This document contains a table listing pipe dimensions including outer diameter, wall thickness, and number per foot in both inches and millimeters. It also lists specifications for oil country tubular goods (OCTG) and linepipe ranges. Additional information is provided on process, specifications, chemistries, lengths, and contact information for a manufacturer's representative.

1. 3-Jan-15
Rev 04
Inches mm T&C PE Inch to Inch mm to mm
6.625 0.288 7.3 20 19.51 8.625 0.125 0.812 219.1 3.2 20.6
6.625 0.352 8.9 24 23.6 9.625 0.197 0.63 244.5 5.0 16.0
7 0.272 6.9 20 19.56 10.75 0.134 0.844 273.1 3.4 21.4
7 0.317 8.1 23 22.65 12.75 0.156 0.844 323.9 4.0 21.4
8.625 0.264 6.7 24 23.6 14 0.156 0.812 355.6 4.0 20.6
8.625 0.304 7.7 28 27.04 16 0.156 0.844 406.4 4.0 21.4
8.625 0.352 8.9 32 31.13 18 0.165 0.812 457.2 4.2 20.6
8.625 0.4 10.2 36 35.17 20 0.188 0.812 508.0 4.8 20.6
9.625 0.312 7.9 32.3 31.06 22 0.188 0.812 558.8 4.8 20.6
9.625 0.352 8.9 36 34.89 24 0.218 0.812 609.6 5.5 20.6
9.625 0.395 10.0 40 38.97 ANSI/API Spec 5L (45th Edition) PSL 1 and 2, ISO 3183:2007
10.75 0.279 7.1 32.75 31.23 ASME B36.10M-2004 and ISO 4200
10.75 0.35 8.9 40.5 38.91 Grades X-42 to X-80
10.75 0.4 10.2 45.5 44.26 Lengths 20 ft (6m) up to 60 ft (18m)
10.75 0.45 11.4 51 49.55
16 0.375 9.5 65 62.64 Other
16 0.438 11.1 75 72.86 Cold formed structural hollow sections
20 0.438 11.1 94 91.59 Welded square and rectangular steel hollow sections
20 0.5 12.7 106.5 104.23 Welded steel tubes for pressure purposes
20 0.635 16.1 133 131.45 Steel pipe for pipelines for combustible fluids
HFW Process Bold-T&C or Plain End
API 5CT, PSL 1, ISO 11960 Underline - Plain End only
Lengths 25' to 42'
J55 and upgradable chemistries available
www.trubprom.com
Joel Johnson - Manufacturer's Representative North & South America
Joel@JohnsonPipes.com
Telephone: +1-281-216-6305
Wall Thickness
OD Inches
# per foot
OCTG Weight and Wall Range Linepipe Range
OD Inches
Wall Thickness
OD SI
Wall Thickness