SAEINDIA is an international organization with over 110,000 members in over 100 countries. It has over 50,000 members within India across various sections. The presentation provides details on SAEINDIA's student membership programs and activities, which have seen considerable growth over the past few years. It outlines various competitions, training programs, factory visits, and other initiatives organized by SAEINDIA to engage students and help develop skills needed for careers in the automotive industry.
The document describes a 104 year old society with over 110,000 members across more than 100 countries. It offers various programs and events to engage students and professionals in the automotive industry, including competitions, training, lectures, seminars, and networking opportunities. The society also supports science education programs in schools and career development for students interested in automotive careers.
The prototype is an idea which uses the property of an electromagnet by virtue of which it changes the polarity of its poles whenever the direction of current is changed. This variation in polarity is utilized to attract or repel the permanent magnet attached to the piston. The usage of relay and timer will limit the output of the engine. By using an ECU in the engine instead, power can be obtained on each stroke which will result in an increased output.
Yamaha Motor Corporation was founded in 1955 in Iwata, Japan by Genichi Kawakami and initially produced motorcycles. It has since expanded into other vehicles and machinery, focusing on recreational vehicles, industrial machinery, and smart powered vehicles. Yamaha aims to strengthen its product lines in these areas while targeting rural markets and promoting sustainability and local talent development. Its financial reports from 2012-2014 show increasing annual net sales and net profits.
Get insights into the marketing strategy of Maruti Nexa through its Portfolio, Marketing Activities, competitors, STP, Value Chain, and SWOT Analysis. We have also given some suggestions with proof of a customer survey that we had conducted in the process of preparing this report.
The document describes the design process for a 9-speed gearbox with an input speed range of 180-1800 rpm. It involves calculating the step ratio, selecting standard step ratios, choosing the output speeds, determining the input speeds for each stage, developing the kinematic arrangement, and calculating the number of teeth for each gear. The step ratio was determined to be 1.06. The output speeds were calculated to be 180, 236, 315, 425, 560, 750, 1000, 1320, 1800 rpm. The number of teeth for each gear were determined to satisfy the speed ratios between meshing gear pairs in the two-stage gearbox.
1. The document outlines the design specifications and rules for an all-terrain vehicle (ATV) racing competition. It includes requirements for dimensions, materials, driver safety, speeds, and allowed pre-fabricated parts.
2. Detailed specifications are provided for the vehicle's 10HP engine, roll cage made of chromoly steel, dimensions, weights, double wishbone front and rear suspension systems, rack and pinion steering, disc brakes, and 4-speed transmission.
3. Performance targets include minimum weight, desirable traction, maximum gradeability, reduced rolling resistance, and optimized braking. 2D drawings and 3D models illustrate the vehicle design.
Dr Matani- Latest Advancements in electric vehicles (2) (1)[P-copy.pptRk Sharma
The document summarizes recent advancements in electric vehicle technology. It discusses how lithium-ion batteries have enabled a rise in electric vehicles over the past 100 years. Current developments include decreased battery costs, increased range and efficiency, and expanded charging infrastructure. The future of electric vehicles is promising, with innovations occurring in industries like racing, motorcycles, trucks, boats and airplanes. Recent models launched by Toyota, BYD, Volkswagen, Volvo and others incorporate advanced battery safety features and driving assist technologies. The global electric vehicle market is projected to grow substantially in coming years.
The document describes a 104 year old society with over 110,000 members across more than 100 countries. It offers various programs and events to engage students and professionals in the automotive industry, including competitions, training, lectures, seminars, and networking opportunities. The society also supports science education programs in schools and career development for students interested in automotive careers.
The prototype is an idea which uses the property of an electromagnet by virtue of which it changes the polarity of its poles whenever the direction of current is changed. This variation in polarity is utilized to attract or repel the permanent magnet attached to the piston. The usage of relay and timer will limit the output of the engine. By using an ECU in the engine instead, power can be obtained on each stroke which will result in an increased output.
Yamaha Motor Corporation was founded in 1955 in Iwata, Japan by Genichi Kawakami and initially produced motorcycles. It has since expanded into other vehicles and machinery, focusing on recreational vehicles, industrial machinery, and smart powered vehicles. Yamaha aims to strengthen its product lines in these areas while targeting rural markets and promoting sustainability and local talent development. Its financial reports from 2012-2014 show increasing annual net sales and net profits.
Get insights into the marketing strategy of Maruti Nexa through its Portfolio, Marketing Activities, competitors, STP, Value Chain, and SWOT Analysis. We have also given some suggestions with proof of a customer survey that we had conducted in the process of preparing this report.
The document describes the design process for a 9-speed gearbox with an input speed range of 180-1800 rpm. It involves calculating the step ratio, selecting standard step ratios, choosing the output speeds, determining the input speeds for each stage, developing the kinematic arrangement, and calculating the number of teeth for each gear. The step ratio was determined to be 1.06. The output speeds were calculated to be 180, 236, 315, 425, 560, 750, 1000, 1320, 1800 rpm. The number of teeth for each gear were determined to satisfy the speed ratios between meshing gear pairs in the two-stage gearbox.
1. The document outlines the design specifications and rules for an all-terrain vehicle (ATV) racing competition. It includes requirements for dimensions, materials, driver safety, speeds, and allowed pre-fabricated parts.
2. Detailed specifications are provided for the vehicle's 10HP engine, roll cage made of chromoly steel, dimensions, weights, double wishbone front and rear suspension systems, rack and pinion steering, disc brakes, and 4-speed transmission.
3. Performance targets include minimum weight, desirable traction, maximum gradeability, reduced rolling resistance, and optimized braking. 2D drawings and 3D models illustrate the vehicle design.
Dr Matani- Latest Advancements in electric vehicles (2) (1)[P-copy.pptRk Sharma
The document summarizes recent advancements in electric vehicle technology. It discusses how lithium-ion batteries have enabled a rise in electric vehicles over the past 100 years. Current developments include decreased battery costs, increased range and efficiency, and expanded charging infrastructure. The future of electric vehicles is promising, with innovations occurring in industries like racing, motorcycles, trucks, boats and airplanes. Recent models launched by Toyota, BYD, Volkswagen, Volvo and others incorporate advanced battery safety features and driving assist technologies. The global electric vehicle market is projected to grow substantially in coming years.
Pankaj Dogra completed an industrial internship at TrellebrogVibracoustic (India) Private Limited in Mohali where he gained valuable experience in various departments. The internship objectives included understanding marketing strategies, product comparisons, and corporate culture. During the internship, Pankaj identified molding defects, undertook a project analyzing injection molding defects, and learned about safety practices and customer satisfaction. The internship provided an excellent opportunity to develop managerial skills within a corporate environment.
Group 7's project is an automatic sand filter machine. It uses a horizontally mounted motorized shaft connected to a filter frame with mesh. As the motor turns the shaft, it reciprocates the filter frame to separate sand from unwanted particles. Components include a mesh filter, motor, mounts, connecting rod and supporting frame. Calculations were done to determine the required motor power and efficiency. The total estimated cost is Rs. 6500. The automated design aims to reduce time, effort and costs compared to manual sand filtering.
This document introduces automobiles and their components. It categorizes automobiles based on their purpose, load capacity, fuel used, and drive type. The basic components of automobiles discussed include the power plant, transmission system, auxiliaries, controls, and superstructure. Automobile body constructions can be framed, frameless, or unitized. Modern automobiles include various safety features like airbags, ABS, and rearview cameras.
The automobile industry in India has grown significantly over the past few decades. It began with only two major players and licensed manufacturing in the initial years. In the 1980s, more companies entered the market and government support increased. In the 1990s, delicensing led to more players and easier financing, creating a buyers market. Domestic sales and exports have grown strongly in recent years, with India now among the top global markets. Motorcycles dominate two-wheeler sales while passenger vehicles lead exports. Key players hold major shares in different vehicle segments. The industry faces challenges around infrastructure and customer expectations but benefits from favorable demographics and policy support focused on areas like product development, manufacturing, and supply chains.
The document provides specifications for various Maruti Suzuki vehicles, including the Maruti 800, Alto, Alto K10, Omni, Estilo, A-Star, Eco, and Grand Vitara. Key details summarized include the engine displacement and configuration, maximum power and torque outputs, dimensions, fuel tank capacity, and other technical specifications. The document appears to be submitted by students for an Automobile Engineering course and provides detailed technical specifications for various Maruti Suzuki models.
This document provides an overview of electric scooters, including their history, types, and factors to consider when purchasing one. It discusses how electric scooters work using a battery and motor for power rather than gas. There are various types including electric kick scooters, mobility scooters, bicycles, wheelchairs, and go-karts. When choosing a scooter, one should consider the intended purpose, desired speed and weight capacity, features, price, quality, and safety gear. Electric scooters are a more environmentally friendly transportation option compared to gas vehicles and their popularity has grown over the past century since being conceived in 1895.
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze how the economic feasibility of kinetic energy recovery systems is slowly becoming better through improvements in batteries, hydraulic pumps, and flywheels. Many of these systems are currently used in Formula 1 race cars because they enable these cars to achieve higher acceleration and longer times between pit stops. For consumers, flywheels may become the energy storage technology of choice for vehicles particularly as improvements in carbon nanotubes and graphene occur.
The rates of improvement for energy and power storage densities for batteries have been very slow and those of flywheels have been much faster. One of the reasons for the rapid improvements in the densities for flywheels is that improvements in the strength per weight of materials have enabled faster rotations and the storage densities are a function of rotation velocities squared. As shown in the slides, carbon fiber has about four times the strength to weight ratio and seven times the energy density of glass. Since carbon nanotubes have strength to weight ratios 15 times higher and graphene has ones 30 times higher than do carbon fiber, energy storage densities of 120,000 kJ/kg or 33.6 kWh are possible with graphene. This energy density is about 100 times higher than is currently available from lithium-ion batteries.
This document discusses the Society of Automotive Engineers (SAE) International and SAE India. SAE International is a global professional association for engineering professionals that works to solve technical problems and develop engineering standards, especially for the automotive industry. SAE India is its Indian affiliate that focuses on the mobility industry in India. Both organizations host various collegiate design competitions annually and provide resources and opportunities for students and engineers.
Go karting project report Degree levelAniket pawar
This document discusses go-karts, which originated in the 1950s as simple homemade vehicles built for recreation. Go-karts are now a multi-billion dollar industry. They are typically small, lightweight vehicles powered by small engines that can travel over rough terrain at speeds up to 20 mph. The document discusses the components of go-karts, including their chassis, engine, steering, transmission, tires, brakes, and electric starter. It also discusses the history and growth of go-kart racing internationally and its emerging popularity in India.
The document describes a capstone project for a nut sorting machine. It was undertaken by Manpreet Singh at Lovely Professional University under the guidance of Mr. Harinder Pal Singh. The project involved designing a mechatronics system that can sort nuts of different sizes and types using sensors, motors, and electronic components. The machine works by detecting the size of a nut's shadow and dispensing it into the appropriate bin.
The document provides an overview of the Department of Mechanical Engineering at a university. It details the department's vision, mission, background including programs offered and faculty profile, strengths such as research output and facilities, and future plans including new courses and facilities to be procured. The department has a strong research focus as seen in projects, publications, citations and collaborations both national and international. It aims to further develop its research capabilities and consultancy areas.
The document provides information about different types of clutches used in transmission systems. It discusses the functions of transmission systems and defines what a clutch is. It then describes various types of clutches in detail, including positive clutches, friction clutches, single plate clutches, multi plate clutches, diaphragm clutches, centrifugal clutches, and free wheel clutches. It also discusses the requirements, location, and actuating mechanisms of clutches.
This document provides an analytical report on an employee satisfaction survey conducted at National Engineering Industries Limited in Jaipur, India. It begins with an introduction to the company, which manufactures bearings. It then discusses the objectives, methodology and data collection process for the employee satisfaction survey. The majority of the document consists of a data analysis chapter that analyzes the results of the employee satisfaction survey. It concludes with suggestions for improving employee satisfaction based on the findings.
New product devlopment process of TATA NANOMehul Rasadiya
1) Tata Motors developed the Tata Nano car to provide affordable transportation for low-income families in India who could not afford cars but traveled by scooter.
2) The concept was developed through customer interviews and market testing potential designs. A small four-wheeled car was selected that met safety and regulatory requirements.
3) A business analysis showed Tata had advantages as the only company providing the lowest-priced car, with local sourcing of parts reducing supplier bargaining power and few substitutes available.
Tyres and wheels play several important roles in vehicles. Tyres provide cushioning from rough roads, allow steering and braking, and provide traction through contact with the road surface. Proper tyre properties include good grip, low noise, load capacity, low rolling resistance, uniform wear, and shock absorption. Key tyre components include the tread, sidewalls, inner liner, and various reinforcement layers. Radial ply construction is now most common, providing benefits like reduced rolling resistance and improved handling. Wheels must be strong yet lightweight to support the vehicle and cope with road conditions while minimizing unsprung weight. Correct wheel balancing and secure mounting to the vehicle hub are also important.
This document provides information about the manufacturing processes at the Rail Wheel Factory in Bangalore, India. It describes the key steps in producing wheels, axles, and wheel sets, including: melting scrap steel in electric arc furnaces, casting steel wheels in molds, forging axles from billets, heat treating wheels and axles, and assembling wheel sets by pressing wheels onto axles. It also discusses the large electricity usage at the factory and quality assurance processes to meet standards.
this presentation is on royal enfield with respect to the Counsumer behaviour & attitude of counsumer towards royal enfiled. this will give you inside about royal enfield.
Siddharth Garkhail is seeking a position that provides opportunities for continuous learning and development. He has over 2 years of experience in design and quality engineering roles. His experience includes designing custom vehicles for Dreamriders Vehicles and providing software training at CADD Centre Training Services. He holds a B.Tech degree and has extensive skills in CAD tools like AutoCAD and Solidworks. He also has project experience in vehicle design competitions and an interest in automobile design, photography, and team leadership.
Презент ко Дню проектного менеджера! "Управление проектами в современном мире - взгляд IPMA" - презентация выступления Исполнительного директора IPMA на конференции "Лучшая российская практика управления проектами 2013" (Пленарное заседание) Amin Saidoun, IPMA Executive Director (пленарное)
Pankaj Dogra completed an industrial internship at TrellebrogVibracoustic (India) Private Limited in Mohali where he gained valuable experience in various departments. The internship objectives included understanding marketing strategies, product comparisons, and corporate culture. During the internship, Pankaj identified molding defects, undertook a project analyzing injection molding defects, and learned about safety practices and customer satisfaction. The internship provided an excellent opportunity to develop managerial skills within a corporate environment.
Group 7's project is an automatic sand filter machine. It uses a horizontally mounted motorized shaft connected to a filter frame with mesh. As the motor turns the shaft, it reciprocates the filter frame to separate sand from unwanted particles. Components include a mesh filter, motor, mounts, connecting rod and supporting frame. Calculations were done to determine the required motor power and efficiency. The total estimated cost is Rs. 6500. The automated design aims to reduce time, effort and costs compared to manual sand filtering.
This document introduces automobiles and their components. It categorizes automobiles based on their purpose, load capacity, fuel used, and drive type. The basic components of automobiles discussed include the power plant, transmission system, auxiliaries, controls, and superstructure. Automobile body constructions can be framed, frameless, or unitized. Modern automobiles include various safety features like airbags, ABS, and rearview cameras.
The automobile industry in India has grown significantly over the past few decades. It began with only two major players and licensed manufacturing in the initial years. In the 1980s, more companies entered the market and government support increased. In the 1990s, delicensing led to more players and easier financing, creating a buyers market. Domestic sales and exports have grown strongly in recent years, with India now among the top global markets. Motorcycles dominate two-wheeler sales while passenger vehicles lead exports. Key players hold major shares in different vehicle segments. The industry faces challenges around infrastructure and customer expectations but benefits from favorable demographics and policy support focused on areas like product development, manufacturing, and supply chains.
The document provides specifications for various Maruti Suzuki vehicles, including the Maruti 800, Alto, Alto K10, Omni, Estilo, A-Star, Eco, and Grand Vitara. Key details summarized include the engine displacement and configuration, maximum power and torque outputs, dimensions, fuel tank capacity, and other technical specifications. The document appears to be submitted by students for an Automobile Engineering course and provides detailed technical specifications for various Maruti Suzuki models.
This document provides an overview of electric scooters, including their history, types, and factors to consider when purchasing one. It discusses how electric scooters work using a battery and motor for power rather than gas. There are various types including electric kick scooters, mobility scooters, bicycles, wheelchairs, and go-karts. When choosing a scooter, one should consider the intended purpose, desired speed and weight capacity, features, price, quality, and safety gear. Electric scooters are a more environmentally friendly transportation option compared to gas vehicles and their popularity has grown over the past century since being conceived in 1895.
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze how the economic feasibility of kinetic energy recovery systems is slowly becoming better through improvements in batteries, hydraulic pumps, and flywheels. Many of these systems are currently used in Formula 1 race cars because they enable these cars to achieve higher acceleration and longer times between pit stops. For consumers, flywheels may become the energy storage technology of choice for vehicles particularly as improvements in carbon nanotubes and graphene occur.
The rates of improvement for energy and power storage densities for batteries have been very slow and those of flywheels have been much faster. One of the reasons for the rapid improvements in the densities for flywheels is that improvements in the strength per weight of materials have enabled faster rotations and the storage densities are a function of rotation velocities squared. As shown in the slides, carbon fiber has about four times the strength to weight ratio and seven times the energy density of glass. Since carbon nanotubes have strength to weight ratios 15 times higher and graphene has ones 30 times higher than do carbon fiber, energy storage densities of 120,000 kJ/kg or 33.6 kWh are possible with graphene. This energy density is about 100 times higher than is currently available from lithium-ion batteries.
This document discusses the Society of Automotive Engineers (SAE) International and SAE India. SAE International is a global professional association for engineering professionals that works to solve technical problems and develop engineering standards, especially for the automotive industry. SAE India is its Indian affiliate that focuses on the mobility industry in India. Both organizations host various collegiate design competitions annually and provide resources and opportunities for students and engineers.
Go karting project report Degree levelAniket pawar
This document discusses go-karts, which originated in the 1950s as simple homemade vehicles built for recreation. Go-karts are now a multi-billion dollar industry. They are typically small, lightweight vehicles powered by small engines that can travel over rough terrain at speeds up to 20 mph. The document discusses the components of go-karts, including their chassis, engine, steering, transmission, tires, brakes, and electric starter. It also discusses the history and growth of go-kart racing internationally and its emerging popularity in India.
The document describes a capstone project for a nut sorting machine. It was undertaken by Manpreet Singh at Lovely Professional University under the guidance of Mr. Harinder Pal Singh. The project involved designing a mechatronics system that can sort nuts of different sizes and types using sensors, motors, and electronic components. The machine works by detecting the size of a nut's shadow and dispensing it into the appropriate bin.
The document provides an overview of the Department of Mechanical Engineering at a university. It details the department's vision, mission, background including programs offered and faculty profile, strengths such as research output and facilities, and future plans including new courses and facilities to be procured. The department has a strong research focus as seen in projects, publications, citations and collaborations both national and international. It aims to further develop its research capabilities and consultancy areas.
The document provides information about different types of clutches used in transmission systems. It discusses the functions of transmission systems and defines what a clutch is. It then describes various types of clutches in detail, including positive clutches, friction clutches, single plate clutches, multi plate clutches, diaphragm clutches, centrifugal clutches, and free wheel clutches. It also discusses the requirements, location, and actuating mechanisms of clutches.
This document provides an analytical report on an employee satisfaction survey conducted at National Engineering Industries Limited in Jaipur, India. It begins with an introduction to the company, which manufactures bearings. It then discusses the objectives, methodology and data collection process for the employee satisfaction survey. The majority of the document consists of a data analysis chapter that analyzes the results of the employee satisfaction survey. It concludes with suggestions for improving employee satisfaction based on the findings.
New product devlopment process of TATA NANOMehul Rasadiya
1) Tata Motors developed the Tata Nano car to provide affordable transportation for low-income families in India who could not afford cars but traveled by scooter.
2) The concept was developed through customer interviews and market testing potential designs. A small four-wheeled car was selected that met safety and regulatory requirements.
3) A business analysis showed Tata had advantages as the only company providing the lowest-priced car, with local sourcing of parts reducing supplier bargaining power and few substitutes available.
Tyres and wheels play several important roles in vehicles. Tyres provide cushioning from rough roads, allow steering and braking, and provide traction through contact with the road surface. Proper tyre properties include good grip, low noise, load capacity, low rolling resistance, uniform wear, and shock absorption. Key tyre components include the tread, sidewalls, inner liner, and various reinforcement layers. Radial ply construction is now most common, providing benefits like reduced rolling resistance and improved handling. Wheels must be strong yet lightweight to support the vehicle and cope with road conditions while minimizing unsprung weight. Correct wheel balancing and secure mounting to the vehicle hub are also important.
This document provides information about the manufacturing processes at the Rail Wheel Factory in Bangalore, India. It describes the key steps in producing wheels, axles, and wheel sets, including: melting scrap steel in electric arc furnaces, casting steel wheels in molds, forging axles from billets, heat treating wheels and axles, and assembling wheel sets by pressing wheels onto axles. It also discusses the large electricity usage at the factory and quality assurance processes to meet standards.
this presentation is on royal enfield with respect to the Counsumer behaviour & attitude of counsumer towards royal enfiled. this will give you inside about royal enfield.
Siddharth Garkhail is seeking a position that provides opportunities for continuous learning and development. He has over 2 years of experience in design and quality engineering roles. His experience includes designing custom vehicles for Dreamriders Vehicles and providing software training at CADD Centre Training Services. He holds a B.Tech degree and has extensive skills in CAD tools like AutoCAD and Solidworks. He also has project experience in vehicle design competitions and an interest in automobile design, photography, and team leadership.
Презент ко Дню проектного менеджера! "Управление проектами в современном мире - взгляд IPMA" - презентация выступления Исполнительного директора IPMA на конференции "Лучшая российская практика управления проектами 2013" (Пленарное заседание) Amin Saidoun, IPMA Executive Director (пленарное)
Balkesh Chahar completed a summer training at Anil Special Steel Industries Limited in Jaipur where he learned about steel strip production processes and nitrogen gas storage. He has a Bachelor of Technology degree in Mechanical Engineering from JECRC, Jaipur. His work experience includes being the head coordinator of the MoonRiders club at JECRC and working as an organizing team member for an international SAE workshop. He has skills in design, simulation, and CAD software.
The document provides an introduction to Google Developer Student Clubs (GDSCs). It explains that GDSCs are student-led groups that provide learning opportunities for students related to software development, machine learning, cloud computing, and other technologies. Some benefits of joining a GDSC include access to Google resources and workshops, hands-on coding experience, resume building, networking, and more. GDSCs host tech workshops, hackathons, guest lectures, and collaborative coding projects.
The document discusses a Google Cloud Study Jam workshop held at ITS Engineering College on October 07, 2023. It introduces Google Developer Student Clubs (GDSCs) as programs that empower students to develop technical skills through activities like workshops, hackathons, and projects. The workshop agenda includes an overview of GDSCs, expectations of events and activities organized by the college's GDSC, and introductions of the GDSC leads and faculty advisor for the 2023-24 term.
SAE stands for Society of Automotive Engineers. It is an individual member driven society of mobility practitioners who's members are Individuals from the mobility community, which includes Engineers, Executives from Industry and Students.
SAEINDIA is an affiliate society of SAE International registered in India as an Indian non-profit engineering and scientific society dedicated to the advancement of mobility industry in India.
It is a in month of August 2015, it was first time SAE International President, SAEINDIA President and Chairman of SAEINDIA (Western Section) were on Same dais. The occasion was opening ceremony of new SAE INDIA Office at Wakad, Pune. A short presentation of SAE INDIA student activities was the part of agenda and hence my first attempt at Corporate Level presentation.
Academia ERP Presentation - College and University Management SystemArpit Badjatya
Academia ERP is the flagship product from Serosoft Solutions. Serosoft is a leading educational software and solutions company, promoted by a dynamic team of erstwhile I-Bankers, US graduates and MBA’s. We are part of the prestigious 50-year old Hindustan Group of Companies (www.hindustangroup.com). Our out-of-the-box and customized solutions are helping scores of institutions and corporates - globally- overcome their educational and learning challenges and to drive innovation.
Jay Ramesh Merja is seeking a position to enhance his knowledge and serve an organization. He has experience in organizational growth and development, people management, resource management, and data analysis. He has a PhD in Business Management and Entrepreneurship from Sardar Patel University. He is currently the founder of MUVR Technology Private Limited and manager at Gujarat Grassroots Innovations Augmentation Network. He has published papers and participated in conferences on topics related to entrepreneurship, women entrepreneurship, and railway networks.
Dantu Sai Krishna Reddy is seeking a challenging position in an esteemed organization where he can develop his skills. He has a Bachelor's degree in electronics and communication engineering and worked previously as a market analyst. Some of his responsibilities included performing market research and analysis to assess business opportunities and generating monthly reports. He is proficient in software like Hadoop, Pig, and SQL. He has experience organizing technical events and working on projects related to vehicle speed control using RF sensors.
The document summarizes an introductory session for the Google Developer Student Club (GDSC) at FAST NUCES - CFD Campus. It introduces the current and former GDSC leads, provides an overview of what the day's session will entail, including an introduction to GDSC, what they do, why students should join, and an upcoming activity. It also advertises some community events hosted by Google and the Solution Challenge program timeline.
1) The document announces an upcoming unveiling event and introductory session about Google Developer Student Clubs (GDSCs) at Arka Jain University - Jamshedpur. 2) It provides information on what GDSCs are, the benefits of joining, and introduces the GDSC lead and faculty advisor at the university. 3) Details are given about exciting upcoming events and opportunities through the GDSC, including workshops, hackathons, and a cloud computing campaign from Google.
The document discusses the SAEINDIA National Student Convention 2010. It provides details on the objectives and format of the convention, including contests and sponsorship opportunities. Previous conventions are summarized, noting growing participation from colleges and students. The convention aims to showcase student capabilities, share experiences, and motivate involvement in automotive sciences. It provides opportunities for students, colleges, divisions, members, sponsors.
The document discusses GINI Industry Relations and its goals of connecting IEEE student members with industry through various activities to provide exposure, educate students on industry trends and challenges, and promote cooperation between students and industry. It outlines how industries want to engage with students through technical talks, workshops, contests, and providing internships/jobs. It also describes a pilot activity with Microsoft delivering talks, quizzes and software access to help enhance students' employability. Finally, it notes other companies like IBM and HP have interest in participating to provide wider student-industry exposure opportunities.
HERES THE BIG NEWS The most awaited INFO SESSION is happening拾
Sit back with your coffee and snacks and relaxingly enjoy our session loaded with all the information about our club and a lot of fun events朗!! Join the session without fail and RSVP now for booking your seat! As per our Event Agenda, the following will be the topics discussed:
Club events: Exciting hackathons, webinars, programs and challenges awaiting your participation拾✨
Projects: Real world problems that need your contribution as open source projects
Different teams: 10+ Exciting teams for you to join料易♀️!!
Programs: Google technologies and events coming right through your way this year
What we will discuss?
✅ Club introduction
✅ How to become a member
✅ Benefits of being a member
✅ Fun activities
✅ Team introductions
✅ Event discussions
DO NOT miss the first ever session of GDSC in Sri Sairam Engineering College!
What are you waiting for? RSVP for the event to join the event
LinkedIn: www.linkedin.com/in/google-dsc-3417b8219/
VTU and iCMG will be initiating several programmes which will not only create a substantial resource pool base, but also will become a leading-edge research and excellence center.
The partnership will embolden VTU initiatives in providing industry-centric education, create vast resource pool base and capacity building for the global industry which is looking for students with better and enhanced skill sets. The Center will focus on training programmes in the area of Enterprise and IT Architecture, research in software and enterprise architecture and consulting services by VTU team and ICMG for Government, Small & Medium Enterprises.
To initiate enhanced student interest in EA, the Center will be offering scholarships to four students every year from one of the many VTU affiliated colleges.
The document is a sponsorship brochure for K J Educational Institutes' team participating in BAJA SAEINDIA 2014. BAJA SAEINDIA is an annual engineering design competition that challenges student teams to design, fabricate, and test a single-seat off-road vehicle. The brochure provides information on the benefits of sponsoring the team, including business promotion, media exposure, identification with youth, and supporting engineering talent. It outlines sponsorship levels from elite to silver and the associated benefits and recognition. The total estimated cost for manufacturing the vehicle is 515,000 Indian rupees. Contact information for the team is also provided.
Siva Kumar G is seeking a role that utilizes his competencies and allows him to contribute as a profitable asset. He has an MBA and B.E. in computer science. For his UG project, he designed an online engineering examination system that allows students to type long answers. His PG summer project studied the light commercial vehicle industry and market segments. His main project examined customer opinions of a finance company's vehicle financing services. He is proficient in languages like C, C++, Java, C# and databases like MS Access and SQL.
Tech Talk, "Let's grow with us" with GDSC MalikiDwiWahyuFernanda
GDSC Maliki is a student club at UIN Maulana Malik Ibrahim Malang that is focused on Google developer technologies. The club was launched in 2017 with the goal of helping university students develop skills for technology careers. GDSC Maliki organizes workshops, webinars, and projects to provide learning opportunities for members. Their target members are UIN Malang students who have an interest in technology and want to further explore developer tools and platforms.
The document provides information about the Google Developer Student Club (GDSC) at ITS Engineering College. It summarizes that GDSC is a Google program that empowers students to enhance technical skills through workshops, hackathons, and events. It then lists the role and names of the GDSC lead and core team for the upcoming 2023-24 term and mentions an upcoming info session timeline and events.
Satyendra Swami is seeking a career opportunity where he can apply his knowledge and skills as a recent mechanical engineering graduate. He has a Bachelor of Engineering degree from Venus International College of Technology with percentages ranging from 5.9-8.55 across 8 semesters. His internship and projects include work on compressed air vehicles, refrigeration systems, and solar electric vehicles. He has experience with AutoCAD, networking, Microsoft Office, and has participated in workshops, seminars, and industrial visits covering various mechanical engineering topics. His areas of interest include power plants, heat transfer, pumps/turbines, and automobiles.
Similar to SAEINDIA Southern Section Presentation-New (20)
2. Date: 07-03-2013 Slide no: 2
Knowledge based Society, Global Presence
More than 110,000 members
in more than 100 countries
International body serving society
Timely consensus standards
Life long education
Advancing mobility community through
Development of Information
Dissemination of Information
Purpose
Vision
3. Date: 07-03-2013 Slide no: 3
More than 50,000 members
Countrywide Presence
Sections
Northern
Eastern
Western
Southern
Bangalore
Division
Coimbatore
Hyderabad
Indore
Nashik
4. Date: 07-03-2013 Slide no: 4
Membership Base
Regular Member Activities
Student Member Activities
Student Members & Clubs
Substantial Increase
Regular Members
- Considerable Increase
The success story continues
New Initiatives
- Yielded Good results
5. Date: 07-03-2013 Slide no: 5
Membership data
Regular Member Base as on 31st Jan 2013
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2011 2012 2013
850
1829
1687
Healthy Trend as the increase in Regular Members
6. Date: 07-03-2013 Slide no: 6
Membership data
Student Member Base as on 31st Jan 2013
Increase due to Career start, Supra SAE, Baja SAE & other student activities
0
3000
6000
9000
12000
15000
18000
2011 2012 2013
17243
19921 21732
7. Date: 07-03-2013 Slide no: 7
Collegiate Clubs
Collegiate Clubs Base as on 31st Jan 2013
0
20
40
60
80
100
120
2011 2012 2013
104
135 145
Increase due to Career start, Supra SAE, Baja SAE & other student activities
9. Date: 07-03-2013 Slide no: 9
Competitions
Training programs, SAETrek
Industry Visits, Expert Speakers
Scholarships, Mentoring, aSOP, Career Start
Lecture Meetings
Professional Development Programs
Seminars / Conferences
Networking Industry, Institutions and Academy
Life Long engagement and education
Activities of SAEINDIA SS
10. Date: 07-03-2013 Slide no: 10
Student Convention
SAE COLT
Faculty Advisor Forum
Student Executive Council
Faculty Executive Council
Factory Visits
SAEISS TREK
BAJA SAEINDIA
Supra SAEINDIA
Life Long engagement and education
Engineering Student & Collegiate
Club Activities
11. Date: 07-03-2013 Slide no: 11
Rally point for year round activities and achievements
Two days event
First day: Finals of all contests
Second day: Concluding function
In the side lines
Exhibition of Collegiate clubs
Technology Theatre
Faculty Advisors Forum
Club Officers Forum
Previous Six editions: high participation > 1,200 students
Next Edition in CBIT, Hyderabad October 2012
12. Date: 07-03-2013 Slide no: 12
Opportunity to all students in relevant areas
9 Competitions
Quiz
Technical paper
Modeling and Animation
Analysis
Computer Aided manufacturing
Aeromodel
Student Business Plan
Data Acquisition and Control graphic design
Robotic combat vehicle
Three tier format to provide opportunity for all students
College Division Finals
13. Date: 07-03-2013 Slide no: 13
Student Convention 2011
Conducted at K.S. Rangasamy College of Technology, Thiruchengode - September
31st & 1st October 2011
About 1000 students & 59 Collegiate Clubs participated in the convention
14. Date: 07-03-2013 Slide no: 14
Student Convention 2012
Conducted at CHAITANYA BHARATHI INSTITUTE OF TECHNOLOGY, Hyderabad on
5th & 6th October 2012
About 1200 students & 49 Collegiate Clubs participated in the convention
15. Date: 07-03-2013 Slide no: 15
Motivating students to indulge in automotive in a eco-friendly way
Enjoyable experience
Appreciated by students and faculty
Two days program
First day: Effective Communication, Leadership & Team
Building Skills, SEC Members, Career Guideline, Industry
Knowledge
Second day: Trekking
Message and training, Nature and adventure
16. Date: 07-03-2013 Slide no: 16
SAEISS COLT
31st March & 1st April 2012 the SAE COLT was conducted at St.
Xavier's Catholic College of Engineering, Nagercoil.
17. Date: 07-03-2013 Slide no: 17
SAEISS COLT
2nd & 3rd March 2013 the SAE COLT was conducted at Chennai
Institute of Technology, Chennai
18. Date: 07-03-2013 Slide no: 18
Motivating faculty to indulge in automotive in a eco-friendly way
Enjoyable experience
Appreciated by faculty
One days program
First day: Automotive Industry, Industry Based Curriculum
development, University facility sharing / New facility
creation with Industry, Specific Conference
19. Date: 07-03-2013 Slide no: 19
Faculty Advisor Forum
27th November 2012 the Faculty Advisor Forum was conducted at Renault Nissan
Technology & Business Centre India Pvt Ltd, Chennai.
20. Date: 07-03-2013 Slide no: 20
Student Executive Council
2012-13
20 Students from different colleges has been selected as Executive Council
Members
Faculty Advisor Executive Council
2012-13
19 Faculty from different colleges has been selected as Executive Council
Members
21. Date: 07-03-2013 Slide no: 21
Opportunity to see what happens in the industry
Organizing visits to core automotive companies
OEMs
Tier-1 companies
Test facilities
At least 2 visits a month
For every visit
Above 30 students from different colleges
4 faculty advisors
Nearly 20 organizations supporting factory visits
The list is growing rapidly
22. Date: 07-03-2013 Slide no: 22
Factory Visits
Number of factory visits made by student member= 113
Number of student members benefited = 3020
23. Date: 07-03-2013 Slide no: 23
Motivating students to indulge in automotive in a eco-friendly way
Enjoyable experience
Appreciated by students and faculty
Two days program
First day: training
Second day: trekking
Message and training,
Nature and adventure
24. Date: 07-03-2013 Slide no: 24
SAEISS TREK
Number of TREK made by student member= 26
Number of student members benefited = 1250
25. Date: 07-03-2013 Slide no: 25
Comprehensive learning experience for students
100 of teams in last edition
140 teams would participate in 2012 edition
Competitions for the student
Design
Build and
Race
an all terrain vehicle
Annual event started in 2007
Next edition in February 2013
26. Date: 07-03-2013 Slide no: 26
Baja SAEINDIA Competition
Number of teams participated last year = 23
Teams participating for Physical Baja = 26
Teams participating this year for Virtual Baja = 27
27. Date: 07-03-2013 Slide no: 27
Comprehensive learning experience for students
100 teams would participate in 2011 edition
Competitions for the student
Design
Build and
Race
Race Car Event
Annual event started in 2010
September 2012 we have the race.
Supra SAEINDIA
28. Date: 07-03-2013 Slide no: 28
Supra SAEINDIA Competition
•Number of teams participated last year = 18
• Teams participating this year for Supra = 20
29. Date: 07-03-2013 Slide no: 29
Recognition of students for achievement in automotive domain
Three scholarship awards
ASEI Kalpana Chawla Award
Student contributing in Aerospace
Kalpana Chawla Award
Girls student contributing in Automotive Engineering
SAEINDIA Foundation Awards
For boys and girls
KP Subramaniam endowment scholarship
For boys and girls
Well contested
Considered as prestigious
30. Date: 07-03-2013 Slide no: 30
International benefits; Indian Costs!
Value for Members of SAEINDIA
Member Status in SAE International
Access to all on-line magazines of SAE International
Free admission to meetings and networking events
Free admission to SAE International conferences
Discounted rates for
Professional Development Programs
Indian Seminars and Conferences
SAE Publications
Annual Subscription : Normal members – Rs 1400+Service Tax
Young members – Rs 1100+Service Tax
31. Date: 07-03-2013 Slide no: 31
Reference for industry, researchers and academia
Four magazines
Automotive Engineering, Off Highway, Aerospace,
Manufacturing
Enriched with
Technical papers
Industry trends
Suppliers information
Career opportunities
Articles by industry leaders
All four magazines available on-line
Which can be downloaded by the members of their own.
Magazines of SAE International
32. Date: 07-03-2013 Slide no: 32
One stop shop all automotive technical information
Members get a deep discount!
Standards
Technical papers
Text books
E-learning solutions
Application Software
Covering all aspects of automotive sciences and engineering
SAE International Publications
33. Date: 07-03-2013 Slide no: 33
Learning and Networking Event
Exclusive member benefit; Members attend free!
•On hot topics
•By industry renowned speakers
•At least one meeting a month
•Opportunity to interact with experts
•Opportunity to meet fellow mobility
practitioners
•Accompanied by high tea
10
450
8
380
0
100
200
300
400
2011 2012
34. Date: 07-03-2013 Slide no: 34
Learning, Networking Event and Showcasing events
Mobility Congress
Symposium on International Automotive Technology
Fuels and Lubricants
Automotive Infotronics
Paid programs; Members get a deep discount!
On the anvil…
Off highway vehicles
Aerospace
Vehicle Dynamics
Reliability
Number of
Programs
Participants
Important Toptech Programs:
-Introduction to
Automotive Design & Styling
(190 Participants)
-Application of Finite Element
Analysis to Automotive Parts &
Systems(Structural)
-(73 Participants)
-Design of Experiments
(44 Participants)
35. Date: 07-03-2013 Slide no: 35
Learning and Networking Event
Programs in partnership with
Academia and educational institutes
Material, Software and Tools suppliers
Paid programs; Members get a deep discount!
36. Date: 07-03-2013 Slide no: 36
Learning, Networking Event and Showcasing events
Year round programs
Covering all automotive subjects
Mostly in United States
Paid programs for non-members; Members attend free!
37. Date: 07-03-2013 Slide no: 37
Opportunity to become complete design professionals
SAEINDIA Design Academy
To nature and certify Automotive Design
Professionals
Broad overview of automotive technology and
design process
In-depth knowledge in chosen subject
Exclusive for SAEINDIA members!
38. Date: 07-03-2013 Slide no: 38
Almost all benefits of regular member; low cost!
Student Member Status in SAE International
Access to all on-line magazines of SAE International
Free admission to meeting and networking events
Free admission to SAE International conferences.
Discounted rates for
Toptech Training Programs
Indian Seminars and Conferences
SAE Publications
Special subsidized subscription to become regular member
Annual Membership Fee: Student Members – Rs 400+ Service Tax
Schemes: 1st Year-2100/2nd Year-1800/3rd Year-1500/4th Year-1200 + Service Tax
40. Date: 07-03-2013 Slide no: 40
A Forum for college level activities
Elected Club Officers
Organizing college level events
Competitions
Lecture meetings
Seminars
Training programs
Factory visits
Link between SAEINDIA and student members
Minimum Requirement: 50 student members
2 faculty advisors
SAEINDIA Collegiate Club
41. Date: 07-03-2013 Slide no: 41
Revolutionary teaching and learning experience
Science education for school children
Combines Fun and Challenge
Makes the challenges of math and science
exciting by bringing authentic engineering
design experiences into a classroom
Supported by
industry
volunteers
Nearly 400 teachers trained so far
Launched in more then 100 schools all over India
42. Date: 07-03-2013 Slide no: 42
Life Long engagement and education
AWIM Program for School Children
Number of Schools covered in AWIM program = 13
Number of students covered in AWIM program = 1606
Number of teachers trained in AWIM program = 26
Number of volunteers trained in AWIM program= 12
44. Date: 07-03-2013 Slide no: 44
AWIM Regional Olympics 2012
AWIM (A World In Motion) Regional Olympics 2012” was conducted successfully on 9th & 10th
November, 2012 at the Maharishi Vidhya Mandhir Senior Secondary School, Chetpet, Chennai
45. Date: 07-03-2013 Slide no: 45
Students interested in automotive to core automotive companies
Off-campus
Graduate recruitment program
For SAEINDIA student members
By core Automobile companies
On-line registration
Multi-location written tests
GD and interview at a central location
Fourth edition well received
Fifth edition in December 2012
46. Date: 07-03-2013 Slide no: 46
Students interested in automotive to core automotive companies
Fourth edition well received
Fifth edition in December 2012
Career Start
Sl.No Company Details Year
Benefit Student
members
1 Mahindra & Mahindra 2008 8
2 Sundram Fasteners Limited 2008 39
3 Turbo Energy 2008 21
4 Wheels India Ltd 2008 5
5 Sundaram Clayton Ltd 2008 6
6 Mahindra and Mahindra 2010 9
7 WABCO INDIA LTD 2010 19
8 Emeskay System 2010 5
9 Turbo energy Ltd 2010 20
10 WABCO INDIA LTD 2011 5
11 Emeskay System 2011 4
12 Turbo energy Ltd 2011 0
13 Rane Madras Ltd 2011 5
14 Renault Nissan 2011 11
Total 157
157 Student Members
benefit for Career start
47. Date: 07-03-2013 Slide no: 47
Students interested in automotive to core automotive companies
Fourth edition well received
Fifth edition in December 2012
48. Date: 07-03-2013 Slide no: 48
Facilitating students to become industry ready
Pilot program started November 2008
Second edition has started in March 2010
Third edition has started in March 2011
Combination of summer courses
And industry project
Starts from summer of 2nd year
Four Phases
Engineering to automotive
Supplementary reading
Automotive Application
Industry familiarization
50. Date: 07-03-2013 Slide no: 50
Inauguration of Hyderabad Division
Inauguration of SAEISS Hyderabad Division held on 6th June 2012 by
Shri Shrikant R. Marathe, President - SAEINDIA, Director – ARAI and
Dr. David Schutt, Guest of Honor, CEO, SAE International.
51. Date: 07-03-2013 Slide no: 51
Aerospace Conference
SAEINDIA Southern Section along with SAEINDIA Aerospace Board is
pleased to announce Two Day National Conference & Exposition
themed “Emerging Opportunities & Challenges in Indian Aerospace &
Defense” held on 17th &18th August 2012 at MIT Campus, Anna
University, Chennai.
54. Date: 07-03-2013 Slide no: 54
SAEINDIA Southern Section WEBSITE
www.saeiss.org
SAEINDIA Southern Section has launched
new SAEINDIA Southern Section Brand Store
for our Members
www.saeissbrandstore.com
55. Date: 07-03-2013 Slide no: 55
I request your continued
cooperation for making
YOUR / OUR SECTION
a Strong, Viable and Effective
Professional Society for serving
Mobility Fraternity in India and
strive for Excellence