and configuration of FortiWLC, including:
- FortiWLC provides features such as virtual cells, guest captive portal, automatic radio resource provisioning, and spectrum scanning.
- It offers various product models to support networks of different sizes.
- Basic configuration of FortiWLC involves steps like setting the country, hostname, passwords, IP address, and time zone.
- The web UI is used to configure security profiles, ESS profiles, captive portal, and other advanced settings.
St58 t8g specification-www.ttbvs.com
The ST58T8G is a 5.8GHz outdoor wireless access point with a transmission range of 1-30km. It supports the latest encryption standards like WPA/WPA2 and has two Ethernet ports. The access point can operate in various wireless modes and has features like QoS, VLAN tagging, and wireless access control. It is powered by passive PoE or an AC adapter and has an IP67-rated weatherproof housing.
Witribe Customer Premises Equipment Training for LTE
This document provides instructions for configuring and using a Wi-Tribe LTE CPE device. It describes how to view the device and network status, configure Wi-Fi and network settings like port forwarding and firewall rules, perform a factory reset, and find information like the serving site ID and device IP address. Key settings and status pages are outlined, including mobile network status, Wi-Fi settings, LAN/WAN network status, port forwarding, and basic firewall configuration.
Infrastructure management presented to GPNOG (Updated)
This was a presentation given to GPNOG-3 about using a VPN concentrator to securely manage your infrastructure with a Mikrotiks as an example.
Wireless Deauth and Disassociation Attacks explained
This document summarizes a research paper on denial of service (DoS) attacks in wireless mesh networks. It discusses how management frames in wireless networks are unencrypted, allowing attackers to spoof frames and launch DoS attacks like deauthentication and disassociation attacks. It provides details on how these attacks work by spoofing management frames and terminating legitimate connections. It also reviews related work on implementing these attacks using tools and analyzing their impact on network performance. The goal of the research was to implement these attacks on a real wireless mesh testbed and propose a security algorithm to detect such attacks.
Wireless Disassociation and Deauthentication Attacks
This document proposes a lightweight solution called the "Letter-envelop protocol" to defend against deauthentication/disassociation attacks on 802.11 wireless networks. The protocol uses a one-way hard function based on prime factorization to authenticate management frames. When a device wants to disconnect, it sends the frame along with a "letter" that divides the previously exchanged "envelope" number, proving its identity. The protocol modifies the association process to exchange envelopes without requiring new cryptographic capabilities from legacy devices. Experimental results show the protocol effectively prevents spoofing of disconnect frames.
Troubleshooting Wireless LANs with Centralized Controllers
Best practices for troubleshooting your wireless LAN issues prior and during TAC engagement. Learn More: http://www.cisco.com/go/wireless
Recommended
NVDK-ESP32 WiFi Station / Access Point
This document discusses WiFi technology, wireless devices, and wireless security. It provides an overview of WiFi including that it uses 2.4GHz and 5.8GHz bands and SSIDs to identify networks. Common wireless devices are access points, stations, routers, and repeaters. Basic security methods are disabling SSID broadcast and using MAC address filtering, but WPA2 is recommended. Instructions are given for configuring an ESP32 as a WiFi station to scan for networks and as a soft AP.
FortiWLC
The document describes the features and configuration of FortiWLC, including:
- FortiWLC provides features such as virtual cells, guest captive portal, automatic radio resource provisioning, and spectrum scanning.
- It offers various product models to support networks of different sizes.
- Basic configuration of FortiWLC involves steps like setting the country, hostname, passwords, IP address, and time zone.
- The web UI is used to configure security profiles, ESS profiles, captive portal, and other advanced settings.
St58 t8g specification-www.ttbvs.com
The ST58T8G is a 5.8GHz outdoor wireless access point with a transmission range of 1-30km. It supports the latest encryption standards like WPA/WPA2 and has two Ethernet ports. The access point can operate in various wireless modes and has features like QoS, VLAN tagging, and wireless access control. It is powered by passive PoE or an AC adapter and has an IP67-rated weatherproof housing.
Witribe Customer Premises Equipment Training for LTE
This document provides instructions for configuring and using a Wi-Tribe LTE CPE device. It describes how to view the device and network status, configure Wi-Fi and network settings like port forwarding and firewall rules, perform a factory reset, and find information like the serving site ID and device IP address. Key settings and status pages are outlined, including mobile network status, Wi-Fi settings, LAN/WAN network status, port forwarding, and basic firewall configuration.
Infrastructure management presented to GPNOG (Updated)
This was a presentation given to GPNOG-3 about using a VPN concentrator to securely manage your infrastructure with a Mikrotiks as an example.
Wireless Deauth and Disassociation Attacks explained
This document summarizes a research paper on denial of service (DoS) attacks in wireless mesh networks. It discusses how management frames in wireless networks are unencrypted, allowing attackers to spoof frames and launch DoS attacks like deauthentication and disassociation attacks. It provides details on how these attacks work by spoofing management frames and terminating legitimate connections. It also reviews related work on implementing these attacks using tools and analyzing their impact on network performance. The goal of the research was to implement these attacks on a real wireless mesh testbed and propose a security algorithm to detect such attacks.
Wireless Disassociation and Deauthentication Attacks
This document proposes a lightweight solution called the "Letter-envelop protocol" to defend against deauthentication/disassociation attacks on 802.11 wireless networks. The protocol uses a one-way hard function based on prime factorization to authenticate management frames. When a device wants to disconnect, it sends the frame along with a "letter" that divides the previously exchanged "envelope" number, proving its identity. The protocol modifies the association process to exchange envelopes without requiring new cryptographic capabilities from legacy devices. Experimental results show the protocol effectively prevents spoofing of disconnect frames.
Troubleshooting Wireless LANs with Centralized Controllers
Best practices for troubleshooting your wireless LAN issues prior and during TAC engagement. Learn More: http://www.cisco.com/go/wireless
Ch7 ccna exploration 3 lan switching and wireless
This document contains 21 multiple choice questions about wireless networking concepts such as 802.11 standards, wireless security protocols, wireless network design processes, and functions of wireless access points. The questions cover topics like factors influencing adoption of 802.11 standards, statements about wireless security, methods for configuring a new wireless network, identifying settings used to configure the wireless network name, characteristics of wireless security, steps for addressing poor wireless performance in an area, common devices incorporated in wireless routers, wireless access methods, importance of security in wireless networks, compatibility of wireless standards, statements about wireless network security risks, the network design process of identifying access point locations, wireless security features like MAC address filtering, signals transmitted to discover available wireless networks, reasons
2nd lec wireless terminologies
Wireless networks use radio waves to connect devices without cables. They integrate with wired networks through access points and allow mobility as users move between coverage areas. The 802.11 standards define the physical and data link layers for wireless LANs and include specifications like 802.11a, b, g which provide different speeds and frequencies. Security is important for wireless networks and features like WEP have known vulnerabilities. Careful planning of access point placement and antennas is needed for effective coverage.
IOT Protocols
Describes the key protocols used in Internet of Things across the network stack.
It covers the MAC protocol such as 802.15.4, Zigbee, Z-wave, Bluetooth, BLE, some key protocol used in IIoT - Industrial Internet of Things / Automation such as ISA 100.11, Wireless HART, NB-IoT, LTE-M
Effort has been made to keep the explanation short and crisp. The intention was never to replace numerous books on this subject.
Wireless lan electronics and communication engineering
The document discusses wireless local area networks (WLANs) and the IEEE 802.11 standards. It provides an overview of WLAN fundamentals and network architecture, describing components like access points, distribution systems, and stations. It then summarizes the various 802.11 standards from 802.11 to 802.11ac, outlining their key features such as modulation schemes and data rates. The document also covers topics like WLAN security protocols, wireless hotspots, virtual private networks, and an alternative WLAN standard called HIPERLAN.
Wireless and how safe are you
This document discusses the history and types of wireless networks, including WLAN, WPAN, WMAN, and WWAN. It describes the evolution of wireless networking standards such as 802.11a/b/g/n/ac. It also covers wireless security protocols like WEP, WPA, and WPA2 and threats such as man-in-the-middle attacks, session hijacking, and rogue access points. The document recommends steps to protect businesses and individuals, such as using strong passwords, firewalls, and VPNs when connecting to public wireless networks.
The Differences Between Bluetooth, ZigBee and WiFi
Understanding Differences Between Bluetooth, ZigBee and WiFi.
It's not about what is the best it's just a description, the best you have to choose for your project what is suitable more?
Wi Fi Technology - What you don't see you don't care...
This document explains the main information about the Wi Fi technology, it's standards, features and main providers for Cable Modem Wi Fi
CNIT 125 Ch 5 Communication & Network Security (part 2 of 2)
For a college course at Coastline Community College taught by Sam Bowne. Details at https://samsclass.info/125/125_F17.shtml
Based on: "CISSP Study Guide, Third Edition"; by Eric Conrad, Seth Misenar, Joshua Feldman; ISBN-10: 0128024372
Wireless Networks 120719.ppt
This document provides an overview of wireless networks and the 802.11 wireless LAN standard. It describes how wireless LANs connect to wired LANs through access points and can also operate as independent ad hoc networks. Key aspects of 802.11 wireless LANs covered include the physical and data link layers, integration with existing networks through roaming between access points, security considerations, interoperability requirements, hardware requirements, and performance differences from wired LANs. Specific 802.11 standards like 802.11a, 802.11b, 802.11g, 802.11e, and 802.11f are also summarized.
CISSP Prep: Ch 5. Communication and Network Security (Part 2)
This document provides an overview of networking concepts related to communication and network security. It discusses common cabling types used to physically connect networks like twisted pair, coaxial, fiber optic and their characteristics. It also covers common LAN technologies and protocols like Ethernet, token ring, FDDI, physical network topologies and WAN protocols. The document then discusses wireless LANs, Bluetooth, RFID and secure network devices like switches, routers, firewalls and routing protocols.
Recent Trends in Wireless communication
This is a ppt about the recent trends in tech and wireless communication. As the is good document to read we are requesting to study the wireless communal harmony and peace to you. Aster that I have a great day and I will be available from June to September to December to February to the same here to visit our frequently asked questions about HTML5.
And ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha Akshar cholk Thai ne na jato ko bhi 6 baje uthta hai ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye 5.
Wifi
Wi-Fi technology uses radio waves to transmit and receive data wirelessly. It uses standards such as 802.11b, 802.11a, and 802.11g. A Wi-Fi network consists of access points that broadcast a wireless signal to connect devices like computers, phones and tablets. Security measures for Wi-Fi include encrypting data transmission and authenticating users and servers to prevent eavesdropping, spoofing and denial of service attacks. Common configurations and applications of Wi-Fi include home and office networks, as well as use by travelers.
WiFi Networks.pdf
The document provides an overview of WiFi networks and various IEEE 802.11 standards. It discusses basic WiFi concepts and deployment issues. It then summarizes several key WiFi versions including 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, and 802.11ad and how each standard improved data rates and functionality compared to previous versions through techniques like channel bonding and MIMO.
wi-fi technology
Wi-Fi technology refers to wireless local area network (WLAN) standards for devices to connect to the Internet wirelessly. The document discusses Wi-Fi standards including 802.11b, 802.11a, and 802.11g. It describes Wi-Fi network components, topologies, configurations, applications, security techniques and threats. Wi-Fi provides mobility and flexibility but has limitations such as potential interference, performance degradation, and limited range.
Embedded Systems: Lecture 8: Lab 1: Building a Raspberry Pi Based WiFi AP
In this Lab, we go through the steps to build a WiFi Access Point using the Raspberry Pi. The Lab starts by introducing some concepts of Wireless LANs followed by step-by-step procedure to build the AP. The Lab concludes by an evaluation of the performance of the built AP
Basic Network cisco depth of basic knowledge I. All technologies.pdf
A basics of network from cisco ppt, with depth of basic knowledge I. All technologies
Wi fi technology & wap
Wi-Fi (or wireless fidelity) refers to wireless local area network (WLAN) technology based on the IEEE 802.11 standards. It allows electronic devices to connect to a wireless network, mainly using 2.4GHz UHF and 5GHz SHF radio frequencies. Wi-Fi uses access points that broadcast its SSID to wireless devices, which can then connect to the internet or wired network. Common Wi-Fi technologies include 802.11b, 802.11a, and 802.11g. Security measures for Wi-Fi networks include authentication, encryption, and restricting access through passwords or MAC address filtering to prevent unauthorized access.
Zigbee
The document discusses ZigBee/IEEE 802.15.4, which is a wireless communication standard designed for low-power wireless networks. It was created to address the needs of wireless sensor networks that required low cost, low power consumption, and reliability. ZigBee networks operate within the IEEE 802.15.4 standard and have low data rates, low power consumption, and support star, tree, and mesh network topologies. ZigBee is targeted towards wireless control and sensor applications such as wireless lighting, thermostats, and other home and industrial automation devices.
WPAN According To ZIGBEE
These slides explain Zigbee Technology. Also, explain the Wide Private Area Network(WPAN). Also, explain network topologies.
IoT Control Units and Communication Models
The document discusses various components of IoT including control units, communication modules, and wireless technologies. Control units include sensors and actuators that convert physical phenomena into electrical signals. Common sensors detect humidity, temperature, motion etc. Communication modules allow connection and data transfer between IoT devices using short-range wireless technologies like Bluetooth, Zigbee and WiFi. Bluetooth supports audio/video transfer while Bluetooth Low Energy focuses on low power. Zigbee is optimized for large sensor networks with low data rates and power consumption.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
More Related Content
Similar to Wifi auxiliary modules by SecArmour
Ch7 ccna exploration 3 lan switching and wireless
This document contains 21 multiple choice questions about wireless networking concepts such as 802.11 standards, wireless security protocols, wireless network design processes, and functions of wireless access points. The questions cover topics like factors influencing adoption of 802.11 standards, statements about wireless security, methods for configuring a new wireless network, identifying settings used to configure the wireless network name, characteristics of wireless security, steps for addressing poor wireless performance in an area, common devices incorporated in wireless routers, wireless access methods, importance of security in wireless networks, compatibility of wireless standards, statements about wireless network security risks, the network design process of identifying access point locations, wireless security features like MAC address filtering, signals transmitted to discover available wireless networks, reasons
2nd lec wireless terminologies
Wireless networks use radio waves to connect devices without cables. They integrate with wired networks through access points and allow mobility as users move between coverage areas. The 802.11 standards define the physical and data link layers for wireless LANs and include specifications like 802.11a, b, g which provide different speeds and frequencies. Security is important for wireless networks and features like WEP have known vulnerabilities. Careful planning of access point placement and antennas is needed for effective coverage.
IOT Protocols
Describes the key protocols used in Internet of Things across the network stack.
It covers the MAC protocol such as 802.15.4, Zigbee, Z-wave, Bluetooth, BLE, some key protocol used in IIoT - Industrial Internet of Things / Automation such as ISA 100.11, Wireless HART, NB-IoT, LTE-M
Effort has been made to keep the explanation short and crisp. The intention was never to replace numerous books on this subject.
Wireless lan electronics and communication engineering
The document discusses wireless local area networks (WLANs) and the IEEE 802.11 standards. It provides an overview of WLAN fundamentals and network architecture, describing components like access points, distribution systems, and stations. It then summarizes the various 802.11 standards from 802.11 to 802.11ac, outlining their key features such as modulation schemes and data rates. The document also covers topics like WLAN security protocols, wireless hotspots, virtual private networks, and an alternative WLAN standard called HIPERLAN.
Wireless and how safe are you
This document discusses the history and types of wireless networks, including WLAN, WPAN, WMAN, and WWAN. It describes the evolution of wireless networking standards such as 802.11a/b/g/n/ac. It also covers wireless security protocols like WEP, WPA, and WPA2 and threats such as man-in-the-middle attacks, session hijacking, and rogue access points. The document recommends steps to protect businesses and individuals, such as using strong passwords, firewalls, and VPNs when connecting to public wireless networks.
The Differences Between Bluetooth, ZigBee and WiFi
Understanding Differences Between Bluetooth, ZigBee and WiFi.
It's not about what is the best it's just a description, the best you have to choose for your project what is suitable more?
Wi Fi Technology - What you don't see you don't care...
This document explains the main information about the Wi Fi technology, it's standards, features and main providers for Cable Modem Wi Fi
CNIT 125 Ch 5 Communication & Network Security (part 2 of 2)
For a college course at Coastline Community College taught by Sam Bowne. Details at https://samsclass.info/125/125_F17.shtml
Based on: "CISSP Study Guide, Third Edition"; by Eric Conrad, Seth Misenar, Joshua Feldman; ISBN-10: 0128024372
Wireless Networks 120719.ppt
This document provides an overview of wireless networks and the 802.11 wireless LAN standard. It describes how wireless LANs connect to wired LANs through access points and can also operate as independent ad hoc networks. Key aspects of 802.11 wireless LANs covered include the physical and data link layers, integration with existing networks through roaming between access points, security considerations, interoperability requirements, hardware requirements, and performance differences from wired LANs. Specific 802.11 standards like 802.11a, 802.11b, 802.11g, 802.11e, and 802.11f are also summarized.
CISSP Prep: Ch 5. Communication and Network Security (Part 2)
This document provides an overview of networking concepts related to communication and network security. It discusses common cabling types used to physically connect networks like twisted pair, coaxial, fiber optic and their characteristics. It also covers common LAN technologies and protocols like Ethernet, token ring, FDDI, physical network topologies and WAN protocols. The document then discusses wireless LANs, Bluetooth, RFID and secure network devices like switches, routers, firewalls and routing protocols.
Recent Trends in Wireless communication
This is a ppt about the recent trends in tech and wireless communication. As the is good document to read we are requesting to study the wireless communal harmony and peace to you. Aster that I have a great day and I will be available from June to September to December to February to the same here to visit our frequently asked questions about HTML5.
And ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha Akshar cholk Thai ne na jato ko bhi 6 baje uthta hai ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye shikhar ki aur batao ki nai dunia epaper ab naye 5.
Wifi
Wi-Fi technology uses radio waves to transmit and receive data wirelessly. It uses standards such as 802.11b, 802.11a, and 802.11g. A Wi-Fi network consists of access points that broadcast a wireless signal to connect devices like computers, phones and tablets. Security measures for Wi-Fi include encrypting data transmission and authenticating users and servers to prevent eavesdropping, spoofing and denial of service attacks. Common configurations and applications of Wi-Fi include home and office networks, as well as use by travelers.
WiFi Networks.pdf
The document provides an overview of WiFi networks and various IEEE 802.11 standards. It discusses basic WiFi concepts and deployment issues. It then summarizes several key WiFi versions including 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, and 802.11ad and how each standard improved data rates and functionality compared to previous versions through techniques like channel bonding and MIMO.
wi-fi technology
Wi-Fi technology refers to wireless local area network (WLAN) standards for devices to connect to the Internet wirelessly. The document discusses Wi-Fi standards including 802.11b, 802.11a, and 802.11g. It describes Wi-Fi network components, topologies, configurations, applications, security techniques and threats. Wi-Fi provides mobility and flexibility but has limitations such as potential interference, performance degradation, and limited range.
Embedded Systems: Lecture 8: Lab 1: Building a Raspberry Pi Based WiFi AP
In this Lab, we go through the steps to build a WiFi Access Point using the Raspberry Pi. The Lab starts by introducing some concepts of Wireless LANs followed by step-by-step procedure to build the AP. The Lab concludes by an evaluation of the performance of the built AP
Basic Network cisco depth of basic knowledge I. All technologies.pdf
A basics of network from cisco ppt, with depth of basic knowledge I. All technologies
Wi fi technology & wap
Wi-Fi (or wireless fidelity) refers to wireless local area network (WLAN) technology based on the IEEE 802.11 standards. It allows electronic devices to connect to a wireless network, mainly using 2.4GHz UHF and 5GHz SHF radio frequencies. Wi-Fi uses access points that broadcast its SSID to wireless devices, which can then connect to the internet or wired network. Common Wi-Fi technologies include 802.11b, 802.11a, and 802.11g. Security measures for Wi-Fi networks include authentication, encryption, and restricting access through passwords or MAC address filtering to prevent unauthorized access.
Zigbee
The document discusses ZigBee/IEEE 802.15.4, which is a wireless communication standard designed for low-power wireless networks. It was created to address the needs of wireless sensor networks that required low cost, low power consumption, and reliability. ZigBee networks operate within the IEEE 802.15.4 standard and have low data rates, low power consumption, and support star, tree, and mesh network topologies. ZigBee is targeted towards wireless control and sensor applications such as wireless lighting, thermostats, and other home and industrial automation devices.
WPAN According To ZIGBEE
These slides explain Zigbee Technology. Also, explain the Wide Private Area Network(WPAN). Also, explain network topologies.
IoT Control Units and Communication Models
The document discusses various components of IoT including control units, communication modules, and wireless technologies. Control units include sensors and actuators that convert physical phenomena into electrical signals. Common sensors detect humidity, temperature, motion etc. Communication modules allow connection and data transfer between IoT devices using short-range wireless technologies like Bluetooth, Zigbee and WiFi. Bluetooth supports audio/video transfer while Bluetooth Low Energy focuses on low power. Zigbee is optimized for large sensor networks with low data rates and power consumption.
Similar to Wifi auxiliary modules by SecArmour (20)
Wireless lan electronics and communication engineering
Wireless lan electronics and communication engineering
The Differences Between Bluetooth, ZigBee and WiFi
The Differences Between Bluetooth, ZigBee and WiFi
Wi Fi Technology - What you don't see you don't care...
Wi Fi Technology - What you don't see you don't care...
CNIT 125 Ch 5 Communication & Network Security (part 2 of 2)
CNIT 125 Ch 5 Communication & Network Security (part 2 of 2)
CISSP Prep: Ch 5. Communication and Network Security (Part 2)
CISSP Prep: Ch 5. Communication and Network Security (Part 2)
Embedded Systems: Lecture 8: Lab 1: Building a Raspberry Pi Based WiFi AP
Embedded Systems: Lecture 8: Lab 1: Building a Raspberry Pi Based WiFi AP
Basic Network cisco depth of basic knowledge I. All technologies.pdf
Basic Network cisco depth of basic knowledge I. All technologies.pdf
Recently uploaded
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Recently uploaded (20)
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Wifi auxiliary modules by SecArmour
- 3. • Wifi Frames Management Frames o o o o Beacon Probe Association Authentication • Control Frames • Data Frames o Request To Send o Clear To Send o Acknowledgment o Contains data which we want to send
- 4. Wifi Channels • It’s a band of Spectrum • 802.11 uses mostly 2.4 GHZ channel width • 802.11 channels are 22MHZ wide • Each 802.11 channel is Separated by 5MHZ of unused Spectrum known as white space • Generally 1,6,11,14 are used together to avoid overlapping
- 6. Modes Of Wireless Nic • Six Possible Modes of a wireless Nic: 1) 2) 3) 4) 5) 6) Monitor Mode Master Mode Managed Mode Ad-Hoc Mode Mesh Mode Repeater Mode
- 7. Wifi Auxiliary Modules • Auxiliary/dos/wifi/Fakeap • Auxiliary/dos/wifi/deauth • Auxiliary/dos/wifi/cts_rts_flooder • Auxiliary/dos/wifi/ssidlist_beacon • Auxiliary/fuzzers/wifi/fuzz_beacon
- 10. CTS RTS FLOODER
- 11. SSID LIST BEACON
- 12. BEACON FUZZER