Here are some ideas for how to achieve criteria 2 and 3 of the project brief:
Criteria 2: Seek permission and include school in the process.
- Meet with Miss Buckley to present your plan and get formal approval.
- Work with the school administration to ensure proper permissions and compliance.
Criteria 3: Create a plan to ensure spouting and tank are looked after.
Resources:
- Maintenance schedule template
- Contact info for local plumbers/tradespeople
Tools:
- Create a sign-up sheet for weekly checks/cleaning
- Designate student leaders for ongoing maintenance responsibilities
- Work with teachers to incorporate checks into class routines
The key is developing a
Successful LEED Projects in the Southwestjwalleisa
This document discusses several LEED certified projects in the Southwest completed by the architecture firm D/P/S. It provides case studies on schools, commercial, and university projects and lessons learned from each. Key aspects discussed include design strategies to achieve energy savings like increased insulation, efficient mechanical systems, water conservation measures and use of recycled and regional materials. Metrics provided include energy savings projections and recycling amounts. The document concludes with a discussion of a design-build middle school project and a commercial project featuring underfloor air distribution.
The newsletter provides updates for volunteers traveling to Haiti for Build It Week. Over 270 volunteers will help construct 130 homes and community facilities over the course of a week. Volunteers are reminded to prepare by reviewing the handbook, bringing necessary supplies like water and sun protection, and coordinating travel plans. The development work of Haven in Haiti is also outlined, focusing on long-term goals of education, healthcare, jobs and self-sufficiency beyond the home construction.
The document summarizes a project to rehabilitate the water storage tank for a small rural community. The 70-year-old privately owned tank was showing deterioration and rust. The project involved cleaning, repairing, and recoating the interior and exterior of the tank to restore safety and health. Funding was provided by the USDA Rural Development program. Lessons included the importance of thorough inspections and following confined space entry procedures.
New microsoft office power point presentationChandu Lalu
The document discusses the design of elevated water tanks, noting that they must be carefully designed to withstand various loads and stresses while preventing leakage, and outlines the objective of developing an expert system to aid in the design of liquid retaining structures using visual basic by accounting for factors like configuration, material, and loads. It also examines the loads that act on reinforced concrete chimneys and discusses joints in liquid retaining structures.
The document provides instructions for cleaning an anaerobic digester tank. Key steps include isolating the digester, removing as much material as possible, ventilating the space, following strict safety protocols like lock out tag out and confined space entry procedures, and pumping out remaining sludge and inert materials. The pumped sludge can be sent to grit removal, screening, storage tanks for dewatering, or direct land application depending on the disposal option selected. Reseeding from another source or slowly building up biomass over time are described as options for restarting digestion after cleaning is complete.
This document is an employee policy and procedure manual for an organization. It contains sections on code of conduct, leave policies, health and safety procedures, and policies regarding equipment, vehicle and technology use. The document establishes standards for professional behavior, timekeeping and leave requests. It also outlines procedures for accidents, purchasing and reimbursement. Overall it provides a comprehensive overview of the organization's policies and employees' responsibilities.
Successful LEED Projects in the Southwestjwalleisa
This document discusses several LEED certified projects in the Southwest completed by the architecture firm D/P/S. It provides case studies on schools, commercial, and university projects and lessons learned from each. Key aspects discussed include design strategies to achieve energy savings like increased insulation, efficient mechanical systems, water conservation measures and use of recycled and regional materials. Metrics provided include energy savings projections and recycling amounts. The document concludes with a discussion of a design-build middle school project and a commercial project featuring underfloor air distribution.
The newsletter provides updates for volunteers traveling to Haiti for Build It Week. Over 270 volunteers will help construct 130 homes and community facilities over the course of a week. Volunteers are reminded to prepare by reviewing the handbook, bringing necessary supplies like water and sun protection, and coordinating travel plans. The development work of Haven in Haiti is also outlined, focusing on long-term goals of education, healthcare, jobs and self-sufficiency beyond the home construction.
The document summarizes a project to rehabilitate the water storage tank for a small rural community. The 70-year-old privately owned tank was showing deterioration and rust. The project involved cleaning, repairing, and recoating the interior and exterior of the tank to restore safety and health. Funding was provided by the USDA Rural Development program. Lessons included the importance of thorough inspections and following confined space entry procedures.
New microsoft office power point presentationChandu Lalu
The document discusses the design of elevated water tanks, noting that they must be carefully designed to withstand various loads and stresses while preventing leakage, and outlines the objective of developing an expert system to aid in the design of liquid retaining structures using visual basic by accounting for factors like configuration, material, and loads. It also examines the loads that act on reinforced concrete chimneys and discusses joints in liquid retaining structures.
The document provides instructions for cleaning an anaerobic digester tank. Key steps include isolating the digester, removing as much material as possible, ventilating the space, following strict safety protocols like lock out tag out and confined space entry procedures, and pumping out remaining sludge and inert materials. The pumped sludge can be sent to grit removal, screening, storage tanks for dewatering, or direct land application depending on the disposal option selected. Reseeding from another source or slowly building up biomass over time are described as options for restarting digestion after cleaning is complete.
This document is an employee policy and procedure manual for an organization. It contains sections on code of conduct, leave policies, health and safety procedures, and policies regarding equipment, vehicle and technology use. The document establishes standards for professional behavior, timekeeping and leave requests. It also outlines procedures for accidents, purchasing and reimbursement. Overall it provides a comprehensive overview of the organization's policies and employees' responsibilities.
This document discusses water and products that use water such as water balloons, water guns, hoses, jet packs, taps, paint, cotton t-shirts, and paper. It also discusses hydroelectricity including advantages like a constant energy supply and disadvantages like high costs. Sustainability is addressed, how aboriginals were sustainable by using all parts of animals, and how water has helped British Columbia economically by providing jobs in dam building. Maps show dam locations and there is a bibliography and video on hydroelectricity production.
Done by Solid Minds group in Qatar Independent Technical School for Boys.
Concrete is a composite material composed of water, coarse granular material (the fine and coarse aggregate or filler) embedded in a hard matrix of material (the cement or binder) that fills the space among the aggregate particles and glues them together.
This module enables the students to study concrete properties in general through experiments done by the students.
Qatar is known to be a desert environment, free of fresh water. So why don’t we make use of rain in the northern places of Qatar and also sanitation. Our project idea is about purifying water that comes from rain and sewage and use it in agriculture.
In our project, we used a concrete tank that collects water with a filter inside to purifies water. Water will then pour and run through channels which feeds the green land.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less rainwater is able to seep into the ground to replenish groundwater supplies. Instead, groundwater is being overused to meet daily water needs.
- Storing rainwater in tanks and sumps allows it to be used throughout the year, and excess can be channeled underground to replenish groundwater. This helps ensure sufficient water supplies for future generations.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less water is able to seep back into the ground, reducing groundwater levels. Storing rainwater helps replenish underground water supplies.
- Simple techniques like collecting rainwater falling on rooftops in tanks or sumps can provide households with sufficient water for daily use and reduce reliance on groundwater, ensuring future water security.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less rainwater is able to seep into the ground to replenish underground water supplies. If water continues to be drawn from underground sources without being replenished, we will face a serious water crisis.
- Storing rainwater through simple rooftop collection systems allows water to be used throughout the year and helps replenish groundwater levels by allowing excess water to seep back into the earth.
Neera and her friend Jalaj discuss the wastewater treatment plant in their housing enclave. Over time, the community's borewells dried up due to overuse. Residents formed a Plot Owner's Association to address the issue. They hired experts who recommended installing recharge wells to replenish groundwater and implementing water conservation efforts. Meters were also installed to monitor usage. Eventually a biological wastewater treatment plant was built to further treat sewage and allow for irrigation reuse. The community's collaborative efforts successfully addressed their water challenges over many years.
Solar Water Distillation and PurificationHassan Raza
This document describes a solar water distillation and purification system designed by a group of students. The system uses solar energy to evaporate water which then condenses on the inside of a glass surface, purifying it in the process. The students coated the interior with black silicon to maximize heat absorption. They determined thin glass works better than thick for condensation. The system produces around 4 liters of water per day from a 2 by 4 foot panel, and efficiency could be increased by enlarging the panel or adding a parabolic trough deflector. The design uses inexpensive, locally available materials and could provide clean drinking water for remote areas lacking access.
This document contains an activity sheet from the Green Schools Network that provides several activities for students related to understanding water usage and conservation. The activities include tracing the water pipes in a school, mapping water flow, observing water meters and bills, exploring drainage paths, measuring rainfall, and telling a story about responsible water usage. The overall aim is to help students learn more about their local water systems and ways to reduce water waste.
All living things need water to survive. The human body is composed of 70% water and plants are 95% water. Water is essential for agriculture, industry, personal use, transportation, climate regulation and providing habitat. It exists in three states - liquid, solid, and gas. The water cycle involves evaporation, condensation, and precipitation through which water is recycled through the atmosphere and environment. Water conservation methods include fixing leaks, limiting water usage, rainwater harvesting, and preventing pollution to safeguard this vital resource.
DIY Wood Fired Cedar Hot Tub
Intro: DIY Wood Fired Cedar Hot Tub
Step 1: Find Source of Affordable, Clear Cedar Boards
Step 2: Cutting the Staves
Step 3: Stave Joinery
Step 4: Building the Floor
Step 5: Hot Tub Assembly
Step 6: Benches & Plumbing
Step 7: Filling the Tub
Step 8: Adding the Wood Stove .
Step 9: Enjoy Your Hot Tub & More Tips
Related Instructables
The document proposes a solution to purify salt water for consumption in poor, rural areas by using a simple distillation process. It involves heating salt water in a metal cup placed above a cardboard box lined with aluminum foil and containing a concave cardstock reflector. The rising water vapor would pass through a plastic tube into an empty bottle, where it would condense into fresh water for drinking. Research showed salt water contains 3.5% salt on average and distillation is an effective purification method using common, reusable materials. Key steps and materials for the design are outlined.
This document discusses various techniques for harvesting water through contour ditches, swales, ponds, and other systems. It begins by explaining how to lay out contour lines and dig swales to slow and spread water flow across landscapes. Methods for building ponds and collecting rainwater in barrels and cisterns are also covered. The document emphasizes observing sites carefully before intervening and maintaining natural water flows. It provides both rural and urban examples of water harvesting systems.
This document discusses different types of water storage tanks. It describes overhead tanks that are elevated on columns, underground tanks buried below ground, and tanks resting on the ground. The tanks can be made of reinforced concrete or steel and come in various shapes like circular, rectangular, or polygonal. Factors to consider when designing water tanks include strength to resist cracking, location based on usage, and size depending on water needs and rainfall patterns in the area. Water tanks are used to store water for purposes like drinking, gardening, firefighting, and flushing toilets.
Recovery and resilience after floods in Pakistan - November 2014Magnus Wolfe Murray
Really heavy rains for no more than 7 days in central Pakistan in September 2012 nearly 500,000 homes were completely destroyed, leaving almost 3.5m homeless and destitute. Most of these people had barely recovered from floods in August 2010. I am proud to say that DFID (UK tax payers money) has been the largest donor year on year in shelter, agriculture recovery and water-sanitation across this area, reaching almost a million people. I have started to include photos of these amazing people, because they are just that, and so inspiring and positive, always.
Room 6 at Nayland Primary School in Stoke, New Zealand learned about the importance of clean water and ways to conserve it. They noticed that the school shed wastes water when it rains and researched water storage systems. The students applied for and received funding to build a water tank at their school garden to collect rainwater from the shed roof and save water. They were excited to put the tank together and help make a change that will affect future water saving efforts at their school.
The document discusses the need to conserve water in India due to uncertain monsoons and growing populations straining water infrastructure. It provides seven tips for saving water such as turning off taps while brushing teeth, taking shorter showers, only running full loads in washing machines and dishwashers, washing cars with buckets instead of hoses, watering gardens in the morning or evening only, hand washing dishes to use less water and detergent, and teaching children about water scarcity through activities other than playing with water. The concluding message is that small changes in habits can help address water shortage problems.
Wilford School and Experience Marine Reserves wanted to monitor how much rubbish enters the oceans via the stormdrains. By installing LittaTraps in two stormdrains, they stopped 2680 pieces of rubbish entering our oceans!
Contact : www.stormwater360.co.nz for more information.
This document discusses various ways that water is used by humans. It begins by listing common daily uses of water like cooking, drinking, washing, and bathing. It then discusses unique recreational uses like water balloons and swimming. The document goes on to describe how water is obtained from surface sources like rivers and lakes as well as groundwater sources accessed through wells. It notes that water must be treated before human consumption. The document stresses the importance of conserving water and provides tips for doing so.
- The redevelopment of Wentworth Point aims to be eco-friendly and sustainable by using natural resources for construction and including features like water tanks, compost bins, and solar panels.
- The discovery centre will teach visitors about the community within Wentworth Point, Sydney, and globally, as well as the history of Wentworth Point.
- Sustainable practices at Wentworth Point include using solar power for lighting, outlets, heating, and cooling, collecting and filtering rainwater for drinking, irrigation, and hygiene, and composting food waste to use as fertilizer in gardens.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
This document discusses water and products that use water such as water balloons, water guns, hoses, jet packs, taps, paint, cotton t-shirts, and paper. It also discusses hydroelectricity including advantages like a constant energy supply and disadvantages like high costs. Sustainability is addressed, how aboriginals were sustainable by using all parts of animals, and how water has helped British Columbia economically by providing jobs in dam building. Maps show dam locations and there is a bibliography and video on hydroelectricity production.
Done by Solid Minds group in Qatar Independent Technical School for Boys.
Concrete is a composite material composed of water, coarse granular material (the fine and coarse aggregate or filler) embedded in a hard matrix of material (the cement or binder) that fills the space among the aggregate particles and glues them together.
This module enables the students to study concrete properties in general through experiments done by the students.
Qatar is known to be a desert environment, free of fresh water. So why don’t we make use of rain in the northern places of Qatar and also sanitation. Our project idea is about purifying water that comes from rain and sewage and use it in agriculture.
In our project, we used a concrete tank that collects water with a filter inside to purifies water. Water will then pour and run through channels which feeds the green land.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less rainwater is able to seep into the ground to replenish groundwater supplies. Instead, groundwater is being overused to meet daily water needs.
- Storing rainwater in tanks and sumps allows it to be used throughout the year, and excess can be channeled underground to replenish groundwater. This helps ensure sufficient water supplies for future generations.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less water is able to seep back into the ground, reducing groundwater levels. Storing rainwater helps replenish underground water supplies.
- Simple techniques like collecting rainwater falling on rooftops in tanks or sumps can provide households with sufficient water for daily use and reduce reliance on groundwater, ensuring future water security.
- Rainwater harvesting involves collecting and storing rainwater to prevent depletion of groundwater resources and water shortages.
- As populations and development have increased, less rainwater is able to seep into the ground to replenish underground water supplies. If water continues to be drawn from underground sources without being replenished, we will face a serious water crisis.
- Storing rainwater through simple rooftop collection systems allows water to be used throughout the year and helps replenish groundwater levels by allowing excess water to seep back into the earth.
Neera and her friend Jalaj discuss the wastewater treatment plant in their housing enclave. Over time, the community's borewells dried up due to overuse. Residents formed a Plot Owner's Association to address the issue. They hired experts who recommended installing recharge wells to replenish groundwater and implementing water conservation efforts. Meters were also installed to monitor usage. Eventually a biological wastewater treatment plant was built to further treat sewage and allow for irrigation reuse. The community's collaborative efforts successfully addressed their water challenges over many years.
Solar Water Distillation and PurificationHassan Raza
This document describes a solar water distillation and purification system designed by a group of students. The system uses solar energy to evaporate water which then condenses on the inside of a glass surface, purifying it in the process. The students coated the interior with black silicon to maximize heat absorption. They determined thin glass works better than thick for condensation. The system produces around 4 liters of water per day from a 2 by 4 foot panel, and efficiency could be increased by enlarging the panel or adding a parabolic trough deflector. The design uses inexpensive, locally available materials and could provide clean drinking water for remote areas lacking access.
This document contains an activity sheet from the Green Schools Network that provides several activities for students related to understanding water usage and conservation. The activities include tracing the water pipes in a school, mapping water flow, observing water meters and bills, exploring drainage paths, measuring rainfall, and telling a story about responsible water usage. The overall aim is to help students learn more about their local water systems and ways to reduce water waste.
All living things need water to survive. The human body is composed of 70% water and plants are 95% water. Water is essential for agriculture, industry, personal use, transportation, climate regulation and providing habitat. It exists in three states - liquid, solid, and gas. The water cycle involves evaporation, condensation, and precipitation through which water is recycled through the atmosphere and environment. Water conservation methods include fixing leaks, limiting water usage, rainwater harvesting, and preventing pollution to safeguard this vital resource.
DIY Wood Fired Cedar Hot Tub
Intro: DIY Wood Fired Cedar Hot Tub
Step 1: Find Source of Affordable, Clear Cedar Boards
Step 2: Cutting the Staves
Step 3: Stave Joinery
Step 4: Building the Floor
Step 5: Hot Tub Assembly
Step 6: Benches & Plumbing
Step 7: Filling the Tub
Step 8: Adding the Wood Stove .
Step 9: Enjoy Your Hot Tub & More Tips
Related Instructables
The document proposes a solution to purify salt water for consumption in poor, rural areas by using a simple distillation process. It involves heating salt water in a metal cup placed above a cardboard box lined with aluminum foil and containing a concave cardstock reflector. The rising water vapor would pass through a plastic tube into an empty bottle, where it would condense into fresh water for drinking. Research showed salt water contains 3.5% salt on average and distillation is an effective purification method using common, reusable materials. Key steps and materials for the design are outlined.
This document discusses various techniques for harvesting water through contour ditches, swales, ponds, and other systems. It begins by explaining how to lay out contour lines and dig swales to slow and spread water flow across landscapes. Methods for building ponds and collecting rainwater in barrels and cisterns are also covered. The document emphasizes observing sites carefully before intervening and maintaining natural water flows. It provides both rural and urban examples of water harvesting systems.
This document discusses different types of water storage tanks. It describes overhead tanks that are elevated on columns, underground tanks buried below ground, and tanks resting on the ground. The tanks can be made of reinforced concrete or steel and come in various shapes like circular, rectangular, or polygonal. Factors to consider when designing water tanks include strength to resist cracking, location based on usage, and size depending on water needs and rainfall patterns in the area. Water tanks are used to store water for purposes like drinking, gardening, firefighting, and flushing toilets.
Recovery and resilience after floods in Pakistan - November 2014Magnus Wolfe Murray
Really heavy rains for no more than 7 days in central Pakistan in September 2012 nearly 500,000 homes were completely destroyed, leaving almost 3.5m homeless and destitute. Most of these people had barely recovered from floods in August 2010. I am proud to say that DFID (UK tax payers money) has been the largest donor year on year in shelter, agriculture recovery and water-sanitation across this area, reaching almost a million people. I have started to include photos of these amazing people, because they are just that, and so inspiring and positive, always.
Room 6 at Nayland Primary School in Stoke, New Zealand learned about the importance of clean water and ways to conserve it. They noticed that the school shed wastes water when it rains and researched water storage systems. The students applied for and received funding to build a water tank at their school garden to collect rainwater from the shed roof and save water. They were excited to put the tank together and help make a change that will affect future water saving efforts at their school.
The document discusses the need to conserve water in India due to uncertain monsoons and growing populations straining water infrastructure. It provides seven tips for saving water such as turning off taps while brushing teeth, taking shorter showers, only running full loads in washing machines and dishwashers, washing cars with buckets instead of hoses, watering gardens in the morning or evening only, hand washing dishes to use less water and detergent, and teaching children about water scarcity through activities other than playing with water. The concluding message is that small changes in habits can help address water shortage problems.
Wilford School and Experience Marine Reserves wanted to monitor how much rubbish enters the oceans via the stormdrains. By installing LittaTraps in two stormdrains, they stopped 2680 pieces of rubbish entering our oceans!
Contact : www.stormwater360.co.nz for more information.
This document discusses various ways that water is used by humans. It begins by listing common daily uses of water like cooking, drinking, washing, and bathing. It then discusses unique recreational uses like water balloons and swimming. The document goes on to describe how water is obtained from surface sources like rivers and lakes as well as groundwater sources accessed through wells. It notes that water must be treated before human consumption. The document stresses the importance of conserving water and provides tips for doing so.
- The redevelopment of Wentworth Point aims to be eco-friendly and sustainable by using natural resources for construction and including features like water tanks, compost bins, and solar panels.
- The discovery centre will teach visitors about the community within Wentworth Point, Sydney, and globally, as well as the history of Wentworth Point.
- Sustainable practices at Wentworth Point include using solar power for lighting, outlets, heating, and cooling, collecting and filtering rainwater for drinking, irrigation, and hygiene, and composting food waste to use as fertilizer in gardens.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
National Security Agency - NSA mobile device best practices
Rain Water Tank Project Brief
1. Room 5 Project Brief
Water and Sustainability
Rain Water Tank
June 2009
2. • Our Take Action project focus is water and sustainability.
• We walked around and used a map of our school to identify where we see water being
wasted at our school that could be collected and used in a rain water tank.
PLUS MINUS INTERESTING
Some of the vegetable gardens are doing well and
We have vegetable gardens, which We noticed when we walked around some of them have lost a lot of vegetables. We
our school that there was a lot of have been learning about water supply in the city
we will be able to harvest the water not going anywhere around the compared to the country. We realise that the
vegetables to eat. Scout Hall. country has a more sustainable way of supplying
water, which we could copy.
What are the main Can we take action
How?
issues of concern? to solve this issue.
We could collect water off the roof, into
There is water that is not going into a
storm water drain. Yes. a water tank, which we could use to
water our plants.
Nanumea, Timothy, Semisi
3. Take Action project Brief.
What is to be done? We are going to put some spouting on the roof of the Scout Hall to
collect rain water off the roof to go into a rain water tank.
We are going to collect water and use it on plants and the gardens we’ve made and to prevent
water from going to the storm water drain. Using a water tank. This should prevent the grass getting
wet from the toilets.
Why should it be done? So that most of the water that falls at our school does not go to waste
and we can be more sustainable. We will be helping the environment by collecting water that could
be going down storm water drains. We are helping to prevent flooding.
Criteria
1. The Scout Hall site must be “prepared” to ensure the water will not go to waste.
2. We need to seek permission and include our school in the process.
3. Create a plan to ensure that the spouting and the water tank are looked after when they are installed.
How will this help the environment?
We are helping because the water that we collect is being used to water the plants in our school. By doing this, we are more sustainable. The water does not have to be sent to the water treatment plant or to travel along pipes to get
to our taps. We are not using electricity or chemicals to produce the water.
Allan, Ata, JR
4. Planning to achieve the brief
Project - Rain water tank
Timeframe- We are hoping to complete this before
the end of term three.
Budget - we need to do some research on what we
need and how much it will cost. We need to seek help to
get money for our project. We also need to talk to Miss
Buckley about what our school can give us.
David, Nikolao, Martin
5. Our proposed rain water tank plan
1. We need to ask permission from Miss Buckley if we can go ahead with the project.
We need to talk to her about who owns the Scout Hall and what the process is going
to be for us to allowed to go ahead with our project. We need to complete numbers
2, 3, 5, 6, 7 before we talk to her.
2. We need to research what type of water tank we need (Isaac, Deng & Sydney)
3. We need to decide on the best place to put the tank (Martin, Maseiga, Kham Za)
4. We need to research how much spouting we need and what kind of spouting will
suit our needs We need to go and visit Bunnings and ask someone to teach us about spouting and what we
might need for our project.
5. We need to research what size tank we need (Philip, Filimino, Sio)
6. We need to measure the space we want to put the spouting in (Jaydon, Timothy, Teuila)
7. We need to put together a plan of what we think it will look like (LIlly, Nikolao, Nanumea)
8. Then we can research the price of things we need and where we can get them from
9. We need to let the school know what our intentions are
10. We need to research and ask for help from tradespeople and people who could
donate money etc
Weimannia, Isaac, Tania
7. Ideas to help us decide where to put the water tank
Areas Advantages Disadvantages
We could collect more water
and it’s where most of the It would be in the way of
Middle water goes and it can also where people play soccer
prevent around the scout hall and the tank might break
from flooding
We would need a pipe
It wouldn’t be in the way because of the awning
Left side and the awning can and we’re not using pipes
shelter the tank we’re using spouting
There would be no shelter
It would be a good area
but Richard said that if we
because it’s straight and the
Right side spouting would be easy to
get a light coloured plastic
tank the water would still
clean be cool
8. We need 500L of water in our tank to last a dry spell of 4 weeks during the
Summer when there’s no rain. So we worked it by...
5days x 5L/day=5 x 5=25/week. 25L x 4=100L/4 weeks. 5 classes x 100L=500L.
But the tank won’t necessarily be full, so our tank could be bigger than this or
maybe it doesn’t need to be this big during January because we’re not at
school. We have collected data about the average rainfall in our area for each
month of the year.
April 165mm March 525mm Feb 149.5mm Jan= NO Rain
Dec 104mm Nov 71mm Oct 137mm Sep 144mm
Aug 262mm
July 404mm June 328.5mm May 205mm
We have calculated the area of one side of the roof to be 118 square metres.
We have sent this information to Richard so he could help us to work out how
long it would take to fill the tank.
We have not yet worked out the size of the tank we need yet because we are waiting
for a reply from Richard.
Toeutu, Fatu, Kham Za, Sio
9. Websites we could use to buy a water tank
http://www.devan.co.nz/ - Devan Group
http://www.tanks.co.nz/- Bailey Tanks
http://www.tanksalot.co.nz/- Tanks Alot
Hibiscus tanks-0800 428 265
http://sites.yellow.co.nz/site/uniclear/- Uniclear Tanks
http://www.galloway.co.nz/-Galloway international
http://www.fibreglasstanks.co.nz/-Fibreglass Tanks
http://www.megason.co.nz/- Megason Limited
11. http://www.hydroflow.co.nz/
The unique corrugations on the side walls of the Promax tank range give both extra strength
and contemporary look. Added bonus, proven fact. Strong polyethylene construction requires
no maintenance and no tainted tast
PM450
450ltr tank
Diameter - 880mm
Height - 820mm
Outlet - 20mm
PM1000
1000ltr tank
Diameter - 1030mm
Height - 1420mm
Outlet - 20mm
PM2000
2000ltr tank
Diameter - 1300mm
Height - 1735mm
Outlet - 25mm
12. http://sites.yellow.co.nz/site/wilsonplastics/
Storage%20Tank.html
ALL NEW
Polyethylene liquid Storage Tank
The TT1200 captures rain water
for recycling by fitting snugly
under any eave with your building
downpipe connecting directly into
it. It's 2m+ height makes it ideally
suited for gravity-fed garden
soaker hoses in both urban and
rural environments.
• Model: TT 1200
• Capacity: 1200 Litres
• Max. Height: 2160mm
• Diameter: 890mm
• Weight: 33 kg
13. http://www.devan.co.nz/
Devan Water Tanks are suitable for agricultural, commercial and domestic
applications. They are very competitively priced, extensively developed and
tested, and come with a 20 year warranty. Their generous material weight,
modern range of colours, and minimal installation requirements easily make
these tanks your first choice.
Capacity: 1,000 litres (220 gallons)
Width: 875mm
Height: 2.02 metres
Weight: 30kg
Outlet: 2 x 50mm (2 inch)
BSP fitting.
Capacity: 4,550 litres (1,000 gallons)
Width: 1.9 metres
Height: 2.0 metres
Weight: 112.5kg
Outlet: 1 x 50mm (2 inch)
S/S BSP fittings
14. http://
www.rainharvesting.com.
Corrosion resistant and sturdy, fibreglass tanks are a relatively
expensive but long-lasting option.
Site Preparation : Compacted cracker dust or compacted cement
stabilised sand or concrete pad
In Ground : Consult the manufacturer
Guarantee : Ask your supplier for a written one prior to purchase
Repairable : Yes, consult the manufacturer.
Suitability
Popular due to its lightweight material which
makes for easy site preparation and
installation. Poly tanks are now the most
common for household use and come in a
variety of shapes, sizes and colours.
Site Preparation : A base of cracker dust or
sand
In Ground : Yes, consult the manufacturer
Guarantee : 25 years, ask for the
manufacturers guarantee
Repairable : Yes, consult the manufacturer
15. Our meeting with Miss Buckley
We need to be able to share the following ideas with her:
Where we are thinking of putting the tank
Our plan, with measurements of the Scout Hall
The kinds of tanks we are thinking of using
The size of the tank we are thinking of getting
Places where we can get rain water tanks
We need to ask her the following questions:
Who owns the Scout Hall?
Are we allowed to put a rain water tank near the Scout Hall?
Can the Scout Hall be mended?
If we find out the cost of going ahead with this project, will the school be able to
pay for it or pay for some of it, if we can get some help from other places?
16. Planning to achieve the brief
How do we best achieve criteria two?
Resources?
Tools?
17. Planning to achieve the brief
How do we best achieve criteria three?
Resources?
Tools?