This document provides safety guidelines for using various power tools and hand tools. Key points include: always inspect tools for damage before use; wear proper protective equipment like safety glasses; keep tools in good condition; disconnect power tools when not in use; avoid distractions or startling others when tools are in use; and report any broken tools to a supervisor. Safety procedures involve keeping loose clothing and jewelry away from moving parts, and maintaining a safe distance from tools while in operation.

1. Always examine the tool for
damages before use.
TRUE

2. It is OK to wear loose clothing, dangling objects
and jewelry using hand tool.
FALSE

3. Keep cords and hoses away from heat, oil and
sharp edges.
TRUE

4. Use only tools and equipment in good condition.
TRUE

5. It is OK to make adjustments or clear a jam while
the power tool is running.
TRUE

6. If any tool breaks or malfunctions, report it to your
supervisor immediately.
TRUE

7. Before connecting to a power source, make sure
the power is on.
TRUE

8. Safety glasses shall always be worn whenever you
are using power hand tool.
TRUE

9. There are several types of power tools, including
electric, pneumatic, hydraulic.
FALSE

10. Never use electric tools in wet conditions.
TRUE

11. When not in use, power tools should be
disconnected.
TRUE

12. Keep safe distance between your hands and all
moving parts of the power tool.
TRUE

13. Don’t leave a power tool unattended while it is
running.
TRUE

14. It is OK to startle someone who is using a power
tool.
FALSE

15. Use safety guards exactly as they are supposed to
be used.
TRUE

16. When tightening a nut with an adjustable wrench,
always pull the wrench toward you; never push
the wrench away from you.
TRUE

17. Plastic covered handles on wire-cutting pliers may
be used to cut low-voltage live electrical wire.
TRUE

18. Screwdrivers may be used for purposes other than
driving or removing screws, for example as a
chisel.
FALSE

19. When selecting a standard screwdriver be certain
that the tip is almost as thick and as wide as the
slot of the head of a screw.
TRUE

20. When using a hacksaw, safety glasses must be
worn.
TRUE

21. When you are finished using a hacksaw, tension
should be eased.
FALSE