Riot 250R Pro Spec Sheet Distributed by UAS
•
0 likes•75 views
This document provides specifications for an ARF FPV racer drone. It has a white gel coat carbon fiber frame with clear polycarbonate risers for durability. The drone features an STMF4 flight controller running RaceFlight/Betaflight software with integrated power regulation and distribution. It is designed for fast speeds over 75 mph and long flight times depending on the props used.
Report
Share
Report
Share
Download to read offline
Recommended
EMEA Airheads- Aruba 8.x Architecture overview & UI Navigation
EMEA Airheads- Aruba 8.x Architecture overview & UI NavigationAruba, a Hewlett Packard Enterprise company
In this presentation, we will run through the 8.x Architecture configuration model and share some UI navigation features such as managed controllers and spectrum monitoring, geolocation and maps.
Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wireless-Access/Technical-Webinar-Recording-Slides-Aruba-8-x-Architecture/td-p/302349
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908Wago ab interface_brochure
The document summarizes a WAGO-I/O-SYSTEM 750 CAN Gateway module that provides a link between CAN networks and other fieldbuses. The compact 12mm wide module supports both CANopen and SAE J1939 protocols using 11-bit or 29-bit identifiers. It can be configured as a CANopen or SAE J1939 master/slave and offers three operating modes - Mapped, Sniffer, and Transparent - for flexibility. Configuration of the module is simplified through WAGO-I/O-CHECK or pre-engineered function blocks.
Wago can gateway_brochure
The WAGO-I/O-SYSTEM 750 CAN Gateway module is a compact 12mm wide gateway that provides a link between CAN networks and other popular fieldbuses. It supports both the 11-bit and 29-bit CAN identifier protocols and can be configured as a CANopen or SAE J1939 master/slave. The module offers three operating modes - Mapped, Sniffer, and Transparent - and its configuration can be simplified through WAGO-I/O-CHECK or pre-engineered function blocks.
EMEA Airheads - Multi zone ap and centralized image upgrade
EMEA Airheads - Multi zone ap and centralized image upgradeAruba, a Hewlett Packard Enterprise company
In this presentation, we will cover basic requirements and supported topologies for Multizone AP, how to bring up APs in multi version and how the AP's image upgrade differs in 8.x
Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wireless-Access/Technical-Webinar-Recording-Slides-Multi-zone-AP-and-Centralized/td-p/308499
EMEA Airheads- Aruba OS- Mobile First Platform– Aruba OS 8.0 introduction
EMEA Airheads- Aruba OS- Mobile First Platform– Aruba OS 8.0 introductionAruba, a Hewlett Packard Enterprise company
This presentation will show how ArubaOS architecture has evolved and been modernized towards the ever growing Virtual Machine world to give mobile workers the best possible experience that is evolving into a key component of the Aruba Mobile First platform. Check out the webinar recording where this presentation was used. https://community.arubanetworks.com/t5/Wireless-Access/Airheads-Technical-Webinar-Recording-Slides-ArubaOS-8-0/m-p/278668
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908High Speed Data Transmission for Overhead Cranes – SSAB, Mobile Alabama Insta...
Presentation by Pete Kirst of Conductix & Jon Snyder of DeSHAZO Crane LLC at the 27th Crane Symposium hosted by the Association for Iron & Steel Technology
High Speed Data Transmission for Overhead Cranes – SSAB, Mobile Alabama Insta...
Presentation by Pete Kirst of Conductix & Jon Snyder of DeSHAZO Crane LLC at the 27th Crane Symposium hosted by the Association for Iron & Steel Technology
Overview of Major Aruba Switching Features incl. Smart Rate for Multi-Gig Ports
Overview of Major Aruba Switching Features incl. Smart Rate for Multi-Gig PortsAruba, a Hewlett Packard Enterprise company
The document provides an overview of HPE's campus switching portfolio and strategy. It discusses the ArubaOS-Switch software that powers HPE's switches, deployment models, HPE Smart Rate technology, and an overview of the product portfolio including the Aruba 5400R, 3810, 2920, and 2530 switch series. Integration with Aruba's wireless, SDN, and management solutions is also covered.Recommended
EMEA Airheads- Aruba 8.x Architecture overview & UI Navigation
EMEA Airheads- Aruba 8.x Architecture overview & UI NavigationAruba, a Hewlett Packard Enterprise company
In this presentation, we will run through the 8.x Architecture configuration model and share some UI navigation features such as managed controllers and spectrum monitoring, geolocation and maps.
Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wireless-Access/Technical-Webinar-Recording-Slides-Aruba-8-x-Architecture/td-p/302349
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908Wago ab interface_brochure
The document summarizes a WAGO-I/O-SYSTEM 750 CAN Gateway module that provides a link between CAN networks and other fieldbuses. The compact 12mm wide module supports both CANopen and SAE J1939 protocols using 11-bit or 29-bit identifiers. It can be configured as a CANopen or SAE J1939 master/slave and offers three operating modes - Mapped, Sniffer, and Transparent - for flexibility. Configuration of the module is simplified through WAGO-I/O-CHECK or pre-engineered function blocks.
Wago can gateway_brochure
The WAGO-I/O-SYSTEM 750 CAN Gateway module is a compact 12mm wide gateway that provides a link between CAN networks and other popular fieldbuses. It supports both the 11-bit and 29-bit CAN identifier protocols and can be configured as a CANopen or SAE J1939 master/slave. The module offers three operating modes - Mapped, Sniffer, and Transparent - and its configuration can be simplified through WAGO-I/O-CHECK or pre-engineered function blocks.
EMEA Airheads - Multi zone ap and centralized image upgrade
EMEA Airheads - Multi zone ap and centralized image upgradeAruba, a Hewlett Packard Enterprise company
In this presentation, we will cover basic requirements and supported topologies for Multizone AP, how to bring up APs in multi version and how the AP's image upgrade differs in 8.x
Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wireless-Access/Technical-Webinar-Recording-Slides-Multi-zone-AP-and-Centralized/td-p/308499
EMEA Airheads- Aruba OS- Mobile First Platform– Aruba OS 8.0 introduction
EMEA Airheads- Aruba OS- Mobile First Platform– Aruba OS 8.0 introductionAruba, a Hewlett Packard Enterprise company
This presentation will show how ArubaOS architecture has evolved and been modernized towards the ever growing Virtual Machine world to give mobile workers the best possible experience that is evolving into a key component of the Aruba Mobile First platform. Check out the webinar recording where this presentation was used. https://community.arubanetworks.com/t5/Wireless-Access/Airheads-Technical-Webinar-Recording-Slides-ArubaOS-8-0/m-p/278668
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908High Speed Data Transmission for Overhead Cranes – SSAB, Mobile Alabama Insta...
Presentation by Pete Kirst of Conductix & Jon Snyder of DeSHAZO Crane LLC at the 27th Crane Symposium hosted by the Association for Iron & Steel Technology
High Speed Data Transmission for Overhead Cranes – SSAB, Mobile Alabama Insta...
Presentation by Pete Kirst of Conductix & Jon Snyder of DeSHAZO Crane LLC at the 27th Crane Symposium hosted by the Association for Iron & Steel Technology
Overview of Major Aruba Switching Features incl. Smart Rate for Multi-Gig Ports
Overview of Major Aruba Switching Features incl. Smart Rate for Multi-Gig PortsAruba, a Hewlett Packard Enterprise company
The document provides an overview of HPE's campus switching portfolio and strategy. It discusses the ArubaOS-Switch software that powers HPE's switches, deployment models, HPE Smart Rate technology, and an overview of the product portfolio including the Aruba 5400R, 3810, 2920, and 2530 switch series. Integration with Aruba's wireless, SDN, and management solutions is also covered.New PRO Rental Range from FG Wilson
Durable, efficient and easy to operate, we've worked together very closely with our rental fleet customers to develop the new FG Wilson PRO range of rental generator sets.
Drone Building 101
RC Quadcopters, or multirotors, were on just about everyone's Christmas list. If Santa's present has left you wanting for more (or you just want to tinker!), but you don't know where to start, this course is for you. We'll cover the basics to get you started: tools you'll need, pre-planning, components and how they all go together. I will also show a sample build that features a 3DR Pixhawk flight controller, running open-source firmware ArduPilot (http://dev.ardupilot.com/) and Mission Planner (https://github.com/diydrones/MissionPlanner)
Future Onshore Wind Energy Technology
Here we contemplate some of the likely future technologies based on an analysis of the patent landscape. Many innovations have been patented but not yet made commercially available, due to the time-frame for commercial acceptance as well as testing and certification. Additional description of each technology is shown below, including the order we believe will have the greatest impact on LCOE, AEP, CapEx, and OpEx. More insight and analysis on these technology trends will be shared in our Global Wind Technology Trends Report, due out in Q3, 2017.
CustomDrives
DRS Consolidated Controls Inc. is a company with over 55 years of experience in custom drives and controls. They offer a variety of drive controllers for rotary/linear actuators and AC/DC motors that are energy efficient and utilize common components to reduce costs. DRS-CCI provides integrated solutions using both custom and commercial components that are designed for severe environments, including military specifications. Their variable frequency drives are suited for critical Navy and military applications.
Controller Area Network (CAN) Training
Controller Area Network (CAN) training covers the ISO 11898 standard of decision for car producers and Vehicle Applications. Affirmed for use as an ISO and EPA analytic network, its use keeps on developing. Controller Area Network (CAN) training covers the hypothesis, task and utilization of the CAN convention, and its applications in the car and different enterprises.
CAN is the most generally utilized car transport design. The Controller Area Network (CAN) transport is the command the car business and the CAN controllers are sold as on-chip peripherals in microcontrollers. Controller Area Network (CAN) physical layer is made out of a contorted combine multidrop link as indicated with a length going from 1,000m at 40Kbps to 40m at 1Mbp.
Who Should Attend:
Design engineers
Verification and valuation engineers
Test engineers
Programmers
Technicians
Embedded hardware and software engineers
Automotive embedded systems technicians and field engineers
Project managers
Learn about:
Principles of Controller Area Network (CAN)
Technical introduction to serial bus systems
Controller Area Network (CAN) implementation in Embedded Systems
CAN protocol and other standards such as J2284, J2411, and J1939
CAN physical and data link layers in some details
J1939/71 Recommended Practice for Vehicle Application Layer
CAN application layers standards, regulations, and implementation requirements
The SAE standards, J1939 Automotive Engineering Recommended Practice for a Serial Control and Communications Vehicle Network
CAN architecture and protocols
CAN controller programming
CAN physical and data link layers
CAN (Controller Area Network) characteristics of the physical layer (High-/Low-Speed-CAN)
Bus access methods, framing, bit timing, bit stuffing
Automotive Networks and CAN Bus topology
Principals of CSMA/CD and CSMA/CA
CAN Differential Signaling
CAN applications examples
Distributed and embedded systems in the Automotive domains
CAN Bus Use in Automotive and Agriculture
Controller Area Network (CAN) Bus J1939 Data Acquisition Methods
Controller Area Network (CAN) Training
https://www.tonex.com/training-courses/controller-area-network-can-training/
EIM Electric Valve Actuator Product Selection Guide
EIM is a recognized brand leader from Emerson Process Management – Valve Automation. The EIM brand, established in 1949, has pioneered the industry with innovation and technical performance. EIM actuators and controls have myriad applications. They are found in virtually every part of the energy and hydrocarbon processing industries – oil and gas, power, refining chemical and petrochemical. In addition, EIM actuators and controls have established a significant track record for outstanding performance in water/wastewater, food and beverage, pulp and paper, and marine applications. After undergoing rigorous quality checks, EIM products are sold and serviced through Emerson’s strategically located World Area Configuration Centers, distribution partners and knowledgeable technical service teams.
Rapid Control Prototyping Solutions
This document summarizes a presentation by Guillaume Boué of OPAL-RT on their rapid control prototyping solutions. The presentation covers an introduction to OPAL-RT, why rapid control prototyping is useful, OPAL-RT technology including their real-time computers and software interface, application highlights in areas like electric motor drives and modular multilevel converters, and a question and answer section. Key benefits outlined are finding errors early to reduce costs, easily building and tweaking control designs in real-time, and efficiently addressing power electronics, electric drive, and power systems challenges.
Commercializing RF SOI
Ron introduces himself as an enthusiast of CMOS technology. Peregrine Semiconductor is a fabless chip company that has pioneered the use of CMOS silicon-on-sapphire (UltraCMOS) for radio frequency applications. UltraCMOS provides performance on par with gallium arsenide chips but with the integration benefits of CMOS. Peregrine has developed Universal Flexible Products that can be configured for different end markets like wireless infrastructure, aerospace, test and measurement, and industrial uses.
Iai robonet network_controller_specsheet
The document summarizes ROBONET, a new type of control unit that operates robot cylinders via a field network with less wiring than past controllers. Key points:
- ROBONET controllers connect to field networks like DeviceNet, CC-Link, ProfiBus to greatly reduce wiring. They mount on DIN rails for easy installation.
- Controllers operate robot movements by specifying position, velocity, acceleration values directly or via pre-taught positions. Up to 16 axes can be controlled.
- Units are compact at 34mm wide and integrate connectors, allowing many to install with minimal space. Extension units further reduce space needs.
Aviation Ground Power Unit - MAK India and USA
MAK is the global leading manufacturer and supplier of Aviation Ground Power Unit. We offers many different solutions to your Ground Support needs. Our product support offices have been established at strategic locations across the world. We are committed to providing the highest standards of customer satisfaction, craftsmanship and quality.
9863001993 l
The DM75 is a crawler-mounted hydraulic tophead-drive blasthole drill built for productivity in mining applications. It can drill holes from 9-10 5/8 inches in diameter to depths of up to 168 feet using multi-pass rotary drilling. The drill features an insulated pressurized cab for operator comfort, easy maintenance access, and safety features like guards and shutdowns. It can be customized with different engine and compressor options.
FARO Cobalt 3D Imager
The FARO Cobalt 3D Imager is a metrology-grade, non-contact scanner which utilizes blue light technology
to capture millions of high resolution 3D coordinate measurements in seconds. Easily deployed in manual
or fully-automated workflows, Cobalt delivers fast and consistent measurements for dimensional inspection
and reverse engineering applications on parts, assemblies, and tools. Cobalt’s versatility supports a variety of deployment options including rotary table, robot, industrial inspection cells and multiple imager arrays.
Fly by-wire flight control
This document presents information on fly-by-wire flight control systems. It introduces fly-by-wire as a computer-based system that replaces mechanical flight controls with electronic signals transmitted via wires. This helps address issues with traditional mechanical systems like high weight and complexity. The document discusses the problem with existing control systems, effects of those problems, and how fly-by-wire solves them by providing advantages like increased stability, weight reduction, and easier maintenance.
Escavadeira hidraulica cat 374 dl
The document provides specifications for the 374D L Series Hydraulic Excavator. It has an operating weight of 71,132 kg and is powered by a Cat C15 ACERT engine producing 355 kW of power. It features a spacious operator station for comfort, electronic joysticks for control, and a liquid crystal display monitor. Maintenance items like filters are easily accessible and service intervals are 500 hours. A variety of work tools can be attached to increase versatility.
Weg with aegis_brochure
This document provides information on ODP NEMA Premium motors from WEG, including:
- The motors are designed for use with variable frequency drives and feature an AEGIS bearing protection ring.
- They are available in cast iron and rolled steel frames from 1 to 100 HP and voltages of 208-230/460V.
- WEG also offers compatible variable frequency drives like the CFW11 and CFW700 which are suited for controlling the motors.
Brochure AgustaWestland AW101vvip
The document provides information on the AgustaWestland AW101 helicopter for VVIP transport. Key points:
- The AW101 combines advanced technology, mission systems, and manufacturing expertise with a proven design to deliver superior performance for VVIP transport.
- It has a large, wide-body cabin that allows for customized interior layouts, a smooth ride, long range of up to 1,000 km, and capacity for up to 19 passengers.
- Safety and survivability features include crashworthy design, redundant systems, defensive aids, and the ability to withstand 20G impacts.
Presentation symmetrix vmax family with enginuity 5876
This document summarizes EMC's VMAX family of high-end storage arrays. It introduces the new VMAX 40K model which offers 3x performance and 2x scale of previous versions. It describes key software capabilities of the VMAX like FAST VP for automated tiering, federated tiered storage for managing external arrays, and enhancements to replication features. The document aims to showcase how the VMAX delivers powerful scalability and storage services for virtualized and private cloud environments.
Compare emc symmetrix vmax cat presentation
Download & Share Technology
Presentations http://goo.gl/k80oY0
Student Guide & Best http://goo.gl/6OkI77
UWash_ECE_Presentation
This document describes a torque vectoring series plug-in hybrid electric vehicle (PHEV) with the following key specifications:
- It can accelerate from 50-70 mph in 2.9 seconds, with a top speed of 85 mph and an electric range of 50 miles.
- It has a power output of 536 hp and torque of 3098 lb-ft.
- It uses torque vectoring and a fully electric drivetrain for propulsion.
Advantis v platform_brochure
ETA provide professional solution of SMT and SMT peripheral equipment.
Main euqipment include Reflow Oven, SMT Printer, AOI, Loader and Conveyor etc.
More detail plz contact us directly.
email : eta2@eta-ele.com
whatsapp/skype/wechat:+86 138 2653 4318
More Related Content
Similar to Riot 250R Pro Spec Sheet Distributed by UAS
New PRO Rental Range from FG Wilson
Durable, efficient and easy to operate, we've worked together very closely with our rental fleet customers to develop the new FG Wilson PRO range of rental generator sets.
Drone Building 101
RC Quadcopters, or multirotors, were on just about everyone's Christmas list. If Santa's present has left you wanting for more (or you just want to tinker!), but you don't know where to start, this course is for you. We'll cover the basics to get you started: tools you'll need, pre-planning, components and how they all go together. I will also show a sample build that features a 3DR Pixhawk flight controller, running open-source firmware ArduPilot (http://dev.ardupilot.com/) and Mission Planner (https://github.com/diydrones/MissionPlanner)
Future Onshore Wind Energy Technology
Here we contemplate some of the likely future technologies based on an analysis of the patent landscape. Many innovations have been patented but not yet made commercially available, due to the time-frame for commercial acceptance as well as testing and certification. Additional description of each technology is shown below, including the order we believe will have the greatest impact on LCOE, AEP, CapEx, and OpEx. More insight and analysis on these technology trends will be shared in our Global Wind Technology Trends Report, due out in Q3, 2017.
CustomDrives
DRS Consolidated Controls Inc. is a company with over 55 years of experience in custom drives and controls. They offer a variety of drive controllers for rotary/linear actuators and AC/DC motors that are energy efficient and utilize common components to reduce costs. DRS-CCI provides integrated solutions using both custom and commercial components that are designed for severe environments, including military specifications. Their variable frequency drives are suited for critical Navy and military applications.
Controller Area Network (CAN) Training
Controller Area Network (CAN) training covers the ISO 11898 standard of decision for car producers and Vehicle Applications. Affirmed for use as an ISO and EPA analytic network, its use keeps on developing. Controller Area Network (CAN) training covers the hypothesis, task and utilization of the CAN convention, and its applications in the car and different enterprises.
CAN is the most generally utilized car transport design. The Controller Area Network (CAN) transport is the command the car business and the CAN controllers are sold as on-chip peripherals in microcontrollers. Controller Area Network (CAN) physical layer is made out of a contorted combine multidrop link as indicated with a length going from 1,000m at 40Kbps to 40m at 1Mbp.
Who Should Attend:
Design engineers
Verification and valuation engineers
Test engineers
Programmers
Technicians
Embedded hardware and software engineers
Automotive embedded systems technicians and field engineers
Project managers
Learn about:
Principles of Controller Area Network (CAN)
Technical introduction to serial bus systems
Controller Area Network (CAN) implementation in Embedded Systems
CAN protocol and other standards such as J2284, J2411, and J1939
CAN physical and data link layers in some details
J1939/71 Recommended Practice for Vehicle Application Layer
CAN application layers standards, regulations, and implementation requirements
The SAE standards, J1939 Automotive Engineering Recommended Practice for a Serial Control and Communications Vehicle Network
CAN architecture and protocols
CAN controller programming
CAN physical and data link layers
CAN (Controller Area Network) characteristics of the physical layer (High-/Low-Speed-CAN)
Bus access methods, framing, bit timing, bit stuffing
Automotive Networks and CAN Bus topology
Principals of CSMA/CD and CSMA/CA
CAN Differential Signaling
CAN applications examples
Distributed and embedded systems in the Automotive domains
CAN Bus Use in Automotive and Agriculture
Controller Area Network (CAN) Bus J1939 Data Acquisition Methods
Controller Area Network (CAN) Training
https://www.tonex.com/training-courses/controller-area-network-can-training/
EIM Electric Valve Actuator Product Selection Guide
EIM is a recognized brand leader from Emerson Process Management – Valve Automation. The EIM brand, established in 1949, has pioneered the industry with innovation and technical performance. EIM actuators and controls have myriad applications. They are found in virtually every part of the energy and hydrocarbon processing industries – oil and gas, power, refining chemical and petrochemical. In addition, EIM actuators and controls have established a significant track record for outstanding performance in water/wastewater, food and beverage, pulp and paper, and marine applications. After undergoing rigorous quality checks, EIM products are sold and serviced through Emerson’s strategically located World Area Configuration Centers, distribution partners and knowledgeable technical service teams.
Rapid Control Prototyping Solutions
This document summarizes a presentation by Guillaume Boué of OPAL-RT on their rapid control prototyping solutions. The presentation covers an introduction to OPAL-RT, why rapid control prototyping is useful, OPAL-RT technology including their real-time computers and software interface, application highlights in areas like electric motor drives and modular multilevel converters, and a question and answer section. Key benefits outlined are finding errors early to reduce costs, easily building and tweaking control designs in real-time, and efficiently addressing power electronics, electric drive, and power systems challenges.
Commercializing RF SOI
Ron introduces himself as an enthusiast of CMOS technology. Peregrine Semiconductor is a fabless chip company that has pioneered the use of CMOS silicon-on-sapphire (UltraCMOS) for radio frequency applications. UltraCMOS provides performance on par with gallium arsenide chips but with the integration benefits of CMOS. Peregrine has developed Universal Flexible Products that can be configured for different end markets like wireless infrastructure, aerospace, test and measurement, and industrial uses.
Iai robonet network_controller_specsheet
The document summarizes ROBONET, a new type of control unit that operates robot cylinders via a field network with less wiring than past controllers. Key points:
- ROBONET controllers connect to field networks like DeviceNet, CC-Link, ProfiBus to greatly reduce wiring. They mount on DIN rails for easy installation.
- Controllers operate robot movements by specifying position, velocity, acceleration values directly or via pre-taught positions. Up to 16 axes can be controlled.
- Units are compact at 34mm wide and integrate connectors, allowing many to install with minimal space. Extension units further reduce space needs.
Aviation Ground Power Unit - MAK India and USA
MAK is the global leading manufacturer and supplier of Aviation Ground Power Unit. We offers many different solutions to your Ground Support needs. Our product support offices have been established at strategic locations across the world. We are committed to providing the highest standards of customer satisfaction, craftsmanship and quality.
9863001993 l
The DM75 is a crawler-mounted hydraulic tophead-drive blasthole drill built for productivity in mining applications. It can drill holes from 9-10 5/8 inches in diameter to depths of up to 168 feet using multi-pass rotary drilling. The drill features an insulated pressurized cab for operator comfort, easy maintenance access, and safety features like guards and shutdowns. It can be customized with different engine and compressor options.
FARO Cobalt 3D Imager
The FARO Cobalt 3D Imager is a metrology-grade, non-contact scanner which utilizes blue light technology
to capture millions of high resolution 3D coordinate measurements in seconds. Easily deployed in manual
or fully-automated workflows, Cobalt delivers fast and consistent measurements for dimensional inspection
and reverse engineering applications on parts, assemblies, and tools. Cobalt’s versatility supports a variety of deployment options including rotary table, robot, industrial inspection cells and multiple imager arrays.
Fly by-wire flight control
This document presents information on fly-by-wire flight control systems. It introduces fly-by-wire as a computer-based system that replaces mechanical flight controls with electronic signals transmitted via wires. This helps address issues with traditional mechanical systems like high weight and complexity. The document discusses the problem with existing control systems, effects of those problems, and how fly-by-wire solves them by providing advantages like increased stability, weight reduction, and easier maintenance.
Escavadeira hidraulica cat 374 dl
The document provides specifications for the 374D L Series Hydraulic Excavator. It has an operating weight of 71,132 kg and is powered by a Cat C15 ACERT engine producing 355 kW of power. It features a spacious operator station for comfort, electronic joysticks for control, and a liquid crystal display monitor. Maintenance items like filters are easily accessible and service intervals are 500 hours. A variety of work tools can be attached to increase versatility.
Weg with aegis_brochure
This document provides information on ODP NEMA Premium motors from WEG, including:
- The motors are designed for use with variable frequency drives and feature an AEGIS bearing protection ring.
- They are available in cast iron and rolled steel frames from 1 to 100 HP and voltages of 208-230/460V.
- WEG also offers compatible variable frequency drives like the CFW11 and CFW700 which are suited for controlling the motors.
Brochure AgustaWestland AW101vvip
The document provides information on the AgustaWestland AW101 helicopter for VVIP transport. Key points:
- The AW101 combines advanced technology, mission systems, and manufacturing expertise with a proven design to deliver superior performance for VVIP transport.
- It has a large, wide-body cabin that allows for customized interior layouts, a smooth ride, long range of up to 1,000 km, and capacity for up to 19 passengers.
- Safety and survivability features include crashworthy design, redundant systems, defensive aids, and the ability to withstand 20G impacts.
Presentation symmetrix vmax family with enginuity 5876
This document summarizes EMC's VMAX family of high-end storage arrays. It introduces the new VMAX 40K model which offers 3x performance and 2x scale of previous versions. It describes key software capabilities of the VMAX like FAST VP for automated tiering, federated tiered storage for managing external arrays, and enhancements to replication features. The document aims to showcase how the VMAX delivers powerful scalability and storage services for virtualized and private cloud environments.
Compare emc symmetrix vmax cat presentation
Download & Share Technology
Presentations http://goo.gl/k80oY0
Student Guide & Best http://goo.gl/6OkI77
UWash_ECE_Presentation
This document describes a torque vectoring series plug-in hybrid electric vehicle (PHEV) with the following key specifications:
- It can accelerate from 50-70 mph in 2.9 seconds, with a top speed of 85 mph and an electric range of 50 miles.
- It has a power output of 536 hp and torque of 3098 lb-ft.
- It uses torque vectoring and a fully electric drivetrain for propulsion.
Advantis v platform_brochure
ETA provide professional solution of SMT and SMT peripheral equipment.
Main euqipment include Reflow Oven, SMT Printer, AOI, Loader and Conveyor etc.
More detail plz contact us directly.
email : eta2@eta-ele.com
whatsapp/skype/wechat:+86 138 2653 4318
Similar to Riot 250R Pro Spec Sheet Distributed by UAS (20)
EIM Electric Valve Actuator Product Selection Guide
EIM Electric Valve Actuator Product Selection Guide
Presentation symmetrix vmax family with enginuity 5876
Presentation symmetrix vmax family with enginuity 5876
Riot 250R Pro Spec Sheet Distributed by UAS
- 1. ELECTRONICS • 250mm ARF FPV Racer • White Gel Coat carbon fiber frame • Clear polycarbonate, nearly indestructible risers in place of traditional nylon or aluminum standoffs • Easy to replace carbon fiber arms • Extremely durable SMA connector for attaching antennas which lowers the chances of damaging the video transmitter and allows quick and easy installation and removal of the antenna • Durable nylon fiberglass blend 5 in. props • Max flight time: dependent upon props • Max speed: 75+ mph MECHANICAL • STMF4 Flight Controller running RaceFlight/Betaflight • Flight camera: CCD, Wide Dynamic Range • Integrated clean power regulation • Integrated power distribution • 52 bright, addressable RDB LEDs, diffused through polycarbonate risers • Removable flight controller/OSD • Recommended battery: 3S or 4S Lipo • Multishot enabled 20Amp XM20 Speed Controller • Thrust UAV tuned race motors SOFTWARE FEATURES • Modular Integrated Flight System with on-screen display (battery voltage, battery capacity, video frequency) • Control video channels, frequency and power output via radio transmitter using the on-screen display • Integrated flight system comes pre-configured (plug and play) • Compatible with PPM, SBUS, XBUS, Spectrum R/C systems • Fully configurable via OSD, no PC required • ESC beeps when inactive for 5 minutes and can be used in a lost model situation • Configuration app: Raceflight/Betaflight SPECIFICATIONS INTRODUCING THE ALL-NEW INTRODUCING THE ALL-NEW www.riotpro.eu For more information, visit: www.riotpro.eu