1. 25010 Aughton Dr.
Spring, TX 77389
832-472-6081 rthomas78@sbcglobal.net
Marlin Robert Thomas
Objective Obtain a position within the company that would allow me to utilize my skills and
knowledge. To acquire a position that would challenge me to perform to the best of my
skills and increase my knowledge in this industry.
Experience 05/2015 – present Lectrus Corporation - Houston, TX
INSIDE SALES PROPOSAL SPECIALIST
Reading all customer projects specifications, calculating heat loads and weight.
Calculate enclosure dimensions based on equipment size and NEC code clearance
requirements.
Calculate HVAC size for cooling and heat, based on equipment heat loads and interior
building dimensions.
Generate RFQ based on individual customer needs.
09/2011 - 05/2015 Siemens Energy - Houston, TX
QUALITY CONTROL / FIELD SERVICE
SF6-GIS switchgear factory certified for assembly installation and commissioning.
Company facility representative that traveled to End-User site for PEC commissioning
and equipment warranty issues.
Assembly and working experience with medium voltage switchgear, motor control
centers, DC battery and UPS systems.
Base Inspection conformance to weld map and AWS D1.1 standards.
Paint Inspection that coatings used were to customer specification in type and thickness,
ensured proper prep and manufacturer application methods were adhered to. Ensure
powder coat line ram at 80% of max capabilities with chain time oven heat and length
wash. Ensure proper color was applied and track all mass produced parts per jobs
coated.
Electrical inspector verified all material used was in coherence with prints, depending
on building and end user location. Ensured all applications were in compliance with
NEC code, AS 3000, or IEC standards.
2. 08/2008 – 09/2011 Lectrus Corporation - Houston, TX
QUALITY CONTROL TECHNICIAN
Assembly and working experience with medium voltage switchgear, motor control
centers, DC battery and UPS systems.
Base Inspection conformance to weld map and AWS D1.1 standards.
Paint Inspection that coatings used were to customer specification in type and thickness,
ensured proper prep and manufacturer application methods were adhered to.
Electrical inspector verified all material used was in coherence with prints, depending
on building and end user location. Ensured all applications were in compliance with
NEC code, AS 3000, or IEC standards.
06/2007 – 08/2008 Texas Systems & Controls - Houston, TX
JOURNEYMAN LEAD ELECTRICIAN
Install instruments and transmitters according to schematics.
Plan layout and install rigid conduit or cable tray for instruments.
Pull wire, terminate all instruments.
Terminate PLCs and panels according to drawings.
07/2006 – 06/2007 Divin Electric - Houston, TX
JOURNEYMAN ELECTRICIAN
Managed small crews on multiple commercial projects to final completion and to ensure
each job was completed on time and on budget.
In charge of installation of small electrical jobs on several small commercial and
residential projects.
Complete service calls for commercial and residential jobs.
02/2002 – 07/2006 Elliott Electrical Services - Spring, TX
JOURNEYMAN ELECTRICIAN
Responsible for managing multiple residential and small commercial projects.
Maintained communication between my company and vendors on all projects.
Project manager for multiple crews on residential and commercial projects ensuring
completion of jobs on time and on budget.
10/2001 – 02/2002 Dawco Electric - Dover, NH
JOURNEYMAN WIREMAN
Installed rigid conduit on the Flame eye detectors inside the turbine of the Newington
Steam Powered Electrical Plant.
3. Job ended with completion of project on the projected timeline.
08/2001 – 10/2001 International Electrical Contractors - Ok. City, OK
JOURNEYMAN WIREMAN
Short-term project on GM plant in Oklahoma City. Responsible for installation of
conduit and circuitry for start stop stations along assembly line.
Disconnect and removal of old robots and installed new robots along welding and press
stations on assembly line.
Project was completed on time.
01/2001 – 07/2001 Ludvik Electric - Denver, CO
JOURNEYMAN WIREMAN
Responsible for installation of 1 ½” -4” EMT conduit, pulling 500 MCM to #12 THHN
wire, which was Phase 1.
Completed tool hook up inside the clean room of the Intel chip plant in Colorado
Springs, CO.
01/1999 – 11/2000 Viv Electric - Tomball, TX
JOURNEYMAN ELECTRICIAN
Maintained and serviced all kitchen equipment and utilities for all Fiesta stores in the
greater Houston area.
06/1998 – 12/1998 Kenmor Electric - Houston, TX
JOURNEYMAN ELECTRICIAN
Responsible for running plasta-bond rigid conduit and branch circuits for all rooftop air
conditioner units at all H.I.S.D. school projects. Jobs completed on time.
04/1997 – 05/1998 Capp Electric - Houston, TX
JOURNEYMAN ELECTRICIAN
Responsible for installation of rigid, EMT and IMC conduit for high and low voltage
panels.
Tapped primary and secondary windings on all buck and boost transformers.
Pulled and terminated branch circuits according to job prints.
08/1994 – 04/1997 Design Electric - Houston, TX
APPRENTICE ELECTRICIAN
Responsible for small daily projects and service calls with company service truck.
Completed paperwork for billing department. Maintained material stock on service
truck.
4. 09/1993 – 08/1994 Piepher Houston Electric - Houston, TX
APPRENTICE ELECTRICIAN
On-site electrician for Compaq Computer offices. Completed small inter-office changes
such as adding outlets or switches in existing offices as required.
Removed outlets and switches during office expansions.
01/1993 – 09/1993 Page Electric - Houston, TX
APPRENTICE ELECTRICIAN
Installed BX and MC cable for electric devices in multiple commercial office buildings
in Houston.
Drove a service truck with a journeyman electrician and learned trouble shooting skills
in office buildings.
06/1991 – 01-1993 Longhorn Electric - Houston, TX
APPRENTICE ELECTRICIAN
Apprenticed with a journeyman electrician installing EMT conduit on commercial
electrical projects, such as John Sealy Hospital in Galveston and San Jacinto Junior
College.
Learned terms and material names for electrical trade.
Education Aldine High School / Parkway Christian School – Diploma
3M Stress Cone Certified
IEC Code and Standards course study
Lean Manufacturing training
NEC Code Course study
5Y Safety Training
References Available upon request