RiBA CPD
•
0 likes•209 views
Galvanizers Association has educated and informed professionals within the construction industry via the provision of RIBA CPD (Continuing Professional Development) Presentations that the Association has been providing for well over 25 years. Galvanizers Association were founder members of the RIBA CPD Providers Network and work closely with RIBA for new generations within the industry. Book a RIBA CPD by clicking here: http://www.galvanizing.org.uk/riba-cpd/
Report
Share
Report
Share
Download to read offline
Recommended
Stan Ferree Resume Highlights
Stan Ferree has over 37 years of experience in welding research and development, including 27 years as Vice President and Director of R&D for ESAB Welding and Cutting Products. He has numerous significant technical achievements in developing new flux cored and metal cored electrodes, including developing the first small diameter gas-shielded flux cored electrodes and flux cored electrodes for stainless steel that can be used in all positions. Currently, he provides training and consulting services related to developing welding electrodes and reducing welding fume emissions.
CorrosionWorkshopJan2015
The document summarizes research on monitoring corrosion-induced cracking in cement-based materials. X-ray computed tomography was used to study how corrosion products migrate into pores and cracks. Nanoindentation tested the mechanical properties of rust, finding it has a lower Young's modulus that decreases with damage. Energy dispersive X-ray spectrometry identified differences in rust composition. The study showed superior crack resistance in steel fiber reinforced concrete compared to normal concrete.
ELECTRODEPOSITION OF Ni-Mg-Zn COATING BY VARYING TEMPERATURE ON MILD STEEL CH...
The document discusses electrodepositing a Ni-Mg-Zn coating on mild steel chains at varying temperatures to improve corrosion and wear resistance. Mild steel chains are commonly used for ship anchors and cranes but are susceptible to corrosion from saltwater exposure. Alternatives to chromium plating were investigated. Nickel, zinc, and magnesium were selected for their properties. The coating was applied via electrodeposition at 30°C, 50°C, and 70°C and characterized using SEM, EDS, XRD, and corrosion/wear tests. Results showed the coating improved corrosion resistance and lifetime of the steel chains.
Corrosion Engineering 2012
The document summarizes a 2-day training course on corrosion engineering. The course will cover corrosion control techniques, durability, and life extension methods. It will detail the latest technologies in corrosion control, effective monitoring and testing, and mitigation techniques. Experts will discuss protective coatings, cathodic protection measures, and minimizing corrosion to reduce costs and risks to infrastructure and facilities. The training is intended for corrosion engineers and specialists working to prevent corrosion damage in various industries.
Austenitics
This document provides an overview of the history and development of austenitic stainless steels, including high performance austenitic stainless steels (HPASS). It discusses how new steelmaking technologies in the 1970s allowed for the development of HPASS grades with improved alloying control and performance. Some of the first HPASS grades developed included 904L and AL-6X, aimed for applications requiring resistance to reducing acids and seawater, respectively. Demand for cost-effective alloys for energy and environmental industries further drove development of newer HPASS grades with very high pitting resistance, such as 654 SMO.
Silicon Carbide in Microsystem Technology — Thin Film Versus Bulk Material
Mariana Amorim Fraga, Matteo Bosi and Marco Negri (2015). Silicon Carbide in Microsystem Technology — Thin Film Versus Bulk Material, Advanced Silicon Carbide Devices and Processing, Dr. Stephen Saddow (Ed.), InTech, DOI: 10.5772/60970. Available from: https://www.intechopen.com/books/advanced-silicon-carbide-devices-and-processing/silicon-carbide-in-microsystem-technology-thin-film-versus-bulk-material
Difference Between Electro Galvanized Vs Hot Dip Galvanization Steel-Tanya G...
Difference Between Electro Galvanized Vs Hot Dip Galvanization Steel-Tanya G...Tanya/Prashant Galvanizers
This document compares and contrasts the two main types of galvanization: hot dip galvanization and electro galvanization. Hot dip galvanization involves submerging steel or iron in a bath of molten zinc, resulting in a thicker zinc coating that chemically bonds to the metal. Electro galvanization uses an electroplating process to apply a thinner zinc coating to steel through an electrochemical reaction in a zinc salt solution. The document provides details on each process and a comparison chart of the differences between hot dip and electro galvanization.Zinc Production and Galvanizing
Galvanization or galvanizing is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which the parts are submerged in a bath of molten zinc.
Recommended
Stan Ferree Resume Highlights
Stan Ferree has over 37 years of experience in welding research and development, including 27 years as Vice President and Director of R&D for ESAB Welding and Cutting Products. He has numerous significant technical achievements in developing new flux cored and metal cored electrodes, including developing the first small diameter gas-shielded flux cored electrodes and flux cored electrodes for stainless steel that can be used in all positions. Currently, he provides training and consulting services related to developing welding electrodes and reducing welding fume emissions.
CorrosionWorkshopJan2015
The document summarizes research on monitoring corrosion-induced cracking in cement-based materials. X-ray computed tomography was used to study how corrosion products migrate into pores and cracks. Nanoindentation tested the mechanical properties of rust, finding it has a lower Young's modulus that decreases with damage. Energy dispersive X-ray spectrometry identified differences in rust composition. The study showed superior crack resistance in steel fiber reinforced concrete compared to normal concrete.
ELECTRODEPOSITION OF Ni-Mg-Zn COATING BY VARYING TEMPERATURE ON MILD STEEL CH...
The document discusses electrodepositing a Ni-Mg-Zn coating on mild steel chains at varying temperatures to improve corrosion and wear resistance. Mild steel chains are commonly used for ship anchors and cranes but are susceptible to corrosion from saltwater exposure. Alternatives to chromium plating were investigated. Nickel, zinc, and magnesium were selected for their properties. The coating was applied via electrodeposition at 30°C, 50°C, and 70°C and characterized using SEM, EDS, XRD, and corrosion/wear tests. Results showed the coating improved corrosion resistance and lifetime of the steel chains.
Corrosion Engineering 2012
The document summarizes a 2-day training course on corrosion engineering. The course will cover corrosion control techniques, durability, and life extension methods. It will detail the latest technologies in corrosion control, effective monitoring and testing, and mitigation techniques. Experts will discuss protective coatings, cathodic protection measures, and minimizing corrosion to reduce costs and risks to infrastructure and facilities. The training is intended for corrosion engineers and specialists working to prevent corrosion damage in various industries.
Austenitics
This document provides an overview of the history and development of austenitic stainless steels, including high performance austenitic stainless steels (HPASS). It discusses how new steelmaking technologies in the 1970s allowed for the development of HPASS grades with improved alloying control and performance. Some of the first HPASS grades developed included 904L and AL-6X, aimed for applications requiring resistance to reducing acids and seawater, respectively. Demand for cost-effective alloys for energy and environmental industries further drove development of newer HPASS grades with very high pitting resistance, such as 654 SMO.
Silicon Carbide in Microsystem Technology — Thin Film Versus Bulk Material
Mariana Amorim Fraga, Matteo Bosi and Marco Negri (2015). Silicon Carbide in Microsystem Technology — Thin Film Versus Bulk Material, Advanced Silicon Carbide Devices and Processing, Dr. Stephen Saddow (Ed.), InTech, DOI: 10.5772/60970. Available from: https://www.intechopen.com/books/advanced-silicon-carbide-devices-and-processing/silicon-carbide-in-microsystem-technology-thin-film-versus-bulk-material
Difference Between Electro Galvanized Vs Hot Dip Galvanization Steel-Tanya G...
Difference Between Electro Galvanized Vs Hot Dip Galvanization Steel-Tanya G...Tanya/Prashant Galvanizers
This document compares and contrasts the two main types of galvanization: hot dip galvanization and electro galvanization. Hot dip galvanization involves submerging steel or iron in a bath of molten zinc, resulting in a thicker zinc coating that chemically bonds to the metal. Electro galvanization uses an electroplating process to apply a thinner zinc coating to steel through an electrochemical reaction in a zinc salt solution. The document provides details on each process and a comparison chart of the differences between hot dip and electro galvanization.Zinc Production and Galvanizing
Galvanization or galvanizing is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which the parts are submerged in a bath of molten zinc.
Galvanize_It_10_20_08.ppt
This document provides information about a seminar hosted by the American Galvanizers Association (AGA) on hot-dip galvanized steel. The seminar aims to educate architects, engineers, and specifiers about using hot-dip galvanized steel to address corrosion issues. It covers topics like the corrosion problem in North America, how galvanized steel provides barrier and cathodic protection against corrosion, the hot-dip galvanizing process, common galvanized coating specifications, and how galvanized steel can lower life-cycle costs compared to painted steel.
Galvanize_It_10_20_2022-2024-2024-----.ppt
The document announces a seminar hosted by the American Galvanizers Association to educate architects, engineers, and specifiers about hot-dip galvanized steel and how it provides effective corrosion protection. The seminar will cover corrosion issues in the US, how galvanizing protects steel from corrosion, and how to incorporate corrosion protection into design to lower lifetime maintenance costs. Attendees can earn continuing education credits for attending the seminar.
EE driving the cost out of your design
This document provides information on driving cost out of PCB designs from a PCB fabricator's perspective. It discusses key topics like material utilization and specification, surface finishes, understanding via protection, and partnering with suppliers. The presentation is given by Brett McCoy from Eagle Electronics and provides an overview of the company's history and future developments. It emphasizes understanding the fabricator's capabilities and standard processes to reduce costs and lead times.
Why use b earth®
The document discusses B-earth, a company that produces environmentally-friendly coatings. It summarizes B-earth's products and their benefits, including durability, environmental qualities with low VOC and no heavy metals, and long-term cost savings. It also outlines B-earth's vision to establish modular factories that provide job training and economic opportunities while producing coatings in a sustainable manner. The factories would utilize shipping containers and rammed earth construction, and incorporate permaculture and renewable energy.
Zinc and zinc alloy plating
An overview of zinc and zinc alloy plating technology, mainly for automotive industry. A comparison between their properties is made.
Corrosion protection
This technical bulletin discusses four methods of protecting carbon steel pipe supports from corrosion: painting, zinc coatings, hot dip galvanizing, and combinations of these. It explains that zinc coatings and galvanizing provide both barrier protection from corrosion as well as cathodic protection of the steel. Hot dip galvanizing provides greater protection than zinc coatings alone because the molten zinc reacts with the steel to form alloy layers that are harder and more corrosion-resistant. While painting can provide barrier protection, galvanizing is usually more cost effective over the long term due to its greater resistance to damage from scratches.
laserwelding
This 3-day training course provides attendees with a thorough understanding of lasers and optics used for welding and other applications. The course objectives are answered through 2 days of classroom lectures and a half-day visit to Cranfield University's laser laboratory. Attendees will learn about different laser types, optics, safety, material interactions, practical welding techniques, and properties of laser welds. They will also see demonstrations of various laser processes during the lab visit. The course is suitable for engineers and managers using or considering laser welding. It is taught by Dr. Wojciech Suder, a research fellow at Cranfield University with expertise in laser welding applications.
Concise_Eurocode_2.pdf
This document provides a concise summary of Eurocode 2 (EC2) for the design of reinforced concrete framed buildings. It aims to guide readers through the key aspects of EC2 and other relevant Eurocodes. The publication covers topics such as basis of design, materials, durability, structural analysis, bending and axial load, shear, punching shear, torsion, serviceability, detailing requirements, and design aids. It is intended to help designers transition to designing according to EC2 and the UK National Annex.
New Lindapter Product Catalog (Glaser)
Lindapter is a global company that has been innovating steel connection solutions for over 75 years. They pioneered clamping systems as an alternative to welding or drilling for connecting steel. Their products provide advantages like reduced installation time and no damage to steel coatings. Lindapter continues developing new products through research partnerships and testing to meet evolving construction needs. They offer custom engineered solutions in addition to their extensive standard product range.
16371 viva
The document summarizes a student's FYP II VIVA presentation on studying preferential weld corrosion in mild steel with acetic acid. The project aims to investigate how acetic acid and pH affect corrosion rates of weld segments. Literature review findings show that acetic acid increases corrosion by disrupting protective iron carbonate layer formation. Testing of weld specimens in brine with varied acetic acid concentrations and pH values found intrinsic corrosion highest in parent metal, while galvanic corrosion rates were highest for weld metal under some test conditions. Overall results provide insights into influences of acetic acid and pH on preferential weld corrosion.
Be2 awards Event Slides
This document summarizes the Be2Awards 2012 event and BeTalks presentations, which recognized the best uses of social media, BIM, sustainability, and other technologies in architecture, engineering and construction. It provides an agenda for the event, including 7 presentations on various related topics, as well as the winners in various categories like best use of Twitter, blogs, collaboration applications, and more. The event concluded with thanks to participants, voters, sponsors and the online audience.
Prevention Of Corrosion | Chicago Corrosion Group
The document summarizes the services provided by Chicago Corrosion Group, LLC. The company offers corrosion prevention and coating consulting services to help clients identify optimal and cost-effective corrosion prevention solutions. Services include condition surveys, root cause analysis, solution identification, specifications development, project management, quality control, and general contracting. The company aims to act solely in the clients' best interests and help them reduce costs with solutions that have low maintenance, high durability, and good performance.
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...
Aggregating decades of interconnectivity knowledge, Northwire, Inc. (NWI) along with its partner The LEMO Group, has released Part IV of their “Extreme Environments, Complex Requirements” white paper series, titled “Extreme Materials: Robust Performance from Cable to Connector.”
Gb2011 murray cook_egga
Galvanized steel provides long-term durability for construction works with relatively low environmental impact. The EU Construction Products Regulation emphasizes sustainable use of resources, including durability of materials. A case study of the Stainsby Hall Bridge in the UK found the galvanized steel beams maintained a coating thickness above the minimum standard after 24 years with an expected maintenance-free life of over 75 years. Galvanizing offers sustainability benefits through reduced maintenance needs and associated impacts.
Corrosion Consulting
Corrosion consulting aims to positively impact society by reducing corrosion effects, which can impact product quality, equipment life, safety, and the environment. The purpose is to offer expert corrosion consulting services to categorize corrosion issues, risks, and solutions by inspecting sites, determining failure causes, and providing materials selection guidance, training, and testimony.
A REVIEW OF STUDY ON CORROSION BEHAVIOUR OF ZINC COATED MILD STEEL
The document reviews studies on the corrosion behavior of zinc-coated mild steel. Zinc coating is commonly used to protect mild steel from corrosion by acting as a sacrificial anode. Several techniques for applying zinc coatings are discussed, including electroplating, cold spraying, and using zinc alloys. Research has found that zinc coatings improve corrosion resistance of mild steel in various environments like salt water. Thicker zinc coatings and post-treatment processes like heat treatment can further enhance corrosion protection. Zinc-coated mild steel performs better than uncoated mild steel in corrosive environments.
New Loctite® 4090™ Structural Instant Adhesive Hybrid — Combines Speed and St...
Loctite® 4090™ is a new patented hybrid adhesive from Henkel Corporation. Loctite® 4090™ combines the bond strength of a structural epoxy with the speed of an instant adhesive. Join this webinar to learn more about the many unique benefits of Loctite® 4090™ and how this innovative hybrid adhesive can solve your design and assembly challenges.
cv
Greg Turner is a welder from Lochgelly, Fife, Scotland. He has over 10 years of experience as a welder, including 5 years at Burntisland Fabrications and over 3 years at Subsea 7. He has extensive experience and qualifications in TIG, MIG, flux core, and manual MMA welding of materials like carbon steel, stainless steel, duplex steel, and inconel. His reference is James Coyle, Welding Superintendent at Subsea 7.
Home
Dan's Certified Welding specializes in gas tungsten arc welding (GTAW or TIG welding), a precise welding process using a tungsten electrode and argon gas. They also offer micro TIG welding, which uses a microscope for even finer work, and orbital tube welding of aircraft hydraulic lines. Dan's Certified Welding strives to provide excellent customer service and consultation in addition to high quality welds certified to various industry standards.
Current Resume
This document is a resume for James Olszewski, a metallurgist with extensive experience in various metallurgy roles including research, production, and management. He has worked for companies such as Alcoa and Heraeus in positions involving aluminum casting, extrusion, heat treating, alloy development, and startup of new facilities. Notable accomplishments include serving as chief metallurgist for the startup of a $1.5 billion aluminum smelter in Iceland and developing new memory alloys for computer hard drives while working in Singapore. He holds various certifications and has received awards for technical excellence.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
More Related Content
Similar to RiBA CPD
Galvanize_It_10_20_08.ppt
This document provides information about a seminar hosted by the American Galvanizers Association (AGA) on hot-dip galvanized steel. The seminar aims to educate architects, engineers, and specifiers about using hot-dip galvanized steel to address corrosion issues. It covers topics like the corrosion problem in North America, how galvanized steel provides barrier and cathodic protection against corrosion, the hot-dip galvanizing process, common galvanized coating specifications, and how galvanized steel can lower life-cycle costs compared to painted steel.
Galvanize_It_10_20_2022-2024-2024-----.ppt
The document announces a seminar hosted by the American Galvanizers Association to educate architects, engineers, and specifiers about hot-dip galvanized steel and how it provides effective corrosion protection. The seminar will cover corrosion issues in the US, how galvanizing protects steel from corrosion, and how to incorporate corrosion protection into design to lower lifetime maintenance costs. Attendees can earn continuing education credits for attending the seminar.
EE driving the cost out of your design
This document provides information on driving cost out of PCB designs from a PCB fabricator's perspective. It discusses key topics like material utilization and specification, surface finishes, understanding via protection, and partnering with suppliers. The presentation is given by Brett McCoy from Eagle Electronics and provides an overview of the company's history and future developments. It emphasizes understanding the fabricator's capabilities and standard processes to reduce costs and lead times.
Why use b earth®
The document discusses B-earth, a company that produces environmentally-friendly coatings. It summarizes B-earth's products and their benefits, including durability, environmental qualities with low VOC and no heavy metals, and long-term cost savings. It also outlines B-earth's vision to establish modular factories that provide job training and economic opportunities while producing coatings in a sustainable manner. The factories would utilize shipping containers and rammed earth construction, and incorporate permaculture and renewable energy.
Zinc and zinc alloy plating
An overview of zinc and zinc alloy plating technology, mainly for automotive industry. A comparison between their properties is made.
Corrosion protection
This technical bulletin discusses four methods of protecting carbon steel pipe supports from corrosion: painting, zinc coatings, hot dip galvanizing, and combinations of these. It explains that zinc coatings and galvanizing provide both barrier protection from corrosion as well as cathodic protection of the steel. Hot dip galvanizing provides greater protection than zinc coatings alone because the molten zinc reacts with the steel to form alloy layers that are harder and more corrosion-resistant. While painting can provide barrier protection, galvanizing is usually more cost effective over the long term due to its greater resistance to damage from scratches.
laserwelding
This 3-day training course provides attendees with a thorough understanding of lasers and optics used for welding and other applications. The course objectives are answered through 2 days of classroom lectures and a half-day visit to Cranfield University's laser laboratory. Attendees will learn about different laser types, optics, safety, material interactions, practical welding techniques, and properties of laser welds. They will also see demonstrations of various laser processes during the lab visit. The course is suitable for engineers and managers using or considering laser welding. It is taught by Dr. Wojciech Suder, a research fellow at Cranfield University with expertise in laser welding applications.
Concise_Eurocode_2.pdf
This document provides a concise summary of Eurocode 2 (EC2) for the design of reinforced concrete framed buildings. It aims to guide readers through the key aspects of EC2 and other relevant Eurocodes. The publication covers topics such as basis of design, materials, durability, structural analysis, bending and axial load, shear, punching shear, torsion, serviceability, detailing requirements, and design aids. It is intended to help designers transition to designing according to EC2 and the UK National Annex.
New Lindapter Product Catalog (Glaser)
Lindapter is a global company that has been innovating steel connection solutions for over 75 years. They pioneered clamping systems as an alternative to welding or drilling for connecting steel. Their products provide advantages like reduced installation time and no damage to steel coatings. Lindapter continues developing new products through research partnerships and testing to meet evolving construction needs. They offer custom engineered solutions in addition to their extensive standard product range.
16371 viva
The document summarizes a student's FYP II VIVA presentation on studying preferential weld corrosion in mild steel with acetic acid. The project aims to investigate how acetic acid and pH affect corrosion rates of weld segments. Literature review findings show that acetic acid increases corrosion by disrupting protective iron carbonate layer formation. Testing of weld specimens in brine with varied acetic acid concentrations and pH values found intrinsic corrosion highest in parent metal, while galvanic corrosion rates were highest for weld metal under some test conditions. Overall results provide insights into influences of acetic acid and pH on preferential weld corrosion.
Be2 awards Event Slides
This document summarizes the Be2Awards 2012 event and BeTalks presentations, which recognized the best uses of social media, BIM, sustainability, and other technologies in architecture, engineering and construction. It provides an agenda for the event, including 7 presentations on various related topics, as well as the winners in various categories like best use of Twitter, blogs, collaboration applications, and more. The event concluded with thanks to participants, voters, sponsors and the online audience.
Prevention Of Corrosion | Chicago Corrosion Group
The document summarizes the services provided by Chicago Corrosion Group, LLC. The company offers corrosion prevention and coating consulting services to help clients identify optimal and cost-effective corrosion prevention solutions. Services include condition surveys, root cause analysis, solution identification, specifications development, project management, quality control, and general contracting. The company aims to act solely in the clients' best interests and help them reduce costs with solutions that have low maintenance, high durability, and good performance.
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...
Aggregating decades of interconnectivity knowledge, Northwire, Inc. (NWI) along with its partner The LEMO Group, has released Part IV of their “Extreme Environments, Complex Requirements” white paper series, titled “Extreme Materials: Robust Performance from Cable to Connector.”
Gb2011 murray cook_egga
Galvanized steel provides long-term durability for construction works with relatively low environmental impact. The EU Construction Products Regulation emphasizes sustainable use of resources, including durability of materials. A case study of the Stainsby Hall Bridge in the UK found the galvanized steel beams maintained a coating thickness above the minimum standard after 24 years with an expected maintenance-free life of over 75 years. Galvanizing offers sustainability benefits through reduced maintenance needs and associated impacts.
Corrosion Consulting
Corrosion consulting aims to positively impact society by reducing corrosion effects, which can impact product quality, equipment life, safety, and the environment. The purpose is to offer expert corrosion consulting services to categorize corrosion issues, risks, and solutions by inspecting sites, determining failure causes, and providing materials selection guidance, training, and testimony.
A REVIEW OF STUDY ON CORROSION BEHAVIOUR OF ZINC COATED MILD STEEL
The document reviews studies on the corrosion behavior of zinc-coated mild steel. Zinc coating is commonly used to protect mild steel from corrosion by acting as a sacrificial anode. Several techniques for applying zinc coatings are discussed, including electroplating, cold spraying, and using zinc alloys. Research has found that zinc coatings improve corrosion resistance of mild steel in various environments like salt water. Thicker zinc coatings and post-treatment processes like heat treatment can further enhance corrosion protection. Zinc-coated mild steel performs better than uncoated mild steel in corrosive environments.
New Loctite® 4090™ Structural Instant Adhesive Hybrid — Combines Speed and St...
Loctite® 4090™ is a new patented hybrid adhesive from Henkel Corporation. Loctite® 4090™ combines the bond strength of a structural epoxy with the speed of an instant adhesive. Join this webinar to learn more about the many unique benefits of Loctite® 4090™ and how this innovative hybrid adhesive can solve your design and assembly challenges.
cv
Greg Turner is a welder from Lochgelly, Fife, Scotland. He has over 10 years of experience as a welder, including 5 years at Burntisland Fabrications and over 3 years at Subsea 7. He has extensive experience and qualifications in TIG, MIG, flux core, and manual MMA welding of materials like carbon steel, stainless steel, duplex steel, and inconel. His reference is James Coyle, Welding Superintendent at Subsea 7.
Home
Dan's Certified Welding specializes in gas tungsten arc welding (GTAW or TIG welding), a precise welding process using a tungsten electrode and argon gas. They also offer micro TIG welding, which uses a microscope for even finer work, and orbital tube welding of aircraft hydraulic lines. Dan's Certified Welding strives to provide excellent customer service and consultation in addition to high quality welds certified to various industry standards.
Current Resume
This document is a resume for James Olszewski, a metallurgist with extensive experience in various metallurgy roles including research, production, and management. He has worked for companies such as Alcoa and Heraeus in positions involving aluminum casting, extrusion, heat treating, alloy development, and startup of new facilities. Notable accomplishments include serving as chief metallurgist for the startup of a $1.5 billion aluminum smelter in Iceland and developing new memory alloys for computer hard drives while working in Singapore. He holds various certifications and has received awards for technical excellence.
Similar to RiBA CPD (20)
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...
A REVIEW OF STUDY ON CORROSION BEHAVIOUR OF ZINC COATED MILD STEEL
A REVIEW OF STUDY ON CORROSION BEHAVIOUR OF ZINC COATED MILD STEEL
New Loctite® 4090™ Structural Instant Adhesive Hybrid — Combines Speed and St...
New Loctite® 4090™ Structural Instant Adhesive Hybrid — Combines Speed and St...
Recently uploaded
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecently uploaded (20)
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
RiBA CPD
- 1. RIBA CPDs
- 2. Galvanizers Association were founder members of the RIBA CPD Providers Network and work closely with RIBA for new generations within the industry.
- 3. “(The CPD was) very informative and to the point(s)! Covered all areas well and answered most questions I had before I had a chance to ask!” Patrick Clarke Lilly Lewarne Practice
- 4. Galvanizers Association offers two CPDs 1. Corrosion Protection of Steel by HDG 2. Sustainable Construction
- 5. Corrosion Protection of Steel by Hot Dip Galvanizing helps develop a complete understanding of the hot dip galvanizing process. Book this Building CPD Book an Online CPD * Introduction to hot dip galvanizing * The galvanizing process * Coating characteristics * Performance * Designing for the process * Case studies
- 6. Book this Building CPDBook an Online version of this CPD
- 7. Galvanizing and Sustainable Construction CPD * Introduction to hot dip galvanizing * The galvanizing process * Coating characteristics and performance * What is sustainability? * Sustainable aspects of galvanizing: carbon footprint, recycling and durability * The benefits of zinc and steel * Case studies: Life Cycle Analysis Book an Online CPD Book this Sustainable Construction CPD
- 8. Book an Online CPD Book this Sustainable Construction CPD “Very knowledgeable presenter. John Murawski: MRA Architecture The presentation was just the right length to keep our interest.”
- 9. Book a CPD now Book a RIBA CPD Book Now
- 10. Follow Us