The document provides a personal and professional summary of an individual with over 4 years of experience in oil and gas risk-based inspection projects and failure analysis. They are currently pursuing a PhD in materials science, focusing on magnetic and mechanical properties of iron-based alloys. Details are given on education history, skills, publications, and professional references.

1. PERSONAL SUMMARY
A talented and energetic researcher with a strong willingness to build a career within the
research and development industry. Offering four years experience in various Oil and
Gas projects within Risk based Inspection studies (RBI): failure analysis and corrosion
studies, implementing RBI methodology, providing inspection plans, fitness-for-service
assessment (FFS). Highly efficient and systematic with a good eye for details.
CAREER HISTORY
 University of New South Wales (UNSW)-Sydney, Australia
PhD Researcher- February 2013-Present
Working on magnetic and mechanical properties of Fe-based
amorphous/nanocrystalline alloys
Duties:
 Optimizing the soft magnetic behavior through composition design
and microstructure control
 Writing reports, articles and giving presentation to supervisor and
BAOSTEEL’s panel (Founder Institute)
 Analyzing the results obtained and investigating the accuracy of
them
 Technical Inspection and Corrosion Control Company (TECHINCO)-Tehran, Iran
RBI and Corrosion engineer- September 2008-2013
Duties:
 Corrosion studies and failure analysis of pressurized equipment
including pipelines and vessels using RBI methodology
 Calculating the probability of failure (PoF) and consequence of
failure (CoF)
 Providing inspection plans for pipelines and pressure vessels
according to API 580 and 581 guidelines
 Implementing overhaul programs with regards to RBI results
 Preparing inspection and repair work order procedures
 Fitness-for-Service assessment for damaged equipment using API
579 guidelines
KEY SKILLS
Research skills
Hamid Reza Lashgari
Homebush West, Sydney
Email: h.lashgari@student.unsw.edu.au
Mobile: +61404231341

2. Handle multi-task projects
Data analysis
Committed, responsible and trustworthy
Liaison with clients and relevant inspectors concerning quality of workmanship and
meeting stringent standards
SOFTWARE SKILLS
Microsoft word, Excel, PowerPoint, Outlook
LyX
Origin Pro
High Score Plus (XRD analysis)
Photoshop
PERSONAL INFORMATION
Date of Birth: 25-August-1984
Nationality: Persian
Languages: Persian (Native Proficiency) and English (Professional working proficiency)
Visa status: Permanent Resident of Australia (Subclass 189)
EDUCATION
 University of New South Wales (UNSW)-Sydney, Australia
2013-Present
PhD-Materials Science
School of Materials Science and Engineering
 University of Tehran-Tehran, Iran
2006-2008
Master of Science-Material Selection and Characterization
School of Materials Science and Engineering
 IKIU University-Qazvin, Iran
2002-2006
Bachelor’s degree-Industrial Metallurgy and Materials Engineering
Faculty of Engineering
RESEARCH ACCOMPLISHMENT
PhD Thesis Project: The Development of High Bs and Low Hc Fe-based
amorphous/Nanocrystalline alloys produced by melt-spinning method (February 2013-
Present)
 Conducting comprehensive literature review
 Thermal stability studies using DSC and DMA
 Studying magnetic properties using VSM and B-H loop Tracer

3.  Microstructural studies using TEM, SEM, XRD, TKD and AFM
 Sample preparation for TEM using FIB and PIPs
 Investigating mechanical behavior using Nanoindentation
(Hysitron and UMIS)
MSE Thesis Project: The effect of Sr, Ti-B and Zr on the Microstructure, Tensile and
Wear properties of A356-B4C composites produced by stir-casting method (2006-2008)
 Conducting comprehensive literature review
 Stir-casting and sample preparation
 Microstructural studies using OP, SEM and XRD
 Mechanical properties measurement using tensile and wear testing
BSC Thesis Project: The effect of Sr, Ti-B and Zr on the Microstructure and Tensile
properties of A356-SiC/Al2O3 composites
ISI PUBLICATIONS
 Thermal stability, dynamic mechanical analysis and nanoindentation
behavior of FeSiB(Cu) amorphous alloys, Materials Science and Engineering A,
Volume 626, 25 February 2015, Pages 480-499
 Composition dependence of the microstructure and soft magnetic
properties of Fe-based amorphous/nanocrystalline alloys: A review study, Journal
of Non-Crystalline Solids, Volume 391, 1 May 2014, Pages 61-82
 Recent progress in high Bs and low Hc Fe-based nanocrystalline alloys,
Nanotechnology Reviews, Volume 3, Issue 2 (Apr 2014)
 Failure Analysis of α-MDEA Air-Cooled Heat Exchanger of CO2
Removal Unit Based on the Semiquantitative Risk-Based Inspection Method,
Journal of Pressure Vessel and Technology (ASME),136, 025501 (2014)
 Microstructure and tribological characteristics of aged Co–28Cr–5Mo–
0.3C alloy, Materials & Design, Volume 37, May 2012, Pages 292-303
 Isothermal aging effect on the microstructure and dry sliding wear
behavior of Co–28Cr–5Mo–0.3C alloy, Journal of Materials Science, November
2011, Volume 46, Issue 22, pp 7262-7274
 The Effect of Sr and Grain Refining Elements on the Microstructure and
Tensile Properties of A356-10%B4C Metal Matrix Composite, Mechanics of
Advanced Materials and Structure, Volume 18, Issue 3, April 2011, pages 210-
217
 The Effect of Simultaneous Addition of Ca and Sr on the Microstructure and
Tensile Properties of A357-20% Al2O3 Composite, Mechanics of Advanced
Materials and Structure, Volume 18, Issue 3, April 2011, pages 201-209
 The effect of strontium on the microstructure and wear properties of
A356–10%B4C cast composites, Materials & Design, Volume 31, Issue 4, April
2010, Pages 2187-2195
 Microstructural evolution during isothermal aging and strain-induced
transformation followed by isothermal aging in Co-Cr-Mo-C alloy: A

4. comparative study, Materials Science and Engineering: A, Volume 527, Issues
16–17, 25 June 2010, Pages 4082-4091
 Rejuvenation of degraded first stage gas turbine nozzle by heat treatment,
Journal of Alloys and Compounds, Volume 497, Issues 1–2, 14 May 2010, Pages
360-368
 The microstructure, hardness and tensile properties of a new super high
strength aluminum alloy with Zr addition, Materials & Design, Volume 31, Issue
9, October 2010, Pages 4450-4456
 Effect of isothermal aging on the microstructural evolution of Co–Cr–
Mo–C alloy, Materials Science and Engineering: A, Volume 527, Issues 24–25,
25 September 2010, Pages 6494-6500
 Heat treatment effect on the microstructure, tensile properties and dry
sliding wear behavior of A356–10%B4C cast composites, Materials & Design,
Volume 31, Issue 9, October 2010, Pages 4414-4422
 The effect of strontium on the microstructure, porosity and tensile
properties of A356–10%B4C cast composite, Materials Science and Engineering:
A, Volume 517, Issues 1–2, 20 August 2009, Pages 170-179
 The effect of Al–5Ti–1B on the microstructure, hardness and tensile
properties of Al2O3 and SiC-containing metal–matrix composites, Materials
Science and Engineering: A, Volume 485, Issues 1–2, 25 June 2008, Pages 210-
217
HONORS AND AWARDS
Certificate of Reviewing- Journal of Materials and Design, March 2014
STANDARDS FAMILIARITY
API 580, 581, 579, 510, 570, 572, 574, 653, 575, 945 and Familiar with Key of steel,
Aluminum and Magnesium, ASTM standards, ASME Code SEC II & IV & AME PCC I,
II and III
PROFESSIONAL REFEREES
Bill Joe A.R.Adeli
Research Support Engineer, UNSW Manager of AIM Department, TECHINCO
Email: w.joe@unsw.edu.au Email: a_r_adeli@yahoo.com
Phone: +61 (0)2 9385 7287 Phone: +98 21-88529728