Resume senior paint chemist 2016
•
1 like•721 views
Mohamed AbdElwahhab is seeking a senior chemist position where he can utilize his extensive experience in surface coatings chemistry. He has a Bachelor's degree in chemistry from Menofyia University in Egypt with very good grades. He has over 6 years of work experience formulating coatings, inks, and construction materials as a QC chemist, R&D chemist and technical support specialist. He has skills in areas like color matching, pigment dispersion, analytical chemistry, and troubleshooting. He is knowledgeable about chemistry, standards like ISO and techniques like spectroscopy. He aims to further develop his skills and help companies with innovations, products, and fulfilling customer needs.
Report
Share
Report
Share
Download to read offline
Recommended
L6 safety and security of radiation sources
The document discusses safety and security protocols for radiation sources. It begins by noting the importance of safety and security to prevent accidents and unauthorized removal. It then summarizes common causes of radiation accidents and discusses what makes sources become "orphaned." The document outlines general safety and security protocols like controlling source transfers and establishing storage facilities. It describes steps to ensure safety and security during the life cycle of a source from manufacture to disposal. Key aspects include accounting procedures, source movement records, and radiation source audits. The conclusion restates that safety and security aims to keep radiation exposures low and prevent accidental exposures throughout a source's life.
Gc & gc vs hplc
This document compares gas chromatography (GC) and high performance liquid chromatography (HPLC). GC uses a gas mobile phase and separates compounds based on volatility, while HPLC uses a liquid mobile phase under high pressure and separates compounds based on interactions with the stationary phase. Some key differences discussed are that GC uses simpler, less expensive equipment than HPLC but can only analyze more volatile compounds, whereas HPLC can analyze a wider range of compounds including thermolabile ones. Both techniques have different instrumentation requirements and a variety of detectors can be used for analysis.
GM Counter and application in soil studies
The Geiger-Muller (GM) counter is an instrument that detects ionizing radiation such as alpha, beta, and gamma particles using the ionization effect in a GM tube. It works by producing an avalanche effect when ionizing particles pass through the tube, filled with a noble gas at low pressure, creating a pulse that is counted. While GM counters have limitations like low efficiency and inability to differentiate radiation types, they are widely used in applications like soil studies due to their simple sample preparation and ability to directly measure radiation from samples. In soil studies, GM counters are used to evaluate dynamics of radioactive tracers like phosphorus-32 and phosphorus-33 in soil-plant systems.
Organ at risk during pelvic irradiation
This document discusses radiation effects on various organs at risk during pelvic radiotherapy, including the bladder, rectum, urethra, ureter, small bowel, and anus. It outlines the acute and late effects of radiation on these organs, recommended dose limits, and treatments for complications. For each organ, it describes the histological changes, symptoms, grading scales for toxicities, and management approaches for issues like bleeding, strictures, and fistulas. It provides detailed information on radiation-induced injuries and their clinical management.
Dose rate effect in brachytherapy
1. The document discusses the dose-rate effect, which is the change in biological response to radiation when the dose is delivered at different rates. A lower dose rate allows more time for repair of sublethal DNA damage between radiation events.
2. Survival curves become progressively shallower at lower dose rates as the shoulder disappears due to repair. An inverse dose-rate effect can also occur at very low dose rates.
3. Clinical data on brachytherapy implants show better tumor control at higher dose rates (>0.5 Gy/h) compared to lower dose rates, especially for doses <65 Gy. Larger tumors are associated with higher dose rates due to implant size.
Flash radiation therapy
A novel technique of radiation delivery with ultrahigh dose rate radiation therapy delivered in milisecond of time. Although, still in investigational phase
BASIC CONCEPT OF RADIATION SHIELDING AND ITS CALCULATION TECHNIQUES
Training Course on Radiation Protection for Radiation Workers
and RCOs of BAEC, Medical Facilities & Industries
24 - 28 October 2021
Training Institute
Atomic Energy Research Establishment, Savar, Dhaka
Tbi ppt1
The document discusses total body irradiation (TBI), which involves delivering radiation to the entire body to condition patients for stem cell transplantation. It provides an overview of the history, concept, indications, doses, prerequisites, and treatment planning for TBI. Complications of TBI are also reviewed, including both immediate toxicities like nausea and vomiting as well as late effects such as salivary gland dysfunction and pneumonitis.
Recommended
L6 safety and security of radiation sources
The document discusses safety and security protocols for radiation sources. It begins by noting the importance of safety and security to prevent accidents and unauthorized removal. It then summarizes common causes of radiation accidents and discusses what makes sources become "orphaned." The document outlines general safety and security protocols like controlling source transfers and establishing storage facilities. It describes steps to ensure safety and security during the life cycle of a source from manufacture to disposal. Key aspects include accounting procedures, source movement records, and radiation source audits. The conclusion restates that safety and security aims to keep radiation exposures low and prevent accidental exposures throughout a source's life.
Gc & gc vs hplc
This document compares gas chromatography (GC) and high performance liquid chromatography (HPLC). GC uses a gas mobile phase and separates compounds based on volatility, while HPLC uses a liquid mobile phase under high pressure and separates compounds based on interactions with the stationary phase. Some key differences discussed are that GC uses simpler, less expensive equipment than HPLC but can only analyze more volatile compounds, whereas HPLC can analyze a wider range of compounds including thermolabile ones. Both techniques have different instrumentation requirements and a variety of detectors can be used for analysis.
GM Counter and application in soil studies
The Geiger-Muller (GM) counter is an instrument that detects ionizing radiation such as alpha, beta, and gamma particles using the ionization effect in a GM tube. It works by producing an avalanche effect when ionizing particles pass through the tube, filled with a noble gas at low pressure, creating a pulse that is counted. While GM counters have limitations like low efficiency and inability to differentiate radiation types, they are widely used in applications like soil studies due to their simple sample preparation and ability to directly measure radiation from samples. In soil studies, GM counters are used to evaluate dynamics of radioactive tracers like phosphorus-32 and phosphorus-33 in soil-plant systems.
Organ at risk during pelvic irradiation
This document discusses radiation effects on various organs at risk during pelvic radiotherapy, including the bladder, rectum, urethra, ureter, small bowel, and anus. It outlines the acute and late effects of radiation on these organs, recommended dose limits, and treatments for complications. For each organ, it describes the histological changes, symptoms, grading scales for toxicities, and management approaches for issues like bleeding, strictures, and fistulas. It provides detailed information on radiation-induced injuries and their clinical management.
Dose rate effect in brachytherapy
1. The document discusses the dose-rate effect, which is the change in biological response to radiation when the dose is delivered at different rates. A lower dose rate allows more time for repair of sublethal DNA damage between radiation events.
2. Survival curves become progressively shallower at lower dose rates as the shoulder disappears due to repair. An inverse dose-rate effect can also occur at very low dose rates.
3. Clinical data on brachytherapy implants show better tumor control at higher dose rates (>0.5 Gy/h) compared to lower dose rates, especially for doses <65 Gy. Larger tumors are associated with higher dose rates due to implant size.
Flash radiation therapy
A novel technique of radiation delivery with ultrahigh dose rate radiation therapy delivered in milisecond of time. Although, still in investigational phase
BASIC CONCEPT OF RADIATION SHIELDING AND ITS CALCULATION TECHNIQUES
Training Course on Radiation Protection for Radiation Workers
and RCOs of BAEC, Medical Facilities & Industries
24 - 28 October 2021
Training Institute
Atomic Energy Research Establishment, Savar, Dhaka
Tbi ppt1
The document discusses total body irradiation (TBI), which involves delivering radiation to the entire body to condition patients for stem cell transplantation. It provides an overview of the history, concept, indications, doses, prerequisites, and treatment planning for TBI. Complications of TBI are also reviewed, including both immediate toxicities like nausea and vomiting as well as late effects such as salivary gland dysfunction and pneumonitis.
Radiation safety in diagnostic nuclear medicine
1. Radiation is a form of energy emitted by atoms in the form of electromagnetic waves or particles. Ionizing radiation can eject electrons from atoms and produce ions, while non-ionizing radiation excites electrons.
2. People are exposed to ionizing radiation from natural and man-made sources. Naturally occurring sources include terrestrial radiation, cosmic radiation, and internal radiation. Medical procedures such as CT scans, nuclear medicine exams, and fluoroscopy account for over 90% of man-made radiation exposure.
3. Radiation protection aims to take advantage of the benefits of radiation use while preventing deterministic effects and limiting stochastic effects to acceptable levels. Occupational dose limits are higher than public limits, and some populations like
Doses and Risks in Diagnostic Radiology, Interventional Radiology and Cardiol...
This document reviews doses and risks from natural background radiation as well as medical sources of radiation including diagnostic radiology, interventional radiology/cardiology, and nuclear medicine. It provides details on dose levels from various natural sources and medical procedures. The highest medical doses come from interventional fluoroscopy which can exceed skin dose limits and increase risks. Nuclear medicine procedures generally have lower doses than interventional methods but higher than diagnostic radiology. Risks to both patients and medical staff are discussed.
OAR HEAD AND NECK
This document discusses various challenges in respecting organs at risk (OAR) during radiation therapy treatments. It provides dose constraints for different OARs like the spinal cord, brainstem, optic structures, parotid glands, larynx, and brachial plexus. It also discusses dose calculation methods and recovery of tissues over time. Strategies mentioned include using advanced intensity modulated radiation therapy (IMRT) techniques and practicing brachytherapy to better respect nearby OARs.
Presentation on ndt
This document provides an overview of non-destructive testing (NDT) methods. It discusses six common NDT methods - radiography testing, ultrasonic testing, magnetic particle testing, liquid penetrant testing, visual testing, and eddy current testing. For each method, it describes the basic principles, processes, advantages, and limitations. The document is intended to educate about the various NDT techniques and their applications in evaluating materials and structures without impairing their future usefulness.
Practical Aspect of Tc 99m radiopharmaceuticals
https://www.snmclub.com/presentation
Practical Aspect of Tc 99m radiopharmaceuticals
Al Rowaily Mohammed, MSc, CRP, PhD
icrm2018
LONG TERM TOXICITIES AND QUALITY OF LIFE AFTER RADIATION TO CENTRAL NERVOUS ...
This document discusses radiation-induced central nervous system toxicity. It defines acute toxicity as occurring within days to weeks of radiation exposure, and late toxicity as occurring more than 6 months after exposure. The main risk factors for late CNS toxicities are the volume of normal brain irradiated, total dose, fractionation schedule, concurrent medications, and host factors like age. The primary mechanisms of CNS injury include oxidative stress, changes in microvascular permeability, and damage to oligodendrocytes, astrocytes, microglia and neurons. Common late effects are radiation necrosis, neurocognitive impairment, endocrinopathies, cerebrovascular effects, and migraine-like headaches.
Fractionation and dose rate effect
Fractionation of radiation doses allows normal tissues to repair sublethal damage between fractions through processes like repair, repopulation, and reoxygenation. This reduces damage to normal tissues compared to a single high dose. Tumor cells are sensitized by redistribution and reoxygenation. Hyperfractionation uses smaller doses more frequently to allow higher total doses while respecting normal tissue tolerance. Accelerated fractionation reduces treatment time to limit tumor regrowth. Dose rate effects occur as repair of sublethal damage reduces cell killing at lower dose rates, though some cell lines are more sensitive in G2 phase at very low dose rates in an inverse effect.
hptlc
This document provides information on high-performance thin layer chromatography (HPTLC). It discusses the basic principles of TLC and how HPTLC enhances it with automation. The key steps of HPTLC are described, including sample preparation, application, development, detection, and documentation. Various instrumentation, plates, mobile phases, and detection methods used in HPTLC are also outlined. HPTLC is highlighted as a useful technique for pharmaceutical analysis, food testing, clinical applications, forensics, and industrial processes.
Radiography ndt
Radiography uses X-rays or gamma rays to penetrate materials, with denser areas absorbing more radiation and appearing darker on the recording film. The part is placed between the radiation source and film, and the film's darkness varies according to how much radiation reaches it through different thicknesses and densities within the part, revealing internal features and defects. For more information on radiography and other non-destructive testing methods, contact NDT India.
Tubular Non Destructive techniques (Remote field testing and Internal Rotary ...
Tubular Non Destructive techniques (Remote field testing and Internal Rotary Inspection System) in a short presentation
Radiation modifiers
Radiation is commonly used to treat two-thirds of cancer patients and works by damaging the DNA of cancer cells. While it targets cancer cells, radiation can also damage normal tissues. Radiation modifiers aim to increase the tumor's sensitivity to radiation without increasing injury to normal tissues. They work by either sensitizing tumors or protecting normal tissues. The goal is to improve the therapeutic ratio and allow higher, more effective radiation doses to be used. Examples of radiation modifiers discussed in the document include hyperbaric oxygen, carbogen gas with or without nicotinamide, and hyperthermia.
Hodgkins lymphoma
This document provides treatment recommendations for Hodgkin's lymphoma based on stage. For early stage disease, recommended treatment is chemotherapy (ABVD) followed by involved field radiation therapy (IFRT). For advanced stages III and IV, the recommended treatment is ABVD chemotherapy followed by IFRT to bulky or residual sites. Relapse is treated with chemotherapy followed by IFRT to previously untreated sites. The document also discusses definitions of radiation therapy fields and doses for different involved sites.
The use of deauville criteria in follow up assessment of response to therapy ...
use of deauville criteria in follow up assessment of response to therapy in extra-nodal non-hodgkin's lymphoma
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
I ‘am Certified Coating Inspector for SSPC Level 2 of PCI - Protective Coating Inspector American Standards Equivalent of NACE 2, CSWIP-BGAS 2 and FROSIO 3, and have Experience for all Insulation Works Likes: Cryogenic Insulation Cold Box Equipment, Tank for Polyurethane Foam Insulation of Double Walls, Tank Insulation External Wall and Thermal Insulation for Piping and Mechanical Equipment"
SRIKANTH PUTHAN VETTIL_ Resume
Srikanth Puthan Vettel has over 11 years of experience in manufacturing operations, technical marketing, supply chain management, logistics, and warehouse management. He has held leadership roles in supply chain and logistics for E.I. DuPont India and has experience in procurement, transportation, import/export compliance, and warehouse management. He also has experience in technical marketing, product development, quality systems, and production planning.
Ketan desai original
Ketan Desai has over 10 years of experience as a chemist in powder coating and paint industries. He has a background in projects focused on environmental sustainability and regulatory compliance. Currently he works as a Chemist in Research and Development at Speciality Powder Coating Ltd, where he performs research, experiments, and technical project assistance across diverse areas of chemistry. Previously he held roles such as General Manager and Production Manager at various paint companies in India. He has an MBA in Marketing and BSc degrees in Paint Technology, Chemistry.
chetan vakhariya CV.doc
Chetan Vakhariya is a quality control chemist currently working at Firmenich Aromatic Production (INDIA) Pvt. Ltd. in Dahej. He has over 15 years of experience in quality control and has worked for several companies including Gujarat Fluorochemicals Limited, Hemani Intermediates Pvt Ltd, Gujarat Organics Ltd, and Vardhman Acrylics Ltd. He holds a B.Sc. in Chemistry with First Class honors and is proficient in laboratory instruments and analytical techniques like GC, GCMS, HPLC, and Karl Fischer titration.
Resume (1)
This document is a resume for Pradeep Kumar Singh. It summarizes his professional experience working in chemical process engineering and management roles over 6.1 years, most recently as an Assistant Manager at Alpha Maier Pvt. Ltd. It also lists his educational background in chemical engineering and skills in areas like process management, team management, and IT.
Linkedin Resume
Josh Guilliams is a chemist currently working as a Regional Technical Marketing Manager for Lanxess Corporation, where he develops butyl polymers for tires, pharmaceuticals, adhesives, and food applications. He previously worked for Bridgestone America as a Compounding Engineer and Six Sigma Black Belt, developing tire compounds for OE and trade applications. He has a Bachelor's degree in Chemistry/Engineering from Baldwin-Wallace College and a partially completed Master's degree in Polymer Science from the University of Akron.
Chemist
Zeyad Alam is a lab technician with over 10 years of experience working in water treatment plants in Saudi Arabia, Kuwait, and India. He has a bachelor's degree in chemistry and is fluent in English, Hindi, Urdu, and Arabic. His responsibilities include performing chemical, physical, and bacteriological tests on water and wastewater samples; analyzing data; and ensuring compliance with regulations. He has good knowledge of water treatment processes like chlorination and expertise in water quality analysis techniques.
sk resume (1)
Stuart Kinquist is an analytical chemist and environmental scientist with over 25 years of experience analyzing samples for environmental toxins such as asbestos, heavy metals, and organic compounds. He has extensive experience using laboratory instruments and developing quality control procedures. Kinquist's professional experience includes working as an analytical chemist analyzing samples for environmental contaminants and as a microscopist supervising asbestos sampling projects. He holds a Bachelor's degree in Chemistry and professional certifications in asbestos inspection and supervision.
2010 Chemistry CV
Michael Dickens is seeking a career in scientific research based in a laboratory. He has a PhD in medicinal chemistry from the University of Nottingham where he synthesized over 150 novel compounds, established structure-activity relationships, and produced a lead compound 30 times more potent. He has strong laboratory skills in organic synthesis, characterization techniques like NMR and HPLC, and safety compliance. Previous experience includes teaching assistant roles and volunteer work in addition to his research accomplishments.
More Related Content
What's hot
Radiation safety in diagnostic nuclear medicine
1. Radiation is a form of energy emitted by atoms in the form of electromagnetic waves or particles. Ionizing radiation can eject electrons from atoms and produce ions, while non-ionizing radiation excites electrons.
2. People are exposed to ionizing radiation from natural and man-made sources. Naturally occurring sources include terrestrial radiation, cosmic radiation, and internal radiation. Medical procedures such as CT scans, nuclear medicine exams, and fluoroscopy account for over 90% of man-made radiation exposure.
3. Radiation protection aims to take advantage of the benefits of radiation use while preventing deterministic effects and limiting stochastic effects to acceptable levels. Occupational dose limits are higher than public limits, and some populations like
Doses and Risks in Diagnostic Radiology, Interventional Radiology and Cardiol...
This document reviews doses and risks from natural background radiation as well as medical sources of radiation including diagnostic radiology, interventional radiology/cardiology, and nuclear medicine. It provides details on dose levels from various natural sources and medical procedures. The highest medical doses come from interventional fluoroscopy which can exceed skin dose limits and increase risks. Nuclear medicine procedures generally have lower doses than interventional methods but higher than diagnostic radiology. Risks to both patients and medical staff are discussed.
OAR HEAD AND NECK
This document discusses various challenges in respecting organs at risk (OAR) during radiation therapy treatments. It provides dose constraints for different OARs like the spinal cord, brainstem, optic structures, parotid glands, larynx, and brachial plexus. It also discusses dose calculation methods and recovery of tissues over time. Strategies mentioned include using advanced intensity modulated radiation therapy (IMRT) techniques and practicing brachytherapy to better respect nearby OARs.
Presentation on ndt
This document provides an overview of non-destructive testing (NDT) methods. It discusses six common NDT methods - radiography testing, ultrasonic testing, magnetic particle testing, liquid penetrant testing, visual testing, and eddy current testing. For each method, it describes the basic principles, processes, advantages, and limitations. The document is intended to educate about the various NDT techniques and their applications in evaluating materials and structures without impairing their future usefulness.
Practical Aspect of Tc 99m radiopharmaceuticals
https://www.snmclub.com/presentation
Practical Aspect of Tc 99m radiopharmaceuticals
Al Rowaily Mohammed, MSc, CRP, PhD
icrm2018
LONG TERM TOXICITIES AND QUALITY OF LIFE AFTER RADIATION TO CENTRAL NERVOUS ...
This document discusses radiation-induced central nervous system toxicity. It defines acute toxicity as occurring within days to weeks of radiation exposure, and late toxicity as occurring more than 6 months after exposure. The main risk factors for late CNS toxicities are the volume of normal brain irradiated, total dose, fractionation schedule, concurrent medications, and host factors like age. The primary mechanisms of CNS injury include oxidative stress, changes in microvascular permeability, and damage to oligodendrocytes, astrocytes, microglia and neurons. Common late effects are radiation necrosis, neurocognitive impairment, endocrinopathies, cerebrovascular effects, and migraine-like headaches.
Fractionation and dose rate effect
Fractionation of radiation doses allows normal tissues to repair sublethal damage between fractions through processes like repair, repopulation, and reoxygenation. This reduces damage to normal tissues compared to a single high dose. Tumor cells are sensitized by redistribution and reoxygenation. Hyperfractionation uses smaller doses more frequently to allow higher total doses while respecting normal tissue tolerance. Accelerated fractionation reduces treatment time to limit tumor regrowth. Dose rate effects occur as repair of sublethal damage reduces cell killing at lower dose rates, though some cell lines are more sensitive in G2 phase at very low dose rates in an inverse effect.
hptlc
This document provides information on high-performance thin layer chromatography (HPTLC). It discusses the basic principles of TLC and how HPTLC enhances it with automation. The key steps of HPTLC are described, including sample preparation, application, development, detection, and documentation. Various instrumentation, plates, mobile phases, and detection methods used in HPTLC are also outlined. HPTLC is highlighted as a useful technique for pharmaceutical analysis, food testing, clinical applications, forensics, and industrial processes.
Radiography ndt
Radiography uses X-rays or gamma rays to penetrate materials, with denser areas absorbing more radiation and appearing darker on the recording film. The part is placed between the radiation source and film, and the film's darkness varies according to how much radiation reaches it through different thicknesses and densities within the part, revealing internal features and defects. For more information on radiography and other non-destructive testing methods, contact NDT India.
Tubular Non Destructive techniques (Remote field testing and Internal Rotary ...
Tubular Non Destructive techniques (Remote field testing and Internal Rotary Inspection System) in a short presentation
Radiation modifiers
Radiation is commonly used to treat two-thirds of cancer patients and works by damaging the DNA of cancer cells. While it targets cancer cells, radiation can also damage normal tissues. Radiation modifiers aim to increase the tumor's sensitivity to radiation without increasing injury to normal tissues. They work by either sensitizing tumors or protecting normal tissues. The goal is to improve the therapeutic ratio and allow higher, more effective radiation doses to be used. Examples of radiation modifiers discussed in the document include hyperbaric oxygen, carbogen gas with or without nicotinamide, and hyperthermia.
Hodgkins lymphoma
This document provides treatment recommendations for Hodgkin's lymphoma based on stage. For early stage disease, recommended treatment is chemotherapy (ABVD) followed by involved field radiation therapy (IFRT). For advanced stages III and IV, the recommended treatment is ABVD chemotherapy followed by IFRT to bulky or residual sites. Relapse is treated with chemotherapy followed by IFRT to previously untreated sites. The document also discusses definitions of radiation therapy fields and doses for different involved sites.
The use of deauville criteria in follow up assessment of response to therapy ...
use of deauville criteria in follow up assessment of response to therapy in extra-nodal non-hodgkin's lymphoma
What's hot (13)
Doses and Risks in Diagnostic Radiology, Interventional Radiology and Cardiol...
Doses and Risks in Diagnostic Radiology, Interventional Radiology and Cardiol...
LONG TERM TOXICITIES AND QUALITY OF LIFE AFTER RADIATION TO CENTRAL NERVOUS ...
LONG TERM TOXICITIES AND QUALITY OF LIFE AFTER RADIATION TO CENTRAL NERVOUS ...
Tubular Non Destructive techniques (Remote field testing and Internal Rotary ...
Tubular Non Destructive techniques (Remote field testing and Internal Rotary ...
The use of deauville criteria in follow up assessment of response to therapy ...
The use of deauville criteria in follow up assessment of response to therapy ...
Viewers also liked
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
I ‘am Certified Coating Inspector for SSPC Level 2 of PCI - Protective Coating Inspector American Standards Equivalent of NACE 2, CSWIP-BGAS 2 and FROSIO 3, and have Experience for all Insulation Works Likes: Cryogenic Insulation Cold Box Equipment, Tank for Polyurethane Foam Insulation of Double Walls, Tank Insulation External Wall and Thermal Insulation for Piping and Mechanical Equipment"
SRIKANTH PUTHAN VETTIL_ Resume
Srikanth Puthan Vettel has over 11 years of experience in manufacturing operations, technical marketing, supply chain management, logistics, and warehouse management. He has held leadership roles in supply chain and logistics for E.I. DuPont India and has experience in procurement, transportation, import/export compliance, and warehouse management. He also has experience in technical marketing, product development, quality systems, and production planning.
Ketan desai original
Ketan Desai has over 10 years of experience as a chemist in powder coating and paint industries. He has a background in projects focused on environmental sustainability and regulatory compliance. Currently he works as a Chemist in Research and Development at Speciality Powder Coating Ltd, where he performs research, experiments, and technical project assistance across diverse areas of chemistry. Previously he held roles such as General Manager and Production Manager at various paint companies in India. He has an MBA in Marketing and BSc degrees in Paint Technology, Chemistry.
chetan vakhariya CV.doc
Chetan Vakhariya is a quality control chemist currently working at Firmenich Aromatic Production (INDIA) Pvt. Ltd. in Dahej. He has over 15 years of experience in quality control and has worked for several companies including Gujarat Fluorochemicals Limited, Hemani Intermediates Pvt Ltd, Gujarat Organics Ltd, and Vardhman Acrylics Ltd. He holds a B.Sc. in Chemistry with First Class honors and is proficient in laboratory instruments and analytical techniques like GC, GCMS, HPLC, and Karl Fischer titration.
Resume (1)
This document is a resume for Pradeep Kumar Singh. It summarizes his professional experience working in chemical process engineering and management roles over 6.1 years, most recently as an Assistant Manager at Alpha Maier Pvt. Ltd. It also lists his educational background in chemical engineering and skills in areas like process management, team management, and IT.
Linkedin Resume
Josh Guilliams is a chemist currently working as a Regional Technical Marketing Manager for Lanxess Corporation, where he develops butyl polymers for tires, pharmaceuticals, adhesives, and food applications. He previously worked for Bridgestone America as a Compounding Engineer and Six Sigma Black Belt, developing tire compounds for OE and trade applications. He has a Bachelor's degree in Chemistry/Engineering from Baldwin-Wallace College and a partially completed Master's degree in Polymer Science from the University of Akron.
Chemist
Zeyad Alam is a lab technician with over 10 years of experience working in water treatment plants in Saudi Arabia, Kuwait, and India. He has a bachelor's degree in chemistry and is fluent in English, Hindi, Urdu, and Arabic. His responsibilities include performing chemical, physical, and bacteriological tests on water and wastewater samples; analyzing data; and ensuring compliance with regulations. He has good knowledge of water treatment processes like chlorination and expertise in water quality analysis techniques.
sk resume (1)
Stuart Kinquist is an analytical chemist and environmental scientist with over 25 years of experience analyzing samples for environmental toxins such as asbestos, heavy metals, and organic compounds. He has extensive experience using laboratory instruments and developing quality control procedures. Kinquist's professional experience includes working as an analytical chemist analyzing samples for environmental contaminants and as a microscopist supervising asbestos sampling projects. He holds a Bachelor's degree in Chemistry and professional certifications in asbestos inspection and supervision.
2010 Chemistry CV
Michael Dickens is seeking a career in scientific research based in a laboratory. He has a PhD in medicinal chemistry from the University of Nottingham where he synthesized over 150 novel compounds, established structure-activity relationships, and produced a lead compound 30 times more potent. He has strong laboratory skills in organic synthesis, characterization techniques like NMR and HPLC, and safety compliance. Previous experience includes teaching assistant roles and volunteer work in addition to his research accomplishments.
Resume of Mr.M.S.Dawood
Mr. Dawood Shaik has over 19 years of experience in research and development of coating products, quality assurance, and technical support. He currently serves as the Senior Manager of the quality assurance, technical support, and development department at Chugoku Marine Paints, where he leads a team of 10 people and supports teams in Singapore, Malaysia, and India. He has extensive experience developing various coating products, conducting over 500 projects, and providing technical services internationally.
Viewers also liked (10)
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
Similar to Resume senior paint chemist 2016
Resume-New
Vikil Mahadev More is seeking senior level assignments in quality management, lab operations, and process improvement. He has over 5 years of experience in quality assurance and lab operations. Currently he works as a senior officer in the QC lab at PPG Asian Paints Ltd in Pune, where he is responsible for all QA activities and supervises a team of three people. Previously he worked at Pidilite Industries Ltd as a QC lab supervisor.
ROHAN RAMESH CHAVAN 2016
Rohan Ramesh Chavan is seeking a position in production, quality assurance, quality control, or plant operations. He has over 5 years of experience in these areas for companies in India and the UAE. His skills include production planning, materials management, quality management, and people management. He has experience developing new products, establishing testing facilities, and ensuring compliance with ISO standards.
p.deepan1(1)
P. Deepan Pradip has nearly 17 years of experience in product management, production, and research and development in the chemical sector. He is currently the Works Manager at IWL India Ltd., where he oversees three manufacturing units and ensures quality production at low cost. He has expertise in various process industries including petrochemicals, polymers, pharmaceuticals, and construction chemicals. He is skilled in new product development, quality management, and continuous process improvement.
Resume_17.02.12[1 Flxi rtf
A. Ashok Kumar has over 21 years of experience in quality control and assurance. He is currently a Level Manager of QA and QC at ITC Ltd. in Chennai, where he leads a team and oversees all QA activities. He has extensive experience with process optimization, implementing quality management systems, and troubleshooting analytical equipment. He holds an M.Sc. in Physical and Organic Chemistry and is proficient in various laboratory instruments and packaging quality tests.
Prad resume
P. Deepan Pradip has nearly 16 years of experience in product management, production, and research and development in the chemical sector. He is currently the Works Manager - Chemical at IWL India Ltd., where he oversees quality control and ensures standards are met. He has experience in various industries including pharmaceuticals, petrochemicals, polymers, and construction chemicals.
p.deepan1
The document provides a summary of P. Deepan Pradip's professional experience and qualifications. It summarizes that he has 15 years of experience in product management, production, and research and development in the chemical sector. He is currently the Works Manager - Chemical at IWL India Ltd., Chennai, where he oversees quality control and cost optimization. He has expertise in various process industries including petrochemicals, polymers, and construction chemicals.
Brc Resume
Bhimashankar Chavare is seeking a challenging position that utilizes his 7.3 years of experience in BOPP and polyester extrusion coating. He currently works as an Assistant Manager at Cosmo Films Ltd in Aurangabad, where he is responsible for production activities and meeting targets. His skills include expertise in extrusion coating processes, troubleshooting plastics extrusion, and implementing quality systems like 5S and TPM. He is proficient in production planning and maintenance and aims to grow professionally.
MKP
Manoj Pundir is seeking a senior position in quality control management, customer support, research and development, and environmental management. He has over 20 years of experience in these areas and is currently working as the Assistant General Manager of R&D and QC at Bindal Paper Mills Ltd.
Miss Nuchanat Sawatdeenarinat ' s CV_ 30 Jan
This curriculum vitae summarizes the qualifications of Nuchanat Sawatdeenarinat. It includes personal details, education history, targeted positions, skills summary, and employment history. Nuchanat has over 15 years of experience in technical service and business development roles within the adhesives industry in Thailand, with a focus on developing new products, customers, and markets. She is currently the Manager of ASEAN Technical Advisor at BASF Thailand, where she works to expand business across Southeast Asia.
p.deepan1(1)
The document is a resume for P. Deepan Pradip seeking a managerial role in product management or research and development in the petrochemical and polymer chemical industry. Some key points:
- He has 17 years of experience in product management, production, and R&D in the chemical sector and is currently working as Works Manager - Chemical at IWL India Ltd. in Chennai.
- His experience includes new product development, quality management, production planning, and ensuring quality standards are met while keeping production costs low.
- He has expertise in process simulation, equipment specification, root cause analysis, and leading investigations.
Resume of Arthur Galit latest1
Arthur Galit is seeking a position in plant operations or research and development that utilizes his technical background in unit operations and process equipment. He has over 10 years of experience in pharmaceutical manufacturing, holding positions such as production engineering mechanical technician, process operator, and unit team leader. Galit has extensive experience operating and maintaining various packaging, processing, tableting, and coating machines. He has a bachelor's degree in mechanical engineering and has participated in many seminars on topics like problem solving, tableting skills, and cGMP.
M Sc Islam Mohamed Hegazy
Islam Mohamed Hegazy is an Egyptian chemist seeking a position in quality control, production, or process management. He has nearly 9 years of experience in quality assurance and laboratory management. Currently, he is the Vice Manager of Quality and Laboratory Technical Manager at Al-AMAL Company for Plastic Pipes & Fittings, where he oversees quality inspectors and laboratory technicians. Hegazy holds an M.Sc. in polymer chemistry and a B.Sc. in chemistry, and has experience in ISO auditing and product research and development.
Capacity Profile Us Masterbatch
US MASTERBATCH JSC- The fastest- growing name of CaCO3 Filler Masterbatch, Color Masterbatch, Additives Masterbatch Manufacturers & Exporters from Vietnam- We are small enough to care & large enough to exceed your needs.
Saminathan-Professional_content
This document contains a resume for M. Saminathan, who has over 16 years of experience in quality, research and development roles in the chemicals and plastics industries. He holds a Master's degree in Chemistry and has worked in various positions related to quality assurance, product development, and laboratory management. His skills include experience with analytical instruments, ISO standards, process improvement tools, and product development from concept to commercialization.
CV
Quality Engineer with 11 years quality experience. Experienced auditor looking to further develop skills in quality management tools and techniques with a goal to progress into quality management in a 3 to 5 year time frame.
Pilot Scale Of Paint Manufacturing
The document provides background on the presenter's qualifications and experience in paint and coating product development. It then discusses the key components of paint, including pigments, resins, solvents, and additives. The document outlines the equipment, materials, staffing, and testing needed for a paint research and development laboratory and production facility. It also discusses common process challenges in paint manufacturing and lists example standard paint products.
RESUME1
Rahul Kumar Pathak is a General Manager of Operations with over 10 years of experience in plastic production planning and management. He is currently managing operations at Pyramid Technoplast Pvt. Ltd., including setting up a new IBC factory. Pathak has expertise in production management, process enhancement, quality assurance, and resource management. He holds a post-graduate diploma in plastic processing and testing and pursued an MBA.
Lam Chi Chung CV new HK
Brian Lam is seeking a position as a QA officer. He has over 2 years of experience working as a QA officer for Bristol Laboratories in the UK where his responsibilities included sampling and testing materials, approving artwork, batch record reviews, audits, and validation activities. He also did a pharmacy clerkship with Watsons Ltd in Hong Kong. Brian has an MSc in Pharmaceutical Technology from the University of Bradford and a BSc in Pharmaceutical Science from the University of Manchester. He has strong technical skills and interpersonal skills.
Manikanta -Resume
Gundubogula Manikanta has 2 years of experience as an Associate Manager in polyurethane production at Sheela Foam Limited in Hyderabad. He led projects to recover methylene chloride from chemical mixtures using distillation, and develop a digital manometer for easier foam porosity checks. He has a B.Tech in Chemical Engineering and skills in process engineering, polymer production, quality control, and product development. His career objective is to work in sustainable polymer product development applying his experience and skills.
pradeep_shukla
Pradeep Kumar Shukla is seeking a position in textile sales and business development. He has over 8 years of experience in textile processing, digital printing, and technical account management. His experience includes roles at Huntsman International India Pvt. Ltd., Bodal Chemicals Limited, and Welspun India Limited. He has strong skills in sales, textile fibers and processes, digital printing, team leadership, and computer programs like SAP and Adobe Photoshop. Pradeep holds a B.Tech. in textiles from the Indian Institute of Carpet Technology and is pursuing an international business postgraduate diploma from AIMA.
Similar to Resume senior paint chemist 2016 (20)
Resume senior paint chemist 2016
- 1. 1 MohamedAbdEl wahhab CONTACT 3, abd el azeem fahmy st , AL amera village Menouf Egypt science_eg@yahoo.com +20 109 3965 262 EDUCATION Bachelorofscience May 2009 Menofyia university BSc in chemistry with grade :very good OBJECTIVE Seeking a position as a senior chemist where extensive experience in the field of surface coatings chemistry ( coatings, inks, construction materials ) will be further developed and utilized. SKILLS -TQM. - Color Matching. -Color Analysis (Spectrophotometer). - Pigments dispersion & Grinding . -Expert in water based inks & paints. - Lab analytical Chemist. -Trouble shooting & Technical support. - Knowledgeable in chemistry of coatings . -Leather finishing products formulator - Printing & Flexible packaging -Aware for ISO9001,14000,18000,22000 WORK EXPERIENCE 2- GMC for paints& inks (EXApaints). Products & Business development Manager . manage the entire interior paint and printing inks products by building in-depth knowledge and understanding of the customers and influencers' needs and wants, the market situation and dynamics. Furthermore to assist the General Marketing Manager in defining clear strategies and plans for how to approach this market and facilitating innovations and R&D tasks to fulfill changing customer needs. To secure the profitable growth targets in accordance with segment, category and country's strategies/budget. 1-Egyptian Company For Advanced Chemical Technology (Wafa chemicals) QCchemist/R&Dchemist/Technicalsupport May2016 ـــــNOW July 2010 —April2016 (6 years ) Design and formulate smart recipes for various types of coatings( flexo inks , pigment dispersions ,universal colorants , printing varnishes , water based Construction paints ,Leather finishing coatings . Analyze and Report & summarize results of experimental trials. Inspection of raw materials and final products (organic and inorganic pigments , dyes , solvents , polymers).using particle size analyzer ,x-rite(color analysis), hydrometer , rehololgy measurements , Ph meter , lap grind mills,gloss meter , grind meter ,oil absorption ,rub resistance Technical support , aware of all printing processes and factors that affect the flexo printing quality (Anilox, Operations and Environment) Instructor of training courses on the inks and printing problems in the carton factories.
- 2. 2 Courses Course Duration Organization Workplace Safety and Health (WSH) June2011- July 2011 ECAT (AVANTI Group ) ISO 9001 Lead Auditor Agu2011-Agu2011 ECAT ( Brilliance Business School) Total quality Management (TQM) Jan2012-feb2012 ECAT (SGS) Lean Six Sigma Green Belt Feb2012- Feb 2012 ECAT (SGS) ISO 22000 HACCP auditor Ague 2013-Oct 2013 ECAT ( Brilliance Business School) Quality control for paints and coatings Nov2013-Nov 2013 ECAT ( NRC ) Honors & Awards Certificate of achievement Feb2014 Certificate of achievement for my bright ideas for the development of the company's performance and reduce costs and increase sales INTERESTS Music, Reading, Painting, singing , social activities A permanent participant in scientific communication competitions organized by international bodies. eg FameLab organized by the British council . you can contact with me through the followings : e-mail : science_eg@yahoo.com Skype : kindmedo765 mobile : +2010939652